检索结果-南通市图书馆

Microstructure and water-swelling mechanism of red-bed mudstone in the Xining region,Northeastern Tibetan Plateau

Journal of Rock Mechanics and Geotechnical Engineering 2024年第7期16卷 2537-2551页

作者： Huan Guan Yong Ren Sixiang Ling Xiyong Wu Tao Yu Xian Li sen Wang Chunwei Sun School of Civil Engineering Southwest Jiaotong UniversityChengdu610031China Faculty of Geosciences and Engineering Southwest Jiaotong UniversityChengdu611756China Moe Key Laboratory of High-speed Railway Engineering Southwest Jiaotong UniversityChengdu610031China Guangzhou Metro Design and Research Institute Co Ltd. Guangzhou510010China Chengdu City Construction Investment Group Co Ltd. Chengdu610036China

This paper examines the effect of the microstructure and electrical conductivity(EC)on the swelling ratio and pressure in red-bed mudstone sampled from arid areas in the Xining region in the northeastern Tibetan Plateau.A series of laboratory tests,including swelling experiments,X-ray diffraction(XRD),and scanning electron microscope(SEM),was carried out for mechanical and microstructural *** coupled influence of the EC and microstructural parameters on the expansion ratio and pressure was investigated,and the weight coefficients were discussed by the entropy weight *** results revealed an increasing exponential trend in EC,and the maximum swelling speed occurred at an EC of approximately 10 mS/*** addition,a method for predicting the expansion potential is proposed based on the microstructure,and its reliability is verified by comparing with swelling experimental *** addition,according to the image analysis results,the ranges of the change in the clay minerals content(CMC),the fractal dimension(FD),the average diameter(AD)of pores,and the plane porosity(PP)are 23.75%e53%,1.08e1.17,7.53e22.45 mm,and 0.62%e1.25%,***,mudstone swelling is negatively correlated with the plane porosity,fractal dimension and average diameter and is linearly correlated with the clay mineral ***,the weight values prove that the microstructural characteristics,including FD,AD,and PP,are the main factors influencing the expansion properties of red-bed mudstones in the Xining *** on the combination of macro and micro-analyses,a quantitative analysis of the swelling process of mudstones can provide a better reference for understanding the mechanism of expansion behavior.

关键词： Mudstones Microstructure Swelling characteristics Electrical conductivity(EC) Scanning electron microscope Water-swelling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rethinking attribute localization for zero-shot learning

引用

Science China(Information Sciences) 2024年第7期67卷 184-196页

作者： Shuhuang CHEN Shiming CHEN Guo-sen XIE Xiangbo SHU Xinge YOU Xuelong LI School of Electronic Information and Communication Huazhong University of Science and Technology School of Computer Science and Engineering Nanjing University of Science and Technology School of Artificial Intelligence Optics and Electronics Northwestern Polytechnical University

Recent advancements in attribute localization have showcased its potential in discovering the intrinsic semantic knowledge for visual feature representations, thereby facilitating significant visual-semantic interactions essential for zero-shot learning(ZSL). However, the majority of existing attribute localization methods heavily rely on classification constraints, resulting in accurate localization of only a few attributes while neglecting the rest important attributes associated with other classes. This limitation hinders the discovery of the intrinsic semantic relationships between attributes and visual features across all *** address this problem, we propose a novel attribute localization refinement(ALR) module designed to enhance the model's ability to accurately localize all attributes. Essentially, we enhance weak discriminant attributes by grouping them and introduce weighted attribute regression to standardize the mapping values of semantic attributes. This module can be flexibly combined with existing attribute localization *** experiments show that when combined with the ALR module, the localization errors in existing methods are corrected, and state-of-the-art classification performance is achieved.

