检索结果-南通市图书馆

Cr-poisoning under open-circuit condition in LaNi_(0.6)Fe_(0.4)O_(3-δ)-based nano composite cathodes for solid oxide fuel cells prepared by infiltration process

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2016年第5期26卷 1367-1372页

作者： Yeong-Ju CHOE Jeong-Uk SEO Kyoung-jin LEE Min-jin LEE hae-jin hwang Department of Materials Science and Engineering Inha University

LaNi（0.6）Fe（0.4）O（3-δ）（LNF） powders were synthesized by the glycine-nitrate process and LNF-gadolinium-doped ceria （GDC） nanocomposite cathodes for solid oxide fuel cells （SOFCs） were fabricated by infiltration from LNF porous backbones. Electrochemical properties and Cr-poisoning behavior of LNF-GDC cathodes were studied. Single phase perovskite LNF could be obtained at the glycine to nitrate molar ratio of 1：1. The polarization resistance of the LNF-GDC nanocomposite cathode was significantly decreased in comparison with the LNF. This phenomenon was associated with enhanced catalytic activity and enlarged triple-phase boundary （TPB） length by GDC nano particles. In addition, the nanocomposite cathode showed good Cr tolerance under open circuit condition. The LNF-GDC nanocomposite cathodes were expected for use as a potential cathode in intermediate- temperature solid oxide fuel cells （IT-SOFC）.

关键词： Cr-poisoning perovskite infiltration solid oxide fuel cell LaNi0.6Fe0.4O3-δ

Saccharomyces boulardii as a single trigger of food protein-induced enterocolitis syndrome: Seven case reports

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2025年第6期13卷 35-40页

作者： jin-Bok hwang Hyo-Jeong Jang Department of Pediatrics Keimyung University School of MedicineDongsan Medical CenterDaegu 42601South Korea

BACKGROUND Food protein-induced enterocolitis syndrome(FPIES)is the most serious type of non-immunoglobulin E(IgE)-mediated food allergic reaction manifesting as sepsis-like symptom,which can lead to *** boulardii(***),a probiotic prescribed frequently in clinical settings,has been reported to trigger FPIES in an infant with soy-triggered *** this report,we describe a new clinical FPIES in which *** was the sole triggering factor of acute FPIES adverse reaction in seven healthy *** SUMMARY Seven FPIES cases triggered by only *** were gathered from 2011 to the *** of the patients had previously experienced any allergic reaction to cow’s milk,soy,or complementary *** age of the patients was 4-10-months old,and the symptoms of FPIES developed after ingestion of ***,which is mostly prescribed for the treatment of gastroenteritis or antibiotic-associated *** patients experienced severe repetitive vomiting 1-3 hours after *** *** lethargy,marked pallor,and cyanosis were also *** IgE-mediated hypersensitivity developed in any *** was followed by initial intense vomiting in approximately 5-10 hours after *** ingestion,and only one case showed bloody,purulent,and foul-smelling *** patients stabilized quickly,mostly within 6 *** got all improved within 24 hours after discontinuation of *** *** can be the sole trigger of acute FPIES and be prescribed cautiously even in healthy children without FPIES.

关键词： Food protein-induced enterocolitis syndrome Food hypersensitivity Saccharomyces boulardii Probiotics Child Case report

Preparation and Characterization of Porous PVdF-HFP/clay Nanocomposite Membranes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2010年第7期26卷 633-638页

作者： Mi jin Koh hae Young hwang Deuk Ju Kim Hyeng Jun Kim Young Taik Hong Sang Yong Nam School of Materials Science and Engineering Engineering Research Institutei-Cube CenterGyeongsang National UniversityJinjuKorea Fuel Cell Research Center Korea Institute of Science and TechnologySeoul 136-791Korea Energy Material Research Center Korea Research Institute of Chemical TechnologyDaejeon 305-600Korea

Polyvinylidene fluoride-hexafluoropropylene （PVdF-HFP） / clay nanocomposite membranes were prepared by phase inversion method through controlling retention time to apply for a lithium ion secondary batteries. Increased membrane porosity with macrovoids was observed at increasing retention time. Partially intercalated structures of PVdF-HFP/clay nanocomposite membranes were confirmed by X-ray diffraction （XRD） analysis. PVdF-HFP membranes containing various kind of clay showed the increase of membrane modulus compared to the pristine PVdF-HFP membrane.

