检索结果-南通市图书馆

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： gürel Cam Ali günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent research in mechanical properties of geopolymer-based ultrahigh-performance concrete:A review

引用

Defence Technology（防务技术） 2024年第2期32卷 67-88页

作者： g.Murali Division of Research&Innovation Uttaranchal UniversityDehradun 248007India

Due to the growing need for sustainable and ultra-high-strength construction materials,scientists have created an innovative ultra-high-performance concrete called geopolymer based ultra-highperformance concrete(gUHPC).Besides,in the last few decades,there have been a lot of explosions and ballistic attacks around the world,which have killed many civilians and fighters in border *** this context,this article reviews the fresh state and mechanical properties of ***,the ingredients of gUHPC and fresh properties such as setting time and flowability are briefly ***,the review of compressive strength,flexure strength,tensile strength and modulus of elasticity of fibrous ***,the blast and projectile impact resistance performance was ***,the microstructural characteristics were reviewed using the scanning electron microscope and X-ray Powder *** review outcome reveals that the mechanical properties were increased when 30%silica fume was added to a higher dose of steel fibre to improve the microstructure of *** is hypothesized that the brittleness of gUHPC was mitigated by adding 1.5%steel fibre reinforcement,which played a role in the decrease of contact explosion cratering and *** the need for cement in gUHPC was a key factor in the review,indicating a promising potential for lowering carbon ***,gUHPC research is still in its early stages,so more study is required before its full potential can be utilized.

关键词： Mechanical properties Blast Projectile impact Fibre geopolymer Silica fume Alkaline activators

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy

引用

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 362-373页

作者： F.Akbari M.golkaram S.Beyrami g.Shirazi k.Mantashloo R.Taghiabadi M.Saghafi Yazdi I.Ansarian Department of Metallurgy and Material Science Imam Khomeini International University(IKIU)Qazvin ***Iran

The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4Si al-loy through a high solidification cooling rate(SCR).According to the results,by increasing the SCR from 2.0 to 59.5℃/s the average size of primary Si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,***-ing the SCR also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological *** instance,under the applied pressure of 0.5 MPa,an in-crease in the SCR from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,*** wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.

关键词： zinc-silicon alloy primary silicon solidification cooling rate tribology sliding wear

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Biological perspectives in geotechnics:Application and monitoring

引用

Journal of Rock Mechanics and geotechnical Engineering 2024年第7期16卷 2854-2878页

作者： Partha Narayan mishra Surabhi Jain Thierry Bore Ilhan Chang Yeong-Man kwon Yijie Wang Hirak Ranjan Dash Ashutosh kumar Satyam Tiwari Ningjun Jiang Sarat kumar Das Alexander Scheuermann Department of Civil Engineering Indian Institute of Technology KanpurKanpur208016India School of Civil Engineering University of QueenslandSt LuciaQLD4072Australia Department of Civil Engineering Indian Institute of Technology DhanbadDhanbad826004India Department of Civil System Engineering Ajou UniversitySuwon-si16499Republic of Korea School of Engineering and IT University of New South WalesCanberraACT2600Australia Department of Civil and Environmental Engineering Northwestern UniversityEvanstonIL60208USA Department of Civil and Environmental Engineering The Hong Kong Polytechnic UniversityHong KongChina National Forensic Sciences University New Delhi110085India Southeast University Nanjing211189China

This paper builds on exploring the applications of biomediated pathways to solve geotechnical ***,the state of the art of biological remediation strategies including microbial remediation and phytoremediation have been introduced and critically reviewed in the context of decontaminating the ***,biopolymerisation,biomineralisation and bioneutralisation processes have been depicted with a special emphasis on the applications including but not limited to soil stabilisation,soil erosion prevention,anti-desertification and pH *** of these methods have their own limitations and bottlenecks while scaling up,and these challenges have been summarised and some possible paths to overcome the challenges have also been *** state of the art of electromagnetic(EM)monitoring methods to capture the effects of biomediation on spatio-temporal soil properties are then highlighted as a non-invasive and rapid pathway to track the progress of biomediated soil ***,each of the technologies discussed have been evaluated for their maturity level using the principles of technology readiness level(TRL).A majority of the technologies amounting to around 77%are still in the TRL 4e7,*** the valley of *** is thus evident that development of these technologies needs to be supported with appropriate funding for improving their maturity to a level of industrial deployment.