关键词： zero-shot learning attention mechanism attribute localization image classification

来源：

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rational design of metal selenides nanomaterials for alkali metal ion(Li^(+)/Na^(+)/K^(+))batteries:current status and perspectives

引用

Rare Metals 2024年第5期43卷 1906-1931页

作者： Rui Sun Feng Xu Cai-Hong Wang Sheng-Jun Lu Yu-Fei Zhang Hao-sen Fan College of Materials Science and Metallurgy Engineering Guizhou UniversityGuiyang550025China School of Chemistry and Chemical Engineering Guangzhou UniversityGuangzhou510006China

Recently,metal selenides have obtained widespread attention as electrode materials for alkali(Li^(+)/Na^(+)/K^(+))batteries due to their promising theoretical capacity and ***,metal selenides,similar to metal oxides and sulfides,also suffer from severe volume explosion during repeated charge/discharge processes,which results in the structure collapse and the following pulverization of electrode ***,it leads to poor cycle stability and influencing their further *** order to solve these issues,some special strategies,including elemental doping,coupling with carbon materials,synthesis of the bimetal selenides with heterostructure,etc.,have been gradually applied to design novel electrode materials with outstanding electrochemical ***,the recent research progress on metal selenides as anodes for alkali ion batteries is summarized,including the regulation of crystal structure,synthesis strategies,modification methods,and electrochemical mechanisms and ***,the challenges of metal selenides and the perspective for future electrode material design are *** is hoped to pave a way for the development of metal selenide electrode materials for the potential applications for alkali metal ion(Li^(+)/Na^(+)/K^(+))batteries.

关键词： Rational design Metal selenides Nanostructure Li^(+) batteries Na^(+) batteries K^(+) batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Adhesion strength of tetrahydrofuran hydrates is dictated by substrate stiffness

引用

Petroleum Science 2024年第1期21卷 667-673页

作者： Yan-Wen Lin Tong Li Yi Zhang Wei-Wei Yan Xiao-Ming Chen Zhi-sen Zhang Jian-Yang Wu Department of Physics Research Institute for Biomimetics and Soft MatterJiujiang Research Institute and Fujian Provincial Key Laboratory for Soft Functional Materials ResearchXiamen UniversityXiamen361005FujianChina Key Laboratory of Marine Materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingbo315201ZhejiangChina Key Laboratory of Icing and Anti/De-icing China Aerodynamics Research and Development CenterMianyang621000SichuanChina Micro-and Nano-technology Research Center State Key Laboratory for Manufacturing Systems EngineeringXi’an Jiaotong UniversityXi’an710049ShaanxiChina Electronic Materials Research Lab Key Laboratory of the Ministry of EducationXi’an Jiaotong UniversityXi’an710049ShaanxiChina NTNU Nanomechanical Lab Norwegian University of Science and Technology(NTNU)Trondheim7491Norway

Understanding the hydrate adhesion is important to tackling hydrate accretion in ***,the relationship between the Tetrahydrofuran(THF)hydrate adhesion strength(AS)and surface stiffness on elastic coatings is systemically examined by experimental shear force measurements and theoretical *** mechanical factor-elastic modulus of the coatings greatly dictates the hydrate AS,which is explained by the adhesion mechanics theory,beyond the usual factors such as wettability and structural ***,the hydrate AS increases with reducing the thickness of the elastic coatings,resulted from the decrease of the apparent surface elastic *** effect of critical thickness for the elastic materials with variable elastic modulus on the hydrate AS is also *** study provides deep perspectives on the regulation of the hydrate AS by the elastic modulus of elastic materials,which is of significance to design anti-hydrate surfaces for mitigation of hydrate accretion in petro-pipelines.

关键词： Hydrate Adhesion strength Elastic modulus Coatings

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical responses of anchoring structure under triaxial cyclic loading

引用

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 545-560页

作者： Peng Wang Nong Zhang Qun Wei Xingliang Xu Guangzhen Cui Aoran Li sen Yang Jiaguang Kan State Key Laboratory of Coal Resources and Safe Mining School of MinesChina University of Mining and TechnologyXuzhou221116China School of Civil Engineering Xuzhou University of TechnologyXuzhou221116China School of Mechanical Engineering Jiangsu University of TechnologyChangzhou213001China

Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and *** study develops an experimental device designed to test AS under triaxial *** device enables the investigation of the mechanical response,failure mode,instability assessment criteria,and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress *** results show that the peak bearing strength is positively correlated with the anchoring matrix strength,anchorage length,and edgewise compressive *** bearing capacity decreases significantly when the anchorage direction is severely *** free face failure modes are typically transverse cracking,concave fracturing,V-shaped slipping and detachment,and spallation ***,when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength,loading rate,and anchorage inclination angle increase,the failure intensity *** is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward *** cyclic loads,the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway ***,a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification.

