检索结果-南通市图书馆

Journal of Iron and Steel Research International 2024年第1期31卷 1-2页

作者： Shuai Liu Jing guo Han-jie guo School of Artificial Intelligence Beijing Technology and Business UniversityBeijing100048China School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China

Spanning three decades,***-jie guo's research group has dedicated itself to exploring the fundamental theories and practical applications of physical chemistry within the realm of *** under the assumption that molecul... 详细信息

关键词： chemistry liquid complexes

Physicochemical principles of hydrogen metallurgy in blast furnace

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 46-63页

作者： Han-jie guo School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials Beijing100083China

Based on the stoichiometric method and the free energy minimization method,an ideal model for the reduction of iron oxides by carbon and hydrogen under blast furnace conditions was established,and the reduction efficiency and theoretical energy consumption of the all-carbon blast furnace and the hydrogen-rich blast furnace were *** results show that after the reduction reaction is completed at the bottom of the blast furnace,the gas produced by reduction at 1600℃still has a certain excessive reduction capacity,which is due to the hydrogen brought in by the hydrogen-rich blast as well as the excess carbon monoxide generated by the reaction of the coke and the oxygen brought in by the *** the process of the gas with excessive reduction capacity rising from the bottom of the blast furnace and gas reduction process,the excessive reduction capacity of the gas gradually decreases with the increase in the dydrogen content in the *** the all-carbon blast furnace,the excess gas reduction capacity is the strongest,and the total energy consumption per ton of iron reduction is the *** shows that,for the current operation mode of the blast furnace,adding hydrogen in the blast furnace cannot reduce the consumption of carbon required for reduction per ton of iron,but rather increases the consumption of carbon.

关键词： Hydrogen metallurgy Excess gas reduction capacity Theoretical energy consumption Hydrogen-rich blast furnace Thermodynamic model Gibbs minimum free energy method

A short review of antibacterial Cu-bearing stainless steel:antibacterial mechanisms,corrosion resistance,and novel preparation techniques

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 24-45页

作者： Shuai Liu Han-jie guo School of Artificial Intelligence Beijing Technology and Business UniversityBeijing100048China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials University of Science and Technology BeijingBeijing100083China

Cu-bearing stainless steel is widely used in the fields of food,medical and household sanitary equipment because of its surface finish and corrosion ***,the growth of bacteria on stainless steel leads to the formation of biofilms,which causes ***,the antibacterial property of stainless steel is a worthy research *** of breakthroughs in the field of corrosion resistance and antimicrobial properties are still ***,due to the scarcity of publications on the antibacterial mechanisms and processing methods of antibacterial Cu-bearing stainless steel,we review the current state of relevant research and *** toxicity of Cu,corrosion resistance mechanism of stainless steel,and antibacterial mechanism and preparation method of antibacterial stainless steel are *** addition,alloying,surface modification and other methods are found to have limitations in balancing the toxicity and antibacterial properties of copper and the relationship between the antibacterial properties and corrosion resistance of Cu-bearing stainless steel.A new preparation method of antibacterial stainless steel associated with selective laser melting(SLM)is *** is becoming a powerful additive manufacturing technology that can be used to manufacture customized and complex *** research status of SLM applied in antibacterial stainless steel preparation is ***,the future research direction of Cu-bearing antibacterial stainless steel is discussed.

关键词： Cu-bearing stainless steel Antibacterial Processing Additive manufacturing Corrosion resistance

Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 108-120页

作者： Zi-han Wang Jing guo Han-jie guo Bin Li School of Metallurgical Engineering University of Science and Technology BeijingBeijing100083China School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina

A high-temperature reduction roasting method was used to achieve metallic iron and zinc recovery from blast furnace gas ash(BFA).The reduction processes for Zn-containing and Fe-containing oxides were analyzed in detail by using ther-modynamic equilibrium calculation and the principle of minimum free *** results showed that the main reaction in the system is the reduction of ZnFe_(2)_(4)and iron *** the full temperature range,iron oxides were more easily reduced than zinc *** of the amount of CO contained in the system,the reduction of ZnO to Zn was difficult to proceed below the boiling point(906℃)of *** the reduction temperature is below 906℃,the reduction process of zinc ferrate was ZnFe_(2)_(4)→ZnO;when the reduction temperature is above 906℃,its reduction process becomed ZnFe_(2)_(4)→ZnO→Zn(g).The metallization and dezincification rates of the BFA gradually increased with increasing reaction *** the C/O ratio increased,the metallization and dezincification rates first increased and then *** effect of reduction time on BFA reduction was similar to that of reaction temperature.

