检索结果-南通市图书馆

Study on sex differences and potential clinical value of threedimensional computerized tomography pelvimetry in rectal cancer patients

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Gastrointestinal Oncology 2024年第3期16卷 773-786页

作者： Xiao-Cong Zhou Fei-Yue ke Gaurav Dhamija hao Chen Qiang Wang Department of Colorectal Surgery The Dingli Clinical Institute of Wenzhou Medical University(Wenzhou Central Hospital)Wenzhou 325000Zhejiang ProvinceChina Postgraduate Training Base Alliance of Wenzhou Medical University Wenzhou Central HospitalWenzhou 325000Zhejiang ProvinceChina School of International Studies Wenzhou Medical UniversityWenzhou 325000Zhejiang ProvinceChina Department of Radiology The Dingli Clinical Institute of Wenzhou Medical University(Wenzhou Central Hospital)Wenzhou 325000Zhejiang ProvinceChina

BACKGROUND Laparoscopic rectal cancer radical surgery is a complex procedure affected by various factors.However,the existing literature lacks standardized parameters for the pelvic region and soft tissues,which hampers the establishment of consistent conclusions.AIM To comprehensively assess 16 pelvic and 7 soft tissue parameters through computerized tomography(CT)-based three-dimensional(3D)reconstruction,providing a strong theoretical basis to address challenges in laparoscopic rectal cancer radical surgery.METHODS We analyzed data from 218 patients who underwent radical laparoscopic surgery for rectal cancer,and utilized CT data for 3D pelvic reconstruction.Specific anatomical points were carefully marked and measured using advanced 3D modeling software.To analyze the pelvic and soft tissue parameters,we emp-loyed statistical methods including paired sample t-tests,Wilcoxon rank-sum tests,and correlation analysis.RESULTS The investigation highlighted significant sex disparities in 14 pelvic bone parameters and 3 soft tissue parameters.Males demonstrated larger measurements in pelvic depth and overall curvature,smaller measurements in pelvic width,a larger mesorectal fat area,and a larger anterior-posterior abdominal diameter.By contrast,females exhibited wider pelvises,shallower depth,smaller overall curvature,and an increased amount of subcutaneous fat tissue.However,there were no significant sex differences observed in certain parameters such as sacral curvature height,superior pubococcygeal diameter,rectal area,visceral fat area,waist circumference,and transverse abdominal diameter.CONCLUSION The reconstruction of 3D CT data enabled accurate pelvic measurements,revealing significant sex differences in both pelvic and soft tissue parameters.This study design offer potential in predicting surgical difficulties and creating personalized surgical plans for male rectal cancer patients with a potentially“difficult pelvis”,ultimately improving surgical outcomes.Further research and utilization of these parameters

关键词： Computerized tomography Rectal cancer Three-dimensional reconstruction Pelvimetry Sex differences

Axial enantiomers with donor-regulated TADF feature for multicolor circularly polarized electroluminescence

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第6期67卷 2039-2045页

作者： Chen-hao Guo Wen-Long Zhao ke-ke Tan Wei-Chen Guo Liheng Feng Chuan-Feng Chen Meng Li School of Chemistry and Chemical Engineering Shanxi UniversityTaiyuan030006China Beijing National Laboratory for Molecular Sciences CAS Key Laboratory of Molecular Recognition and FunctionInstitute of ChemistryChinese Academy of SciencesBeijing100190China University of Chinese Academy of Sciences Beijing100049China

This study optimized the TADF feature of axial chiral enantiomers through precise donor engineering,and multicolor CP-TADFwas achieved in the axial chiral framework.Three pairs of axial enantiomers with donor-regulated TADF feature,namely(R/S)-TPCBD,(R/S)-DPCBD,and(R/S)-DPACBD,were synthesized by introducing carbazole donors with different substituents onto biphenyl cyanide acceptors.As the electron-donating ability of donors increases,the emission of these axial enantiomers ranges from 455,476 to 552 nm,their singlet-triplet energy gaps(ΔE_(ST))gradually decrease from 0.30,0.22 to 0.02 e V,accompanied by an increasement in the transition rate(k_(RISC))of RISC process,and the k_(RISC)of DPACBD could reach up to 7.16×10^(5)s^(-1).These axial enantiomers also exhibit mirror-image CD and circularly polarized luminescence(CPL)properties.Moreover,OLEDs based on TPCBD,DPCBD,and DPACBD as emitter were then fabricated,which displayed blue,green,and orange electroluminescence with EQE_(max)of 13.0%,16.4%,and 25.0%,respectively.The results also exhibited a phenomenon of device efficiency increasing with the enhancement of donor abilities.Notably,the CP-OLEDs using(R/S)-TPCBD,(R/S)-DPCBD and(R/S)-DPACBD as emitters displayed intense CPEL signals with g_(EL)values of 3.4×10^(-3)/-4.1×10^(-3),3.2×10^(-3)/-3.1×10^(-3)and2.3×10^(-3)/-2.1×10^(-3),respectively.By convenient molecular engineering of donor regulation in the same molecular skeleton,CP-TADF materials with multicolor CPEL and improved device performance could be conveniently achieved.