关键词： Triaxial stress Dynamic-static combination load Cyclic loading Anchoring structure(AS) Cumulative damage

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

{1012}twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

引用

Journal of Magnesium and Alloys 2024年第4期12卷 1529-1539页

作者： Bin-Jiang Lv sen Wang Fu-Hao Gao Ning Cui Yi-Nan Li Tie-Wei Xu Feng Guo School of Mechanical and Automotive Engineering Qingdao University of Technology266520China Key Lab of industrial Fluid Energy Conservation and Pollution Control Qingdao University of Technology266520China

This study investigated the formation mechanism of new grains due to twin–twin intersections in a coarse-grained Mg–6Al–3Sn–2Zn alloy during different strain rates of an isothermal *** results of electron backscattered diffraction investigations showed that the activated twins were primarily{1012}tension twins,and 60°boundaries formed due to twin–twin intersections under different strain *** twin variants with 60°boundaries transformed into new grains through lattice rotations at a low strain rate(0.01 s^(−1)).At a high strain rate(10 s^(−1)),the regions surrounded by subgrain boundaries through high-density dislocation arrangement and the 60°boundaries transformed into new grains via dynamic recrystallization.

关键词： Mg alloy Twin-twin intersection Lattice rotation Dynamic recrystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ginsenoside Rg3 Promotes the Survival and Migration of Trophoblast Cells in a Rat Model of Gestational Hypertension by Regulating miR-100a/Insulin Growth Factor-2 Axis

引用

World Journal of Traditional Chinese Medicine 2024年第1期10卷 65-74页

作者： Xiu-Mei Fan Li Yang Gang Zhao sen-Ye Huo Yan Gao Department of Obstetrics Xingtai Third HospitalXingtaiChina Department of Obstetrics Xingtai Maternal and Child Health Care HospitalXingtaiChina

Objective:Preeclampsia(PE)is a common complication during ***-100a is expressed in the placenta and regulates the survival and development of placental *** growth factor-2(IGF-2)may serve as its downstream *** study investigated the protective mechanisms of ginsenoside Rg3 against PE in rat *** and Methods:LPS-induced rat PE models were suitable for intravenous administration of the highly expressed miR-100a ginsenoside Rg3 lentiviral *** trophoblasts were cultured in vitro for JEG-3,and PE cell models were *** vivo effects on tumor growth and apoptosis were *** Rg3 was treated with different concentrations of shRNA,miR-100a analogs,inhibitors,or *** and the expression of autophagy-related proteins were *** activity and migration were determined using Cell Counting Kit-8 and Transwell *** drugs strongly inhibited trophoblasts under normal conditions with some synergy between ***-luciferase return assay confirmed the binding affinity of miR-100a for ***:In response to Rg3,autophagy and the expression of autophagy-related proteins LC3-I/II,Beclin1,and SQSTM1 were reduced in PE rat placental ***3 inhibited autophagy in JEG-3 cells and promoted JEG-3 survival and migration in a concentration-dependent ***-100a upregulated PE *** results suggested that autophagy was a vital signaling ***3 intervention inhibited miR-100a expression and miR-100a downregulated IGF-2 expression in placental tissues and promoted autophagy,thereby inhibiting JEG-3cell survival and *** rats,Rg3 inhibited PE development by regulating the activity of the miR-100a-IGF-2 signaling ***:Ginsenoside Rg3 positively regulates the miR-100a-IGF-2 axis and protects PE rats by inhibiting trophoblastic autophagy and promoting trophoblastic cell survival and migration.

关键词： Ginsenoside Rg3 inflammatory response miR-100a/insulin growth factor-2 axis preeclampsia pregnancy-induced hypertension

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Simple chemical synthesis and isotropic negative thermal expansion in MHfF_(6)(M=Ca,Mn,Fe,and Co)

引用

Nano Research 2024年第3期17卷 2195-2203页

作者： Yongqiang Qiao sen Zhang Peixian Zhang Juan Guo Andrea Sanson Xi Zhen Kaiyue Zhao Qilong Gao Jun Chen Key Laboratory of Materials Physics of Ministry of Education and School of Physics and MicroelectronicsZhengzhou UniversityZhengzhou 450052China Department of Physics and Astronomy University of PadovaPadova I-35131Italy Beijing Advanced Innovation Center for Materials Genome Engineering Department of Physical ChemistryUniversity of Science and Technology BeijingBeijing 100083China

