检索结果-南通市图书馆

Numerical simulation of three dimensional concrete printing based on a unified fluid and solid mechanics formulation

引用

Frontiers of Structural and Civil Engineering 2024年第4期18卷 491-515页

作者： Janis REINOLD Koussay DAADOUCH günther MESCHKE Institute for Structural Mechanics Ruhr University BochumBochum 44801Germany

Deformation control constitutes one of the main technological challenges in three dimensional(3D)concrete printing,and it presents a challenge that must be addressed to achieve a precise and reliable construction ***-based information of the expected deformations and stresses is required to optimize the construction process in association with the specific properties of the concrete *** this work,a novel thermodynamically consistent finite strain constitutive model for fresh and early-age 3D-printable concrete is *** model is then used to simulate the 3D concrete printing process to assess layer shapes,deformations,forces acting on substrate layers and prognoses of possible structural collapse during the layer-by-layer *** constitutive formulation is based on a multiplicative split of the deformation gradient into elastic,aging and viscoplastic parts,in combination with a hyperelastic potential and considering evolving material properties to account for structural buildup or *** advantage of this model is the stress-update-scheme,which is similar to that of small strain plasticity and therefore enables an efficient integration with existing material *** constitutive model uses the particle finite element method,which serves as the simulation framework,allowing for modeling of the evolving free surfaces during the extrusion *** analyses of three printed layers are used to create deformation plots,which can then be used to control the deformations during 3D concrete *** study offers further investigations,on the structural level,focusing on the potential structural collapse of a 3D printed concrete *** capability of the proposed model to simulate 3D concrete printing processes across the scales—from a few printed layers to the scale of the whole printed structure—in a unified fashion with one constitutive formulation,is demonstrated.

关键词： particle finite element method 3D concrete printing multiplicative split additive manufacturing elastoviscoplasticity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Protirelin(thyrotropin-releasing hormone)in thyroid gland:possible involvement in regulation of thyroid status

引用

中国药理学报 1999年第4期20卷 289-291页

作者： Derek g SMYTH Jesus del RIO-gARCIA Herwig WALLNÖFER Harald gOgL Wolfgang SIMMA Ariana HUBER Robert EMBACHER Hamish FRASER günther kreil Institute of Molecular Biology.BillrothstnasseⅡ A-5020SalzburgAustria Unit of Phammacology Universiry of MurciaMurcia 301000.Spain MRC Reproductive Biology Unit Chalmers StreetEdinburgh EH89JZScotlanul.UK

AIM:To establish the presence of the hypothalamic hormone protirelin(thyrotropin-releasing hormone,TRH)in human thyroid and to investigate whether the concentration of this peptide in the thyroid gland is sensitive to thyroid ***:A procedure has been developed for the determination of TRH in the thyroid gland,distinct from TRH-like peptides which also react with ***:Human thyroid was shown to contain both authentic TRH and TRH-like peptides,a similar pattern was seen in a range of animal *** concentrations of TRH in non-active goiter thyroids were substantial(41.6-248 pmol·g-1);in contrast the thyroids from hyperthyroid patients contained very little TRH(0.01-2.52 pmol·g-1).CONCLUSION:The physiologic role of TRH in the thyroid is not known but the large difference between the concentrations of this hormone in non-active and hyperactive thyroids suggests that thyroidal TRH may be involved in the regulation of thyroid status.

关键词： protirelin thyroid gland thyrotropin thyroid hormones hyperthyroidism goiter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Circular Current Loop as a Model of Fundamental Particles

引用

Journal of High Energy Physics, gravitation and Cosmology 2024年第1期10卷 303-328页

作者： günther Landvogt Hamburg Germany

The presented circular current loop model reveals that charged fundamental particles such as the electron consist essentially of electric and magnetic energy. The magnetic properties have the same order of magnitude as the electric ones. The electromagnetic field energy is the origin of the inertial mass. The Higgs boson, existing or not, is not needed to “explain” particle mass. The magnetic moment of fundamental particles is not anomalous! The “anomaly” indicates the existence of a small additional amount of kinetic energy. Thus, fundamental particles are not purely field-like such as photons and not (essentially) mass-like such as atoms, they represent a special kind of matter in between. Their kinetic energy is obviously not due to any relativistic effect but is related to an independent physical law that provides, together with the magnetic energy, the angular momentum exactly to be ħ/2. Fundamental particles are (at least) two-dimensional. In the simplest case their core consists of two concentric, nearly identical current loops. Their relative design details, the “anomaly” factor, and the rotational velocity of the uniformly distributed elementary charge follow from the stability condition, i.e. electric and magnetic force balance, and do not depend on the particle’s rest mass! Fundamental particles are objects of classical physics. Their magnetic forces are the true origin of the weak and strong nuclear interactions. For their explanation bosons and gluons are not needed.