关键词： axial chirality thermally activated delayed fluorescence circularly polarized luminescence electroluminescence organic light-emitting diodes

Impact of Annealing on the Melt Recrystallization of a-PDLA/α-PLLA Double-layered Films

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第2期42卷 230-238,I0009页

作者： Yun-Peng Li hao-Ran Shen Shao-Juan Wang hao Zhang Jian Hu Rui Xin Xiao-Li Sun Shou-ke Yan key Laboratory of Rubber-Plastics Ministry of Education/Shandong Provincial Key Laboratory of Rubber-plasticsQingdao University of Science&TechnologyQingdao266042China State key Laboratory of Chemical Resource Engineering Beijing University of Chemical TechnologyBeijing100029China

Poly(lactic acid)(PLA) as a bio-based polymer with biodegradability and biocompatibility has attracted much attention. To manipulate its properties for different applications, regulation of crystal structure and crystalline morphology becomes an attractive research topic. In this work, the structure evolution of layered samples containing an amorphous poly(D-lactide)(PDLA) layer and a crystalline poly(L-lactide)(PLLA)layer with highly oriented edge-on α lamellar crystals after annealing at 150 ℃ or/and after melt-recrystallization has been studied by AFM, FTIR,and TEM combined with electron diffraction. The results demonstrate that melt recrystallization of the as-prepared sample leads to the formation of abundant randomly oriented PLA stereo-complex(PLA SC) crystals. Annealing at 150 ℃ results in the formation of a small amount of oriented PLA SC crystals at the interface. These PLA SC crystals show great impact on the recrystallization behavior of sample after melting at 190 ℃ and then crystallizing at 90 ℃. First, they impede the mutual diffusion of the overlying PDLA and underlying PLLA, and thus reduce their stereocomplexation ability as manifested by the decreased amount of PLA SC crystals. Second, they act as substrate to initiate the epitaxial crystallization of the overlying PDLA and underlying PLLA, which ensures the production of a highly oriented structure of PDLA and PLLA after melt recrystallization again.

关键词： Poly(L-lactide) Poly(D-lactide) Double layer Stereocomplex

Effect of Heat Treatment on Gradient Microstructure and Tensile Property of Laser Powder Bed Fusion Fabricated 15-5 Precipitation Hardening Stainless Steel

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 181-195页

作者： Sheng Cao Hongyu Liu Jin Jiang ke He Binghua Lv hao Zhang Lujie Zhang Jingrong Meng hao Deng Xiaodong Niu Department of Mechanical Engineering College of EngineeringShantou UniversityShantou515063China China State Shipbuilding Co. Ltd.Huangpu Wenchong Shipbuilding Company Ltd.Guangzhou510715China Faculty of Materials and Manufacturing Beijing University of TechnologyBeijing100080China Shantou Ruixiang Mould Co. Ltd.Shantou515041China Military Representative Office X of Unit 93147 Deyang618000China China National Erzhong Group Co. Deyang Wanhang Die Forging Co.Ltd.Deyang618013China

This work investigated the gradient microstructure evolution and tensile property of LPBF fabricated 15-5 precipitation hardening stainless steel in post-process direct ageing(DA)and solution treating&ageing(STA).The varied microstructures for austenite and small-sized oxide inclusions at different sample heights in the as-built(AB)condition was generally preserved after DA treatment.However,austenite was almost disappeared,and oxide particle grew significantly after the STA treatment.As a result,the tensile property differences in sample top and bottom for AB and DA conditions did not occur in the STA samples.For the influence of post-process heat treatment,the STA condition had the highest yield strength due to the highest volume fraction of nano-sized Cu precipitates.However,the DA specimen had the highest ultimate tensile strength and elongation owing to the considerable amount of austenite phase and associated transformation induced plasticity effect.

