检索结果-南通市图书馆

Microstructure and mechanical properties of double-side friction stir welded 6082Al ultra-thick plates

Journal of materials Science & Technology 2020年第6期41卷 105-116页

作者： C.Yang J.F.Zhang g.n.ma L.H.Wu X.M.Zhang g.Z.He P.Xue D.R.ni B.L.Xiao K.S.Wang Z.Y.ma Shenyang national Laboratory for materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China CRRC Changchun Railway Vehicles Co. Ltd.Changchun 130062China School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China

In the present work,80 mm thick 6082Al alloy plates were successfully double-side welded by friction stir welding(FSW).The relationship between the microstructures and mechanical properties was built for the double-side FSW butt joint with more attention paid to the local characteristic *** was shown that a phenomenon of microstructural inhomogeneity existed in the nugget zone(nZ)through the thickness *** grain size presented an obvious gradient distribution from the top to the bottom for each single-pass weld,and the microhardness values decreased from both surfaces to the middle of the *** lowest hardness zone(LHZ)exhibited a"hyperbolical"-shaped distribution extending to the middle of the *** tensile properties were obtained in the three sliced specimens of the FSW joint,and the joint coefficient reached about 70%which achieved the same level as the conventional FSW Al alloy *** element modeling proved that the"hyperbolical"-shaped heat affected zone(HAZ)was beneficial to resisting the strain concentration in the middle layer specimen which helped to increase the tensile *** on the analysis of the hardness contour map,tensile property and microstructural evolution of the joints,an Isothermal Softening Layer(ISL)model was proposed and established,which may have a helpful guidance for the optimization on the FSW of ultra-thick Al alloy plates.

关键词： Ultra-thick aluminum alloy plates Double-side friction stir welding Finite element model Microstructural inhomogeneity Mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent developments in three-dimensional Zn metal anodes for battery applications

引用

Infomat 2024年第1期6卷 1-30页

作者： Jianyu Chen Yizhou Wang Zhengnan Tian Jin Zhao Yanwen ma Husam n.Alshareef State Key Laboratory of Organic Electronics and Information Displays(KLOEID)and Jiangsu Key Laboratory for Biosensors Institute of Advanced Materials(IAM)Nanjing University of Posts&Telecommunications(NUPT)Nanjingthe People's Republic of China materials Science and Engineering King Abdullah University of Science and Technology(KAUST)ThuwalSaudi Arabia Suzhou Vocational Institute of Industrial Technology Suzhouthe People's Republic of China

Aqueous zinc(Zn)ion batteries(AZIBs)are regarded as one of the promising candidates for next-generation electrochemical energy storage systems due to their low cost,high safety,and environmental ***,the commercialization of AZIBs has been severely restricted by the growth of dendrite at the Zn metal *** the planar-structured Zn anodes into threedimensional(3D)structures has proven to be an effective way to modulate the plating/stripping behavior of Zn anodes,resulting in the suppression of dendrite *** review provides an up-to-date review of 3D structured Zn metal anodes,including working principles,design,current status,and future *** aim to give the readers a comprehensive understanding of 3D-structured Zn anodes and their effective usage to enhance AZIB performance.

关键词： 3D metal anodes aqueous Zn ion batteries dendrite suppression Zn dendrite Zn metal anodes

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

VOC emitted by biopharmaceutical industries:Source profiles,health risks,and secondary pollution

引用

Journal of Environmental Sciences 2024年第1期135卷 570-584页

作者： Jiawei ma Lin Li State Key Laboratory of Environmental Aquatic Chemistry Research Center for Eco-Environmental SciencesChinese Academy of SciencesBeijing 100085China University of Chinese Academy of Sciences Beijing 100049China national Engineering Laboratory for VOCs Pollution Control material&Technology University of Chinese Academy of SciencesBeijing 101408China

