检索结果-南通市图书馆

在线全文

学校读者我要写书评

暂无评论

RBCC引射模态准一维性能分析模型

推进技术 2006年第6期27卷 529-531,541页

作者：吕翔何国强刘佩进西北工业大学航天学院陕西西安710072

基于准一维非稳态流动方程建立了RBCC引射模态性能分析模型，充分考虑壁面摩擦、有限速率化学反应和质量添加等因素。模型采用MacCormack格式求解，很好的解决了计算引射比、考虑环境压强等问题。与实验结果的对比表明，本模型计算结果... 详细信息

基于准一维非稳态流动方程建立了RBCC引射模态性能分析模型，充分考虑壁面摩擦、有限速率化学反应和质量添加等因素。模型采用MacCormack格式求解，很好的解决了计算引射比、考虑环境压强等问题。与实验结果的对比表明，本模型计算结果的相对误差为5％～9％，发动机内的压强分布与实验结果基本一致，本模型可用于RBCC引射模态性能分析。

关键词：火箭基组合循环发动机引射模态性能分析

在线全文

学校读者我要写书评

暂无评论

CO_2激光烧蚀水所形成气蚀空穴机理研究

推进技术 2010年第1期31卷 115-118,128页

作者：崔村燕洪延姬文明何国强西北工业大学航天学院西安710072 装备指挥技术学院北京101416

分析了激光烧蚀液体时形成表面空穴的机理。利用高速相机获得CO2激光烧蚀蒸馏水的流场照片,对空穴的发展过程进行了分析,发现空穴的快速发展期在最初的100μs内,之后在几百μs内保持平衡。用简单模型计算了不同能流密度下,空穴平衡时的... 详细信息

分析了激光烧蚀液体时形成表面空穴的机理。利用高速相机获得CO2激光烧蚀蒸馏水的流场照片,对空穴的发展过程进行了分析,发现空穴的快速发展期在最初的100μs内,之后在几百μs内保持平衡。用简单模型计算了不同能流密度下,空穴平衡时的形状,并分析了模型的局限性。研究结果对于揭示激光烧蚀水产生推力的机理有重要意义,有利于促进水工质激光推进的发展。

关键词：激光推进水烧蚀空穴推力

Research on the flow stability and noise reduction characteristics of quasi-periodic elastic support skin

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 222-236页

作者： Lu Chen Shao-gang Liu Dan Zhao Li-qiang Dong Kai Li Shuai Tang Jin Cui Hong guo Department of Mechanical and Electrical Engineering Harbin Engineering UniversityHarbin150001China

To enhance flow stability and reduce hydrodynamic noise caused by fluctuating pressure,a quasiperiodic elastic support skin composed of flexible walls and elastic support elements is proposed for fluid noise *** arrangement of the elastic support element is determined by the equivalent periodic distance and quasi-periodic *** this paper,a dynamic model of skin in a fluid environment is *** influence of equivalent periodic distance and quasi-periodic coefficient on flow stability is *** results suggest that arranging the elastic support elements in accordance with the quasi-periodic law can effectively enhance flow ***,the hydrodynamic noise calculation results demonstrate that the skin exhibits excellent noise reduction performance,with reductions of 10 dB in the streamwise direction,11 dB in the spanwise direction,and 10 dB in the normal *** results also demonstrate that the stability analysis method can serve as a diagnostic tool for flow fields and guide the design of noise reduction structures.

关键词： Flow stability Quasi-period Flexible wall Elastic support element Hydrodynamic noise

在线全文

学校读者我要写书评

暂无评论

水烧蚀激光推进性能初步分析

推进技术 2010年第2期31卷 240-242,256页

作者：崔村燕洪延姬文明何国强西北工业大学航天学院陕西西安710072 装备指挥技术学院北京101416

利用所建流场信息与推力信号同步采集的实验系统,开展了水烧蚀激光推进性能实验研究。研究发现,实验中随机出现两种特征差别明显的现象,即水烧蚀和水诱导的空气击穿。对两种现象获得的气蚀空穴发展、推力特征、冲量耦合系数、比冲和能... 详细信息

