检索结果-南通市图书馆

Fabrication of AZ31/Mg3Y Composites with Excellent Strength and Plasticity via Accumulated Rolling Bonding and Diffusion Annealing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 339-352页

作者： Yang Feng Wenhuan Chen Zheng Xu Weijun He Bin Jiang fusheng pan College of Materials Science and Engineering Chongqing UniversityChongqing400044China International Joint Laboratory for Light Alloys(Ministry of Education) Chongqing UniversityChongqing400044China

AZ31/Mg3Y composites with a layer thickness of 100-200μm were fabricated by accumulated rolling bonding(ARB),which was followed by diffusion annealing at 300℃ for 0-32 h.An interface layer,containing numerous Al-Y precipitates,is formed in the Mg3Y layer that is adjacent to the interface as a result of Al diffusing from the AZ31 layers into the Mg3Y layers.The thickness of the interface layer gets increased and more precipitates are formed in the interface layer with the extension of the annealing time.The microhardness of the AZ31 and Mg3Y layer decreases firstly and then reaches a stable value,while the microhardness of the interface layer increases gradually with the extension of the annealing time.The AZ31/Mg3Y composites exhibit equivalent strength but increased ductility after diffusion annealing,in comparison to the as-rolled AZ31/Mg3Y composite.In addition,the AZ31/Mg3Y composites after annealing always present higher strength and ductility than AZ31/AZ31 composite,which was fabricated by the same process as that for the AZ31/Mg3Y composites.Hetero-deformation induced strengthening also plays an important role in the excellent strength and ductility of the annealed AZ31/Mg3Y composite.This study can provide a direction for improving the plasticity and strength of magnesium alloys synergistically.

关键词： AZ31/Mg3Y composite Accumulated rolling bonding Diffusion annealing Precipitates Strengthening

Current progress of research on heat -resistant Mg alloys: A review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1406-1425页

作者： Hong Yang Wenlong Xie Jiangfeng Song Zhihua Dong Yuyang Gao Bin Jiang fusheng pan National Engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China College of Materials Science and Engineering Chongqing UniversityChongqing 400044China

With the increasing attention received by lightweight metals,numerous essential fields have increased requirements for mag-nesium(Mg)alloys with good room-temperature and high-temperature mechanical properties.However,the high-temperature mechanic-al properties of commonly used commercial Mg alloys,such as AZ91D,deteriorate considerably with increasing temperatures.Over the past several decades,extensive efforts have been devoted to developing heat-resistant Mg alloys.These approaches either inhibit the gen-eration of thermally unstable phases or promote the formation of thermally stable precipitates/phases in matrices through solid solution or precipitation strengthening.In this review,numerous studies are systematically introduced and discussed.Different alloy systems,includ-ing those based on Mg–Al,Mg–Zn,and Mg–rare earth,are carefully classified and compared to reveal their mechanical properties and strengthening mechanisms.The emphasis,limitations,and future prospects of these heat-resistant Mg alloys are also pointed out and dis-cussed to develop heat-resistant Mg alloys and broaden their potential application areas in the future.

关键词： magnesium alloys mechanical properties heat resistance microstructures high temperatures strengthening mechanisms

Recent progress in the research on magnesium and magnesium alloy foils:A short review

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 842-854页

作者： Qiuyan Shen Yongxing Ba Peng Zhang Jiangfeng Song Bin Jiang fusheng pan National Engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China College of Materials Science and Engineering Chongqing UniversityChongqing 400044China National Key Laboratory of Advanced Casting Technologies Chongqing UniversityChongqing 400044China

Magnesium and magnesium alloy foils have great potential for application in battery anodes,electromagnetic shielding,optics and acoustics,and biology because of their excellent specific damping,internal dissipation coefficients,magnetic and electrical conductivities,as well as high theoretical specific capacity.However,magnesium alloys exhibit poor deformation ability due to their hexagonal close-packed crystal structure.Preparing magnesium and magnesium alloy foils with thicknesses of less than 0.1 mm is difficult because of surface oxidation and grain growth at high temperatures or severe anisotropy after cold rolling that leads to cracks.Numerous methods have been applied to prepare magnesium alloy foils.They include warm rolling,cold rolling,accumulative roll bonding,electric plastic rolling,and on-line heating rolling.Defects of magnesium and magnesium alloy foils during preparation,such as edge cracks and breakage,are important factors for consideration.Herein,the current status of the research on magnesium and magnesium alloy foils is summarized from the aspects of foil preparation,defect control,performance characterization,and application prospects.The advantages and disadvantages of different preparation methods and defect(edge cracks and breakage)mechanisms in the preparation of foils are identified.

