检索结果-南通市图书馆

Influence of curing conditions on the shrinkage behavior of three-dimensional printed concrete formwork

Frontiers of Structural and Civil Engineering 2024年第8期18卷 1225-1236页

作者： m.BEKAERT K.van TITTELBOOm g.de SCHUTTER magnel-Vandepitte Laboratory for structural Engineering and Building materials Department of Structural Engineering and Building MaterialsFaculty of Engineering and ArchitectureGhent UniversityGhent 60 B-9052Belgium

The use of three-dimensional(3D)printed concrete as formwork is becoming more widely applied within the ***,the technology is still not optimized and there are many reports of preliminary cracking during the curing of cast *** is believed to result from differential shrinkage between the printed and cast *** cracks(in the printed concrete or at the interface between the infill and printed concrete)form a preferential path for aggressive substances and can reduce the durability of the combined concrete *** ensure the desired service life of the structure,it is important that the differential shrinkage between cast and printed concrete is *** study investigated the effect of curing conditions on the differential shrinkage behavior of 3D and cast *** influence of prewetting of the dry-cured 3D printed formwork was also *** the experimental program,a vibrated and self-compacting concrete were used as cast *** 3D printed formwork was produced and combined with cast concrete to simulate a concrete *** formwork was cured for 1,7,or 28 d exposed to the air(relative humidity:60%or 95%)or submerged in *** length change of the combined elements was observed over 56 d after concrete casting and throughout the thickness of the *** show that increasing the curing period in dry conditions of the printed concrete leads to an expansion of the formwork on the first day after *** expansion leads to a non-uniform strain evolution throughout the curing period of the combined *** concrete formwork stored in wet conditions does not expand after the casting process but tends to show a decreasing linear deformation within the whole elements.

关键词： 3D concrete printing formwork shrinkage curing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

引用

Applied mathematics and mechanics(English Edition) 2024年第1期45卷 197-216页

作者： C.g.PAVITHRA B.J.gIREESHA m.L.KEERTHI Department of Pg Studies and Research in mathematics Kuvempu UniversityShankaraghatta 577451India Department of mathematics and Statistics M.S.Ramaiah University of Applied SciencesBengaluru 560058India

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTm) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

关键词： convection radiation moving longitudinal fin Adomian decomposition Sumudu transform method(ADSTm) trihybrid nanofluid magnetic field

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pressurized environments directly influence friction and wear of dry steel contacts—Investigations in a novel high fluid pressure tribometer

引用

Friction 2024年第7期12卷 1599-1617页

作者： Paul REICHLE Jakob BARZ georg UmLAUF günter E.m.TOVAR Institute of Interfacial Process Engineering and Plasma Technology(IgVP) University of StuttgartStuttgart 70569Germany Fraunhofer Institute for Interfacial Engineering and Biotechnology(IgB) Stuttgart 70569Germany

To reduce the usage of classical lubricants in deep drawing,a new tribological system based on volatile lubricants was ***,a volatile medium is injected under high pressure into the interstice between drawing tool and sheet *** on temperature and pressure,the temporary lubricant may exist in its gaseous or liquid *** this study,a novel high fluid pressure tribometer was designed to investigate the friction and wear of dry steel contacts under comparable conditions like in dry deep ***,a new ball-on-disc tribometer was designed and integrated into a high-pressure *** specifically investigate the effects of different environments(technical air,liquid and gaseous carbon dioxide,nitrogen,argon)at atmospheric and high pressure(0.1 mPa,6 mPa)on tribology,the specimens and all components were operating *** the experiments,the friction was measured *** show that the highest friction occurs in air and the lowest in carbon dioxide *** to the experiments,the wear of the specimens was assessed along with changes in surface chemistry related to tribochemical ***,the tribology of the dry sliding contacts is correlated to changes of the surface *** differences as well as similarities regarding the different fluid environments are *** the results show,the differences between the media used are most pronounced at elevated ***,this work gives clear indications on the suitability of volatile lubricants in dry friction or rather gas lubrication,especially for dry deep drawing.

关键词： dry friction and dry wear gas lubrication carbon dioxide tribo-layer dry metal forming

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Periodontitis:An often-neglected complication of diabetes

引用

World Journal of Diabetes 2024年第3期15卷 318-325页

作者： marina g Kudiyirickal Joseph m Pappachan Primary Care Dental Practice The Smile ClinicPreston PR16PZUnited Kingdom Department of Endocrinology and metabolism Lancashire Teaching Hospitals NHS TrustPreston PR29HTUnited Kingdom Faculty of Science Manchester Metropolitan UniversityManchester M156BHUnited Kingdom Faculty of Biology Medicine and HealthThe University of ManchesterManchester M139PLUnited Kingdom

