检索结果-南通市图书馆

Review on friction stir welding of dissimilar magnesium and aluminum alloys: Scientometric analysis and strategies for achieving high-quality joints

引用

Journal of Magnesium and Alloys 2023年第11期11卷 4082-4127页

作者： Mohamed M.Z.Ahmed Mohamed M.El-Sayed Seleman Dariusz Fydrych gürel çam Department of Mechanical Engineering College of Engineering at Al KharjPrince Sattam Bin Abdulaziz UniversityAl Kharj 11942Saudi Arabia Department of Metallurgical and Materials Engineering Faculty of Petroleum and Mining EngineeringSuez UniversitySuez 43512Egypt Faculty of Mechanical Engineering and Ship Technology Institute of Machines and Materials TechnologyGdańsk University of TechnologyGabriela Narutowicza Street 11/12Gdańsk 80-233Poland Department of Mechanical Engineering Iskenderun Technical UniversityIskenderunHatay 31200Turkiye

Magnesium and aluminum alloys continually attract interest as lightweight structural materials for transport applications. However, joining these dissimilar alloys is very challenging. The main obstacle that hinders progress in dissimilar Mg-Al joining is the formation of brittle intermetallic compounds(IMCs). As a solid-state joining technique, FSW is an excellent candidate to attenuate the deleterious IMC effects in dissimilar Al-Mg joining due to the inherent low heat inputs involved in the process. However, the IMCs, namely Al_(3)Mg_(2) and Al_(12)Mg_(17) phases, have also been reported to form during Al-Mg dissimilar FSW;their amount and thickness depend on the heat input involved;thus,the weld parameters used. Since the heat dissipated in the material during the welding process significantly affects the amount of IMCs,the heat input during FSW should be kept as low as possible to control and reduce the amount of IMCs. This review aims to critically discuss and evaluate the studies conducted in the dissimilar Al/Mg FSW through a scientometric analysis and also with a focus on the strategies recently applied to enhance joint quality. The scientometric analysis showed that the main research directions in Mg/Al FSW are the technological weldability of aluminum and magnesium during FSW, structural morphology, and mechanical properties of dissimilar welded joints. Considering the scope of application of the aforementioned joints, the low share of articles dealing with environmental degradation and operational cracking is surprising. This might be attributed to the need for well-developed strategies for obtaining high-quality and sustainable joints for applications. Thus, the second part of this review is conventional, focusing mainly on the new strategies for obtaining high-quality Mg/Al joints. It can be concluded that in addition to the necessity to optimum welding parameters to suppress the excessive heat to limit the amount and thickness of IMC formed and improv

关键词： Friction stir welding(FSW) Al-alloys Mg-alloys Dissimilar material welding Intermetallics Weld performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： gürel Cam Ali günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(Mam)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,Mam is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(am)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAam) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Wood-drying Condensate on Emission of Volatile Organic Compounds and Bonding Properties of Fibreboard

引用

Journal of Bionic Engineering 2020年第1期17卷 206-214页

作者： Nadir Ayrilmis Tolga Kapti Ali gürel Martin Ohlmeyer Department of Wood Mechanics and Technology Forest FacultyIstanbul University-CerrahpasaIstanbul 34473Turkey Polisan Kimya San.A.(S). Dilovas(i)Organize Sanayi B(o)lgesi 1.K(i)s(i)m Liman Cad.No:7Dilovas(i)41455Turkey Forest Research Institute Marmara RegionGeneral Directorate of Forestry of TurkeyIstanbul 34398Turkey Thünen-Institut für Holzforschung Thünen Institute of Wood ResearchLeuschnerstr.91 cHamburg 21031Germany

Potential use of condensate generated by cooling the steam obtained during high-frequency/vacuum drying step of hardwood lumber was *** liquid condensates were obtained from oak,beech and walnut *** liquid condensate was then used as a replacement for deionized water in the synthesis of Urea-Formaldehyde(UF)resin(5 wt%of total resin)using a laboratory scale *** Density Fibreboards(MDFs)were produced using control and modified *** of Volatile Organic Compounds(VOCs)from the MDFs were determined by Micro Chamber *** bonding properties of the MDFs were determined according to European *** main VOC emissions from MDFs produced using UF resin containing the condensate were a-Pinene,b-Pinene,careen,and acetic acid,which were lower than those of the control MDF,except for the acetic acid emission of MDF with oak *** the tree species,the beech wood condensate gave the lowest VOC emissions(732μg·m^-3)from the MDFs,followed by the MDFs containing walnut wood condensate(852μg·m^-3),oak wood condensate(998μg·m^-3),and control MDF(3529μg·m^-3),***,the internal bond strength of MDFs containing the condensate was negatively impacted by the condensate(0.70 N·mm^-2 to 0.54 N·mm^-2 depending on the tree species).The results showed that the liquid wood-drying condensate which generally released to the ground could be efficiently used as an alternative to expensive VOCs scavenger used in the production of UF resin bonded *** may be one of the most efficient uses of the condensate in high value-added materials.

