检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2021年第1期28卷 168-178页

作者： Mahmood Razzaghi Masoud Kasiri-Asgarani hamid Reza Bakhsheshi-Rad hamid ghayour Advanced Materials Research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran

A type of polymer/ceramic coating was introduced on a magnesium-based nanocomposite, and the nanocomposite was evaluated for implant *** microstructure, corrosion, and bioactivity of the coated and uncoated samples were *** alloying followed by sintering was applied to fabricate the Mg–3Zn–0.5Ag–15NiTi nanocomposite ***, different contents of poly(lactic-co-glycolic acid)(PLGA) coatings were studied, and 10 wt% of PLGA content was *** scanning electron microscopy(SEM) images of the bulk nanocomposite showed an acceptable homogenous dispersion of the Ni Ti nanoparticles(NPs) in the Mg-based *** the in vitro bioactivity evaluation, following the immersion of the uncoated and coated samples in a simulated body fluid(SBF) solution, the Ca/P atomic ratio demonstrated that the apatite formation amount on the coated sample was greater than that on the uncoated ***, assessing the corrosion resistance indicated that the coatings on the Mg-based substrate led to a corrosion current density(icorr) that was considerably lower than that of the *** a condition revealed that the coating would provide an obstacle for the *** on this study, the PLGA/hardystonite(HT) composite-coated Mg–3Zn–0.5Ag–15NiTi nanocomposite may be suitably applied as an orthopedic implant biomaterial.

关键词： magnesium nanocomposite corrosion biocompatibility poly(lactic-co-glycolic acid) hardystonite

Electroplating of Ni/Co–pumice multilayer nanocomposite coatings: Effect of current density on crystal texture transformations and corrosion behavior

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2019年第10期26卷 1299-1310页

作者： Mehdi Boroujerdnia hamid ghayour Ahmad Monshi Reza Ebrahimi-Kahrizsangi Farid Jamali-Sheini Advanced Materials Research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran Advanced Surface Engineering and Nano Materials Research Center Department of PhysicsAhvaz BranchIslamic Azad UniversityAhvazIran

The present paper aims to investigate the influence of the current density in the electroplating process on the microstructure, crystal texture transformations, and corrosion behavior of Ni/Co pumice multilayer nanocomposite coatings. The Ni/Co pumice composite coatings were prepared by deposition of Ni, followed by the simultaneous deposition of pumice nanoparticles (NPs) in a Co matrix via an electroplating process at various current densities. Afterward, the morphology, size, topography, and crystal texture of the obtained samples were investigated. Furthermore, electrochemical methods were used to investigate the corrosion behavior of the produced coatings in a solution of 3.5wt% NaCl. The results indicated that increasing the plating current density changed the mechanism of coating growth from the cell state to the column state, in- creased the coating thickness, roughness, and texture coefficient (TC) of the Co (203) plane, and reduced the amount of pumice NPs incorporated into the Ni/Co pumice composite. The electrochemical results also indicated that increasing the current density enhanced the corrosion resistance of the Ni/Co pumice composite.

关键词： electroplating current density Ni/Co pumice corrosion resistance crystal texture of coating

整形外科用摩擦焊纯钛/镁合金螺钉的力学性能、腐蚀行为和生物相容性

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2020年第11期30卷 2952-2966页

作者： Mojtaba Sadeghi GOGHERI Masoud KASIRI-ASGARANI hamid Reza BAKHSHESHI-RAD hamid ghayour Mahdi RAFIEI Advanced Materials Research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran

在转速为1100、1200和1300 r/min条件下,通过旋转摩擦焊将生物可降解镁合金与商业纯钛异种焊接后加工成螺钉,研究异种接头的性能。金相分析结果表明钛/镁合金接头处连接较好。在镁合金一侧观察到焊缝中心区(WCZ)、动态再结晶区(DRX)、... 详细信息

