检索结果-南通市图书馆

Crack propagation and damage evolution of metallic cylindrical shells under internal explosive loading

Defence Technology（防务技术） 2024年第9期39卷 133-146页

作者： Yusong luo Weibing li Junbao li Wenbin li Xiaoming Wang ZNDY of Ministerial Key laboratory Nanjing University of Science and TechnologyNanjing210094China

This paper investigates the three-dimensional crack propagation and damage evolution process of metallic column shells under internal explosive *** calibration of four typical failure parameters for 40CrMnSiB steel was conducted through experiments and subsequently applied to *** numerical simulation results employing the four failure criteria were compared with the differences and similarities observed in freeze-recovery tests and ultra-high-speed *** analysis addressed the critical issue of determining failure criteria for the fracture of a metal shell under internal explosive *** upon this foundation,the damage parameter D_(c),linked to the cumulative crack density,was defined based on the evolution characteristics of a substantial number of *** relationship between the damage parameter and crack velocity over time was established,and the influence of the internal central pressure on the damage parameter and crack velocity was *** in the fracture modes were found under different failure criteria,with the principal strain failure criterion proving to be the most effective for simulating 3D crack propagation in a pure shear fracture *** statistical analysis of the shell penetration fracture radius data,it was determined that the fracture radius remained essentially constant during the crack evolution process and could be considered a *** propagation velocity of axial cracks ranged between 5300 m/s and 12600 m/s,surpassing the Rayleigh wave velocity of the shell material and decreasing linearly with *** increase in shell damage exhibited an initial rapid phase,followed by deceleration,demonstrating accelerated damage during the propagation stage of the blast wave and decelerated damage after the arrival of the rarefaction *** study provides an effective approach for investigating crack propagation and damage *** derived crack propagation and damage evolution law s

关键词： Internal explosive loading Failure criterion Crack propagation Damage evolution Freeze-recovery test

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nonsingularity of grain-like cascade feedback shift registers subject to fault attacks

引用

Science China(Information Sciences) 2024年第9期67卷 184-195页

作者： Haitao li Zhaoqi liU Wenrong li School of Mathematics and Statistics Shandong Normal University

Feedback shift registers(FSRs) are pivotal in generating pseudorandom sequences for stream ciphers and play a crucial role in error detection and code correction. This paper investigates the resilience of grain-like cascade FSRs(glC-FSRs) against two types of fault attacks: hard and soft. First, we introduce a new criterion for assessing the nonsingularity of glC-FSRs using the structure matrices of feedback functions,which enable the measurement of the number of nonsingular glC-FSRs. Second, we demonstrate that glC-FSRs subject to hard fault attacks become singular as determined by this new criterion. Ultimately,by constructing a soft fault bit set, we discuss the resilience of glC-FSRs to soft fault attacks. Results demonstrate that singular glC-FSRs remain singular after being injected by soft fault attacks. Conversely,for nonsingular glC-FSRs, suitable soft fault attacks are designed to maintain their nonsingular status.

关键词： grain-like cascade feedback shift register fault attack nonsingularity semi-tensor product

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

MCS-based quantile value approach for reliability-based design of tunnel face support pressure

引用

Underground Space 2024年第5期18卷 187-198页

作者： Bin li Changxing Wang Hong li Department of Road and Bridge Engineering School of Transportation and Logistics EngineeringWuhan University of TechnologyWuhan 430063China Hubei Highway Engineering Research Center Wuhan 430063China

This paper develops a new approach for reliability-based design(RBD)of tunnel face support pressure from a quantile value perspective.A surrogate model is constructed to calculate the collapse pressures of the random samples generated by a single run of Monte Carlo simulation(MCS).The cumulative distribution function(CDF)of the collapse pressure is then obtained and the support pressure aiming at a target failure probability is chosen as the upper quantile value of the collapse *** proposed approach does not require repetitive reliability analyses compared to the existing ***,a direct relationship between the target failure probability and the required support pressure is *** illustrative example is used to demonstrate the implementation *** accuracy of the reliability-based support pressures is verified by direct MCS incorporating with three-dimensional numerical ***,the influencing factors,including the sample size of MCS,the correlation coefficient between random variables,the choice of experimental points,and the surrogate model,are *** method can play a complementary role to available approaches due to its advantages of simplicity and efficiency.