关键词： bionics condensate fibreboard urea-formaldehyde VOCs

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Combustion characteristics of low-quality lignite for different bed material sphericities in a circulating fluidized bed boiler:A numerical study

引用

Particuology 2024年第7期90卷 364-382页

作者： Barış gürel gülşah Karaca Dolgun Osman İpek Ali Keçebaş Department of Mechanical Engineering Engineering FacultySüleyman Demirel UniversityÇünürIspartaTurkey Department of Energy Systems Engineering Technology FacultyMuğla SıtkıKoçman UniversityKötekliMenteşeMuğlaTurkey

This study delves into the combustion behavior of various lignite types within a circulating fluidized bed boiler(CFBB),with a primary focus on the impact of different bed material sphericity ratios(0.5,0.7,and 0.9).Utilizing bed material with a sphericity ratio of 0.9 sourced from theÇan power plant and verified through experimentation,the research reveals several key ***,furnace temperatures tended to rise with higher sphericity ratios,albeit with variations between lignite types,particularly highlighting the complexity of this relationship in the case of gLI-Tunçbilek *** levels in the combustion chamber remained consistent across different sphericity ratios,indicating minimal influence on pressure *** combustion efficiency,especially at the bottom of the boiler,was observed at lower sphericity levels(0.5 and 0.7)forÇan lignite,as reflected in CO_(2) mole *** NO_(x) emissions generally decreased with lower sphericity,the sensitivity to sphericity varied by lignite type,with Ilgın lignite showcasing low NO_(x) but high SO_(2) emissions,underscoring the intricate interplay between lignite properties,sphericity,and ***,this study advances our understanding of CFBB combustion dynamics,offering insights valuable for optimizing performance and emissions control,particularly in lignite-based power.

关键词： Circulating fluidized bed boiler Computational particle fluid dynamics method Particle sphericity ratios NO_(x)and SO_(2)emissions Energy production efficiency

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A VHDL application for kinematic equation solutions of multi-degree-of-freedom systems

引用

Journal of Zhejiang University-Science C(Computers and Electronics) 2014年第12期15卷 1164-1173页

作者： Hüseyin Oktay ERKOL Hüseyin DEMírel Department of Mechatronics Engineering Faculty of Technology Karabük University Department of Electrical and Electronics Engineering Faculty of Engineering Karabük University

As kinematic calculations are complicated, it takes a long time and is difficult to get the desired accurate result with a single processor in real-time motion control of multi-degree-of-freedom(MDOF) systems. Another calculation unit is needed, especially with the increase in the degree of freedom. The main central processing unit(CPU) has additional loads because of numerous motion elements which move independently from each other and their closed-loop controls. The system designed is also complicated because there are many parts and cabling. This paper presents the design and implementation of a hardware that will provide solutions to these problems. It is realized using the Very High Speed Integrated Circuit Hardware Description Language(VHDL) and field-programmable gate array(FPgA). This hardware is designed for a six-legged robot and has been working with servo motors controlled via the serial port. The hardware on FPgA calculates the required joint angles for the feet positions received from the serial port and sends the calculated angels to the servo motors via the serial port. This hardware has a co-processor for the calculation of kinematic equations and can be used together with the equipment that would reduce the electromechanical mess. It is intended to be used as a tool which will accelerate the transition from design to application for robots.

关键词： Multi-degree-of-freedom systems Kinematics Co-processor Serial communication Six-legged robot

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Stepping up after spinal cord injury:negotiating an obstacle during walking

引用

Neural Regeneration Research 2025年第7期20卷 1919-1929页

作者： Alain Frigon Charly g.Lecomte Department of Pharmacology-Physiology Faculty of Medicine and Health SciencesUniversitéde SherbrookeCentre de recherche du Centre Hospitalier Universitaire de SherbrookeSherbrookeQCCanada

Every day walking consists of frequent voluntary modifications in the gait pattern to negotiate *** spinal cord injury,stepping over an obstacle becomes *** over an obstacle requires sensorimotor transformations in several structures of the brain,including the parietal cortex,premotor cortex,and motor *** information and planning are transformed into motor commands,which are sent from the motor cortex to spinal neuronal circuits to alter limb trajectory,coordinate the limbs,and maintain *** spinal cord injury,bidirectional communication between the brain and spinal cord is disrupted and animals,including humans,fail to voluntarily modify limb trajectory to step over an ***,in this review,we discuss the neuromechanical control of stepping over an obstacle,why it fails after spinal cord injury,and how it recovers to a certain extent.