关键词： Blast furnace gas ash Thermodynamics Zinc removal Iron reduction High-temperature reduction roasting Integrated utilization

Distribution of oxide inclusions in H13 castings under super-gravity field with multi-stage rotation speeds

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 121-133页

作者： Shao-ying Li Xiao-jun Xi Xing-ming Zhao Han-jie guo Jing guo School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials Beijing100083China Beijing Beiye Functional Materials Corporation Beijing100192China Shandong Tianwu Forming Technology Co. Ltd.Liaocheng252024ShandongChina

The 42 kg industrial H13 castings were prepared by different super-gravity fields with multi-rotation speeds,and the distribution of oxide inclusions in the castings was *** addition,the inward movement Reynolds number and inward movement time of oxide inclusions as well as the solidification time of molten steel at different positions in the castings were calculated to clarify the removal mechanism of oxide inclusions in super-gravity *** results show that the large size(i.e.,greater than 10μm)oxide inclusions are mainly concentrated in the inner and outer parts of the super-gravity castings with constant rotation speed(500 r min^(-1))and five-stage rotation speeds(500,600,750,850,and 950 r min^(-1)),respectively,while there are no large oxide inclusions in the super-gravity castings with three-stage rotation speeds(500,600,and 750 r min^(-1)).Although an increase in the particle size of inclusion and the rotation speed in super-gravity field is conducive to the increase in the inward movement Reynolds number of oxide inclusions and reduction in the inward movement time of oxide inclusions,it will reduce the local solidification time of molten *** the range of the rotation speed studied,the super-gravity field with three-stage rotation speeds has the best effect on the removal of inclusions in H13 molten steel.

关键词： Distribution Oxide inclusion H13 casting Super-gravity field Rotation speed

Effect of slag composition on kinetic behavior of deep deoxidation of 5 wt.% Si high-silicon austenitic stainless steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 1873-1885页

作者： Guan-xiong Dou Han-jie guo Jing guo Xue-cheng Peng Qing-yun Chen School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing 100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials Beijing 100083China

Based on a thermodynamic study of 5 wt.%Si high-silicon austenitic stainless steel(SS-5Si)smelting using CaF_(2)-CaO-Al_(2)0_(3)-Mg-Si0_(2) slag to obtain a low oxygen content of less than 10×10^(-4) wt.%,a kinetic mass transfer model for deep deoxidation was established through laboratory studies,and the effects of slag components and temperature on deoxidation during the slag-steel reaction process of sS-5Si were systematically *** experimental data verified the accuracy of the model *** results showed that the final oxygen content in the steel at 1873 K was mainly controlled by the oxygen content derived from the activity of SiO_(2) regulated by the[Si]-[O]equilibrium reaction in the slag system;in particular,when the slag basicity R(R=w(CaO)/w(SiO2),where w(CaO)and w(SiO_(2))are the contents of CaO and SiO_(2) in the slag,respectively)is 3,the Al2O3 content in the slag needs to be less than 2.7%.The mass transfer rate equation for the kinetics of the deoxidation reaction revealed that the mass transfer of oxygen in the liquid metal is the rate-controlling step under different slag conditions at 1873 K,and the oxygen transfer coefficient ko.m increases with increasing the slag basicity from 4.0×10^(-6)m s^(-1)(R=1)to 4.3×10^(-5) m s^(-1)(R=3).ko.m values at R=2 and R=3 are almost the same,indicating that high slag basicity has little *** integral of the mass transfer rate equation for the deoxidation reaction of SS-5Si under different slag conditions is *** total oxygen content of the molten steel decreases with increasing basicity from an initial content of 22×10^(-4) to 3.2×10^(-4) wt.%(R=3),consistent with the change in ko.m with slag *** R=2,the slag-steel reaction takes 15 min to reach equilibrium(w[O]=5.5×10^(-4) wt.%),whereas at R=3,the slag-steel reaction takes 30 min to reach equilibrium(w[0]=3.2×10^(-4) wt.%).Considering the depth of deoxidation and reaction time of SS-5Si smelting,it is recommended the slag b

关键词： Slag-steel reaction Kinetics Rate-controlling step Deep deoxidation Transfer coefficient

Characteristics and stability of oxide+carbonitride in H13 steel at 1250℃

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 134-142页

作者： Xiao-lin Sun Han-jie guo Jing guo Fei Wang Dong Xu Gao-yang Song Shuai Wang School of Materials Science and Engineering Hebei University of EngineeringHandan056038HebeiChina School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing100083China High Temperature Materials Research Institute Central Iron and Steel Research Institute Co.Ltd.Beijing100081China Technology Innovation Center for High Quality Cold Heading Steel of Hebei Province Hebei University of EngineeringHandan056038HebeiChina

The morphology,size,quantity,and composition of complex oxide+carbonitride in H13 steel held at 1250℃for 5,10,and 15 h were *** results show that the ratio and number of complex carbonitrides with cores in H13 steel are gradually increased when holding at 1250℃compared with those in the original H13 steel,and the core size *** are one or more oxide cores in(Ti_(x),V_(1-x))(Cy,N_(1-y)),including xCaO·zAl_(2)O_(3),xCaO·yMgO·zAl_(2)O_(3),and CaO after holding at 1250℃,in addition to MgO·Al_(2)O_(3)and Al_(2)O_(3)in the original *** equilibrium temperature for(Ti_(x),V_(1-x))(Cy,N_(1-y))precipitation at the solidification front and decomposition in the solid state was theoretically analyzed,which was affected by the x value and the product of Ti and N contents in H13 ***,the composition of(Ti_(x),V_(1-x))(Cy,N_(1-y))is influenced by the oxide *** is convinced that(Ti_(x),V_(1-x))(Cy,N_(1-y))with oxide cores has a higher stability,especially for oxides with a high Al_(2)O_(3)*** treatment at high temperature facilitates a more reasonable analysis of oxide+carbonitride,and the generation mechanism of oxide+carbonitride was discussed.