在转速为1100、1200和1300 r/min条件下,通过旋转摩擦焊将生物可降解镁合金与商业纯钛异种焊接后加工成螺钉,研究异种接头的性能。金相分析结果表明钛/镁合金接头处连接较好。在镁合金一侧观察到焊缝中心区(WCZ)、动态再结晶区(DRX)、热力影响区(TMAZ)和局部变形区(PDZ)。在1300 r/min转速下制备的螺钉具有最高的拉伸强度和剪切强度,分别为173和103.2 MPa。钛/镁合金异种摩擦焊接头在含有Ti3Al的金属间化合物区附近失效。由于晶粒细化(8.57μm)和钛颗粒的影响,从镁合金一侧到焊缝区,硬度值逐渐增大;而钛一侧的硬度值保持不变。浸泡实验显示钛/镁合金接头的腐蚀速率高于纯钛与镁合金的腐蚀速率。此外,1300 r/min转速下制备的接头由于其更好的耐腐蚀性能,显示出更好的生物相容性和细胞活性(98.12%)。

关键词：镁合金商业纯钛摩擦焊剪切强度生物降解性

Ensemble Wind Power Prediction Interval with Optimal Reserve Requirement

在线全文

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第1期12卷 65-76页

作者： hamid Rezaie Cheuk Hei Chung Nima Safari the Saskatchewan Power Corporation(SaskPower) ReginaSaskatchewanCanada the Department of Electrical and Computer Engineering and Department of Human Biology University of TorontoTorontoON M5S 3G4Canada the Alberta Electric System Operator(AESO) CalgaryAlbertaCanada

Wind power prediction interval(WPPI)models in the literature have predominantly been developed for and tested on specific case ***,wind behavior and characteristics can vary significantly across ***,a prediction model that performs well in one case might underperform in *** address this shortcoming,this paper proposes an ensemble WPPI framework that integrates multiple WPPI models with distinct characteristics to improve *** important and often overlooked factor is the role of probabilistic wind power prediction(WPP)in quantifying wind power uncertainty,which should be handled by operating *** reserve in WPPI frameworks enhances the efficacy of *** this regard,the proposed framework employs a novel bi-layer optimization approach that takes both WPPI quality and reserve requirements into *** analysis with different real-world datasets and various benchmark models validates the quality of the obtained WPPIs while resulting in more optimal reserve requirements.

关键词： Ensemble model linear programming operating reserve optimal reserve requirement prediction interval probabilistic prediction renewable integration uncertainty representation wind power prediction(WPP)

Correlation between mechano-electronic features and scattering rates using deformation potential theory

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第2期76卷 166-181页

作者： Meryem Ziati Sanaa Lahlali hamid Ez-Zahraouy Laboratory of Condensed Matter and Interdisciplinary Sciences `Unitéde recherche labellisée CNRST'Faculty of SciencesMohammed V UniversityRabatMorocco Mohammed VI Polytechnic University(UM6P) BenGuerir 43150Morocco

This research paper provides valuable insight into the electronic,mechanical and transport properties of the Sr_(2)RuO_(2)F_(2)*** study shows that the Sr_(2)RuO_(4)compound exhibits a metallic ground state and that the energy gap widens with oxygen substitution with *** concept of absolute deformation potential and its correlation with band energies and strains is explained using deformation potential *** paper also examines the mechanical features of Sr_(2)RuO_(2)F_(2)using the Voigt-Reuss-Hill approximation method and analyzes its elastic constants,bulk modulus and shear modulus,indicating flexibility and suitability for optoelectronic *** role of acoustic phonons in scattering rates and carrier mobility in Sr_(2)RuO_(2)F_(2)and its potential for phonon-mediated superconductivity is *** intrinsic resistivity of electrons and holes under strain and its potential impact on superconductivity and electrical resistivity are also *** insight provided by this study contributes to the current understanding of Sr_(2)RuO_(2)F_(2),and its potential applications.