关键词： Tunnel face stability Support pressure Reliability-based design Response surface method Monte Carlo simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Cr_(2)O_(3) on properties of CaO-SiO_(2)-Fe_(t)O-MgO system and dissolution behavior of lime

引用

Journal of Iron and Steel Research International 2024年第4期31卷 870-881页

作者： Shan-nan li Jian-li li Yue Yu Hang-yu Zhu The State Key laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The productivity of the chrome-containing semi-steel converter smelting process is directly affected by the slag-forming speed during the converter preliminary *** effects of Cr_(2)O_(3) content on the physicochemical properties of the CaO-SiO_(2)-Fe_(t)O-MgO system,such as melting temperature,solidification behavior,mineral composition,and lime dissolution rate,were *** results showed that the slag was an amorphous phase at 1500℃.When Cr_(2)O_(3) was added,Ca(Fe,Mg)Si_(2)O_(6) and spinel were formed in the *** the increase in Cr_(2)O_(3) content,the amount of spinel precipitation increased,and the dendritic FegO_(4) crystal gradually changed into the granular(Fe,Mg)(Fe,Cr)2O_(4) *** the Cr_(2)O_(3) content increased from O to 2.91 wt.%,the melting temperature of the slag rose,and the melting range of the slag expanded slightly,but the lime dissolution rate did not *** the Cr_(2)O_(3) content further increased to 9.09 wt.%,the melting temperature continued to rise,the melting range rapidly expanded,and the lime dissolution rate decreased.

关键词： Cr_(2)O_(3) Vanadium-titanium magnetite Converter Slag lime dissolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Holographic superfluid ring with a weak link

引用

Science China(Physics,Mechanics & Astronomy) 2024年第11期67卷 29-38页

作者： Zhi-Hong li Huai-Fan li Department of Physics Shanxi Datong UniversityDatong 037009China Institute of Theoretical Physics Shanxi Datong UniversityDatong 037009China

We explore the generation of topological defects in the course of a dynamical phase transition in a ring with a weak link, i.e., a SSS Josephson junction, from the AdS/CFT correspondence. By setting different parameters of the junction(width, steepness,depth) and the final temperature of the quench, the configurations of the charge density and condensate of the order parameters of the dual field theory are presented. Meanwhile, we observe that in the final equilibrium state, variations in parameters of the junctions only affect the configurations of the charge density and condensate of the order parameters, without altering their values outside the junction. However, variations in the final temperature will directly affect the values of the charge density and condensate of the order parameters outside of the junction. Moreover, in the final equilibrium state, we propose an analytic relation between the gauge-invariant velocity in the two superconducting states in the SSS Josephson junction, which agrees well with the numerical results.

关键词： AdS/CFT correspondence holographic superfluid holographic Josephson junction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Harboring CAR-T cells using an injectable scaffold to treat solid tumors

引用

National Science Review 2024年第5期11卷 91-92页

作者： li Tang Institute of Bioengineering (IBI) école polytechnique fédérale de Lausanne (EPFL)

genetic expression of chimeric antigen receptors (CAR) enables T cells to target and kill cancer cells in an MHCindependent manner, resulting in a potent antitumor response [1]. To date, more than 10 CAR-T cell products have been approved globally for the treatment of hematologic disorders such as relapsed/refractory B-cell acute lymphoblastic leukemia, non-Hodgkin lymphoma, and multiple myeloma [2,3].

关键词： IMMUNOTHERAPY CANCER

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Fast efficient photon deceleration in plasmas by using two laser pulses at different frequencies

引用

Matter and Radiation at Extremes 2024年第3期9卷 11-18页

作者： Y.X.Wang X.l.Zhu S.M.Weng P.li X.F.li H.Ai H.R.Pan Z.M.Sheng Key laboratory for laser Plasmas(moe) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghai 200240China Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghai 200240China Research Center of laser Fusion of China Academy of Engineering Physics MianyangSichuan 621900China State key laboratory of High Field laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Tsung-dao lee Institute Shanghai Jiao Tong UniversityShanghai 200240China

The generation of ultrashort high-power light sources in the mid-infrared(mid-IR)to terahertz(THz)range is of interest for applications in a number of fields,from fundamental research to biology and *** conventional laser technology,photon deceleration in plasma wakes provides an alternative approach to the generation of ultrashort mid-IR or THz ***,we present a photon deceleration scheme for the efficient generation of ultrashort mid-IR or THz pulses by using an intense driver laser pulse with a relatively short wavelength and a signal laser pulse with a relatively long *** signal pulse trails the driver pulse with an appropriate time delay such that it sits at the front of the second wake bubble that is driven by the driver *** to its relatively long wavelength,the signal pulse will be subjected to a large gradient of the refractive index in the plasma wake ***,the photon deceleration in the plasma wake becomes faster and more efficient for signal pulses with longer *** greatly enhances the capacity and efficiency of photon deceleration in the generation of ultrashort high-power light sources in the long-wavelength IR and THz spectral ranges.