The biopharmaceutical industry contributes substantially to volatile organic compounds(VOCs)emissions,causing growing concerns and social developmental *** study conducted an on-site investigation of the process-based emission of VOCs from three biopharmaceutical *** the workshops of the three enterprises,26 VOCs were detected,which could be sorted into 4 classes:hydrocarbons,aromatic hydrocarbons,oxygen-containing compounds,and nitrogen-containing *** were the main components of waste gases,accounting for 44.13%-77.85%of the overall ***-based source profiles were compiled for each process unit,with the fermentation and extraction units of tiamulin fumarate being the main source of VOC *** heptanone,vinyl acetate,diethylamine,propylene glycol methyl ether(PgME),and benzene were screened as priority pollutants through a fuzzy comprehensive evaluation *** level concentration simulation results of the gauss plume diffusion model demonstrated that the diffusivity of VOCs in the atmosphere was relatively high,indicating potential non-carcinogenic and carcinogenic risks 1.5-2 km ***,the process-based formation potentials of ozone and secondary organic aerosols(SOAs)were determined and indicated that n-methyl-2-pyrrolidone,dimethyl heptanone,and PgME should be preferentially controlled to reduce the ozone formation potential,whereas the control of benzene and chlorobenzene should be prioritized to reduce the generation of *** results provide a basis for understanding the characteristics of VOC emission by biopharmaceutical industries and their diffusion,potentially allowing the development of measures to reduce health risks and secondary pollution.

关键词： Biopharmaceutical Volatile organic compound Priority pollutant Exposure risk Secondary pollution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Flat Zn deposition at battery anode via an ultrathin robust interlayer

引用

nano Research 2024年第9期17卷 8104-8111页

作者： Yizhou Wang Jianyu Chen Zibo Chen Qian He Zhengnan Tian Jin Zhao Yanwen ma Husam n.Alshareef materials Science and Engineering King Abdullah University of Science and Technology(KAUST)Thuwal 23955-6900Saudi Arabia State Key Laboratory of Organic Electronics and Information Displays(KLOEID)and Jiangsu Key Laboratory for Biosensors Institute of Advanced Materials(IAM)Nanjing University of Posts and TelecommunicationsNanjing 210023China Suzhou Vocational Institute of Industrial Technology Suzhou 215104China

Rechargeable aqueous zinc(Zn)ion batteries(AZIBs)using low-cost and safe Zn metal anodes are considered promising candidates for future grid-scale energy storage systems,but the Zn dendrite problem severely hinders the further prospects of *** Zn depositing behaviors toward horizontal alignment is highly effective and thus has received huge ***,such a strategy is usually based on previous substrate engineering,which requires complex preparation or expensive ***,it is essential to develop a novel solution that can realize horizontally aligned Zn flake deposition via easy operation and low ***,we report an ultrathin and robust Kevlar membrane as the interlayer to mechanically suppress Zn dendrite *** to the randomly distributed flaky dendrites in the control group,the deposited Zn sheets would grow into parallel alignment with the existence of such *** the dendrites are effectively suppressed,Zn||Cu asymmetric,Zn||Zn symmetric,and Zn||MnO_(2)full batteries using Kevlar interlayer deliver significantly improved cycling ***,the Zn||MnO_(2)pouch cell using a Kevlar interlayer delivers stable cycling performance and shows stable operation during multi-angle *** believe this work provides a new possibility for regulating Zn deposition from a crystallographic perspective.

关键词： Zn metal anodes Zn dendrites aqueous Zn ion batteries dendrite suppression (002)crystal plane

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enhancing capacitive deionization performance and cyclic stability of nitrogen-doped activated carbon by the electro-oxidation of anode materials

引用

Chinese Journal of Chemical Engineering 2024年第5期69卷 23-33页

作者： Xiaona Liu Baohua Zhao Yanyun Hu Luyue Huang Jingxiang ma Shuqiao Xu Zhonglin Xia Xiaoying ma Shuangchen ma School of Environmental Science and Engineering North China Electric Power UniversityBaoding 071003China Huadian Zhengzhou machinery Design and Research Institute Co. LtdZhengzhou 450002China Huadian Inner Mongolia Energy Co. Ltd.Baotou Power Generation BranchBaotou 014013China