The rapid progress of modern technologies has accelerated the prominence of thermal expansion mismatch between materials,and tunable thermal expansion materials will be a powerful safeguard against this ***,isotropic MHfF_(6)(M=Ca,Mn,Fe,and Co)compounds with tunable thermal expansion have been produced via a low-cost synthetic method and *** utilizing temperature dependent X-ray diffraction(XRD)and Raman spectroscopy,combined with first principles calculations,it was revealed that the transverse thermal vibrations of the F atoms are dominated by low-frequency phonons with negative Grüneisen parameters and are therefore the origin of the negative thermal expansion(NTE).Very interestingly,with the increase of the M atomic number,the metal…F atomic linkages become stiffer,reducing the number of vibrational modes with negative Grüneisen parameters,so that the strong NTE can be gradually adjusted to moderate NTE and to near zero thermal *** present study achieves the tunable thermal expansion in a new compound family and shed light on the internal mechanism from the perspective of lattice vibrational dynamics.

关键词： negative thermal expansion fluorides chemical synthesis nanosheet structure first principles calculations

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Universal and efficient hybrid modeling and direct slicing method for additive manufacturing processes

引用

Advances in Manufacturing 2024年第2期12卷 300-316页

作者： sen-Lin Wang Li-Chao Zhang Chao Cai Ming-Kai Tang Si Chen Jiang Huang Yu-Sheng Shi State Key Laboratory of Materials Processing and Die and Mould Technology Huazhong University of Science and TechnologyWuhan430074People’s Republic of China School of Machinery and Automation Wuhan University of Science and TechnologyWuhan430081People’s Republic of China

Model design and slicing contour generation in additive manufacturing(AM)data processing face challenges in terms of efficiency and scalability when stereolithography files generated by complex functionally graded structures have millions of *** paper proposes a hybrid modeling and direct slicing method for AM to efficiently construct and handle complex three-dimensional(3D)*** 3D solids,including conformal multigradient structures,were uniformly described using a small amount of data via signed distance *** hybrid representations were quickly discretized into numerous disordered directed lines using an improved marching squares *** establishing a directional HashMap to construct the topological relationship between lines,a connecting algorithm with linear time complexity is proposed to generate slicing contours for *** method replaces the mesh reconstruction and Boolean operation stages and can efficiently construct complex conformal gradient models of arbitrary topologies through hybrid ***,the time and memory consumption of direct slicing are much lower than those of previous methods when handling hybrid models with hundreds of millions of faces after mesh reconstruction.

关键词： Additive manufacturing(AM) Hybrid modeling Direct slicing Signed distance field

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CAOSA-extracted lignin improves enzymatic hydrolysis of cellulose

引用

Green Energy & Environment 2024年第7期9卷 1101-1111页

作者： sen Ma Zheng Li Jonathan Sperry Xing Tang Yong Sun Lu Lin Jian Liu Xianhai Zeng College of Energy State Key Laboratory of Physical Chemistry of Solid Surfaces Xiamen University Fujian Engineering and Research Centre of Clean and High-valued Technologies for Biomass Xiamen Key Laboratory of Clean and High-valued Utilization of Biomass Centre for Green Chemical Science University of Auckland

The conversion of biomass into sugar platform compounds is very important for the biorefinery industry. Pretreatment is essential to the biomass of the sugar platform, however, the lignin obtained by pretreatment, as a key part of lignocellulose, generally has a passive effect on the enzymatic hydrolysis of cellulose into sugars. In this study, p-TsOH(p-toluenesulfonic acid), DES(Deep eutectic solvent) and CAOSA(cooking with active oxygen and solid alkali) pretreatment ways were used to fraction lignin from bamboo biomass. After CAOSA treatment, the hydrolysis efficiency of the pulp was 95.57%. Moreover, the effect of different treatment methods on lignin properties was studied and the promotion effect of lignin was investigated by adding it to the cellulose enzymatic hydrolysis system. In this work, the results showed that CAOSA-extracted lignin with lower ?(1.31–1.25) had a better adsorption effect on the enzyme protein. p-TsOH-extracted lignin with a larger S/G ratio enhanced the inhibition of enzymatic hydrolysis. In addition, the presence of-COOHs in lignin could reduce its inhibitory effect on cellulose saccharification.

关键词： Biomass pretreatment CAOSA Cellulose hydrolysis Lignin Enzyme

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：