检索结果-南通市图书馆

Applied Mathematics and Mechanics(English Edition) 2022年第3期43卷 389-402页

作者： B.J.gIREESHA M.L.KEERTHI g.sowmya Department of Pg Studies and Research in Mathematics Kuvempu UniversityShankaraghatta 577451India Department of Pg Mathematics The National College(Auto)Bangalore 560070India

The present investigation focuses on the thermal performance of a fully wet stretching/shrinking longitudinal fin of exponential profile coated with a mechanism like a conveyer *** modeled equation is non-dimensionalized and solved by applying the Runge-Kutta-Fehlberg(RKF)*** effects of parameters such as the wet parameter,the fin shape parameter,and the stretching/shrinking parameter on the heat transfer and thermal characteristics of the fin are graphically analyzed and *** is inferred that the negative effects of motion and internal heat generation on the fin heat transfer rate can be lessened by setting a shrinking mechanism on the fin *** current examination is inclined towards practical applications and is beneficial to the design of fins.

关键词： fully wet longitudinal fin convection exponential profile internal heat generation moving fin

Consequence of exponential heat generation on non-Darcy- Forchheimer flow of water based carbon nanotubes driven by a curved stretching sheet

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2020年第11期41卷 1723-1734页

作者： B.J.gIREESHA B.NAgARAJA S.SINDHU g.sowmya Department of P.g.Studies and Research in Mathematics Kuvempu UniversityShankaraghatta 577451India

The present article comprises the study on the influence of exponential space based heat generation on the non-Darcy-Forchheimer flow of carbon nanotubes(CNTs).The flow is considered over a curved stretching *** variables are used to reduce the flow descriptive nonlinear partial derivative equations to simple *** equations are then solved by the exploiting Runge-Kutta-Fehlberg fourth-and fifth-order *** numerical solutions are shown in graphs and *** between single and multi-walled CNTs has been established through the tabulated values and plotted *** is concluded that the heat source parameter plays a prime role in enhancement of temperature,and the curvature parameter has adverse impact on velocity and temperature *** the inertial parameter and inverse-Darcy number affect the fluid velocity.

关键词： exponential heat generation non-Darcy-Forchheimer flow carbon nanotube(CNT) curved stretching sheet

Unsupervised intrusion detection system for in-vehicle communication networks

在线全文

学校读者我要写书评

暂无评论

Journal of Safety Science and Resilience 2024年第2期5卷 119-129页

作者： Kabilan N Vinayakumar Ravi V sowmya Center for Computational Engineering and Networking(CEN) Amrita School of Artificial InteligenceAmrita Vishwa VidyapeethamCoimbatoreIndia Center for Artificial Intlligence Prince Mohammad Bin Fahd UniversityKhobarSaudi Arabia

In-vehicle communication has been optimized day to day to keep updated of the *** area network(CAN)is used as a standard communication method because of its efficient and reliable ***,CAN is prone to several network level attacks because of its lack in security *** methods have been introduced to incorporate this in *** proposed an unsupervised method of intrusion detection for in-vehicle communication networks by combining the optimal feature extracting ability of autoencoders and more precise clustering using fuzzy C-means(FCM).The proposed method is light weight and requires less computation *** performed an extensive experiment and achieved an accuracy of 75.51%with the ML35o in-vehicle intrusion *** experimental result,the proposed method also works better for other intrusion detection problems like wireless intrusion detection datasets such as WNS-DS with accuracy of 84.05%and network intrusion detection datasets such as KDDCup with accuracy 60.63%,UNSW_NB15 with accuracy 73.62%and Information Security Center of Excellence(Iscx)with accuracy 74.83%.Overall,the proposed method outperforms the existing methods and avoids labeled datasets when training an in-vehicle intrusion detection *** results of the experiment of our proposed method performed on various intru-sion detection datasets indicate that the proposed approach is generalized and robust in detecting intrusions and can be effectively deployed in real time to monitor CAN traffic in vehicles and proactively alert during attacks.

