检索结果-南通市图书馆

Influence of curing conditions on the shrinkage behavior of three-dimensional printed concrete formwork

Frontiers of Structural and Civil Engineering 2024年第8期18卷 1225-1236页

作者： M.BEKAERT K.van TITTELBOOM g.de SCHUTTER Magnel-Vandepitte Laboratory for structural Engineering and Building Materials Department of Structural Engineering and Building MaterialsFaculty of Engineering and ArchitectureGhent UniversityGhent 60 B-9052Belgium

The use of three-dimensional(3D)printed concrete as formwork is becoming more widely applied within the ***,the technology is still not optimized and there are many reports of preliminary cracking during the curing of cast *** is believed to result from differential shrinkage between the printed and cast *** cracks(in the printed concrete or at the interface between the infill and printed concrete)form a preferential path for aggressive substances and can reduce the durability of the combined concrete *** ensure the desired service life of the structure,it is important that the differential shrinkage between cast and printed concrete is *** study investigated the effect of curing conditions on the differential shrinkage behavior of 3D and cast *** influence of prewetting of the dry-cured 3D printed formwork was also *** the experimental program,a vibrated and self-compacting concrete were used as cast *** 3D printed formwork was produced and combined with cast concrete to simulate a concrete *** formwork was cured for 1,7,or 28 d exposed to the air(relative humidity:60%or 95%)or submerged in *** length change of the combined elements was observed over 56 d after concrete casting and throughout the thickness of the *** show that increasing the curing period in dry conditions of the printed concrete leads to an expansion of the formwork on the first day after *** expansion leads to a non-uniform strain evolution throughout the curing period of the combined *** concrete formwork stored in wet conditions does not expand after the casting process but tends to show a decreasing linear deformation within the whole elements.

关键词： 3D concrete printing formwork shrinkage curing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Targeting epidermal growth factor receptor signaling to facilitate cortical injury repair?

引用

Neural Regeneration Research 2024年第5期19卷 935-936页

作者： Ricardo gómez-Oliva Pedro Nunez-Abades Carmen Castro Área de Fisiología Facultad de Medicina Universidad de CádizCadizSpain Instituto de Investigación e Innovación en Biomedicina de Cádiz CadizSpain Departamento de Fisiología Facultad de FarmaciaUniversidad de SevillaSevilleSpain

The existence of neural stem cells(NSC)in specific areas of the adult mammalian brain leads to the generation of new neurons involved in homeostatic *** is the case of the NSC of the subventricular zone(SVZ)that produces olfactory bulb(OB)*** neurons integrate into circuits to modulate sensory information and participate in olfactory processing(Bragado Alonso et al.,2019).A series of hierarchical events need to take place to produce OB neurons from NSC of the ***,the activation of quiescent NSC is necessary to produce intermediate transit amplifying progenitors(TAP),which will generate *** latter are cells that maintain a proliferative phenotype while in an immature ***,once they initiate migration toward the OB,they progressively undergo their differentiation into neurons(Kjell et al.,2020).

关键词： ventricular maintain

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Review: update on performance assessment and monitoring systems for ophthalmologists

引用

Annals of Eye Science 2024年第1期9卷 24-33页

作者： Heather g.Mack Centre for Eye Research Australia University of MelbourneMelbourneAustralia

Performance assessment and monitoring systems are the process by which ophthalmologists demonstrate they are fit to continue *** is the process by which licensed doctors are legally required to demonstrate to medical regulators that they are up to date and fit to practice in order to maintain their medical license,and began in the United Kingdom(UK)in 2012 following well-publicized *** is a different process which began in North America and demonstrates doctors have maintained competence,without involvement of external *** for and against the concept of performance assessment are *** in performance assessment,whether part of the process or not,are doctors themselves,peers and other health care providers,patients,hospitals and health systems,medical regulators,and health policy *** models of performance assessment included portfolios,credit accumulation,and closed-book *** are in evolution with the value of formative rather than summative assessments,and the need for methods of assessing procedural competency increasingly *** methods of performance assessment of practicing ophthalmologists include use of performance indicators,simulation,and workplace-based *** methods of assuring the public by improved detection of outliers are *** weak evidence supporting performance assessments in demonstrating continuing competency to practice,the process is gradually being accepted *** research into optimum methods of performance assessment and monitoring processes is required,along with cost-benefit analysis.

