检索结果-南通市图书馆

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82gd-0.2Zn-0.2Zr alloy

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 136-146页

作者： Chenjin zhang guangyu yang Lei Xiao Zhiyong Kan Jing guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China College of Materials Science and Engineering Fuzhou UniversityFuzhou 350108China College of Chemistry and Environmental Science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TyS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

Potential role and therapeutic implications of glutathione peroxidase 4 in the treatment of Alzheimer's disease

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第3期20卷 613-631页

作者： yanxin Shen guimei zhang Chunxiao Wei Panpan Zhao yongchun Wang Mingxi Li Li Sun Department of Neurology and Neuroscience Center The First Hospital of Jilin UniversityJilin UniversityChangchunJilin ProvinceChina Cognitive Impairment Center Department of NeurologyThe First Hospital of Jilin UniversityJilin UniversityChangchunJilin ProvinceChina

Alzheimer's disease is an age-related neurodegenerative disorder with a complex and incompletely understood pathogenesis. Despite extensive research, a cure for Alzheimer's disease has not yet been found. Oxidative stress mediates excessive oxidative responses, and its involvement in Alzheimer's disease pathogenesis as a primary or secondary pathological event is widely accepted. As a member of the selenium-containing antioxidant enzyme family, glutathione peroxidase 4 reduces esterified phospholipid hydroperoxides to maintain cellular redox homeostasis. With the discovery of ferroptosis, the central role of glutathione peroxidase 4 in anti-lipid peroxidation in several diseases, including Alzheimer's disease, has received widespread attention. Increasing evidence suggests that glutathione peroxidase 4 expression is inhibited in the Alzheimer's disease brain, resulting in oxidative stress, inflammation, ferroptosis, and apoptosis, which are closely associated with pathological damage in Alzheimer's disease. Several therapeutic approaches, such as small molecule drugs, natural plant products, and non-pharmacological treatments, ameliorate pathological damage and cognitive function in Alzheimer's disease by promoting glutathione peroxidase 4 expression and enhancing glutathione peroxidase 4 activity. Therefore, glutathione peroxidase 4 upregulation may be a promising strategy for the treatment of Alzheimer's disease. This review provides an overview of the gene structure, biological functions, and regulatory mechanisms of glutathione peroxidase 4, a discussion on the important role of glutathione peroxidase 4 in pathological events closely related to Alzheimer's disease, and a summary of the advances in small-molecule drugs, natural plant products, and non-pharmacological therapies targeting glutathione peroxidase 4 for the treatment of Alzheimer's disease. Most prior studies on this subject used animal models, and relevant clinical studies are lacking. Future clinica

关键词： apoptosis ferroptosis inflammation lipid peroxidation natural plant products neurodegenerative disorder neuroprotection oxidative stress small-molecule drugs

Prevalence of Helicobacter pylori infection in Chinese military personnel:A cross-sectional,multicenter-based study

在线全文

学校读者我要写书评

暂无评论

World Journal of gastroenterology 2025年第3期31卷 42-49页

作者： Han-Chen Min Chun-yan zhang Fang-yu Wang Xiao-Hui yu Shan-Hong Tang Hong-Wu Zhu ya-gang Zhao Ji-Luo Liu Jian Wang Jing-Han guo Xiao-Mei zhang yun-Sheng yang Chinese People’s Liberation Army Medical School Chinese People’s Liberation Army General HospitalBeijing 100853China Department of gastroenterology and Hepatology The First Medical CenterChinese People’s Liberation Army General HospitalBeijing 100853China Sixth Healthcare Department The Second Medical CenterChinese People’s Liberation Army General HospitalBeijing 100853China Department of gastroenterology The 940th Hospital of Joint Logistic Support Force of Chinese People’s Liberation ArmyLanzhou 730050Gansu ProvinceChina Department of gastroenterology General Hospital of Western Theater CommandChengdu 610011Sichuan ProvinceChina Department of gastroenterology General Hospital of Southern Theater CommandGuangzhou 510010Guangdong ProvinceChina Department of Epidemiology Naval Medical UniversityShanghai 200433China School of Medicine Nankai UniversityTianjin 300071China National Clinical Research Center for geriatric Diseases Chinese People’s Liberation Army General HospitalBeijing 100853China