关键词： Electric Energy Magnetic Energy Rotational Kinetic Energy Strong and Weak Nuclear Forces

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

罗马共和国晚期埃涅阿斯币(RRC 458/1)新解

引用

古代文明（中英文） 2024年第2期18卷 3-14,M0003页

作者：张红霞顾斯文东北师范大学历史文化学院吉林长春130024 东北师范大学世界古典文明史研究所吉林长春130024

学界主流认为埃涅阿斯币(RRC 458/1)制造于公元前47至前46年的北非,但论据较为薄弱。实际上,相关窖藏仅与恺撒从高卢南进意大利,继而远征非洲行军路线的前段重合,可以推测该币造于起兵地高卢,而非目的地北非。根据图像学分析,埃涅阿斯... 详细信息

学界主流认为埃涅阿斯币(RRC 458/1)制造于公元前47至前46年的北非,但论据较为薄弱。实际上,相关窖藏仅与恺撒从高卢南进意大利,继而远征非洲行军路线的前段重合,可以推测该币造于起兵地高卢,而非目的地北非。根据图像学分析,埃涅阿斯币的纹样以置换图像符号的方式暗示恺撒和维纳斯的联系,藉以提升个人威望,显然属于恺撒与庞培正面对抗前舆论战的手法,而非他掌控罗马政权后的公开宣传。这无疑佐证了埃涅阿斯币制作的较早系年——公元前49年前后。埃涅阿斯币及相关钱币的图像学研究,揭示出罗马由共和向帝制过渡期间政治认同由国家认同向家族认同、个人权威认同的转变,为理解当时的政治史提供了直观却微妙的视角。

关键词：埃涅阿斯币内战恺撒庞培正统性

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： gürel Cam Ali günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200 Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(WA-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(WAAM) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent research in mechanical properties of geopolymer-based ultrahigh-performance concrete:A review

引用

Defence Technology（防务技术） 2024年第2期32卷 67-88页

作者： g.Murali Division of Research&Innovation Uttaranchal UniversityDehradun 248007India

Due to the growing need for sustainable and ultra-high-strength construction materials,scientists have created an innovative ultra-high-performance concrete called geopolymer based ultra-highperformance concrete(gUHPC).Besides,in the last few decades,there have been a lot of explosions and ballistic attacks around the world,which have killed many civilians and fighters in border *** this context,this article reviews the fresh state and mechanical properties of ***,the ingredients of gUHPC and fresh properties such as setting time and flowability are briefly ***,the review of compressive strength,flexure strength,tensile strength and modulus of elasticity of fibrous ***,the blast and projectile impact resistance performance was ***,the microstructural characteristics were reviewed using the scanning electron microscope and X-ray Powder *** review outcome reveals that the mechanical properties were increased when 30%silica fume was added to a higher dose of steel fibre to improve the microstructure of *** is hypothesized that the brittleness of gUHPC was mitigated by adding 1.5%steel fibre reinforcement,which played a role in the decrease of contact explosion cratering and *** the need for cement in gUHPC was a key factor in the review,indicating a promising potential for lowering carbon ***,gUHPC research is still in its early stages,so more study is required before its full potential can be utilized.

关键词： Mechanical properties Blast Projectile impact Fibre geopolymer Silica fume Alkaline activators

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nitrogen mineralization in the oldest climax communities in the eastern Mediterranean region

引用

Journal of Forestry Research 2024年第1期35卷 213-228页

作者： Fatma Selcen Sakar gürcan güleryüz Department of Biology Section Ecology GörükleGraduate School of Natural and Applied ScienceUniversity of Bursa Uludağ16059 NilüferBursaTurkey Department of Biology Section Ecology GörükleFaculty of Science and ArtsUniversity of Bursa Uludağ16059 NilüferBursaTurkey

In this study,we investigated how tree species affect N mineralization in connection to some soil properties and seconder metabolite levels of litter,in the soil of the old-est native forest *** the oldest pure communi-ties of Pinus nigra(PN),Fagus orientalis(FO),and Abies bornmuelleriana(AB)in the mountain range of Mount Uludağ,Bursa,Turkey,annual net yield and N mineraliza-tion in the 0-5-and 5-20-cm soil layers were determined in a field incubation study over 1 *** locations were chosen from 1300 to 1600 m a.s.l.,and moisture content(%),pH,water-holding capacity(%),organic C,total N,and C/N ratio,and annual net mineral N yield of the soil and hydro-lyzed tannic acid and total phenolic compounds in litter were compared for these forest *** had the highest annual net Nmin yield(43.9±4.8 kg ha^(-1) a^(-1)),*** the lowest(30.5±4.2 kg ha^(-1) a^(-1)).Our findings show that in the oldest forest ecosystems,the seasonal soil moisture content and tree species play an essential role in N cycling and that hydrolyzed tannic acids and total phenolic compounds effectively control N *** acid and total phenolics in the litter were found to inhibit nitrification,but total phenolics were found to stimulate ammonification.