关键词： laser ultrashort photon

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Additives strategies to improving cycling stability of li metal batteries by modifying electrode electrolyte interphases

引用

Progress in Natural Science:Materials International 2024年第2期34卷 338-344页

作者： Yuan li Pengfei Huang Chunyu Cui Xiaoyuan Ma li Chen Zekun li linhai li Yuhong Tian School of Biological and Chemical Engineering Guangxi University of Science and Technology School of College of Chemistry and Chemical Engineering Hunan University Isky Future Energy Institute

li metal batteries（lMBs） have attracted much attention due to the ultra-high theoretical capacity of the li metal anode（lMA）.However,the uncontrollable dendrites growth and low coulombic efficiency hinder their practical ***,we explore 3,5-difluoropyridine（2F-BD） as a novel electrolyte additive to enable highperformance *** 2F-BD additive participates in and modifies the solvation structure of li ions by reducing the coordinated number of PF6-at the electrode surface,leading to the formation of a liF and li3N-rich solid electrolyte interphase（SEI）.The liF component increases the robustness of SEI and suppresses the formation of li dendrites,while the li3N component facilitates the transportation and reaction kinetics of li *** a result,the li‖li symmetric cell presents a stable cycling performance of up to 500 h at a current density of 1 mA *** coupling with liFePO4cathode,the obtained full cell achieves high specific capacities of 106.06 mA h g-1and 84.98 mA h g-1at 2.55 mA cm-2and 5.10 mA cm-2,respectively,and maintains a high capacity retention of84.0% after 1000 cycles at 0.13 mA cm-2,with an average cycling CE of 99.58%.

关键词： li metal batteries li dendrites Electrolyte additive

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Erosion Characteristics of Oil-immersed On-load Tap Changer Contacts Under Varying Contact Speeds and Pressures

引用

Chinese Journal of Electrical Engineering 2024年第1期10卷 21-34页

作者： Zongying li Shuaibing li Yongqiang Kang Zheng li Hongwei li School of New Energy and Power Engineering Lanzhou Jiaotong UniversityLanzhou 730070China School of Electrical Engineering Southwest Jiaotong UniversityChengdu 611756China School of Automation and Electrical Engineering Lanzhou Jiaotong UniversityLanzhou 730070China

With the growing demand for precise voltage adjustment and reactive regulation,the frequent operation of on-load tap changers(OlTCs)in oil-immersed systems has led to increased erosion of switch contacts by arcs during the switching *** erosion causes significant wear on the contacts,thereby reducing their ***,the present study aims to investigate the behavior and mechanism of arc erosion on contact surfaces in oil-immersed *** achieve this,a self-designed friction and wear test device for OlTC contacts was utilized to conduct experiments at various sliding speeds and contact ***,finite element analysis was employed to validate the experimental results regarding the influence of sliding speed on arc *** surface morphology of the contacts was observed using an optical *** findings revealed that as the sliding speed increased,the arc energy,arc initiation rate,and contact resistance initially exhibited an upward trend,then decreased,and eventually increased *** minimum values were observed at a sliding speed of 90 mm/***,the arc energy,arc initiation rate,and contact resistance decreased gradually as the contact pressure *** reaching a contact pressure of 1.5 N,the variation in the arc energy *** lower contact pressures,arc erosion dominated the wear on the contact ***,at higher contact pressures,the wear transitioned from predominantly arc erosion to a combination of mechanical wear and arc *** summary,experimental and analytical investigations provided insights into the effects of sliding speed and contact pressure on the behavior of arc erosion,contact resistance,and surface damage of OlTC contacts in oil-immersed systems.

关键词： Oil-immersed on-load tap changer arc energy contact resistance friction and wear arc erosion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nanoscale Zero-Valent Iron(nZVI)for Heavy Metal Wastewater Treatment:A Perspective

引用

Engineering 2024年第5期36卷 16-20页

作者： Shaolin li lei li Weixian Zhang State Key laboratory for Pollution Control and Resource Reuse College of Environmental Science and EngineeringTongji UniversityShanghai 200092China Shanghai Institute of Pollution Control and Ecological Security Shanghai 200092China

Industries such as non-ferrous metal smelting discharge billions of gallons of highly toxic heavy metal wastewater(HMW)worldwide annually,posing a severe challenge to conventional wastewater treatment plants and harming the *** is traditionally treated via chemical precipitation using lime,caustic,or sulfide,but the effluents do not meet the increasingly stringent discharge *** issue has spurred an increase in research and the development of innovative treatment technologies,among which those using nanoparticles receive particular *** such initiatives,treatment using nanoscale zero-valent iron(nZVI)is one of the best *** nZVI is already well known for its site-remediation use,this perspective highlights its application in HMW treatment with metal *** demonstrate several advantages of nZVI in this wastewater application,including its multifunctionality in sequestrating a wide array of metal(loid)s(>30 species);its capability to capture and enrich metal(loid)s at low concentrations(with a removal capacity reaching 500 mg·g^(-1)nZVI);and its operational convenience due to its unique *** these advantages are attributable to nZVI’s diminutive nanoparticle size and/or its unique iron *** also present the first engineering practice of this application,which has treated millions of cubic meters of HMW and recovered tons of valuable metals(e.g.,Cu and Au).It is concluded that nZVI is a potent reagent for treating HMW and that nZVI technology provides an eco-solution to this toxic waste.

关键词： Nanoscale zero-valent iron Wastewater Heavy metal Resource recovery

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：