BACKgROUND Helicobacter pylori(***)infection is a prevalent disease encountered in military internal medicine and recognized as the main cause of dyspepsia,gastritis,and peptic ulcer,which are common diseases in military *** guidelines in China state all patients with evidence of active infection with *** are offered ***,the prevalence of *** infection and its regional distribution in the military population remain unclear,which hinders effective prevention and treatment *** the prevalence of *** infection in the military population will aid in the development of customized strategies to better manage this infectious *** To investigate the prevalence of *** infection in the Chinese military population in different geographic *** This multicenter,retrospective study included 22421 individuals from five tertiary hospitals located in north,east,southwest,and northwest cities of *** infection was identified using the urea breath test,which had been performed between January 2020 and December *** Of the 22421 military service members,7416(33.1%)were urea breath *** highest prevalence of *** was in the 30-39 years age group for military personnel,with an infection rate of 34.9%.The majority of infected subjects were younger than 40-years-old,accounting for 70.4%of the infected *** individuals serviced in Lanzhou and Chengdu showed a higher infection prevalence than those in Beijing,Nanjing,and guangzhou,with prevalence rates of 44.3%,37.9%,29.0%,31.1%,and 32.3%,*** *** infection remains a common infectious disease among military personnel in China and has a relatively high prevalence rate in northwest China.

关键词： Helicobacter pylori Prevalence Military personnel Urea breath test Multicenter study

CLM5.0对青藏高原冻融过程土壤温湿度的模拟及评估

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

高原气象 2025年第1期44卷 32-45页

作者：张哲浩赖欣张戈姚思源张粟瑜成都信息工程大学大气科学学院/高原大气与环境四川省重点实验室/气候与环境变化联合实验室/成都平原城市气象与环境四川省野外科学观测研究站四川成都610225

利用1979-2018年中国区域地面气象要素驱动数据集(0.1°×0.1°)作为大气强迫资料,驱动CLM5.0(Community Land Model version 5.0)模拟了青藏高原地区1979-2018年的土壤温湿度变化。将土壤冻融过程划分为冻结期和非冻结期,通过两个阶段... 详细信息

利用1979-2018年中国区域地面气象要素驱动数据集(0.1°×0.1°)作为大气强迫资料,驱动CLM5.0(Community Land Model version 5.0)模拟了青藏高原地区1979-2018年的土壤温湿度变化。将土壤冻融过程划分为冻结期和非冻结期,通过两个阶段的CLM5.0模拟与站点观测资料、同化资料(gLDAS-Noah)、卫星遥感资料(MODIS土壤温度资料和ESA CCI-COMBINED土壤湿度资料)的对比验证,探讨CLM5.0模拟土壤温湿度在青藏高原的适用性。结果表明:(1)CLM5.0可较准确地描述站点土壤温湿度的动态变化,CLM5.0模拟的土壤温湿度与观测资料具有一致的变化特征且数值上较为接近。CLM5.0模拟的准确性高于gLDAS-Noah。CLM5.0对站点土壤温度的描述更为准确。(2)CLM5.0能够较准确地描述高原冻融过程中的土壤温湿度特征,CLM5.0模拟土壤温湿度与MODIS和ESA CCICOMBINED遥感资料在高原总体呈显著正相关,相关系数大多在0.9以上。CLM5.0对土壤温度的模拟能力相对较好,对非冻结期土壤湿度的模拟能力优于冻结期。CLM5.0整体高估了土壤温度,平均偏差大多在0~4℃之间。土壤湿度的平均偏差大多在-0.1~0.1 m^(3)·m^(-3)之间,非冻结期的平均偏差相对较小。(3)CLM5.0模拟、gLDAS-Noah、MODIS和ESA CCI-COMBINED遥感资料的土壤温湿度均具有相似的空间分布,其中土壤温度空间分布特征相似度更高。CLM5.0具有较高的空间分辨率和更为精细的土壤分层,对土壤温湿度细节的刻画更为完善。(4)CLM5.0模拟资料在高原整体呈增温变干趋势,MODIS和ESA CCI-COMBINED遥感资料整体呈增温增湿趋势。CLM5.0模拟的土壤温度变化趋势相对准确,土壤湿度的变化趋势则存在较大偏差。