关键词： Controlarea network Intrusiondetection Unsupervised learning Autoencoders Fuzzy C-means

Cr-induced fusion reactions to synthesize superheavy elements

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第5期35卷 122-130页

作者： S.Madhu H.C.Manjunatha N.sowmya B.M.Rajesh L.Seenappa R.S.Susheela Department of Physics R V College of EngineeringBangalore 560074India Visvesvaraya Technological University BelagaviKarnataka 590018India Department of Physics Government First Grade CollegeSrinivasapurKarnataka 563135India Department of Physics Government First Grade CollegeDevanahallyKarnataka 562110India Department of Physics Government First Grade CollegeMulbagalKarnataka 563131India Department of Physics Government First Grade collegeNanjangudOoty RoadMysore 571301India

We investigated ^(50,52-54)Cr-induced fusion reactions for the synthesis of the superheavy element in the 104≤Z≤122 *** cross sections produced in this investigation using ^(54)Cr projectiles were compared with those obtained in prior *** estimated cross sections from this analysis are consistent with the findings of prior *** the current study,the predicted cross section was found to be 42fb at 236 MeV for ^(53)Cr+^(243)Am,23.2 fb at 236 MeV for ^(54)Cr+^(247)Cm,95.6 fb at 240 MeV for ^(53)Cr+248Bk,and 1.33 fb at 242 MeV for ^(53)Cr+***,these projected cross sections with excitation energy and beam energy will be useful in future Cr-induced fusion reaction investigations.

关键词： Fusion cross sections Compound nucleus formation probability Survival probability Evaporation residue cross sections

A novel diurnal and seasonal variation analysis of BTEX in Bengaluru urban area

在线全文

学校读者我要写书评

暂无评论

Research in Cold and Arid Regions 2024年第1期16卷 14-19页

作者： H.N.sowmya M.Dinamani g.P.Shivashankara H.K.Ramaraju B.S.Surendra Vijaya V.Shanbhag R.Prajwal Department of Civil Engineering Dayananda Sagar College of EngineeringBangalore 560078India Department of Chemistry Dayananda Sagar College of EngineeringBangalore 560078India Department of Physics GFGCVijayanagarBengaluru 560040India

In the urban atmosphere of Bengaluru, various volatile organic compounds(VOCs), particularly Benzene,Toluene, Ethylbenzene, and Xylene(BTEX), have shown an increasing trend in concentration. The present research was conducted during summer and monsoon seasons, focusing on Kadubeesanahalli, a high-traffic area within the Bengaluru Metropolitan City. Hourly sample data was collected using a BTEX analyzer(Model gC955-600) and subsequently transformed into daily, monthly, and seasonal values. The study revealed distinct patterns in benzene concentrations. Benzene levels were lowest during the early morning hours, specifically from 1:00 *** 7:00 a.m.. Concentrations then increased from 7:00 a.m. to 9:00 a.m. and again from 4:00 p.m. to 11:00 p.m.,corresponding to the morning and evening peak traffic hours. However, between 10:00 a.m. and 4:00 p.m., the concentration decreased due to reduced traffic levels. These diurnal variations in benzene concentration are influenced by meteorological parameters. Comparing the two seasons, higher concentrations of Benzene, EthylBenzene, and MP-xylene were observed during the summer season. This increase is attributed to the elevated temperatures during summer, which promote the vaporization of BTEX compounds. Conversely, lower BTEX concentrations were recorded during the monsoon season due to the wet deposition process. The observed positive correlation(r > 0.5) among BTEX parameters strongly suggests a common source, most likely originating from vehicular emissions.

