检索结果-南通市图书馆

Evaluation of the coefficient of lateral stress at rest of granular materials under repetitive loading conditions

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1709-1721页

作者： Heerym han Hyunwook Choo Junghee Park Department of Civil and Environmental Engineering Hanyang UniversitySeoul04763South Korea Department of Civil and Environmental Engineering Incheon National UniversityIncheon22012South Korea

Although the internal stress state of soils can be affected by repetitive loading,there are few studies evaluating the lateral stress(or K_(0))of soils under repetitive *** study investigates the changes in K_(0) and directional shear wave velocity(V_(s))in samples of two granular materials with different particle shapes during repetitive loading.A modified oedometer cell equipped with bender elements and a diaphragm transducer was developed to measure the variations in the lateral stress and the shear wave velocity,under repetitive loading on the loading and unloading *** study produced the following results:(1)Repetitive loading on the loading path resulted in an increase in the K_(0) of test samples as a function of cyclic loading number(i),and(2)Repetitive loading on the unloading path resulted in a decrease in K_(0) according to *** shear wave velocity ratio(i.e.V_(s)(HH)/V_(s)(VH),where the first and second letters in parentheses corresponds to the directions of wave propagation and particle motion,respectively,and V and H corresponds to the vertical and horizontal directions,respectively)according to i supports the experimental observations of this ***,when the tested material was in lightly over-consolidated state,there was an increase in K_(0) during repetitive loading,indicating that it was the initial K_(0),rather than the loading path,which is responsible for the change in K_(0).The power model can capture the variation in the K_(0) of samples according to ***,the K_(0)=1 line acts as the boundary between the increase and decrease in K_(0) under repetitive loading.

关键词： Coefficient of lateral stress at rest Repetitive loading Granular materials Shear wave velocity Stiffness anisotropy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

SAT-Based Automatic Searching for Differential and Linear Trails: Applying to CRAX

引用

Chinese Journal of Electronics 2024年第1期33卷 72-79页

作者： Yiyi han Caibing WANG Zhongfeng NIU Lei HU State Key Laboratory of Information Security Institute of Information Engineering Chinese Academy of Sciences School of Cyber Security University of Chinese Academy of Sciences

Boolean satisfiability problem(SAT) is now widely applied in differential cryptanalysis and linear cryptanalysis for various cipher *** generated many excellent results for some ciphers,for example,*** this research,we study the differential and linear propagations through the operations of addition,rotation and XOR(ARX),and construct the SAT *** apply the models to CRAX to search differential trails and linear trails *** this sense,our contnbution can be broadly divided into two *** give the bounds for differential and linear cryptanalysis of Alzette both up to 12 steps,by which we present a 3-round differential attack and a 3-round linear attack for *** construct a 4-round key-recovery attack for CRAX with time complexity289times of 4-round encryption and data complexity 225.

关键词： Ciphers Encryption Complexity theory Time complexity

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A semantic segmentation-based underwater acoustic image transmission framework for cooperative SLAM

引用

Defence Technology（防务技术） 2024年第3期33卷 339-351页

作者： Jiaxu Li Guangyao han Shuai Chang Xiaomei Fu School of Marine Science and Technology Tianjin UniversityTianjin 300072China

With the development of underwater sonar detection technology,simultaneous localization and mapping(SLAM)approach has attracted much attention in underwater navigation field in recent *** the weak detection ability of a single vehicle limits the SLAM performance in wide ***,cooperative SLAM using multiple vehicles has become an important research *** key factor of cooperative SLAM is timely and efficient sonar image transmission among underwater ***,the limited bandwidth of underwater acoustic channels contradicts a large amount of sonar image *** is essential to compress the images before ***,deep neural networks have great value in image compression by virtue of the powerful learning ability of neural networks,but the existing sonar image compression methods based on neural network usually focus on the pixel-level information without the semantic-level *** this paper,we propose a novel underwater acoustic transmission scheme called UAT-SSIC that includes semantic segmentation-based sonar image compression(SSIC)framework and the joint source-channel codec,to improve the accuracy of the semantic information of the reconstructed sonar image at the *** SSIC framework consists of Auto-Encoder structure-based sonar image compression network,which is measured by a semantic segmentation network's *** that sonar images have the characteristics of blurred target edges,the semantic segmentation network used a special dilated convolution neural network(DiCNN)to enhance segmentation accuracy by expanding the range of receptive *** joint source-channel codec with unequal error protection is proposed that adjusts the power level of the transmitted data,which deal with sonar image transmission error caused by the serious underwater acoustic *** results demonstrate that our method preserves more semantic information,with advantages over existing methods at the sa

关键词： Semantic segmentation Sonar image transmission Learning-based compression

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental and numerical study on dynamic mechanical behaviors of shale under true triaxial compression at high strain rate

引用

International Journal of Mining Science and Technology 2024年第2期34卷 149-165页

作者： Xiaoping Zhou Linyuan han Jing Bi Yundong Shou School of Civil Engineering Wuhan UniversityWuhan 430072China College of Civil Engineering Guizhou UniversityGuiyang 550025China

High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing *** effectively extract shale gas,it is important to understand the dynamic mechanical properties of *** experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this *** dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are *** results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate *** characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial ***,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of *** dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D *** numerical results are in good agreement with the experimental data.