The bidirectional association between type 2 diabetes mellitus(T2Dm)and periodontitis is now well established,resulting in periodontal disease being considered as the 6th major complication of diabetes mellitus(Dm)after cardiovascular disease,eye disease,neuropathy,nephropathy,and peripheral vascular *** can worsen the virulence and invasiveness of pathogenic oral microbial flora aggravating the local inflammation and infection in those with periodontal *** the other hand,the chemical and immunological mediators released into the circulation as part of periodontal inflammation worsen the systemic insulin resistance with worsening of *** if undiagnosed or left untreated can also result in eventual tooth loss.A study by Xu et al in the World Journal of Diabetes examined the predictive factors associated with periodontitis in Chinese patients with *** prevalence of periodontitis was found to be 75.7%in this *** on logistic regression analysis,the predictive factors for higher risk were low tooth brushing frequency[odds ratio(OR)=4.3],high triglycerides(Tg;OR=3.31),high total cholesterol(TC;OR=2.87),higher glycated hemoglobin(HbA1c;OR=2.55),and higher age(OR=1.05)while higher education level was protective(OR=0.53).However,the most influential variables were HbA1c followed by age,TC,Tg,low education level,brushing frequency,and sex on the random forest model(this model showed higher sensitivity for predicting the risk).A good understanding of the predictors for periodontitis in T2Dm patients is important in prevention,early detection of susceptible patients,and intervention to improve periodontal health and enable long-term glycaemic control as observed by Xu et al.

关键词： Diabetes mellitus Periodontitis Predictive factors Cardiovascular disease glycaemic control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tensile deformation of fine-grained mg at 4K,78K and 298K

引用

Journal of magnesium and Alloys 2024年第6期12卷 2534-2556页

作者： m.Walag A.Kula P.Noga T.Tokarski g.Cios m.Niewczas AgH University of Krakow Faculty of Non-Ferrous MetalsKrakowPoland AgH University of Krakow Academic Centre for Materials and NanotechnologyKrakowPoland materials Science and Engineering McMaster UniversityHamiltonCanada

The impact of grain size, ranging from 0.9 μm to 9 μm, on the mechanical properties of commercially pure mg is investigated at temperatures of 4K, 78K, and 298K. The mechanisms governing plastic flow are influenced by both grain size and temperature. At 4K and 78K, dominant deformation modes in mg involve dislocation glide and extension twinning, regardless of grain size. The interactions between basal and non-basal dislocations and dislocations with grain boundaries promote an unusually high rate of work hardening in the plastic regime, leading to premature failure. The yield stress follows the Hall-Petch relationship σy~ k/√d, with the slope k increasing with decreasing temperature. At 298K, in addition to dislocation glide and twinning, grain boundary sliding(gBS) becomes significant in samples with grain sizes below 3 μm, considerably enhancing the material's deformability. gBS activation provides an additional recovery mechanism for dislocations accumulating at grain boundaries, facilitating their absorption during sliding and rotation. Analysis of σ Θ relationship suggests that the basal slip is the dominant dislocation mode in mg at 298K. Decreasing grain size suppresses dislocation activity and twinning and increases gBS, resulting in lower Θ and σ Θ values. Suppressing conventional deformation modes coupled with enhanced gBS yields stress softening, breaking down the Hall-Petch relationship in mg below 3 μm grain size, leading to an inverse Hall-Petch behaviour. The work reports new data on the strength, ductility, work hardening and fracture behaviour, and their variations with mg grain size across different temperature regimes.

关键词： Polycrystalline mg mechanical properties Deformation mechanisms Work-hardening Texture evolution Cryogenic temperatures Hall-Petch relationship

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

modeling mitochondria,where are the numbers?

引用

Neural Regeneration Research 2024年第7期19卷 1435-1436页

作者： Adrian m.Davies Alan g.Holt University Center Shrewsbury ShrewsburyShropshireUK

models and simulations are particularly useful for exploring ideas and concepts in the biological sciences that are expe rimentally *** silico methods are also gaining acceptance with regulatory authorities as an alte... 详细信息

关键词： eliminate authorities acceptance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Transfer learning applications for autoencoder-based anomaly detection in wind turbines

引用

Energy and AI 2024年第3期17卷 1-10页

作者： Cyriana m.A.Roelofs Christian gück Stefan Faulstich Fraunhofer IEE Joseph-Beuys-Straße 834117 KasselGermany

Anomaly detection in wind turbines typically involves using normal behaviour models to detect faults *** behaviour models are often implemented through the use of neural networks,of which autoencoders are particularly popular in this ***,training autoencoder models for each turbine is time-consuming and resource ***,transfer learning becomes essential for wind turbines with limited data or applications with limited computational *** study examines how cross-turbine transfer learning can be applied to autoencoder-based anomaly ***,autoencoders are combined with constant thresholds for the reconstruction error to determine if input data contains an *** models are initially trained on one year’s worth of data from one or more source wind *** are then fine-tuned using small amounts of data from the target wind *** methods for fine-tuning are investigated:adjusting the entire autoencoder,only the decoder,or only the threshold of the *** performance of the transfer learning models is compared to baseline models that were trained on one year’s worth of data from the target wind *** results of the tests conducted in this study indicate that models trained on data of multiple wind turbines do not improve the anomaly detection capability compared to models trained on data of one source wind *** addition,modifying the model’s threshold can lead to comparable or even superior performance compared to the baseline,whereas fine-tuning the decoder or autoencoder further enhances the models’performance.

