检索结果-南通市图书馆

Surgical treatment of proximal humerus fractures using PHILOS plate

Chinese Journal of Traumatology 2014年第5期17卷 279-284页

作者： GN Kiran kumar gaurav sharma Vijay sharma Vaibhav Jain Kamran Farooque Vivek Morey Department of Orthopaedics All India Institute of Medical Sciences New Delhi 110029 India

Objective：To evaluate functional outcome and complications of open reduction and internal fixation with proximal humeral internal locking system （PHILOS） plate for proximal humerus ***：We reviewed 51 patients who underwent open reduction and internal fixation with PHILOS plate between the years 2007 to *** were 35 men and 16 women with a mean age of 38 years （range 24-68）.There were 41 patients in the age group of ＜60 years and 10 patients in the age group of ＞60 *** to Neer classification system,8,15 and 23 patients had 2-part,3-part,and 4-part fractures,respectively and 5 patients had 4-part fracture *** surgeries were carried out at our tertiary care trauma *** evaluation of the shoulder at final follow-up was done using Constant-Murley ***：The mean follow-up period was 30 months （range 12-44 months）.Two patients were lost to *** the remaining 49 patients,all fractures were united clinically and *** mean time for radiological union was 12 weeks （range 8-20 weeks）.At the final follow-up the mean Constant-Murley score was 79 （range 50-100）.The results were excellent in 25 patients,good in 13 patients,fair in 6 patients and poor in 5 *** the follow-up,four cases of varus malunion,one case of subacromial impingement,one case of deep infection,one case of intraarticular screw penetration and one case of failure of fixation were *** cases of avascular necrosis,hardware failure,locking screw loosening or nonunion were ***：PHILOS provides stable fixation in proximal humerus *** prevent potential complications like avascular necrosis,meticulous surgical dissection to preserve vascularity of humeral head is necessary.

关键词： Proximal humerus fracture Fracture fixation, internal Proximal humeral internal locking system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

On-table reconstruction and fixation of Mason type III radial head fractures

引用

Chinese Journal of Traumatology 2015年第5期18卷 288-292页

作者： G.N. Kiran kumar gaurav sharma Kamran Farooque Vijay sharma Vaibhav Jain Ravijot Singh Vivek Morey Department of Orthopaedics All India Institute of Medical Sciences New Delhi 110029~ India

Purpose： To evaluate the functional and radiological outcome of comminuted radial head fractures, which were not amenable for classical open reduction with internal fixation, treated by on-table reconstruction and fixation using low profile plates. Methods： We reviewed 6 patients of Mason type Ill radial head fractures treated by on-table recon- struction technique between 2011 and 2013. There were 5 men and 1 woman with a mean age of 35 years （range 25-46 years）. All surgeries were carried out at our tertiary care level 1 trauma centre within a mean of 3 days （range 1-8 days） from date of injury using on-table reconstruction technique. The functional outcome was measured using elbow functional rating index described by Broberg and Morrey and the patient-based Disabilities of the Arm, Shoulder and Hand （DASH） outcome measure. Results： The mean follow-up period was 25 months, The average elbow flexion was 135~ （range 125~ -140~） and the average flexion contracture was 5~ （range 0-10~）. The average supination and pronation was 75~ （range ？0o-80~） and 70~ （range 65^-82~） respectively. According to Broberg and Morrey scoring system, the average score was 90 points （range 75-100）. The mean DASH score was 2.49 points, Conclusion： On-table reconstruction and fixation of comminuted radial head fractures using low profile plates is a reasonable option. The reconstructed radial head acts as spacer and provides reasonably good results and no surgical intervention is required for asymptomatic nonunion of these fractures regardless of the radiological findings.

关键词： On-table reconstruction technique Radial head fractures Bone plates

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Bayesian multi-model inference methodology for imprecise momentindependent global sensitivity analysis of rock structures

引用

Journal of Rock Mechanics and Geotechnical Engineering 2024年第3期16卷 840-859页

作者： Akshay kumar gaurav Tiwari Department of Civil Engineering Indian Institute of Technology(IIT)KanpurKanpur208016India