Electrode materials with high desalination capacity and long-term cyclic stability are the focus of capacitive deionization(CDI) community. Understanding the causes of performance decay in traditional carbons is crucial to design a high-performance material. Based on this, here, nitrogen-doped activated carbon(nAC) was prepared by pyrolyzing the blend of activated carbon powder(ACP) and melamine for the positive electrode of asymmetric CDI. By comparing the indicators changes such as conductivity, salt adsorption capacity, pH, and charge efficiency of the symmetrical ACP-ACP device to the asymmetric ACP-nAC device under different CDI cycles, as well as the changes of the electrochemical properties of anode and cathode materials after long-term operation, the reasons for the decline of the stability of the CDI performance were revealed. It was found that the carboxyl functional groups generated by the electro-oxidation of anode carbon materials make the anode zero-charge potential(E_(pzc)) shift positively,which results in the uneven distribution of potential windows of CDI units and affects the adsorption capacity. Furthermore, by understanding the electron density on C atoms surrounding the n atoms, we attribute the increased cyclic stability to the enhanced negativity of the charge of carbon atoms adjacent to quaternary-n and pyridinic-oxide-n.

关键词： Anodic oxidation Capacitive deionization Cyclic stability n-doping

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bioinspired nanomaterials for the treatment of bacterial infections

引用

nano Research 2024年第2期17卷 691-714页

作者： Xiaojing ma Wenjing Tang Rong Yang Robert F.Smith School of Chemical&Biomolecular Engineering Cornell UniversityIthacaNY 14853USA

Infectious diseases pose a serious threat to global *** immunizations can control most viral infections,bacterial infections,particularly those caused by drug-resistant strains,continue to cause high rates of illness and ***,the creation of new antibiotics has come to a grinding halt in the last ten *** response to this crisis,nanotechnology has emerged as a hopeful solution to tackle drug resistance and enhance treatment results.A large variety of biomimetic nanomaterials,termed nanozymes,have demonstrated strong antimicrobial *** the inherent toxicity of nanomaterials is a concern,recent studies have harnessed the stimuli-responsiveness of nanomaterials to enable local and/or targeted delivery to reduce the treatment side ***,the physicochemical versatility of nanomaterials affords many degrees of freedom that enable rational design of smart or autonomous therapeutics,which cannot be achieved using conventional *** design straddles the fields of catalysis,nanoscience,microbiology,and translational *** provide an overview of this interdisciplinary landscape,this review is organized based on composition into lipid,metal,metal oxide,and non-metallic *** as a delivery vehicle enhance bioavailability and reduce ***-and metal oxide-based nanomaterials inhibit bacterial growth by mimicking natural enzymatic activities such as peroxidase(POD)and ***,carbon-,polymer-,and cell membrane-based nanomaterials are combined into a discussion on non-metallic *** the end of this review,potentially fruitful directions for future bioinspired nanomaterials in infectious disease treatment are included.

关键词： bioinspired nanomaterial bacteria infectious disease antimicrobial liposome nanozyme

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Measuring Financial Systemic Risk:net Liability Clearing Mechanism and Contagion Effect

引用

Journal of Systems Science & Complexity 2024年第3期37卷 1114-1146页

作者： ma Jiali ZHU Shushang LI Duan College of Big Data Statistics Guizhou University of Finance and EconomicsGuiyang 550025China School of Business Sun Yat-Sen UniversityGuangzhou 510275China School of Data Science City University of Hong KongHong Kong 999077China

Following the framework of E-n model(Eisenberg and noe,2001),the authors consider a new clearing mechanism based on net liabilities among financial institutions since the liabilities between the counterparties should be deducted accordingly when clearing in *** the basis for systemic risk measurement,similar to the original E-n model,the authors first establish some good properties for the clearing payment vector according to a more general ***,the authors investigate how risk spreads among institutions through the liability network forming the risk contagion ***,the authors illustrate with a specific example that the original E-n clearing mechanism may misidentify the systemic important institutions,and theoretically show that it may also overestimate the risk compared with the netting clearing mechanism.

关键词： Clearing mechanism contagion net liability network systemic risk

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Photoinduced superlubricity on TiO_(2) surfaces

引用

Friction 2024年第3期12卷 428-438页

作者： Ke HAn Liran ma Yu TIAn Jianbin LUO State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing 100084China Received:16 September 2022/Revised:28 October 2022/Accepted:27 December 2022The author(s)2022.