关键词： PVdF-HFP Porosity Mechanical properties Clay Separator

Apolipoprotein A-I binding protein-mediated neuroprotection in glaucomatous neuroinflammation and neurodegeneration

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第5期20卷 1414-1415页

作者： Sinwoo hwang Seunghwan Choi Soo-Ho Choi Keun-Young Kim Yury I.Miller Won-Kyu Ju Hamilton Glaucoma Center and Shiley Eye Institute The Viterbi Family Department of OphthalmologyUniversity of California San DiegoLa JollaCAUSA Department of Medicine University of California San DiegoLa JollaCAUSA National Center for Microscopy and Imaging Research Department of NeurosciencesUniversity of California San DiegoLa JollaCAUSA

Glaucoma is a multifactorial eye disorder that can cause vision loss and irreversible blindness,affecting individ uals aged 40 to 80 yea rs *** to the aging population,it is expected that the number of people affected by glaucoma will surpass 111 million by 2040 as the disease becomes more *** primarily contributes to optic nerve axon loss and the progressive degeneration of retinal ganglion cells (RGCs),subsequently leading to vision impairment.

关键词： irreversible pass primarily

Aligned Ion Conduction Pathway of Polyrotaxane‑Based Electrolyte with Dispersed Hydrophobic Chains for Solid‑State Lithium–Oxygen Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 169-186页

作者： Bitgaram Kim Myeong‑Chang Sung Gwang‑Hee Lee Byoungjoon hwang Sojung Seo Ji‑Hun Seo Dong‑Wan Kim Department of Materials Science and Engineering Korea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea School of Civil Environmental and Architectural EngineeringKorea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea Materials Science and Chemical Engineering Center Institute for Advanced Engineering(IAE)Yongin 17180Republic of Korea

A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety *** study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves ***-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain *** this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 *** situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen *** situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability *** present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.

关键词： Solid polymer electrolyte Lithium-oxygen batteries Polyrotaxane ion conductivity Hydrophobic chain

Effect of reduction in area per pass on strain distribution and microstructure during caliber rolling in twinning-induced plasticity steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2020年第1期27卷 62-74页

作者： Joong-ki hwang Sung jin Kim School of Mechanical Engineering Tongmyong UniversityBusan 48520Republic of Korea Department of Advanced Materials Engineering Sunchon National UniversitySuncheon 57922Republic of Korea

The effects of reduction in area(RA)per pass during caliber rolling on microstructure and strain distribution of twinninginduced plasticity steel have been investigated to find solutions to make a more homogeneous material along the radial direction for wire rod *** steel wires subjected to an average RA per pass of 2.5%(skin pass caliber rolling)and 10.0%(conventional caliber rolling)were *** skin pass caliber-rolled wire was characterized as a duplex fiber texture of majorand minor.and the textures were almost same at/between center and surface area,which is totally different from those of conventional caliber rolling and wire *** skin pass caliber rolling led to more homogeneous microstructure and mechanical properties along the radial direction in comparison with the conventional caliber rolling and wire drawing due to the more homogeneous Hall-Petch hardening,dislocation hardening,and texture behavior with area,resulting in higher formability.

关键词： Twinning-induced plasticity steel Caliber rolling Deformation twin Reduction in area Skin pass

Review on Tidal Energy Technologies and Research Subjects

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2020年第1期34卷 137-150页

作者： Chul Hee JO Su jin hwang Department of Naval Architecture and Ocean Engineering Inha University

Tidal current power is one of the promising and reliable renewable energies with the advantage of continuous and predictable resource. It can make stable electricity regardless of weather conditions or seasons all year around. The required technologies for tidal current power in the ocean have been developed for years and now recognized that it could be commercialized after intensive field tests and successful demonstrations. There are several tidal farm development projects in the world, such as the MeyGen project in UK with its commercialization at hand. However, various research subjects in the tidal current energy field are seeking improvements and industrialization of tidal current power in terms of economy and technical reliability. This paper introduces the resource assessment procedure of tidal energy that has been applied in Korea coastal regions. The key research subjects for tidal current power together with the interaction effect of multi-arrangement is described. Also, this paper is to introduce the research output of each subject such as turbine design, experimental validation, turbine interaction and wake, multi-array module, FSI (fluid-structure interaction), and duct application.