关键词：青藏高原 CLM5.0模拟冻融过程土壤温湿度

Clinical effects of phospholipase D2 in attenuating acute pancreatitis

在线全文

学校读者我要写书评

暂无评论

World Journal of gastroenterology 2025年第2期31卷 52-60页

作者： Jin-Wei Niu guo-Chao zhang Wu Ning Hai-Bin Liu Hua yang Chao-Feng Li Department of general Surgery China-Japan Friendship HospitalBeijing 100029China

BACKgROUND The objective of the current study was to elucidate the clinical mechanism through which phospholipase D2(PLD2)exerted a regulatory effect on neutrophil migra-tion,thereby alleviating the progression of acute *** To elucidate the clinical mechanism through which PLD2 exerted a regulatory effect on neutrophil migration,thereby alleviating the progression of acute *** The study involved 90 patients diagnosed with acute pancreatitis,admitted to our hospital between March 2020 and November 2022.A retrospective analysis was conducted,categorizing patients based on Ranson score severity into mild(n=25),moderate(n=30),and severe(n=35)*** data was collected for each *** blot analysis assessed PLD2 protein expression in patient ***-time reverse transcription polymerase chain reaction was used to evaluate the mRNA expression of chemokine receptors associated with neutrophil *** levels of inflammatory factors in patients were detected using enzyme-linked immunosorbent *** migration tests were conducted to compare migration of neutrophils across groups and analyze the influence of PLD2 on neutrophil *** Overall data analysis did not find significant differences between patient groups(P>0.05).The expression of PLD2 protein in the severe group was lower than that in the moderate and mild groups(Pgroup was also lower than that in the mild group(Py of acute pancreatitis is negatively correlated with PLD2 expression(r=-0.75,P=0.002).The mRNA levels of C-X-C chemokine receptor type 1,C-X-C chemokine receptor type 2,C-C chemokine receptor type 2,and C-C chemokine receptor type 5 in the severe group are significantly higher than those in the moderate and mild groups(Pgroup are also higher than those in the mild group(P<0.05).The levels of C-reactive protein,tumo

关键词： Phospholipase D2 Neutrophil migration Acute pancreatitis Retrospective analysis Inflammatory response

The Log-Concavity of Kazhdan-Lusztig Polynomials of Uniform Matroids

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2023年第1期36卷 117-128页

作者： XIE Matthew H y zhang Philip B College of Science Tianjin University of TechnologyTianjin 300384China College of Mathematical Science Tianjin Normal UniversityTianjin 300387China

Elias,et al.(2016)conjectured that the Kazhdan-Lusztig polynomial of any matroid is *** by a computer proof of Moll’s log-concavity conjecture given by Kauers and Paule,the authors use a computer algebra system to pr... 详细信息

关键词： HolonomicFunctions Kazhdan-Lusztig polynomial log-concavity uniform matroid

FRACTURE MECHANISM AND MICROMECHANICAL ANALySIS OF POLySyNTHETICALLy TWINNED CRySTALS OF γTiAl ALLOyS

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊:英文版 1999年第S1期9卷 130-137页

作者： y.g.zhang y.H.Lu g.K.Hu C.Q.Chen Department of Materials Science and Engineering Beijing University of Aeronautics and Astronautics UnversityBeijing 100083China Department of Applied Mechanics Beijing Institute of TechnologyBeijing 100081China

The fracture behavior and mechanism of PST crystals of a Ti 49%(mole fraction)Al alloy have been studied by using in situ straining and micromechanical calculation. The three dimensional micromechanical model representing the structure of PST crystal has been built, and the stress distribution ahead of the sharp and blunt crack tips either parallel to lamellar interface or perpendicular to the lamellae has been calculated by using finite element method based on linear elasticity of PST crystals. The experimental results show that the fracture behaviors and mechanisms are strongly dependent on the angle of loading axis to the lamellae. The calculation indicates that nucleation and propagation of microcrack along the interfaces are controlled by the normal stress and translamellar microcrack is controlled by shear stress ahead of crack tip.