关键词： Biogeotechnics Bioremediation Phytoremediation Biopolymers Biomineralisation Electromagnetic(EM)methods technology readiness level(TRL)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Organic-inorganic hybrid materials and architectures in optoelectronic devices: Recent advancements

ChemPhysMater

引用

ChemPhysMater 2024年第3期3卷 252-272页

作者： M.Arya S.Heera P.Meenu k.g.Deepa Department of Physics University of KeralaThiruvananthapuram 695581India Department of Nanoscience and Nanotechnology University of KeralaThiruvananthapuram 695581India

Organic-inorganic hybrids are next-generation materials for use in high-performance optoelectronic devices owing to their adaptabilities in terms of design and *** article reviews the application of hybrid materials and layers in several widely used optoelectronic devices,i.e.,light amplification by stimulated emission of radiation(LASER),solar cells,and light-emitting diodes(LEDs).The effects of the incorporation of inorganic particles on photostability and optical gain are analyzed in the first section with reference to dye and perovskite ***,the strategies used in blending inorganic nanostructures into organic solar cells and bulk heterojunctions are *** use of various organic layers as electron-and hole-transport materials in Si heterojunction solar cells is reviewed in ***,the benefits of the presence of organic components in quantum-dot-and perovskite-based LEDs are derived from the *** integration of organic and inorganic components with optimal interfaces and morphologies is a challenge in developing hybrid materials with improved efficiencies.

关键词： Optoelectronics Hybrid material Device performance Photostability Advantages

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Atomistic Investigation of Shock-Induced Amorphization within Micro-shear Bands in Hexagonal Close-Packed Titanium

引用

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1590-1600页

作者： Z.C.Meng k.g.Wang T.Ali D.Li C.g.Bai D.S.Xu S.J.Li A.H.Feng g.J.Cao J.H.Yao Q.B.Fan H.Wang R.Yang Institute of Metal Research Chinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Interdisciplinary Centre for Additive Manufacturing(ICAM) School of Materials and ChemistryUniversity of Shanghai for Science and TechnologyShanghai 200093China School of Materials Science and Engineering Tongji UniversityShanghai 201804China key Laboratory for Light-Weight Materials Nanjing Tech UniversityNanjing 210009China National key Laboratory of Science and Technology on Materials Under Shock and Impact School of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401135China

The mechanical response of a single crystal titanium sample against(0001)α surface impact was investigated using molecular dynamics ***,non-uniform plastic deformation was observed in the *** high strain rates,amorphization occurred near the edge of the contact region where severe shear strain induced a large number of stacking faults(SFs)and *** contrast,the central part of the contact region underwent less deformation with significantly fewer ***,instead of amorphization by consuming SFs and dislocations,there was a gradual increase in the density of dislocations and SFs during the process of *** local amorphous regions eventually grew into shear bands.

关键词： Shock compression Amorphization Shear band Titanium Molecular dynamics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Intelligent Energy Utilization Analysis Using IUA-SMD Model Based Optimization Technique for Smart Metering Data

引用

Journal of Harbin Institute of Technology(New Series) 2024年第1期31卷 90-98页

作者： k.Rama Devi V.Srinivasan g.Clara Barathi Priyadharshini J.gokulapriya Department of Information Technology Panimalar Engineering CollegeChennaiTamil Nadu 600029India Department of Computer Applications Dayananda Sagar College of EngineeringBengaluru 560078KarnatakaIndia Department of Computer Appliations Karpagam Academy of Higher EducationCoimbatoreTamil Nadu 641021India Department of Computer Science Rathinam College of Arts and ScienceCoimbatoreTamil Nadu 641021India

Smart metering has gained considerable attention as a research focus due to its reliability and energy-efficient nature compared to traditional electromechanical metering systems. Existing methods primarily focus on data management,rather than emphasizing efficiency. Accurate prediction of electricity consumption is crucial for enabling intelligent grid operations,including resource planning and demandsupply balancing. Smart metering solutions offer users the benefits of effectively interpreting their energy utilization and optimizing costs. Motivated by this,this paper presents an Intelligent Energy Utilization Analysis using Smart Metering Data(IUA-SMD)model to determine energy consumption patterns. The proposed IUA-SMD model comprises three major processes:data Pre-processing,feature extraction,and classification,with parameter optimization. We employ the extreme learning machine(ELM)based classification approach within the IUA-SMD model to derive optimal energy utilization labels. Additionally,we apply the shell game optimization(SgO)algorithm to enhance the classification efficiency of the ELM by optimizing its parameters. The effectiveness of the IUA-SMD model is evaluated using an extensive dataset of smart metering data,and the results are analyzed in terms of accuracy and mean square error(MSE). The proposed model demonstrates superior performance,achieving a maximum accuracy of65.917% and a minimum MSE of0.096. These results highlight the potential of the IUA-SMD model for enabling efficient energy utilization through intelligent analysis of smart metering data.