利用所建流场信息与推力信号同步采集的实验系统,开展了水烧蚀激光推进性能实验研究。研究发现,实验中随机出现两种特征差别明显的现象,即水烧蚀和水诱导的空气击穿。对两种现象获得的气蚀空穴发展、推力特征、冲量耦合系数、比冲和能量利用率进行了分析。结果表明,与水诱导空气击穿相比,水烧蚀获得的气蚀空穴发展较快、推力幅值、冲量耦合系数和能量利用率都高约10倍,比冲比较接近。研究结果对于水烧蚀激光推进的发展有重要意义。

关键词：激光推进烧蚀击穿推进性能

A review of linear friction welding of Ni -based superalloys

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1382-1391页

作者： Xiawei Yang Tingxi Meng qiang Chu Yu Su Zhenguo guo Rui Xu Wenlong Fan Tiejun Ma Wenya Li State Key Laboratory of Solidification Processing Shaanxi Key Laboratory of Friction Welding TechnologiesNorthwestern Polytechnical UniversityXi’an 710072China Xi’an Aerospace Engine Co.Ltd. Xi’an 710100China

Ni-based superalloys are one of the most important materials employed in high-temperature applications within the aerospace and nuclear energy industries and in gas turbines due to their excellent corrosion,radiation,fatigue resistance,and high-temperature *** friction welding(LFW)is a new joining technology with near-net-forming characteristics that can be used for the manu-facture and repair of a wide range of aerospace *** paper reviews published works on LFW of Ni-based superalloys with the aim of understanding the characteristics of frictional heat generation and extrusion deformation,microstructures,mechanical proper-ties,flash morphology,residual stresses,creep,and fatigue of Ni-based superalloy weldments produced with LFW to enable future optim-um utilization of the LFW process.

关键词： Ni-based superalloys linear friction welding microstructures mechanical properties flash morphology

Electromagnetic Performance Analysis of Variable Flux Memory Machines with Series-magnetic-circuit and Different Rotor Topologies

在线全文

学校读者我要写书评

暂无评论

CES Transactions on Electrical Machines and Systems 2024年第1期8卷 3-11页

作者： qiang Wei Z.Q.Zhu Yan Jia Jianghua Feng Shuying guo Yifeng Li Shouzhi Feng Department of Electronic and Electrical Engineering The University of SheffieldSheffield S13JDU.K. IEEE the CRRC Zhuzhou Institute Company Ltd. Zhuzhou 412001China

In this paper,the electromagnetic performance of variable flux memory(VFM)machines with series-magnetic-circuit is investigated and compared for different rotor *** on a V-type VFM machine,five topologies with different interior permanent magnet(IPM)arrangements are evolved and optimized under same *** on two-dimensional(2-D)finite element(FE)method,their electromagnetic performance at magnetization and demagnetization states is *** reveals that the iron bridge and rotor lamination region between constant PM(CPM)and variable PM(VPM)play an important role in torque density and flux regulation(FR)***,the global efficiency can be improved in VFM machines by adjusting magnetization state(MS)under different operating conditions.

关键词： Memory machine Permanent magnet Rotor topologies Series magnetic circuit Variable flux

Hybrid improper ferroelectricity and phase transition behavior of Li_(2)Nd_(2)Ti_(3)O_(10)ceramics with A-site ordered triple-layer Ruddlesden-Popper structure

在线全文

学校读者我要写书评

暂无评论

Journal of Materiomics 2024年第1期10卷 145-153页

作者： Bi Hui Zhang Diming Xu Rui Ze guo Lu Liu Xiao qiang Liu Xiang Ming Chen Laboratory of Dielectric Materials School of Materials Science and EngineeringZhejiang UniversityHangzhou310058China Key Laboratory of Multifunctional Materials and Structures Ministry of EducationSchool of Electronic Science and EngineeringXi'an Jiaotong UniversityXi'an710049China

Hybrid improper ferroelectricity has been extensively reported through theoretical prediction and experimental investigation in the oxides with Ruddlesden-Popper(R-P)***,the experimentally reported ferroelectric materials based on triple-layer R-P structures are rare,and the weak ferroelectricity impedes its practical *** the present work,the single-phase Li_(2)Nd_(2)Ti_(3)O_(10)ceramics with A-site cation ordered triple-layer R-P structure was obtained by spark plasma sintering technique,and the crystal structure of P2_(1)ab symmetry was revealed by neutron powder diffraction and transmission electron microscope ***,the switchable ferroelectricity in Li_(2)Nd_(2)Ti_(3)O_(10)ceramics has been observed at room temperature,and the saturated polarization-electric field hysteresis loop was obtained with P_(r)=0.4μC/cm^(2)under the electric field of 250 kV/*** phase transition behavior of Li_(2)Nd_(2)Ti_(3)O_(10)oxides was revealed by the temperature-dependence Raman and dielectric spectra combined with the piezoelectric property.