关键词： BTEX Summer variation Meteorological parameters Correlation

Empirical model for fusion cross sections of Ca-induced reactions

在线全文

学校读者我要写书评

暂无评论

Chinese Physics C 2024年第3期48卷 126-132页

作者： Reddi Rani.L N.sowmya K.N Sridhar H C.Manjunatha M.M.Armstrong Arasu Department of Physics St.Joseph's College(Autonomous)Affiliated to Bharathidasan UniversityTiruchirappalli620002TNIndia Department of Physics Govt.First.Grade CollegeChikkaballapur-562101KarnatakaIndia Department of Physics Govt.First.Grade CollegeMalur-563160KarnatakaIndia Department of Physics Govt.First.Grade CollegeDevanahalli-562110KarnatakaIndia

A new empirical formula for the astrophysical S-factor has been suggested as a function of the Coulomb interaction parameter,center of mass energy,and barrier *** 22 fusion reactions with ^(40,48)Ca as projectiles were considered for different targets,leading to compound nuclei with atomic and mass numbers varying between 40≤Z≤≤Z≤112 and 88≤A≤27888≤A≤278,*** fusion cross-sections have been estimated using the geometric factor,the gamow-Sommerfield factor,and the empirical formula for the *** study's findings showed better agreement with those of available experiments when compared to Wong's *** present work leads to a smaller standard deviation value than Wong's formula when used to correlate the experimental data of calcium-induced fusion ***'s formula provides a good approximation of fusion cross-sections when the center of mass energy is below the fusion barrier when compared to above the fusion barrier.

关键词： fusion cross-sections Wong formula gamow-Sommerfield-factor geometric-factor S-factor

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： gürel Cam Ali günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

Recent research in mechanical properties of geopolymer-based ultrahigh-performance concrete:A review

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 67-88页

作者： g.Murali Division of Research&Innovation Uttaranchal UniversityDehradun 248007India

Due to the growing need for sustainable and ultra-high-strength construction materials,scientists have created an innovative ultra-high-performance concrete called geopolymer based ultra-highperformance concrete(gUHPC).Besides,in the last few decades,there have been a lot of explosions and ballistic attacks around the world,which have killed many civilians and fighters in border *** this context,this article reviews the fresh state and mechanical properties of ***,the ingredients of gUHPC and fresh properties such as setting time and flowability are briefly ***,the review of compressive strength,flexure strength,tensile strength and modulus of elasticity of fibrous ***,the blast and projectile impact resistance performance was ***,the microstructural characteristics were reviewed using the scanning electron microscope and X-ray Powder *** review outcome reveals that the mechanical properties were increased when 30%silica fume was added to a higher dose of steel fibre to improve the microstructure of *** is hypothesized that the brittleness of gUHPC was mitigated by adding 1.5%steel fibre reinforcement,which played a role in the decrease of contact explosion cratering and *** the need for cement in gUHPC was a key factor in the review,indicating a promising potential for lowering carbon ***,gUHPC research is still in its early stages,so more study is required before its full potential can be utilized.

关键词： Mechanical properties Blast Projectile impact Fibre geopolymer Silica fume Alkaline activators

The HIF-1α/PLOD2 axis integrates extracellular matrix organization and cell metabolism leading to aberrant musculoskeletal repair

在线全文

学校读者我要写书评

暂无评论

Bone Research 2024年第2期12卷 289-301页

作者： Heeseog Kang Amy L.Strong Yuxiao Sun Lei guo Conan Juan Alec C.Bancroft Ji Hae Choi Chase A.Pagani Aysel A.Fernandes Michael Woodard Juhoon Lee sowmya Ramesh Aaron W.James David Hudson Kevin N.Dalby Lin Xu Robert J.Tower Benjamin Levi Center for Organogenesis Regeneration and TraumaDepartment of SurgeryUniversity of Texas SouthwesternDallasTX 75390USA Section of Plastic Surgery Department of SurgeryUniversity of MichiganAnn ArborMI 48109USA Quantitative Biomedical Research Center Peter O’Donnell Jr.School of Public HealthUniversity of Texas SouthwesternDallasTX 75390USA Department of Orthopedics and Sports Medicine University of WashingtonSeattleWA 98195USA Division of Chemical Biology and Medicinal Chemistry College of PharmacyUniversity of Texas at AustinAustinTX 78712USA Department of Pathology Johns Hopkins UniversityBaltimoreMD 21218USA