关键词： biomechanics locomotion neurophysiology obstacle negotiation spinal cord injury

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bioelectronic medicine in modulation of cortical spreading depolarization and beyond

引用

Neural Regeneration Research 2025年第2期20卷 481-482页

作者： Khaled Alok Timothy g.White Chunyan Li Department of Neurosurgery Donald and Barbara Zucker School of Medicine at Hofstra/NorthwellHempsteadNYUSA Translational Brain Research Laboratory The Feinstein Institutes for Medical ResearchManhassetNYUSA

Bioelectronic interventions,specifically trigeminal nerve st imulat ion(TNS),have attracted considerable attention in conditions where cortical spreading depolarizations(CSDs)accompanied by compromised cerebral perfusion may exacerbate neurological *** pharmacological interventions have demonstrated initial potential in addressing CSDs,a standardized treatment approach has not yet been *** objective of this perspective is to explore emerging bioelectronic methodologies for addressing CSDs,particularly emphasizing TNS,and to underscore TNS’s capacity to enhance neurovascular coupling and cerebral perfusion.

关键词： cerebral perfusion electronic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nonlinear Algebraic Equations Solved by an Optimal Splitting-Linearizing Iterative Method

引用

Computer Modeling in Engineering & Sciences 2023年第5期135卷 1111-1130页

作者： Chein-Shan Liu Essam rel-Zahar Yung-Wei Chen Center of Excellence for Ocean Engineering Center of Excellence for the OceansTaiwan Ocean UniversityKeelung202301Taiwan Department of Mathematics College of Sciences and Humanities in Al-KharjPrince Sattam bin Abdulaziz UniversityAlkharj11942Saudi Arabia Department of Basic Engineering Science Faculty of EngineeringMenofia UniversityShebin El-Kom32511Egypt Department of Marine Engineering Taiwan Ocean UniversityKeelung202301Taiwan

How to accelerate the convergence speed and avoid computing the inversion of a Jacobian matrix is important in the solution of nonlinear algebraic equations(NAEs).This paper develops an approach with a splitting-linearizing technique based on the nonlinear term to reduce the effect of the nonlinear *** decompose the nonlinear terms in the NAEs through a splitting parameter and then linearize the NAEs around the values at the previous step to a linear *** the maximal orthogonal projection concept,to minimize a merit function within a selected interval of splitting parameters,the optimal parameters can be quickly *** each step,a linear system is solved by the gaussian elimination method,and the whole iteration procedure is convergent very *** numerical tests show the high performance of the optimal split-linearization iterative method(OSLIM).

关键词： Nonlinear algebraic equations novel splitting-linearizing technique iterative method maximal projection optimal splitting parameter

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cross-Context News Corpus for Protest Event-related Knowledge Base Construction

引用

Data Intelligence 2021年第2期3卷 308-335页

作者： Ali Hürriyetoglu Erdem Yörük Osman Mutlu Fırat Durusan ÇagrıYoltar Deniz Yüret Burak gürel KoçUniversity Rumelifeneri yoluSariyerIstanbul 34450Turkey

We describe a gold standard corpus of protest events that comprise various local and international English language sources from various *** corpus contains document-,sentence-,and token-level *** corpus facilitates creating machine learning models that automatically classify news articles and extract protest event-related information,constructing knowledge bases that enable comparative social and political science *** each news source,the annotation starts with random samples of news articles and continues with samples drawn using active *** batch of samples is annotated by two social and political scientists,adjudicated by an annotation supervisor,and improved by identifying annotation errors *** found that the corpus possesses the variety and quality that are necessary to develop and benchmark text classification and event extraction systems in a cross-context setting,contributing to the generalizability and robustness of automated text processing *** corpus and the reported results will establish a common foundation in automated protest event collection studies,which is currently lacking in the literature.

关键词： Event extraction Text classification Political science Social science News Contentious politics Protests Event coreference resolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Impact of Zika virus non-structural protein mutations on hippocampal damage

引用

Neural Regeneration Research 2025年第8期20卷 2307-2308页

作者： Larissa M.g.Cassiano Roney S.Coimbra Neurogenômica/Imunopatologia Instituto RenéRachouFiocruzBelo HorizonteBrazil Departamento de Bioquímica e Imunologia Instituto de Ciências BiológicasUniversidade Federal de Minas GeraisBelo HorizonteBrazil

The Zika virus(ZIKV),a member of the Flaviviridae family,attracted worldwide attention for its connection to severe neurological effects,notably microcephaly in newborns,first reported during the 2015 epidemic in ***,its impact goes beyond fetal and neonatal abnormalities,also affecting the central nervous system(CNS)in both children and adults,leading to enduring cognitive and behavioral impairments.

关键词： damage fetal neonatal

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：