关键词： Condition monitoring Transfer learning Autoencoder Anomaly detecti on Wind turbines Fault detection

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Estimation of Equivalent model of Photovoltaic Array Using Unscented Kalman Filters

引用

Journal of modern Power Systems and Clean Energy 2024年第3期12卷 819-827页

作者： m.A.gonzález-Cagigal JoséA.Rosendo-macías A.gómez-Expósito the Department of Electrical Engineering University of SevilleSpainand A.Gómez-Expósito is also with ENGREEN Laboratory of Engineering for Energy and Environmental SustainabilitySevilleSpain

This paper proposes the use of the unscented Kalman filter to estimate the equivalent model of a photovoltaic(PV)array,using external measurements of current and voltage at the inverter *** estimated model is of interest to predict the power output of PV plants,in both planning and operation scenarios,and thus improves the efficient operation of power systems with high penetration of renewable *** proposed technique has been assessed in several simulated scenarios under different operating *** results show that accurate estimates are provided for the model parameters,even in the presence of measurement noise and abrupt variations under the external conditions.

关键词： Equivalent model parameter estimation photovoltaic energy unscented Kalman filter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Assembly of functional carboxymethyl cellulose/polyethylene oxide/anatase TiO_(2) nanocomposites and tuning the dielectric relaxation, optical, and photoluminescence performances

引用

Journal of Semiconductors 2024年第7期45卷 26-38页

作者： Asmaa m.Ismail Abeer A.Reffaee Fawzy g.El Desouky Spectroscopy Department Physics Research InstituteNational Research CentreGizaCairo 12622Egypt microwave Physics and Dielectrics Department National Research CentreDokkiCairoEgypt Solid State Physics Department Physics Research InstituteNational Research CentreGizaCairo 12622Egypt

Nanocomposite films consisting of carboxymethyl cellulose,polyethylene oxide(CmC/PEO),and anatase titanium diox-ide(TO)were produced by the use of sol-gel and solution casting ***2 nanocrystals were effectively incorporated into CmC/PEO polymers,as shown by X-ray diffraction(XRD)and attenuated total reflectance fourier transform infrared(ATR-FTIR)*** roughness growth is at high levels of TO nanocrystals(TO NCs),which means increasing active sites and defects in CmC/*** differential scanning calorimetry(DSC)thermograms,the change in glass transition temperature(Tg)val-ues verifies that the polymer blend interacts with TO *** increment proportions of TO NCs have a notable impact on the dielectric performances of the nanocomposites,as *** electrical properties of the CmC/PEO/TO nanocomposite undergo significant *** nanocomposite films exhibit a red alteration in the absorption edge as the concentration of TO NCs increases in the polymer *** decline in the energy gap is readily apparent as the weight percentage of TO NCs *** photoluminescence(PL)emission spectra indicate that the sites of the luminescence peak maximums show slight variation;peaks get wider,while their intensities decrease dramatically as the concentration of TO *** nanocomposite materials show potential for multifunctional applications including optoelectronics,antireflection coatings,pho-tocatalysis,light emitting diodes,and solid polymer electrolytes.

关键词： anatase TiO_(2) CmC/PEO nanocomposites optical photoluminescent electrical optoelectronics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Supposition of graphene stacks to estimate the contact resistance and conductivity of nanocomposites

引用

Applied mathematics and mechanics(English Edition) 2024年第4期45卷 663-676页

作者： Y.ZARE m.T.mUNIR g.J.WENg K.Y.RHEE Biomaterials and Tissue Engineering Research group Department of Interdisciplinary TechnologiesBreast Cancer Research CenterMotamed Cancer InstituteTehran ***Iran College of Engineering and Technology American University of the Middle EastEgaila 54200Kuwait Department of mechanical and Aerospace Engineering Rutgers UniversityNew BrunswickNJ 08903U.S.A. Department of mechanical Engineering(BK21 Four) College of EngineeringKyung Hee UniversityYongin 446701Republic of Korea

In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously *** contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact *** developed model's accuracy is verified through numerous experimental *** further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are ***,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling *** dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/*** increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's ***,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.

关键词： graphene polymer composite stacked nanosheet tunneling conductivity contact resistance interphase

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：