关键词： Performance assessment revalidation recertification maintenance of competency relicensure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

引用

Applied Mathematics and Mechanics(English Edition) 2024年第1期45卷 197-216页

作者： C.g.PAVITHRA B.J.gIREESHA M.L.KEERTHI Department of Pg Studies and Research in Mathematics Kuvempu UniversityShankaraghatta 577451India Department of Mathematics and Statistics M.S.Ramaiah University of Applied SciencesBengaluru 560058India

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTM) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

关键词： convection radiation moving longitudinal fin Adomian decomposition Sumudu transform method(ADSTM) trihybrid nanofluid magnetic field

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pressurized environments directly influence friction and wear of dry steel contacts—Investigations in a novel high fluid pressure tribometer

引用

Friction 2024年第7期12卷 1599-1617页

作者： Paul REICHLE Jakob BARZ georg UMLAUF günter E.M.TOVAR Institute of Interfacial Process Engineering and Plasma Technology(IgVP) University of StuttgartStuttgart 70569Germany Fraunhofer Institute for Interfacial Engineering and Biotechnology(IgB) Stuttgart 70569Germany

To reduce the usage of classical lubricants in deep drawing,a new tribological system based on volatile lubricants was ***,a volatile medium is injected under high pressure into the interstice between drawing tool and sheet *** on temperature and pressure,the temporary lubricant may exist in its gaseous or liquid *** this study,a novel high fluid pressure tribometer was designed to investigate the friction and wear of dry steel contacts under comparable conditions like in dry deep ***,a new ball-on-disc tribometer was designed and integrated into a high-pressure *** specifically investigate the effects of different environments(technical air,liquid and gaseous carbon dioxide,nitrogen,argon)at atmospheric and high pressure(0.1 MPa,6 MPa)on tribology,the specimens and all components were operating *** the experiments,the friction was measured *** show that the highest friction occurs in air and the lowest in carbon dioxide *** to the experiments,the wear of the specimens was assessed along with changes in surface chemistry related to tribochemical ***,the tribology of the dry sliding contacts is correlated to changes of the surface *** differences as well as similarities regarding the different fluid environments are *** the results show,the differences between the media used are most pronounced at elevated ***,this work gives clear indications on the suitability of volatile lubricants in dry friction or rather gas lubrication,especially for dry deep drawing.

关键词： dry friction and dry wear gas lubrication carbon dioxide tribo-layer dry metal forming

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Periodontitis:An often-neglected complication of diabetes

引用

World Journal of Diabetes 2024年第3期15卷 318-325页

作者： Marina g Kudiyirickal Joseph M Pappachan Primary Care Dental Practice The Smile ClinicPreston PR16PZUnited Kingdom Department of Endocrinology and Metabolism Lancashire Teaching Hospitals NHS TrustPreston PR29HTUnited Kingdom Faculty of Science Manchester Metropolitan UniversityManchester M156BHUnited Kingdom Faculty of Biology Medicine and HealthThe University of ManchesterManchester M139PLUnited Kingdom

The bidirectional association between type 2 diabetes mellitus(T2DM)and periodontitis is now well established,resulting in periodontal disease being considered as the 6th major complication of diabetes mellitus(DM)after cardiovascular disease,eye disease,neuropathy,nephropathy,and peripheral vascular *** can worsen the virulence and invasiveness of pathogenic oral microbial flora aggravating the local inflammation and infection in those with periodontal *** the other hand,the chemical and immunological mediators released into the circulation as part of periodontal inflammation worsen the systemic insulin resistance with worsening of *** if undiagnosed or left untreated can also result in eventual tooth loss.A study by Xu et al in the World Journal of Diabetes examined the predictive factors associated with periodontitis in Chinese patients with *** prevalence of periodontitis was found to be 75.7%in this *** on logistic regression analysis,the predictive factors for higher risk were low tooth brushing frequency[odds ratio(OR)=4.3],high triglycerides(Tg;OR=3.31),high total cholesterol(TC;OR=2.87),higher glycated hemoglobin(HbA1c;OR=2.55),and higher age(OR=1.05)while higher education level was protective(OR=0.53).However,the most influential variables were HbA1c followed by age,TC,Tg,low education level,brushing frequency,and sex on the random forest model(this model showed higher sensitivity for predicting the risk).A good understanding of the predictors for periodontitis in T2DM patients is important in prevention,early detection of susceptible patients,and intervention to improve periodontal health and enable long-term glycaemic control as observed by Xu et al.

关键词： Diabetes mellitus Periodontitis Predictive factors Cardiovascular disease glycaemic control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

guest Editorial:Knowledge‐based deep learning system in bio‐medicine

引用

CAAI Transactions on Intelligence Technology 2024年第4期9卷 787-789页

作者： Yu‐Dong Zhang Juan Manuel górriz University of Leicester LeicesterUK University of granada GranadaSpain

Numerous healthcare procedures can be viewed as medical sector *** the modern era,computers have become indispensable in the realm of medical decision‐***-ever,the common view of computers in the medical field typically extends only to applications that support doctors in diagnosing *** more tightly intertwine computers with the biomedical sciences,professionals are now more frequently utilising knowledge‐driven deep learning systems(KDLS)and their foundational technologies,especially in the domain of neuroimaging(NI).