关键词： Hybrid improper ferroelectricity A-site ordered Ruddlesden-Popper structure Phase transition behavior

A Composite Elastomer with Photo-responsive Shape Memory and Programmable Hygroscopic Actuation Functionalities

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第10期42卷 1470-1478,I0009页

作者： Xiang-Xi Cui Li Shang Zhong-Wen Liu Zhao-Tie Liu Jin-qiang Jiang guo Li Key Laboratory of Syngas Conversion of Shaanxi Province School of Chemistry and Chemical EngineeringShaanxi Normal UniversityXi’an710062China

Developing hydroscopic actuators with simultaneous high elasticity,shape programmability and tunable actuating behaviors are highly desired but still *** this study,we propose an orthogonal composite design to develop such a *** developed composite elastomer comprises carboxyl group-grafted polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene(SEBS-g-COOH)as the elastic substrate,and a synthesized azobenzene derivative as the functional filler(Azo12).By surface treatment using acidic and base solutions,the carboxyl groups on the surface can reversibly transform into carboxylate groups,which render the composite tunable hygroscopic actuating *** another aspect,the added filler undergoes trans-to-cis isomerization when exposed to UV light irradiation,leading to liquefaction of the crystalline aggregates formed by Azo12 *** liquefied Azo12 molecules can autonomously resotre their trans form and reform the crystalline *** reversible change in crystralline structure is utilized to realize the shape memory property,and 5 wt%of Azo12addition is adequate for the composite to exhibit photo-responsive shape memory behavior without compromising much of the *** regualtion of external geometry by shape memory effect is effective in altering the actuating *** proposed method can be extend to designing different composites with the demonstrated functionalities.

关键词： Actuator Shape memory Photo-responsive Hygroscopic responsive Azobenzene

Decomposition of pre-existing Au–P clusters induced in situ a-Fe grains uniformization in Fe–P-based nanocrystalline alloys

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 5242-5255页

作者： Min-Hao Han Cheng Sun guo-guo Xi Yang Meng qiang Luo Xue-Qian Yu Wen-Feng Zhang Hao Liu Hong-Jie Xu Tao Zhang Key Laboratory of Aerospace Materials and Performance(Ministry of Education) School of Materials Science and EngineeringBeihang University Laboratory of Functional Fiber Materials Institute of Bast Fiber CropsChinese Academy of Agricultural Science School of Materials Science and Engineering Jiangsu Key Laboratory for Advanced Metallic MaterialsSoutheast University Institute for Advanced Materials North China Electric Power University Center for Advanced Analysis and Computational Science Zhengzhou University

In Fe-based amorphous-/nanocrystalline ribbons,the uniformization and refinement of a-Fe grains are key aspects for optimizing their soft magnetic and mechanical ***,the Fe–P–C–B nanocrystalline alloy system was selected for *** produced as-spun ribbons with pre-existing nanocrystals through melt-quenching and then obtained a well-distributed a-Fe nanocrystalline structure through annealing below the first crystallization onset temperature （633 K）resulting in excellent magnetic properties (saturation magnetization of 1.65 T and coercivity of 1.6 A·m-1)ultra-wide annealing temperature window （from 613 to 733 K）,and extremely high annealing stability （up to 480 min at 633 K）.Furthermore,we propose a new in situ two-step mechanism for the uniformization of a-Fe nanocrystals,which is separately induced by the decomposition of the Au–P clusters and the pre-existing a-Fe nanocrystals during *** work underscores the crucial significance of micro-alloying via metastable clusters primarily influenced by metal-phosphide interactions in the process of refining a-Fe ***,i introduces a new principle for optimizing the comprehensive properties of Fe-based amorphous/nanocrystalline alloys.

关键词： Fe-based nanocrystalline alloys In-situ nano-crystallization Micro-alloying Soft magnetic property