关键词： TiAl alloy PST crystal fracture behavior mechanism micromechanical model finite element method

Mechanisms of eutectic lamellar destabilization upon rapid solidification of an undercooled Ag-39.9 at.% Cu eutectic alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2020年第24期59卷 173-179页

作者： H.Dong y.Z.Chen Z.R.zhang g.B.Shan W.X.zhang F.Liu State Key Lab.of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China yangtze River Delta Research Institute of NPU Taicang 215400China

The eutectic Ag-Cu alloys exhibiting fine Ag-Cu lamellar eutectic structure formed upon rapid solidification have great potentials being used in various engineering ***,the desired fine primary lamellar eutectic structure(PLES)is usually replaced by a coarse anomalous eutectic structure(AES)when the undercooling prior to solidification exceeds a certain *** forming mechanism of AES in the undercooled eutectic Ag-Cu alloy has been a controversial *** this work,the undercooled Ag-39.9 at.% Cu eutectic alloy is solidified under different cooling conditions by using techniques of melt fluxing and copper mold *** results show that the coupled eutectic growth of this alloy undergoes a transition from a slow eutectic-cellular growth(ECg)to a rapid eutectic-dendritic growth(EDg)above a undercooling of 72 K,accompanying with an abrupt change of the distribution and amount of AES in as-solidified *** kinds of primary lamellar eutectic structures are formed by ECg and EDg during recalescence,*** destabilization of PLES that causes the formation of AES is ascribed to two different mechanisms based on the microstructural examination and theoretical *** 72 K,the destabilization of PLES formed by slow ECg is caused by the mechanism of"termination migration"driven by interfacial *** above 72 K,the destabilization of PLES formed by rapid EDg is attributed to the unstable perturbation of interface driven by interfacial energy and solute supersaturation.

关键词： Ag-Cu alloys Rapid solidification Undercooling Eutectics Destabilization

Data-driven evaluation of fatigue performance of additive manufactured parts using miniature specimens

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2019年第6期35卷 1137-1146页

作者： H.y. Wan g.F. Chen C.P. Li X.B. Qi g.P. zhang Shenyang National Laboratory for Materials Science Institute of Metal Research Chinese Academy of Sciences 72 Wenhua Road Shenyang 110016 China School of Materials Science and Engineering University of Science and Technology of China Shenyang 110016 China Materials Manufacturing Qualification group Corporate Technology Siemens Ltd. China Beijing 100102 China State Key Laboratory of Tribology Tsinghua University Beijing J00084 China

This overview firstly introduces the state-of-the-art research progress in length scale-related fatigue performance of conventionally-fabricated metals evaluated by miniature specimens. Some key factors for size effects sensitive to microstructures including the specimen thickness, grain size and a ratio between them are highlighted to summarize some general rules for size effects. Then, ongoing research progress and new challenges in evaluating the fatigue performance of additive manufactured parts controlled by location-specific defects, microstructure heterogeneities as well as mechanical anisotropy using miniature specimen testing technique are discussed and addressed. Finally, a potential roadmap to establish a data-driven evaluation platform based on a large number of miniature specimen-based experiment data,theoretical computations and the ’big data’ analysis with machine learning is proposed. It is expected that this overview would provide a novel strategy for the realistic evaluation and fast qualification of fatigue properties of additive manufactured parts we have been facing to.

关键词： Additive manufacturing Miniature specimen Fatigue Size effect Location-specific Data analysis