关键词： density functional theory deformation potential theory scattering rates carrier mobility intrinsic resistivity

Characteristics of turbulent flow in 3-D pools in the presence of submerged rigid vegetation in channel bed

在线全文

学校读者我要写书评

暂无评论

Journal of Hydrodynamics 2024年第1期36卷 158-169页

作者： Kourosh Nosrati Hossein Afzalimehr Jueyi Sui hamid Reza Reisifar Natural Disasters Prevention Research Center Faculty of Civil EngineeringIran University of Science and TechnologyTehranIran School of Engineering University of Northern British ColumbiaPrince GeorgeCanada

In this study,the interaction between 3-D bedforms and submerged rigid vegetation has been *** laboratory experiments were conducted to study the distribution of flow velocity,Reynolds shear stress,turbulent kinetic energy,and skewness coefficients for a constant density of *** showed that the velocity profile in the pool section deviates from those in the upstream section of the *** has been found that the dip parameter varied between 0.6H and 0.9H depending on various factors including bed roughness,vegetation distribution,and pool entrance/exit ***,scattered vegetation in the pool and differences in slopes created non-uniform flow ***,in the wake region behind each vegetated element,flow velocity reduced significantly,and small-scale eddies are formed,causing increased *** decreasing the entrance slope and bed roughness,relatively uniform flow and weaker turbulence was resulted,but the random distribution of vegetated elements counteracted this balance and intensified *** the decrease in the pool entrance slope,the contribution of sweep event decreased and the contribution of ejection event increased.

关键词： Submerged rigid vegetation 3-D pool Reynolds shear stress skewness coefficients

A New Approach for the Determination of Metronidazole Using Switchable Solvent Coupled with Au-MWCNTs-Modified Electrochemical Sensor

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Analysis and Testing 2024年第2期8卷 191-200页

作者： Siamak Kiani Shahvandi Mehrorang Ghaedi hamid Ahmar Chemistry Department Yasouj UniversityYasouj75918-74831Iran Chemistry Department University of ZabolZabol98615-538Iran

In this work,a new liquid-phase microextraction method coupled with an electrochemical technique using a switchable solvent was proposed for the determination of *** extraction solvent used was dipropylamine(DPA),which exhibited switchable *** means that it can become miscible or immiscible when in contact with carboxylic acids in the aqueous *** metronidazole was then measured using a glassy carbon electrode that was modified with Au-multiwalled carbon nanotubes(MWCNTs).The eff ect of diff erent parameters such as the type and amount of trigger,the addition of salt,and the volume of extraction solvent on the e fficiency of switchable hydrophilic solvent-based liquid-phase microextraction(SHS-LPME)was investigated using the one-factor-at-a-time *** optimizing the conditions,the linear calibration curve was obtained in the concentration range of 0.005–250μmol/***,the limit of quantification(LOQ)of 0.005μmol/L and the limit of detection(LOD)of 0.0015μmol/L were obtained,respectively.

关键词： Switchable solvent Metronidazole Liquid-phase microextraction Electrochemical techniques

Advanced Optimized Anomaly Detection System for IoT Cyberattacks Using Artificial Intelligence

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第2期78卷 1525-1545页

作者： Ali hamid Farea Omar H.Alhazmi Kerem Kucuk Department of Computer Science Taibah UniversityMedina42315Saudi Arabia Department of Software Engineering Kocaeli UniversityKocaeli41001Turkey