Traditional global sensitivity analysis(GSA)neglects the epistemic uncertainties associated with the probabilistic characteristics(*** of distribution type and its parameters)of input rock properties emanating due to the small size of datasets while mapping the relative importance of properties to the model *** paper proposes an augmented Bayesian multi-model inference(BMMI)coupled with GSA methodology(BMMI-GSA)to address this issue by estimating the imprecision in the momentindependent sensitivity indices of rock structures arising from the small size of input *** methodology employs BMMI to quantify the epistemic uncertainties associated with model type and parameters of input *** estimated uncertainties are propagated in estimating imprecision in moment-independent Borgonovo’s indices by employing a reweighting approach on candidate probabilistic *** proposed methodology is showcased for a rock slope prone to stress-controlled failure in the Himalayan region of *** proposed methodology was superior to the conventional GSA(neglects all epistemic uncertainties)and Bayesian coupled GSA(B-GSA)(neglects model uncertainty)due to its capability to incorporate the uncertainties in both model type and parameters of *** Borgonovo’s indices estimated via proposed methodology provide the confidence intervals of the sensitivity indices instead of their fixed-point estimates,which makes the user more informed in the data collection *** performed with the varying sample sizes suggested that the uncertainties in sensitivity indices reduce significantly with the increasing sample *** accurate importance ranking of properties was only possible via samples of large ***,the impact of the prior knowledge in terms of prior ranges and distributions was significant;hence,any related assumption should be made carefully.

关键词： Bayesian inference Multi-model inference Statistical uncertainty Global sensitivity analysis(GSA) Borgonovo’s indices Limited data

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of cooling media on bead geometry,microstructure,and mechanical properties of wire arc additive manufactured IN718 alloy

引用

Advances in Manufacturing 2024年第1期12卷 124-149页

作者： Parveen kumar Satish kumar sharma Ratnesh kumar Raj Singh Department of Mechanical Engineering Thapar Institute of Engineering and TechnologyPatialaPunjab147004India

This work aims to present and explore thermal management techniques for the wire arc additive manufacturing(WAAM)of IN718 *** heat can be mitigated via air or water *** this study,the material was deposited under four different heat-input conditions with air or water *** air cooling,the layer is deposited in a normal atmospheric air environment,whereas with water cooling,the material is deposited inside a water tank by varying the water *** validate the air and water cooling thermal management techniques,IN718 single-pass and multilayer linear walls were deposited using the bidirectional gas metal arc welding based WAAM setup under four different heat input *** the deposition of single layers,the temperature profiles were recorded,and the geometric and microstructural features were *** multilayer wall structures,the mechanical properties(hardness,tensile strength,and elongation)were determined and assessed using the corresponding microstructural features explored through scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and electron backscatter diffraction(EBSD)*** microstructure observed through SEM analysis in the building direction was found to be nonhomogenous compared with that in the deposition ***,water cooling was found to govern bead characteristics,such as wall width and *** grain size and anisotropy of the mechanical properties also decreased in the water-cooled ***,water cooling is an economical and efficient method to mitigate excessive heat accumulation in WAAM-deposited IN718.

关键词： Air cooling Water cooling IN718 Bead characteristics Microstructure Electron backscatter diffraction(EBSD)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Identification of earthquake induced structural damage based on synchroextracting transform

引用

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 475-487页

作者： Roshan kumar gaurav kumar Wei Zhao Arvind R Yadav Gang Yu Jayendra kumar Evans Amponsah Department of Electronic and Information Technology Miami College of Henan UniversityHenan 475004China Alliance University Alliance College of Engineering and DesignBanglore 562106India Department of Electronics and Comm Parul UniversityVadodra 391760India School of Electrical Engineering University of JinanJinan 250022China Department of Electronics and Comm NIT JamshedpurJamshedpur 831014India Department of Civil engineering Kwame Nkrumah University of Science and TechnologyKumasi 10959Ghana

Several popular time-frequency techniques,including the Wigner-Ville distribution,smoothed pseudo-Wigner-Ville distribution,wavelet transform,synchrosqueezing transform,Hilbert-Huang transform,and Gabor-Wigner transform,are investigated to determine how well they can identify damage to *** this work,a synchroextracting transform(SET)based on the short-time Fourier transform is proposed for estimating post-earthquake structural *** performance of SET for artificially generated signals and actual earthquake signals is examined with existing *** other tested techniques,SET improves frequency resolution to a great extent by lowering the influence of smearing along the time-frequency ***,interpretation and readability with the proposed method are improved,and small changes in the time-varying frequency characteristics of the damaged buildings are easily detected through the SET method.