关键词： learning computer doctor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Current state of the art and future directions: Augmented reality data visualization to support decision-making

引用

Visual Informatics 2024年第2期8卷 80-105页

作者： Mengya Zheng David Lillis Abraham g.Campbell School of Computer Science University College DublinDublinIreland

Augmented Reality(AR),as a novel data visualization tool,is advantageous in revealing spatial data patterns and data-context ***,recent research has identified AR data visualization as a promising approach to increasing decision-making efficiency and *** a result,AR has been applied in various decision support systems to enhance knowledge conveying and comprehension,in which the different data-reality associations have been constructed to aid ***,how these AR visualization strategies can enhance different decision support datasets has not been reviewed *** given the rise of big data in the modern world,this support is critical to decision-making in the coming *** AR to embed the decision support data and explanation data into the end user’s physical surroundings and focal contexts avoids isolating the human decision-maker from the relevant *** the decision-maker’s contexts and the DSS support in AR is a difficult *** paper outlines the current state of the art through a literature review in allowing AR data visualization to support *** facilitate the publication classification and analysis,the paper proposes one taxonomy to classify different AR data visualization based on the semantic associations between the AR data and physical *** on this taxonomy and a decision support system taxonomy,37 publications have been classified and analyzed from multiple *** of the contributions of this literature review is a resulting AR visualization taxonomy that can be applied to decision support *** with this novel tool,the paper discusses the current state of the art in this field and indicates possible future challenges and directions that AR data visualization will bring to support decision-making.

关键词： Augmented reality Decision support Data visualization Taxonomy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The impact of being in the COVID-19 pandemic on in-hospital mortality of non-infected patients aged 80 years and older with ST-elevation myocardial ınfarction

引用

Journal of geriatric Cardiology 2024年第7期21卷 768-774页

作者： Mustafa Ebik Muhammet gürdoğan UğurÖzkan Department of Cardiology Edirne SultanMurat State HospitalEdirneTurkey Department of Cardiology School of MedicineTrakya UniversityEdirneTurkey

The COVID-19 outbreak in late 2019 was declared a pandemic by the World Health Organization(WHO)on March 12,2020.[1]As of the latest WHO data,COVID-19 has caused over 770 million cases and nearly 7 million deaths worldwide.[2]Hospitalizations due to COVID-19 are correlated with advanced age.[3,4]According to re-ports,individuals over the age of 65 account for 80%of COVID-19-related deaths.[3,4]This is primar-ily due to the increased burden of comorbidity with age.

关键词： infected patients mortality

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical Behavior of Panels Reinforced with Orthogonal Plant Fabrics: Experimental and Numerical Assessment

引用

Journal of Renewable Materials 2024年第10期12卷 1791-1810页

作者： Martha L.Sánchez g.Capote Universidad Militar Nueva granada Programa de Ingeniería CivilBogotá110111Colombia Facultad de Ciencias Departamento de FísicaUniversidad Nacional de ColombiaBogotá111321Colombia

The construction sector is one of the main sources of pollution,due to high energy consumption and the toxic substances generated during the processing and use of traditional *** production of cement,steel,and other conventional materials impacts both ecosystems and human health,increasing the demand for ecological and biodegradable *** this paper,we analyze the properties of panels made from a combination of plant fibers and castor oil resin,analyzing the viability of their use as construction *** the research,orthogonal fabrics made with waste plant fibers supplied by a company that deals with the manufacture of furniture and craft products were *** fabrics were made with strips of plant fibers of the Calamus rotang,Bambusa vulgaris,Heteropsis flexuosa,and Salix viminalis *** improve their compatibility with the castor oil resin,a cold argon plasma treatment was *** effect of the treatment on the properties of the fibers and the panels was *** density,water absorption capacity,and swelling percentage were ***,compression,static bending,and linear buckling tests were carried *** study found that panels made with treated fiber fabrics exhibited a reduction of approximately 10%in absorption capacity and up to 35%in swelling percentage *** made with Bambusa vulgaris fabrics exhibited the highest strength and stiffness *** models were constructed using commercial finite element *** comparing the numerical results with the experimental ones,differences of less than 15%were seen,demonstrating that the models allow adequately predicting the analyzed *** comparing the values obtained with the characteristic values of oriented strand board,the results suggest that panels made with unconventional materials could replace commercial panels traditionally made with wood-based fibers and particles and other composite materials in several applications in th

关键词： Unconventional materials nonstructural panels plantﬁbers surface treatment physical properties mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：