While emerging technologies such as the Internet of Things(IoT)have many benefits,they also pose considerable security challenges that require innovative solutions,including those based on artificial intelligence(AI),given that these techniques are increasingly being used by malicious actors to compromise IoT *** an ample body of research focusing on conventional AI methods exists,there is a paucity of studies related to advanced statistical and optimization approaches aimed at enhancing security *** contribute to this nascent research stream,a novel AI-driven security system denoted as“AI2AI”is presented in this ***2AI employs AI techniques to enhance the performance and optimize security mechanisms within the IoT *** also introduce the Genetic Algorithm Anomaly Detection and Prevention Deep Neural Networks(GAADPSDNN)sys-tem that can be implemented to effectively identify,detect,and prevent cyberattacks targeting IoT ***,this system demonstrates adaptability to both federated and centralized learning environments,accommodating a wide array of IoT *** evaluation of the GAADPSDNN system using the recently complied WUSTL-IIoT and Edge-IIoT datasets underscores its *** an impressive overall accuracy of 98.18%on the Edge-IIoT dataset,the GAADPSDNN outperforms the standard deep neural network(DNN)classifier with 94.11%***,with the proposed enhancements,the accuracy of the unoptimized random forest classifier(80.89%)is improved to 93.51%,while the overall accuracy(98.18%)surpasses the results(93.91%,94.67%,94.94%,and 94.96%)achieved when alternative systems based on diverse optimization techniques and the same dataset are *** proposed optimization techniques increase the effectiveness of the anomaly detection system by efficiently achieving high accuracy and reducing the computational load on IoT devices through the adaptive selection of active features.

关键词： Internet of Things security anomaly detection and prevention system artificial intelligence optimization techniques

Effects of heat stress and long photoperiod on the prostate of rats

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Asian pacific Journal of Reproduction 2024年第4期13卷 187-196页

作者： hamid Reza Ghaffari Javad Poursamimi Department of Basic Sciences School of MedicineZabol University of Medical SciencesZabolIran Department of Immunology Faculty of MedicineZabol University of Medical SciencesZabolIran

Objective:To examine light and heat effects on the morphological,histological,and micrometric structure of the prostate of ***:Thirty adult male rats were divided into three *** control group was kept under 20℃-22℃ and an artificial 12 h/12 h day/night cycle;the temperature group was under normal light and at(42±1)℃ heat for 4 to 5 h daily,and the light group was exposed to 8 h/16 h day/night cycle with 20℃-22℃.Rats were weighed five times(at the beginning of the study and every seven days).Five milliliters(mL)of their peripheral blood were *** tissue staining was performed using the hematoxylin-eosin(H&E)stain and periodic acid-Schiff(PAS).In the following,tissue and cellular reactions to the PAS were ***:Folds were located entirely on the surface of the anterior lobe and periphery of the other *** secretory units in the anterior lobe were more than the lateral lobe.A strong reaction of the secretory cells to the PAS was *** serum levels of the light group also significantly increased compared to the control group(P<0.05).The most histometric changes of the lobes were established in the lateral *** stress resulted in a significant decrease in testosterone levels and transformed prostate *** epithelium and parenchyma to scaffold ratio in the temperature group ***:Maximum and minimum changes in the ventral lobe happened under the ascent of temperature and light,*** ventral lobe in the study of prostatic hyperplasia should be more considered.

关键词： Prostate Heat stress Photoperiod Histology Testosterone Rat

Evolution of biomass particles during pelletization process

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 182-187页

作者： hamid Rezaei Maryam Tajilrou Jun Sian Lee Kanages Singaraveloo Anthony Lau Shahab Sokhansanj Biomass and Bioenergy Research Group Department of Chemical and Biological EngineeringUniversity of British ColumbiaVancouverCanada

Pulverizing is an essential unit operation in co-firing biomass with *** are only compatible with pellet forms of fibrous biomass materials and crush them down to their original forming particle *** is why the data on the size distribution of the particles forming a biomass pellet is crucial to achieving optimum combustion *** current study determines the internal particle size distribution of pellets after wet disintegration,following Iso 17830 standard,and aims to suggest improvements to the mentioned standard based on new measured *** were carried out on white wood pellets(no bark)and brown wood pellets containing bark at four water temperatures:20,40,60,and 95℃,with or without *** particle size distribution of the pre-pelletizer wood particles was also measured and compared with particles in the formed *** water temperature of 20℃ was found to be adequate for the complete disintegration of pellets,and no mechanical stirring was *** 30% of particles in the disintegrated pellets were 0.5-1.0 *** changes the particle size distribution to smaller *** disintegrated bark pellets contained more fines than white pellets.

关键词： Wood pellets Particle sizes distribution Wet disintegration Stirring Water temperature