关键词： 15-5 PH stainless steel Laser powder bed fusion Heat treatment Gradient microstructures Tensile properties

Adaptive Trajectory Tracking Control for Nonholonomic Wheeled Mobile Robots:A Barrier Function Sliding Mode Approach

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 1007-1021页

作者： Yunjun Zheng Jinchuan Zheng ke Shao Han Zhao hao Xie Hai Wang the School of Mechanical Engineering Hefei University of TechnologyHefei 230009China the School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyHawthorn VIC 3122Australia the School of Civil Aviation Northwestern Polytechnical UniversityXi’an 710072China the Shanghai Aerospace Control Technology Institute Shanghai 201109 the School of Automation Science and Electrical Engineering Beihang UniversityBeijing 100191China the College of Science HealthEngineering and EducationMurdoch UniversityPerth WA6150Australia

The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.

关键词： Adaptive sliding mode barrier function nonholonomic wheeled mobile robot(NWMR) trajectory tracking control

Lymphatic plastic bronchitis and primary chylothorax: A study based on computed tomography lymphangiography

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第14期12卷 2350-2358页

作者： Xing-Peng Li Yan Zhang Xiao-Li Sun Kun hao Meng-ke Liu Qi hao Ren-Gui Wang Department of Radiology Beijing Shijitan Hospital Affiliated to Capital Medical UniversityBeijing 100038China Department of Radiology Qilu HospitalShandong UniversityJinan 250063Shandong ProvinceChina Department of Lymph Surgery Beijing Shijitan Hospital Affiliated to Capital Medical UniversityBeijing 100038China Department of Radiology People's Hospital of Peking UniversityThe Second School of Clinical Medicine of Peking UniversityBeijing 100034China

BACKGROUND This study presents an evaluation of the computed tomography lymphangio-graphy(CTL)features of lymphatic plastic bronchitis(PB)and primary chylotho-rax to improve the diagnostic accuracy for these two diseases.AIM To improve the diagnosis of lymphatic PB or primary chylothorax,a retrospective analysis of the clinical features and CTL characteristics of 71 patients diagnosed with lymphatic PB or primary chylothorax was performed.METHODS The clinical and CTL data of 71 patients(20 with lymphatic PB,41 with primary chylothorax,and 10 with lymphatic PB with primary chylothorax)were collected retrospectively.CTL was performed in all patients.The clinical manifestations,CTL findings,and conventional chest CT findings of the three groups of patients were compared.The chi-square test or Fisher's exact test was used to compare the differences among the three groups.A difference was considered to be statistically significant when Pkening in 12(60.0%),11(26.8%)and 3(30.0%)patients;bronchovascular bundle thickening in 14(70.0%),6(14.6%)and 4(40.0%)patients;localized mediastinal changes in 14(70.0%),14(34.1%),and 7(70.0%)patients;diffuse mediastinal changes in 6(30.0%),5(12.2%),and 3(30.0%)patients;cystic lesions in the axilla in 2(10.0%),6(14.6%),and 2(20.0%)patients;and cystic lesions in the chest wall in 0(0%),2(4.9%),and 2(4.9%)patients.CONCLUSION CTL is well suited to clarify the characteristics of l

关键词： Lymphatic Plastic bronchitis Primary chylothorax Direct lymphangiography Computed tomography lymphangiography

Kinetic and mechanism of the reaction between Cl and several mono-methyl branched alkanes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第1期135卷 474-482页

作者： Yan Chen Weigang Wang Junling Li Li Zhou Bo Shi Cici Fan ke Wang hao Zhang Hong Li Maofa Ge State key Laboratory for Structural Chemistry of Unstable and Stable Species Beijing National Laboratory for Molecular Sciences(BNLMS)CAS Research/Education Center for Excellence in Molecular SciencesInstitute of ChemistryChinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100049China State key Laboratory of Environmental Criteria and Risk Assessment Chinese Research Academy of Environmental SciencesBeijing 100012China National Engineering Research Center for Flue Gas Desulfurization Department of Environmental Science and EngineeringSichuan UniversityChengdu 610065China College of Chemistry and Materials Science Hebei Normal UniversityShijiazhuang 050024China

Branched alkanes are ubiquitous in the troposphere and play an important role in the chemical processes.In this work,the rate constants and products for the reaction of Cl atoms with 3-methylhexane and 2-methylheptane were measured at room temperature(298±0.2K)and atmospheric pressure using a conventional relative rate method.The rate constants of 3-methylhexane and 2-methylheptane in units of cm~3/(mol·sec)are(3.09±0.31)×10^(-10)and(3.67±0.40)×10^(-10),respectively.Furthermore,the corresponding atmospheric lifetime of the studied branched alkanes with Cl was 6.92-89.90 hours and 5.82-75.69 hours,respectively.The estimated atmospheric lifetimes indicated that the reaction with Cl atoms could be the most important atmospheric degradation pathway for 3-methylhexane and2-methylheptane.Primary gas-phase products of the reactions were identified and quantified,and particle-phase products were also obtained.The atmosphere oxidation mechanism of Cl atoms with 3-methylhexane and 2-methylheptane is proposed.The SOA yields of 3-methylhexane and 2-methylheptane from the reaction of Cl atoms were determined to be7.96%±0.89%and 13.35%±1.50%respectively.Overall,the results reveal that the primary loss process of branched alkanes is the reaction with Cl atoms,which impacts its degradation on a regional scale.