关键词： Oldest forest communities Nitrogen mineralization Nitrification Tannic acid Total phenolic Litter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Shell-model representations of the microscopic version of the Bohr-Mottelson collective model

引用

Communications in Theoretical Physics 2024年第8期76卷 79-90页

作者： H g ganev Joint Institute for Nuclear Research DubnaRussia Institute of Mechanics Bulgarian Academy of SciencesSofiaBulgaria

The structure of the irreducible collective spaces of the group Sp(12,R),which many-particle nuclear states are classified according to the chain Sp(12,R)⊃U(6)⊃SO(6)⊃SU_(pn)(3)⊗SO(2)⊃SO(3)of the proton-neutron symplectic model(PNSM),is considered in *** chain of the PNSM was recently shown to correspond to a microscopic shell-model version of the Bohr-Mottelson collective *** construction of the relevant shell-model representations of the Sp(12,R)group along this chain is considered for three nuclei with varying collective properties and from different mass *** is shown that the SU_(pn)(3)basis states of the Sp(12,R)representations belonging to the SO(6)irreps with seniorityυ≥υ0,withυ0 denoting the maximal seniority SO(6)irrep contained in the Sp(12,R)bandhead,are always Pauli allowed,but organized in a different way into different SO(6)*** is in contrast to the case of filling the levels of the standard three-dimensional harmonic oscillator and using the plethysm *** the SU_(pn)(3)multiplets withinυ<υ0 are not all Pauli forbidden,it is safe to discard *** results obtained in the present work are important for the practical application of the microscopic version of the Bohr-Mottelson collective model.

关键词： microscopic shell-model version of the Bohr-Mottelson model proton-neutron symplectic model Sp(12,R)dynamical algebra shell-model representations

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Harmonics in the Squirrel Cage Induction Motor Analytic Calculation Part III: Influence on the Torque-speed Characteristic

引用

CES Transactions on Electrical Machines and Systems 2024年第1期8卷 86-102页

作者： g.Kovács the ganz Electric Works BudapestHungary

The harmonics that appear in the squirrel cage asynchronous machine have been discussed in great detail in the literature for a long time. However, the systematization of the phenomenon is still pending, so we made an attempt to fill this gap in the previous parts of our study by elaborating formulas for calculation of parasitic torques. It was a general demand among those who work in this field towards the author to verify his formulas with measurements. In the literature, it seems,only one detailed, purposeful series of measurements has been published so far, the purpose of which was to investigate the effect of the number of rotor slots on the torque-speed characteristic curve of the machine. The main goal of this study is to verify the correctness of the formulas by comparing them with the referred series of measurements. Relying on this, the expected synchronous parasitic torques were developed for the frequently used rotor slot numbers-as a design guide for the ***, together with our complete table for radial magnetic pull published in our previous work, the designer has all the principles, data and formulas available for the right number of rotor slots for his given machine and for the drive system. This brings this series of papers to an end.

关键词： Asynchronous parasitic torques Induction motor Squirrel cage rotor Space harmonics Synchronous parasitic torques

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Characterization of bright betatron radiation generated by direct laser acceleration of electrons in plasma of near critical density

引用

Matter and Radiation at Extremes 2024年第2期9卷 26-35页

作者： J.Cikhardt M.gyrdymov S.Zähter P.Tavana M.M.günther N.Bukharskii N.Borisenko J.Jacoby X.F.Shen A.Pukhov N.E.Andreev O.N.Rosmej Faculty of Electrical Engineering Czech Technical University in Prague16627 Prague 6Czech Republic goethe University FrankfurtMax-von-Laue-Straße 160438 Frankfurt am MainGermany gSI Helmholtzzentrum für Schwerionenforschung gmbH Planckstraße 164291 DarmstadtGermany Focused Energy gmbH Im Tiefen See 4564293 DarmstadtGermany National Research Nuclear University MEPhI Kashirskoe shosse 31115409 MoscowRussian Federation Lebedev Physical Institute RAS Leninskiy Prospekt 53119991 MoscowRussian Federation Heinrich-Heine-University Düsseldorf Universitätsstrasse 1DüsseldorfGermany Joint Institute for High Temperatures RASIzhorskaya st.13Bldg.2125412 MoscowRussian Federation Moscow Institute of Physics and Technology Institutskiy Pereulok 9141700 DolgoprudnyRussia

Directed x-rays produced in the interaction of sub-picosecond laser pulses of moderate relativistic intensity with plasma of near-critical density are investigated. Synchrotron-like (betatron) radiation occurs in the process of direct laser acceleration (DLA) of electrons in a relativisticlaser channel when the electrons undergo transverse betatron oscillations in self-generated quasi-static electric and magnetic fields. In anexperiment at the PHELIX laser system, high-current directed beams of DLA electrons with a mean energy ten times higher than the ponderomotive potential and maximum energy up to 100 MeV were measured at 10^(19) W/cm^(2)laser intensity. The spectrum of directed x-raysin the range of 5–60 keV was evaluated using two sets of Ross filters placed at 0°and 10°to the laser pulse propagation axis. The differential x-ray absorption method allowed for absolute measurements of the angular-dependent photon fluence. We report 10^(13) photons/sr withenergies >5 keV measured at 0°to the laser axis and a brilliance of 10^(21) photons s^(−1) mm^(−2) mrad−2(0.1%BW)−1. The angular distributionof the emission has an FWHM of 14°–16°. Thanks to the ultra-high photon fluence, point-like radiation source, and ultra-short emissiontime, DLA-based keV backlighters are promising for various applications in high-energy-density research with kilojoule petawatt-class laserfacilities.

关键词： laser acceleration critical

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：