关键词： Dynamic behaviors True triaxial compression High strain rates Dynamic failure mechanism PFC3D-FLAC3D coupled method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Photoinduced superlubricity on TiO_(2) surfaces

引用

Friction 2024年第3期12卷 428-438页

作者： Ke han Liran MA Yu TIAN Jianbin LUO State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China Received:16 September 2022/Revised:28 October 2022/Accepted:27 December 2022The author(s)2022.

Superlubricity control is of great interest in both industry and scientific research,and several methods have been proposed to achieve this *** this work,ultraviolet(UV)light was introduced into titanium dioxide(TiO_(2))and silicon nitride(Si_(3)N_(4))tribosystems to accomplish photoinduced *** friction coefficients(COFs)between Si_(3)N_(4) balls and TiO_(2) plates in the mixtures of sulfuric acid(H^(2)SO_(4))solution and glycerol solution were obviously reduced,and the system entered the superlubricity region(COFhan that with UV *** formation of silica(SiO_(2))layers on the surfaces of Si_(3)N_(4) balls and the elastohydrodynamic effects were determined to be fundamental to the low friction in this experiment,and the enhancement of the combination between the TiO_(2) surface and the hydroxy group of glycerol by UV illumination was the key to the photoinduced superlubricity in this *** findings showed one method for achieving superlubricity by introducing a light field that could be further applied to special working conditions.

关键词： light control friction superlubricity glycerol titanium dioxide(TiO_(2))

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A discussion of fatigue properties of notched specimens subjected to prestressing treatment machined from FGH4097

引用

Chinese Journal of Aeronautics 2024年第4期37卷 508-523页

作者： Rongxi SHI Dasheng WEI Le han Shun YANG School of Energy and Power Engineering Beihang UniversityBeijing 100191China Jiangxi Research Institute Beihang UniversityNanchang 330096China Research Institute of Aero-Engine Beihang UniversityBeijing 100191China

Experimental and numerical investigations were performed to reveal the effect of prestress on the fatigue properties of FGH4097 so as to quantitatively evaluate the overspeed benefit of the disc of aeroengine. A corresponding experiment was performed to examine the effect of prestress on the fatigue life of FGH97. A complete model describing the fatigue properties of the prestressed notch specimen was proposed. After the modification of mean stress, stress gradient and prestressing treatment, the model is finally verified by fatigue test of presstressed notch specimens machined from FGH4097 with satisfactory accuracy and good engineering applicability. The new model highlights that for the variable fatigue loads, the introduction of appropriate prestress is expected to benefit to the notch specimens and certainly to the disc of aeroengine regards of their fatigue properties. Both the calculation method of fatigue life parameters and the prestress correction model are proved to have good prediction accuracy.

关键词： Turbine blisk Overspeed test Prestress Fatigue life prediction FGH4097

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Hierarchical Spinning of Janus Textiles with Anisotropic Wettability for Wound Healing

引用

Research 2024年第1期2023卷 97-105页

作者： han Zhang Lingyu Sun Jiahui Guo Yuanjin Zhao Department of Rheumatology and Immunology Nanjing Drum Tower HospitalSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjingJiangsu 210096China Oujiang Laboratory(Zhejiang Lab for Regenerative Medicine Vision and Brain Health)Wenzhou InstituteUniversity of Chinese Academy of SciencesWenzhouZhejiang 325001China

Wound healing and tissue repair are recognized as basic human health problems *** to accelerate the reparative process are focused on developing functional wound ***,we present novel Janus textiles with anisotropic wettability from hierarchical microfluidic spinning for wound *** hydrophilic hydrogel microfibers from microfluidics are woven into textiles for freeze-drying treatment,followed by the deposition of electrostatic spinning nanofibers composed of hydrophobic polylactic acid(PLA)and silver *** electrospun nanofiber layer can be well coupled with the hydrogel microfiber layer to generate Janus textiles with anisotropic wettability due to the roughness of the hydrogel textile surface and the incomplete evaporation of PLA solution when reaching the *** wound treatment with the hydrophobic PLA side contacting the wound surface,the wound exudate can be pumped from the hydrophobic to the hydrophilic side based on the wettability differential derived drainage *** this process,the hydrophobic side of the Janus textile can prevent excess fluid from infiltrating the wound again,preventing excessive moisture and preserving the breathability of the *** addition,the silver nanoparticles contained in the hydrophobic nanofibers could impart the textiles with good antibacterial effect,which further promote the wound healing *** features indicate that the described Janus fiber textile has great application potential in the field of wound treatment.