关键词： Complex carbonitride Decomposition Oxide core Characteristic Stability

Reduction behavior of iron ore powder by high-volatile coal in thermogravimetric-gas chromatographic and kinetic analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 92-107页

作者： Rui-meng Shi Qi-yuan Mi Bin Li Xiao Shi Chong Zou Jing guo Han-jie guo School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina China International Engineering Consulting Corporation Beijing100048China School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing100083China

The reduction behavior of iron ore powder by high-volatile coal was investigated,and its kinetic mechanism was *** effect of volatiles in coal on the reduction reaction of iron ore was compared by utilizing a Xinjiang lignite with a high volatile content and its pyrolysis carbon produced by high-temperature pyrolysis to remove volatiles,serving as a *** mass loss and gas composition of the samples during the reduction process were detected using thermo-gravimetric analysis and gas chromatography,and the morphological changes of iron ore powder were observed through scanning electron *** kinetic parameters of the iron oxide reduction reaction were calculated by the Flynn-Ozawa-Wall method,and the kinetic mechanism of volatile participation in the iron oxide reduction reaction was determined through the Coats-Redfern *** results indicate that the coupling effect between the high-volatile coal pyrolysis and reduction reactions occurs during the second stage of the entire coupling process,which corresponds to the late stage of coal pyrolysis with a substantial release of H_(2)and *** volatiles in coal actively participated in the reduction reaction,reducing the initiation temperature of the reaction by around 200℃.The reduction of iron oxides by high-volatile coal was jointly promoted by the"hydrogen cycle"and"carbon cycle",resulting in a higher reduction extent and metallization rate at the end of the *** high-volatile coal was used as the reductant,the average activation energy for the entire process was 76.5 kJ/mol,a significant decrease compared to the employment of pyrolysis carbon without volatiles as the reductant(1167 kJ/mol).

关键词： Direct reduction High-volatile coal Volatile Kinetics Reduction mechanism

Automatic recognition of landslides based on YOLOv7 and attention mechanism

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Mountain Science 2024年第8期21卷 2681-2695页

作者： SONG Yewei guo jie WU Gaofeng MA Fengshan LI Fangrui Key Laboratory of Shale Gas and Geoengineering Institute of Geology and GeophysicsChinese Academy of SciencesBeijing 100029China Innovation Academy for Earth Sciences Chinese Academy of SciencesBeijing 100029China University of Chinese Academy of Sciences Beijing 100049China

Landslide disasters comprise the majority of geological incidents on slopes,posing severe threats to the safety of human lives and property while exerting a significant impact on the geological *** rapid identification of landslides is important for disaster prevention and control;however,currently,landslide identification relies mainly on the manual interpretation of remote sensing *** interpretation and feature recognition methods are time-consuming,labor-intensive,and challenging when confronted with complex ***,automatic landslide recognition has emerged as a pivotal avenue for future *** this study,a dataset comprising 2000 landslide images was constructed using open-source remote sensing images and *** YOLOv7 model was enhanced using data augmentation algorithms and attention *** optimization models were formulated to realize automatic landslide *** findings demonstrate the commendable performance of the optimized model in automatic landslide recognition,achieving a peak accuracy of 95.92%.Subsequently,the optimized model was applied to regional landslide identification,co-seismic landslide identification,and landslide recognition at various scales,all of which showed robust recognition ***,the model exhibits limitations in detecting small targets,indicating areas for refining the deep-learning *** results of this research offer valuable technical support for the swift identification,prevention,and mitigation of landslide disasters.

关键词： Deep learning Landslide detection Natural disasters Attention mechanism Remote sensing

Role of alloying and heat treatment on microstructure and mechanical properties of cast Al-Li alloys:A review

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第5期21卷 445-460页

作者： guo-hua Wu You-jie guo Fang-zhou Qi Shen Zhang Yi-xiao Wang Xin Tong Liang Zhang School of Materials Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China

Due to the prominent advantages of low density,high elastic modulus,high specific strength and specific stiffness,cast Al-Li alloys are suitable metallic materials for manufacturing complex large-sized components and are ideal structural materials for aerospace,defense and military *** the basis of the microstructural characteristics of cast Al-Li alloys,exploring the role of alloying and micro-alloying can stabilize their dominant position and further expand their application *** this review,the development progress of cast Al-Li alloys was summarized *** to the latest research highlights,the influence of alloying and heat treatment on the microstructure and mechanical properties was systematically *** potential methods to improve the alloy performance were *** response to the practical engineering requirements of cast Al-Li alloys,the scientific challenges and future research directions were discussed and prospected.

关键词： cast Al-Li alloy alloying microstructure mechanical properties heat treatment