While hypoxic signaling has been shown to play a role in many cellular processes,its role in metabolism-linked extracellular matrix(ECM)organization and downstream processes of cell fate after musculoskeletal injury remains to be ***(HO)is a debilitating condition where abnormal bone formation occurs within extra-skeletal *** andhypoxia-inducible factor 1α(HIF-1α)activation have been shown to promote ***,the underlying molecular mechanisms bywhich the HIF-1αpathway in mesenchymal progenitor cells(MPCs)contributes to pathologic bone formation remain to ***,we used a proven mouse injury-induced HO model to investigate the role of HIF-1αon aberrant cell ***-cell RNA sequencing(scRNA-seq)and spatial transcriptomics analyses of the HO site,we found that collagen ECM organizationis the most highly up-regulated biological process in *** mesenchymal cell-specific deletion of Hif1α(Hoxa11-CreER^(T2);Hif1a^(fl/fl))significantly mitigated HO in ***-seq analysis of these Hoxa11-CreER^(T2);Hif1a^(fl/fl)mice identified the PLOD2/LOXpathway for collagen cross-linking as downstream of the HIF-1αregulation of ***,our scRNA-seq data and mechanisticstudies further uncovered that glucose metabolism in MPCs is most highly impacted by HIF-1α*** a translational aspect,a pan-LOX inhibitor significantly decreased HO.A newly screened compound revealed that the inhibition of PLOD2 activity in MPCssignificantly decreased osteogenic differentiation and glycolytic *** suggests that the HIF-1α/PLOD2/LOX axis linked tometabolism regulates HO-forming MPC *** results suggest that the HIF-1α/PLOD2/LOX pathway represents a promisingstrategy to mitigate HO formation.

关键词： metabolism skeletal aberrant

Nitrogen mineralization in the oldest climax communities in the eastern Mediterranean region

在线全文

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第1期35卷 213-228页

作者： Fatma Selcen Sakar gürcan güleryüz Department of Biology Section Ecology GörükleGraduate School of Natural and Applied ScienceUniversity of Bursa Uludağ16059 NilüferBursaTurkey Department of Biology Section Ecology GörükleFaculty of Science and ArtsUniversity of Bursa Uludağ16059 NilüferBursaTurkey

In this study,we investigated how tree species affect N mineralization in connection to some soil properties and seconder metabolite levels of litter,in the soil of the old-est native forest *** the oldest pure communi-ties of Pinus nigra(PN),Fagus orientalis(FO),and Abies bornmuelleriana(AB)in the mountain range of Mount Uludağ,Bursa,Turkey,annual net yield and N mineraliza-tion in the 0-5-and 5-20-cm soil layers were determined in a field incubation study over 1 *** locations were chosen from 1300 to 1600 m a.s.l.,and moisture content(%),pH,water-holding capacity(%),organic C,total N,and C/N ratio,and annual net mineral N yield of the soil and hydro-lyzed tannic acid and total phenolic compounds in litter were compared for these forest *** had the highest annual net Nmin yield(43.9±4.8 kg ha^(-1) a^(-1)),*** the lowest(30.5±4.2 kg ha^(-1) a^(-1)).Our findings show that in the oldest forest ecosystems,the seasonal soil moisture content and tree species play an essential role in N cycling and that hydrolyzed tannic acids and total phenolic compounds effectively control N *** acid and total phenolics in the litter were found to inhibit nitrification,but total phenolics were found to stimulate ammonification.

关键词： Oldest forest communities Nitrogen mineralization Nitrification Tannic acid Total phenolic Litter