关键词： magnesium alloy foil rolling defect performance application

Uncovering of the formation of rare earth texture and pseudo fiber bimodal microstructure in the high ductility Mg-2Gd-0.4Zr alloy during extrusion

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第5期172卷 166-184页

作者： Tianxu Zheng Yaobo Hu Chao Zhang Tianshuo Zhao Bin Jiang fusheng pan Aitao Tang College of Materials Science and Engineering Chongqing UniversityChongqing400044China National Engineering Research Center for Magnesium Alloys Chongqing400044China School of Materials Science and Engineering Shanghai Jiao Tong UniversityShanghai200240China

The aim of this research was to elucidate the underlying mechanism involved in the formation of rare earth(RE)texture and pseudo fiber bimodal microstructure in the high ductility Mg-2Gd-0.4Zr alloy.The microstructure and texture evolution during the extrusion process were analyzed using various tech-niques,including optical microscopy(OM),scanning electron microscopy(SEM),electron backscatter diffraction(EBSD),and electron probe microanalysis(EPMA).The findings revealed that the RE texture in the extruded Mg-2Gd-0.4Zr alloy emerged during the dynamic recrystallization(DRX)process and was further strengthened during the subsequent static recrystallization and grain growth processes.The nu-cleation and growth of grains in the streamline region of Zr particles were delayed in comparison to other regions due to the pinning effect of Zr particles,ultimately resulting in the formation of pseudofiber bi-modal microstructure in the extruded Mg-2Gd-0.4Zr alloy.

关键词： Magnesium alloys Ductility Rare earth texture Bimodal microstructure

A First-principles Study on the Adhesion Strength,Interfacial Stability,and Electronic Properties of Mg/Mg_(2)Y Interface

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 537-550页

作者： Yunxuan Zhou Wenjun Tian Quan Dong Hailian Wang Jun Tan Xianhua Chen Kaihong Zheng fusheng pan College of Materials Science and Engineering National Engineering Research Center for Magnesium AlloysChongqing UniversityChongqing 400044China State Key Laboratory of Mechanical Transmission Chongqing UniversityChongqing 400044China Institute of New Materials Guangdong Academy of SciencesGuangzhou 510650China

The interfacial microstructures and configurations directly affect the comprehensive properties of the composites,but their interfacial adhesion mechanism is complicated to expound by experimental methods.In this work,based on the stacking sequence of the Mg/Mg_(2)Y interface models,nine different Mg/Mg_(2)Y interface configurations with top site,bridge site,and hollow site(HCP)under Mg1,Mg_(2),and Y terminations were successfully constructed and systematically explored by first-principles calculations.The results showed that the Mg_(2)Y(0001)surface with Y termination is the most stable when the yttrium chemical potential()is less than-1.09 eV;otherwise,Mg_(2)Y(0001)surface with Mg1 termination is the most stable.The seven-layer Mg(0001)and eleven-layer Mg_(2)Y(0001)slabs are employed to reflect the bulk-like interior properties.Additionally,the Mg(0001)/Mg_(2)Y(0001)with the Y-HCP stacking has the largest interface thermodynamic stability with the value of 2.383 J/m^(2) in all interface configurations owing to its largest work of adhesion.In addition,the interfacial energy of Y-HCP stacking is significantly smaller than those of Mg1-HCP when is approximately less than-0.55 eV,showing that it is more stable.The thermodynamic stability of Mg/Mg_(2)Y with Y-HCP is due to Mg-Y chemical bonds formed between Mg and Y atoms.Lastly,the Mg/Mg_(2)Y interfaces are strong interfaces based on the Griffith fracture theory.