关键词： tidal current power resource assessment turbine design experimental validation turbine interaction multi arrangement FSI(fluid-structure interaction)

Evolution of microstructure and mechanical characteristics of(CrFeNiCu)_(100-x)Ti_(x)high-entropy alloys

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2023年第9期42卷 3088-3098页

作者： Yusupov Dilshodbek Sung hwang Hong Muhammad Aoun Abbas Gyeol Chan Kang hae jin Park Elyorjon Jumaev Wei-Min Wang Ki Buem Kim Department of Nanotechnology and Advanced Materials Engineering Sejong UniversitySeoul05006Republic of Korea Almalyk Mountain Mining Complex(MMC) Almalyk City110100Republic of Uzbekistan School of Materials Science and Engineering Shandong UniversityJinan250100China Department of Chemical Engineering New Uzbekistan UniversityTashkent100007Republic of Uzbekistan

Cr Fe Ni Cu)_(100-x)Ti_(x)(x=0,3,5,7 and 10;at%)high-entropy alloys have been designed by the consideration of the thermophysical relationship between Ti and other principal elements to investigate the influence of Ti on the microstructural evolution and mechanical properties of(CrFeNiCu)_(100-x)Ti_(x)high-entropy *** addition of Ti content in HEAs leads to a change in phase formation from dual-phase(FCC1 and FCC2,FCC:face-centered cubic)to the mixture of FCC1,FCC2 phases,and an additional body-centered cubic(BCC)*** yield strength and Vickers hardness of the alloys are enhanced from 291 to 1511 MPa and HV 134 to HV 531,respectively,which depends strongly on the volume fraction of BCC *** the one hand,the plasticity of the alloys reduces from 45.00%to 24.09%,but it could be considered reasonable *** results revealed that the addition of a minor alloying element in high-entropy alloys with consideration of thermophysical parameters led to the formation of a multiple solid solution structure with excellent mechanical properties.

关键词： High-entropy alloy(HEA) Microstructure Mechanical properties Theoretical parameters

Thick free-standing electrode based on carbon-carbon nitride microspheres with large mesopores for high-energy-density lithium-sulfur batteries

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2021年第3期3卷 410-423页

作者： Hui-Ju Kang Tae-Gyu Lee Heejin Kim Jae-Woo Park Hyun jin hwang Hyeonseok hwang Kwang-Suk Jang hae jin Kim Yun Suk Huh Won Bin Im Young-Si Jun Department of Advanced Chemicals&Engineering Chonnam National UniversityBuk-guGwangjuRepublic of Korea Division of Analytical Science Korea Basic Science Institute(KBSI)Yuseong-guDaejeonRepublic of Korea School of Chemical Engineering Chonnam National UniversityBuk-guGwangjuRepublic of Korea Department of Applied Chemistry Hanyang UniversityAnsanGyeonggi-doRepublic of Korea Department of Biological Engineering Inha UniversityNam-guIncheonRepublic of Korea Division of Materials Science and Engineering Hanyang UniversitySeongdong-guSeoulRepublic of Korea

The development of sulfur cathodes with high areal capacity and high energy density is crucial for the practical application of lithium-sulfur batteries(LSBs).LSBs can be built by employing(ultra)high-loading sulfur cathodes,which have rarely been realized due to massive passivation and ***,microspheres of a carbon-carbon nitride composite(C@CN)with large mesopores are fabricated via molecular cooperative *** the C@CN-based electrodes,the effects of the large mesopores and N-functional groups on the electrochemical behavior of sulfur in LSB cells are thoroughly investigated under ultrahigh sulfur-loading conditions(>15 mgS cm^(-2)).Furthermore,for high-energy-density LSBs,the C@CN powders are pelletized into a thick free-standing electrode(thickness:500^m;diameter:11 mm)via a simple briquette process;here,the total amount of energy stored by the LSB cells is 39 mWh,corresponding to a volumetric energy density of 440 Wh L-1 with an areal capacity of 24.9 and 17.5 mAh cm^(-2) at 0.47 and 4.7 mA cm^(-2),respectively(at 24mgS cm^(-2)).These results have significantly surpassed most recent records due to the synergy among the large mesopores,(poly)sulfide-philic surfaces,and thick *** developed strategy with its potential for scale-up successfully fills the gap between laboratory-scale cells and practical cells without sacrificing the high areal capacity and high energy density,providing a solid foundation for the development of practical LSBs.

关键词： briquette process carbon nitride free-standing electrode high energy density lithium-sulfur batteries mesopores