关键词： electricity consumption predictive model data analytics smart metering machine learning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of an ultrathin liquid sheet target for laser ion acceleration at high repetition rates in the kilohertz range

引用

High Power Laser Science and Engineering 2024年第3期12卷 134-145页

作者： M.Füle A.P.kovács T.gilinger M.karnok P.gaál S.Figul g.Marowsky k.Osvay National Laser-Initiated Transmutation Laboratory University of SzegedSzegedHungary Department of Experimental Physics University of SzegedSzegedHungary ELI ALPS ELI-HU Non-Profit Ltd.SzegedHungary Department of Optics and Quantum Electronics University of SzegedSzegedHungary Advanced Microfluidic Systems gmbH GöttingenGermany

A colliding microjet liquid sheet target system was developed and tested for pairs of round nozzles of 10,11 and 18μm in *** sheet's position stability was found to be better than a few *** interaction with 50 mJ laser pulses,the 18μm jet has a resonance amplitude of 16μm at a repetition rate of 33 Hz,while towards 100 Hz it converges to 10μm for all nozzles.A white-light interferometric system was developed to measure the liquid sheet thickness in the target chamber both in air and in vacuum,with a measurement range of 182 nm±1μm and an accuracy of±3%.The overall shape and 3D shape of the sheet follow the Hasson±Peck model in *** vacuum versus air,the sheet gradually loses 10%of its thickness,so the thinnest sheet achieved was below 200 nm at a vacuum level of 10±4mbar,and remained stable for several hours of operation.

关键词： diagnostics laser ion acceleration nanometric liquid sheet targets vacuum test

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nitrogen mineralization in the oldest climax communities in the eastern Mediterranean region

引用

Journal of Forestry Research 2024年第1期35卷 213-228页

作者： Fatma Selcen Sakar gürcan güleryüz Department of Biology Section Ecology GörükleGraduate School of Natural and Applied ScienceUniversity of Bursa Uludağ16059 NilüferBursaTurkey Department of Biology Section Ecology GörükleFaculty of Science and ArtsUniversity of Bursa Uludağ16059 NilüferBursaTurkey

In this study,we investigated how tree species affect N mineralization in connection to some soil properties and seconder metabolite levels of litter,in the soil of the old-est native forest *** the oldest pure communi-ties of Pinus nigra(PN),Fagus orientalis(FO),and Abies bornmuelleriana(AB)in the mountain range of Mount Uludağ,Bursa,Turkey,annual net yield and N mineraliza-tion in the 0-5-and 5-20-cm soil layers were determined in a field incubation study over 1 *** locations were chosen from 1300 to 1600 m a.s.l.,and moisture content(%),pH,water-holding capacity(%),organic C,total N,and C/N ratio,and annual net mineral N yield of the soil and hydro-lyzed tannic acid and total phenolic compounds in litter were compared for these forest *** had the highest annual net Nmin yield(43.9±4.8 kg ha^(-1) a^(-1)),*** the lowest(30.5±4.2 kg ha^(-1) a^(-1)).Our findings show that in the oldest forest ecosystems,the seasonal soil moisture content and tree species play an essential role in N cycling and that hydrolyzed tannic acids and total phenolic compounds effectively control N *** acid and total phenolics in the litter were found to inhibit nitrification,but total phenolics were found to stimulate ammonification.

关键词： Oldest forest communities Nitrogen mineralization Nitrification Tannic acid Total phenolic Litter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Shell-model representations of the microscopic version of the Bohr-Mottelson collective model

引用

Communications in Theoretical Physics 2024年第8期76卷 79-90页

作者： H g ganev Joint Institute for Nuclear Research DubnaRussia Institute of Mechanics Bulgarian Academy of SciencesSofiaBulgaria

The structure of the irreducible collective spaces of the group Sp(12,R),which many-particle nuclear states are classified according to the chain Sp(12,R)⊃U(6)⊃SO(6)⊃SU_(pn)(3)⊗SO(2)⊃SO(3)of the proton-neutron symplectic model(PNSM),is considered in *** chain of the PNSM was recently shown to correspond to a microscopic shell-model version of the Bohr-Mottelson collective *** construction of the relevant shell-model representations of the Sp(12,R)group along this chain is considered for three nuclei with varying collective properties and from different mass *** is shown that the SU_(pn)(3)basis states of the Sp(12,R)representations belonging to the SO(6)irreps with seniorityυ≥υ0,withυ0 denoting the maximal seniority SO(6)irrep contained in the Sp(12,R)bandhead,are always Pauli allowed,but organized in a different way into different SO(6)*** is in contrast to the case of filling the levels of the standard three-dimensional harmonic oscillator and using the plethysm *** the SU_(pn)(3)multiplets withinυk are important for the practical application of the microscopic version of the Bohr-Mottelson collective model.

关键词： microscopic shell-model version of the Bohr-Mottelson model proton-neutron symplectic model Sp(12,R)dynamical algebra shell-model representations

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：