关键词： 3-Methylhexane 2-Methylheptane Chlorine atoms Kinetics Mechanism

Polydatin ameliorates hepatic ischemia-reperfusion injury by modulating macrophage polarization

在线全文

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第1期23卷 25-34页

作者： Hai-Li Bao Chuan-Zhi Chen Chang-Zhen Ren ke-Yan Sun hao Liu Shao-Hua Song Zhi-Ren Fu Department of Organ Transplantation Shanghai Changzheng HospitalNavy Military Medical UniversityShanghai 200003China Department of Surgical Oncology the First Affiliated HospitalZhejiang University School of MedicineHangzhou 310003China Department of Cardiology Shanghai Changzheng HospitalNaval Military Medical UniversityShanghai 200003China Department of General Surgery Ruijin HospitalShanghai Jiao Tong University School of MedicineShanghai 200025China

Background:Polydatin,a glucoside of resveratrol,has shown protective effects against various diseases.However,little is known about its effect on hepatic ischemia-reperfusion(I/R)injury.This study aimed to elucidate whether polydatin protects liver against I/R-induced injury and to explore the underlying mechanism.Methods:After gavage feeding polydatin once daily for a week,mice underwent a partial hepatic I/R procedure.Serum alanine aminotransferase(ALT)/aspartate aminotransferase(AST),hematoxylin-eosin(H&E)and TdT-mediated dUTP nick-end labeling(TUNEL)staining were used to evaluate liver injury.The severity related to the inflammatory response and reactive oxygen species(ROS)production was also investigated.Furthermore,immunofluorescence and Western blotting were used to detect macrophage polarization and the NF-κB signaling pathway in macrophages.Results:Compared with the I/R group,polydatin pretreatment significantly attenuated I/R-induced liver damage and apoptosis.The oxidative stress marker(dihydroethidium fluorescence,malondialdehyde,superoxide dismutase and glutathione peroxidase)and I/R related inflammatory cytokines(interleukin1β,interleukin-10 and tumor necrosis factor-α)were significantly suppressed after polydatin treatment.In addition,the result of immunofluorescence indicated that polydatin reduced the polarization of macrophages toward M1 macrophages both in vivo and in vitro.Western blotting showed that polydatin inhibited the pro-inflammatory function of RAW264.7 via down-regulating the NF-κB signaling pathway.Conclusions:Polydatin protects the liver from I/R injury by remodeling macrophage polarization via NFκB signaling.

关键词： Hepatic ischemia-reperfusion injury Polydatin Macrophage Polarization Inflammation

Microstructural evolution and deformation behavior of friction stir welded twin-induced plasticity steel

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 68-81页

作者： ke Qiao Kuaishe Wang Jia Wang Zhengyang hao Yating Xiang Peng Han Jun Cai Qi Yang Wen Wang School of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials ProcessingXi’an University of Architecture and TechnologyXi’an 710055China Shanghai Research Institute of Materials Shanghai 200437China

The weldability of twin-induced plasticity(TWIP)steel with ultra-high strength via friction stir welding(FSW)technique was investigated,and microstructural evolution and deformation behavior of whole and micro-zones of FSW TWIP joint were studied for the first time.The results showed that the content of recrystallized grains in the stir zone(SZ)increased from 10.5%of basal material(BM)to 14.2%,and that of heat affected zone(HAZ)increased to 78.6%.The percentage of annealing twins decreased from 26.8%in BM to 11%in SZ,while increased to 35%in HAZ.Compared with the BM,the ultimate tensile strength and yield strength of the FSW joint increased to 1036 and 550 MPa,respectively,reaching 106.7%and 110.9%of BM,respectively.The elongation of the entire joint was 50.5%,which was lower than that of BM due to the nonuniform deformation during the tensile test.The engineering strain was mainly concentrated in BM and SZ and transferred to each other during the tensile test,while the engineering strain in HAZ was always the lowest.Finally,the tensile fracture occurred in the SZ.The order of ultimate tensile strength of micro-zones in the FSW joint was as follows:HAZ>BM≈SZ.The order of yield strength was as follows:HAZ>BM>SZ.

关键词： Twin-induced plasticity steel Friction stir welding Microstructure Mechanical property Deformation behavior