关键词： cross-term damage detection earthquake signal synchroextracting transform time-frequency

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent progress in carbonaceous materials based Z-scheme and Sscheme heterojunctions for photocatalytic clean energy generation

引用

新型炭材料(中英文) 2024年

作者： Sahil Rana Amit kumar Wang Tong-tong gaurav sharma Pooja Dhiman Alberto García-Penas Interdisciplinary and Innovate Research Xi'an University of Architecture and Technology Departamento de Ciencia e Ingeniería de Materiales e Ingeniería Química (IAAB) Universidad Carlos III de Madrid International Research Centre of Nanotechnology for Himalayan Sustainability (IRCNHS) Shoolini University

Carbonaceous materials including carbon nanotubes/nanofibers, graphene, graphene oxide, reduced graphene oxide,graphyne, graphdiyne, carbon quantum dots and fullerenes have gained considerable attention in the recent years for their unique properties such as high conductivity, excellent stability and biocompatibility. The integration of these carbonaceous materials into Zscheme and S-scheme heterojunctions has emerged as a transformative strategy to enhance the photocatalytic efficiency for energy conversion applications. This review delves into the fundamental principles of clean energy generation such as photocatalytic H2generation and CO2reduction, elucidating their respective mechanisms and advantages. Furthermore, various types of carbonaceous materials, their synthesis and construction of Z-scheme and S-scheme heterojunctions are discussed emphasizing their role in promoting charge separation, reducing recombination losses and extending the spectral response range. With the focus on solar fuel production,the recent advancements in carbonaceous based Z-scheme and S-scheme heterojunctions are discussed and summarized for photocatalytic H2generation and CO2reduction. Lastly, the current bottlenecks and challenges in the field of carbonaceous based photocatalysts are discussed with the valuable insights for future development in this particular field.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A Review of Lightweight Security and Privacy for Resource-Constrained IoT Devices

引用

Computers, Materials & Continua 2024年第1期78卷 31-63页

作者： Sunil kumar Dilip kumar Ramraj Dangi gaurav Choudhary Nicola Dragoni Ilsun You Department of Computer Science and Engineering National Institute of Technology JamshedpurJamshedpurIndia School of Computing Science and Engineering VIT University BhopalBhopal466114India Center for Industrial Software The Maersk Mc-Kinney Moller InstituteUniversity of Southern DenmarkSonderborgOdenseDenmark Department of Applied Mathematics and Computer Science Technical University of DenmarkLyngby2800Denmark Department of Information Security Cryptologyand MathematicsKookmin UniversitySeoulSouth Korea

The widespread and growing interest in the Internet of Things(IoT)may be attributed to its usefulness in many different *** settings are probed for data,which is then transferred via linked *** are several hurdles to overcome when putting IoT into practice,from managing server infrastructure to coordinating the use of tiny *** it comes to deploying IoT,everyone agrees that security is the biggest *** is due to the fact that a large number of IoT devices exist in the physicalworld and thatmany of themhave constrained resources such as electricity,memory,processing power,and square *** research intends to analyse resource-constrained IoT devices,including RFID tags,sensors,and smart cards,and the issues involved with protecting them in such restricted *** lightweight cryptography,the information sent between these gadgets may be *** order to provide a holistic picture,this research evaluates and contrasts well-known algorithms based on their implementation cost,hardware/software efficiency,and attack resistance *** also emphasised how essential lightweight encryption is for striking a good cost-to-performance-to-security ratio.

关键词： IoT a sensor device lightweight cryptography block cipher smart card security and privacy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

石墨炔:一种用于合成水污染物有效吸附剂的新型炭材料

引用

新型炭材料（中英文） 2024年第2期39卷 173-200页

作者： gaurav sharma Yaksha Verma Amit kumar Pooja Dhiman WANG Tong-tong Florian JStadler 深圳大学材料科学与工程学院深圳市高分子科学与技术重点实验室广东省功能材料界面工程研究中心南山区生物高分子与安全性评价重点实验室广东深圳518055 International Research Centre of Nanotechnology for Himalayan Sustainability(IRCNHS) Shoolini UniversityHimachal Pradesh 173229India 西安建筑科技大学跨学科与创新研究院陕西西安710055

石墨炔(GDY)是一种新生的二维材料,其在去除水溶液中污染物的研究方面引起了广泛关注。GDY是sp和sp2杂化碳原子的框架,其在二维对称网络中存在苯环和二乙基键,因此具有优异的共轭性、独特的可调谐电子性能、以及优异的化学和热稳定性。... 详细信息

石墨炔(GDY)是一种新生的二维材料,其在去除水溶液中污染物的研究方面引起了广泛关注。GDY是sp和sp2杂化碳原子的框架,其在二维对称网络中存在苯环和二乙基键,因此具有优异的共轭性、独特的可调谐电子性能、以及优异的化学和热稳定性。GDY的分子中有C≡C键,且具有均匀分布的三角形孔,可提供更多的反应位点和多种反应路径。因而,GDY具有吸附性,其作为吸附剂时在去除污染水中的油、有机污染物、染料和金属方面表现优异。在已发表的文献中,GDY被用作吸附剂的报道十分有限。本文综述了GDY的合成方法、GDY作为吸附剂的应用以及GDY基吸附剂的表征,并展望了GDY在污染物修复中的应用前景。