Superlubricity control is of great interest in both industry and scientific research,and several methods have been proposed to achieve this *** this work,ultraviolet(UV)light was introduced into titanium dioxide(TiO_(2))and silicon nitride(Si_(3)n_(4))tribosystems to accomplish photoinduced *** friction coefficients(COFs)between Si_(3)n_(4) balls and TiO_(2) plates in the mixtures of sulfuric acid(H^(2)SO_(4))solution and glycerol solution were obviously reduced,and the system entered the superlubricity region(COFnation at a speed of 56 mm/***,the COF was much larger without UV treatment than that with UV *** formation of silica(SiO_(2))layers on the surfaces of Si_(3)n_(4) balls and the elastohydrodynamic effects were determined to be fundamental to the low friction in this experiment,and the enhancement of the combination between the TiO_(2) surface and the hydroxy group of glycerol by UV illumination was the key to the photoinduced superlubricity in this *** findings showed one method for achieving superlubricity by introducing a light field that could be further applied to special working conditions.

关键词： light control friction superlubricity glycerol titanium dioxide(TiO_(2))

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Wearable multilead ECg sensing systems using on-skin stretchable and breathable dry adhesives

引用

Bio-Design and manufacturing 2024年第2期7卷 167-180页

作者： Yingxi Xie Longsheng Lu Wentao Wang Huan ma School of Mechanical and Automotive Engineering South China University of TechnologyGuangzhou 510641China College of Automotive and Mechanical Engineering Changsha University of Science and TechnologyChangsha 410114China guangdong Cardiovascular Institute Guangdong Provincial People’s HospitalGuangzhou 510080China

Electrocardiogram(ECg)monitoring is used to diagnose cardiovascular diseases,for which wearable electronics have attracted much attention due to their lightweight,comfort,and long-term *** study developed a wearablemultilead ECg sensing system with on-skin stretchable and conductive silver(Ag)-coated fiber/silicone(AgCF-S)dry *** and normal adhesion to pigskin(0.43 and 0.20 n/cm2,respectively)was optimized by the active control of fiber density and mixing ratio,resulting in close contact in the electrode–skin *** breathableAgCF-S dry electrodewas nonallergenic after continuous fit for 24 h and can be reused/cleaned(>100 times)without loss of *** AgCF encapsulated inside silicone elastomers was overlapped to construct a dynamic network under repeated stretching(10%strain)and bending(90°)deformations,enabling small intrinsic impedance(0.3,0.1 Hz)and contact impedance variation(0.7 k)in high-frequency vibration(70 Hz).All hard/soft modules of the multilead ECg system were integrated into lightweight clothing and equipped with wireless transmission for signal *** synchronous acquisition of I–III,aVR,aVL,aVF,and V4 lead data,the multilead ECg sensing system was suitable for various scenarios,such as exercise,rest,and sleep,with extremely high signal-to-noise ratios.

关键词： Multilead electrocardiogram Dry electrodes Wearable electronics Wireless transmission

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Random Raman Fiber Laser as a Liquid Refractive Index Sensor

引用

Photonic Sensors 2024年第1期14卷 13-22页

作者： Bing HAn Yuxi ma Han WU Yong ZHAO College of Information Science and Engineering Northeastern UniversityShenyang 110819China Hebei Key Laboratory of Micro-nano Precision Optical Sensing and Measurement Technology Qinhuangdao 066004China College of Electronics and Information Engineering Sichuan UniversityChengdu 610064China

In this paper,a new concept of forward-pumped random Raman fiber laser(RRFL)-based liquid refractive index sensing is proposed for the first *** liquid refractive index sensing,the flat fiber end immersed in the liquid can act as the point reflector for generating random fiber lasing and also as the sensing *** to the high sensitivity of the output power of the RRFL to the reflectivity provided by the point reflector in the ultralow reflectivity regime,the proposed RRFL is capable of achieving liquid refractive index sensing by measuring the random lasing output *** theoretically investigate the effects of the operating pump power and fiber length on the refractive index sensitivity for the proposed *** a proof-of-concept demonstration,we experimentally realize high-sensitivity half-open short-cavity RRFL-based liquid refractive index sensing with the maximum sensitivity and the sensing resolution of-39.88W/RIU and 2.5075×10^(-5) RIU,*** also experimentally verify that the refractive index sensitivity can be enhanced with the shorter fiber length of the *** work extends the application of the random fiber laser as a new platform for highly-sensitive refractive index sensing in chemical,biomedical,and environmental monitoring applications,etc.

关键词： Fiber optic sensors refractive index measurements fiber lasers Rayleigh scattering stimulated Raman scattering

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：