关键词： silver spinning healing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prediction of lime utilization ratio of dephosphorization in BOF steelmaking based on online sequential extreme learning machine with forgetting mechanism

引用

International Journal of Minerals,Metallurgy and Materials 2024年第3期31卷 508-517页

作者： Runhao Zhang Jian Yang han Sun Wenkui Yang State Key Laboratory of Advanced Special Steel School of Materials Science and EngineeringShanghai UniversityShanghai 200444China

The machine learning models of multiple linear regression(MLR),support vector regression(SVR),and extreme learning ma-chine(ELM)and the proposed ELM models of online sequential ELM(OS-ELM)and OS-ELM with forgetting mechanism(FOS-ELM)are applied in the prediction of the lime utilization ratio of dephosphorization in the basic oxygen furnace steelmaking *** ELM model exhibites the best performance compared with the models of MLR and ***-ELM and FOS-ELM are applied for sequential learning and model *** optimal number of samples in validity term of the FOS-ELM model is determined to be 1500,with the smallest population mean absolute relative error(MARE)value of 0.058226 for the *** variable importance analysis reveals lime weight,initial P content,and hot metal weight as the most important variables for the lime utilization *** lime utilization ratio increases with the decrease in lime weight and the increases in the initial P content and hot metal weight.A prediction system based on FOS-ELM is applied in actual industrial production for one *** hit ratios of the predicted lime utilization ratio in the error ranges of±1%,±3%,and±5%are 61.16%,90.63%,and 94.11%,*** coefficient of determination,MARE,and root mean square error are 0.8670,0.06823,and 1.4265,*** system exhibits desirable performance for applications in actual industrial pro-duction.

关键词： basic oxygen furnace steelmaking machine learning lime utilization ratio dephosphorization online sequential extreme learning machine forgetting mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-physics multi-scale simulation of unique equiaxed-to-columnar-to-equiaxed transition during the whole solidification process of Al-Li alloy laser welding

引用

Journal of Materials Science & Technology 2024年第4期171卷 235-251页

作者： Chu han Ping Jiang Shaoning Geng Liangyuan Ren School of Mechanical Science and Engineering Huazhong University of Science&Technology(HUST)Wuhan430074China

In this study,a novel multi-physics multi-scale model with the dilute multicomponent phase-field method in three-dimensional(3D)space was developed to investigate the complex microstructure evolu-tion in the molten pool during laser welding of Al-Li *** accurately compute mass data within both two and three-dimensional computational domains,three efficient computing methods,including central processing unit parallel computing,adaptive mesh refinement,and moving-frame algorithm,were *** was placed on the distinctive equiaxed-to-columnar-to-equiaxed transition phenomenon that occurs during the entire solidification process of Al-Li alloy laser *** results indi-cated that the growth distance of columnar grains that epitaxially grew from the base metal(BM)de-creased as the nucleation rate *** the nucleation rate increased,the morphology of the newly formed grains near the fusion boundary(FB)changed from columnar to equiaxed,and newly formed equiaxed grains changed from having high-order dendrites to no obvious dendrite *** the nucleation rate was sufficiently high,non-dendritic equiaxed grains could directly form near the FB,and there was nearly no epitaxial growth from the ***,simulation results illustrated the com-petition among multiple grains with varying orientations that grow in 3D space near the ***,how equiaxed grain bands develop was *** equiaxed band not only hindered the growth of early columnar grains but also some of its grains could grow epitaxially to form new columnar *** predicted results were in good agreement with experimental measurements and observations.

关键词： Laser welding Al-Li alloy Equiaxed-to-columnar-to-equiaxed transition Multi-physics multi-scale model Multicomponent alloys 3D phase-field model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enhanced corrosion resistance of epoxy resin coating via addition of CeO_(2) and benzotriazole

引用

Chinese Journal of Chemical Engineering 2024年第3期67卷 89-96页

作者： Xu han Ruijie Guo Baolong Niu Hong Yan College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Interface Science and Engineering in Advanced Materials Ministry of EducationTaiyuan University of TechnologyTaiyuan 030024China

The use of fillers to enhance the corrosion protection of epoxy resins has been widely *** this work,cerium dioxide(CeO_(2))and benzotriazole(BTA)were introduced into an epoxy resin to enhance the corrosion resistance of Q235 carbon *** electron microscopy results indicated that the CeO_(2) grains were rod-like and ellipsoidal in shape,and the distribution pattern of BTA was analyzed by energy dispersive *** dynamic potential polarization curve proved the excellent corrosion resistance of the composite epoxy resin with CeO_(2) and BTA co-addition,and electrochemical impedance spectroscopy test analysis indicated the significantly enhanced long-term corrosion protection performance of the composite *** the optimal protective performance was provided by the coating containing 0.3%(mass)CeO_(2) and 20%(mass)BTA,which was attributed to the barrier performance of CeO_(2) particles and the chemical barrier effect of *** formation of corrosion products was analyzed using X-ray *** addition,the corrosion resistance mechanism of the coating was also discussed in detail.

关键词： Benzotriazole Cerium dioxide Corrosion resistance Carbon steel Epoxy resin coating Preparation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：