关键词：石墨炔合成吸附污染物合理机制

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Deep learning models for tuberculosis detection and infected region visualization in chest X-ray images

引用

Intelligent Medicine 2024年第2期4卷 104-113页

作者： Vinayak sharma Nillmani Sachin kumar Gupta Kaushal kumar Shukla School of Electronics and Communication Engineering Shri Mata Vaishno Devi University Jammu and KashmirIndia School of Biomedical Engineering Indian Institute of TechnologyBanaras Hindu UniversityVaranasiIndia Department of Computer Science and Engineering Indian Institute of TechnologyBanaras Hindu UniversityVaranasiIndia

Objective Tuberculosis(TB)is among the most frequent causes of infectious-disease-related *** being treatable by antibiotics,tuberculosis often goes misdiagnosed and untreated,especially in rural and low-resource *** X-rays are frequently used to aid diagnosis;however,this presents additional challenges because of the possibility of abnormal radiological appearance and a lack of radiologists in areas where the infection is most *** deep-learning-based imaging techniques for computer-aided diagnosis has the potential to enable accurate diagnoses and lessen the burden on medical *** the present work,we aimed to develop deep-learning-based segmentation and classification models for accurate and precise detection of tuberculosis in chest X-ray images,with visualization of infection using gradient-weighted class activation mapping(Grad-CAM)*** First,we trained the UNet segmentation model using 704 chest X-ray radiographs taken from the Montgomery County and Shenzhen Hospital ***,we implemented the trained UNet model on 1,400 tuberculosis and control chest X-ray scans to segment the lung *** images were taken from the National Institute of Allergy and Infectious Diseases(NIAID)TB portal program ***,we applied the deep learning Xception model to classify the segmented lung region into tuberculosis and normal *** further investigated the visualization capabilities of the model using Grad-CAM to view tuberculosis abnormalities in chest X-rays and discuss them from radiological *** For segmentation by the UNet model,we achieved accuracy,Jaccard index,Dice coefficient,and area under the curve(AUC)values of 96.35%,90.38%,94.88%,and 0.99,*** classification by the Xception model,we achieved classification accuracy,precision,recall,F1-score,and AUC values of 99.29%,99.30%,99.29%,99.29%,and 0.999,*** Grad-CAM heatmap images from the tuberculos

关键词： Tuberculosis Artificial intelligence Deep learning Segmentation Classification Chest X-ray

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

碳基材料的Z型和S型异质结光催化清洁能源综述

引用

新型炭材料（中英文） 2024年第3期39卷 458-482页

作者： Sahil Rana Amit kumar WANG Tong-tong gaurav sharma Pooja Dhiman Alberto García-Penas International Research Centre of Nanotechnology for Himalayan Sustainability(IRCNHS) Shoolini UniversitySolan173229India 西安建筑科技大学交叉创新研究院西安710055 Departamento de Ciencia e Ingeniería de Materiales e Ingeniería Química(IAAB) Universidad Carlos Ⅲ de MadridLegan'es28911Spain

碳纳米管/纳米纤维、石墨烯、氧化石墨烯、还原氧化石墨烯、石墨炔、碳量子点和富勒烯等炭材料因具有高导电性、优异的稳定性和生物相容性等独特性能,近年来受到广泛关注。在炭材料中构建Z型和S型异质结已成为在能量转换应用中提高光催... 详细信息

碳纳米管/纳米纤维、石墨烯、氧化石墨烯、还原氧化石墨烯、石墨炔、碳量子点和富勒烯等炭材料因具有高导电性、优异的稳定性和生物相容性等独特性能,近年来受到广泛关注。在炭材料中构建Z型和S型异质结已成为在能量转换应用中提高光催化效率的一种有效策略。本文综述了光催化制氢和CO_(2)还原等清洁能源的基本原理,阐述了它们各自的机理和优势。此外,还讨论了不同类型的炭材料以及其中Z型和S型异质结的合成和构建,强调了它们在促进电荷分离、减少光生载流子复合损失和扩大光谱响应范围方面的作用。以太阳能燃料生产为重点,讨论和总结了碳基Z型和S型异质结在光催化制氢和还原CO_(2)方面的最新进展。最后,讨论了目前碳基光催化剂领域的瓶颈和挑战,并对该领域的未来发展提出了有价值的见解。

关键词：炭材料异质结 Z型 S型光催化氢能材料

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：