关键词： Mg/Mg_(2)Y interface Interface stability Work of adhesion Electronic structure First-principles calculations

Accelerated design of high-performance Mg-Mn-based magnesium alloys based on novel bayesian optimization

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 750-766页

作者： Xiaoxi Mi Lili Dai Xuerui Jing Jia She Bjørn Holmedal Aitao Tang fusheng pan College of Materials Science and Engineering Chongqing UniversityChongqing 400044China Southwest Technology and Engineering Research Institute Chongqing 400039China National Engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China Department of Materials Science and Engineering Norwegian University of Science and Technology(NTNU)Trondheim 7051Norway

Magnesium(Mg),being the lightest structural metal,holds immense potential for widespread applications in various fields.The development of high-performance and cost-effective Mg alloys is crucial to further advancing their commercial utilization.With the rapid advancement of machine learning(ML)technology in recent years,the“data-driven''approach for alloy design has provided new perspectives and opportunities for enhancing the performance of Mg alloys.This paper introduces a novel regression-based Bayesian optimization active learning model(RBOALM)for the development of high-performance Mg-Mn-based wrought alloys.RBOALM employs active learning to automatically explore optimal alloy compositions and process parameters within predefined ranges,facilitating the discovery of superior alloy combinations.This model further integrates pre-established regression models as surrogate functions in Bayesian optimization,significantly enhancing the precision of the design process.Leveraging RBOALM,several new high-performance alloys have been successfully designed and prepared.Notably,after mechanical property testing of the designed alloys,the Mg-2.1Zn-2.0Mn-0.5Sn-0.1Ca alloy demonstrates exceptional mechanical properties,including an ultimate tensile strength of 406 MPa,a yield strength of 287 MPa,and a 23%fracture elongation.Furthermore,the Mg-2.7Mn-0.5Al-0.1Ca alloy exhibits an ultimate tensile strength of 211 MPa,coupled with a remarkable 41%fracture elongation.

关键词： Mg-Mn-based alloys High-performance Alloy design Machine learning Bayesian optimization

A perspective on the key factors of safety for rechargeable magnesium batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 656-676页

作者： Shuangshuang Tan Jie Xu Rongrui Deng Qiannan Zhao Chaohe Xu Guangsheng Huang Jingfeng Wang fusheng pan National Engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China National Innovation Center for Industry-Education Integration of Energy Storage Technology College of Materials Science and EngineeringChongqing UniversityChongqing 400044China Chongqing Institute of New Energy Storage Materials and Equipment Chongqing 401135China

Rechargeable Mg batteries(RMBs)have become one of the best subsitutes for lithium-ion batteries due to the high volumetric capacity,abundant resources,and uniform plating behavior of Mg metal anode.However,the safety hazard induced by the formation of high-modulue Mg dendrites under a high current density(10 mA cm^(-1))was still revealed in recent years.It has forced researchers to re-examine the safety of RMBs.In this review,the intrinsic safety factors of key components in RMBs,such as uneven plating,pitting and flammability of Mg anode,heat release and crystalline water decomposition of cathode,strong corrosion,low oxidition stability and flammability of electrolytes,and soforth,are systematacially summarized.Their origins,formation mechanisms,and possible safety hazards are deeply discussed.To develop high-performance Mg anode,current strategies including designing artificial SEl,three-dimensional substrates,and Mg alloys are summarized.For practical electrolytes,the configurations of boron-centered anions and simple Mg salts and the functionalized solvent with high boiling point and low flammability are suggested to comprehensively design.In addition,the future study should more focus on the investigation on the thermal runaway and decomposition of cathode materials and separa-tors.This review aims to provide fundamental insights into the relationship between electrochemistry and safety,further promoting the sustainable development of RMBs.

关键词： Rechargeable Mg batteries Battery safety Mg dendrites Electrolyte decomposition Intrinsic safety issues

Progress and prospects of Mg-based amorphous alloys in azo dye wastewater treatment

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 873-889页

作者： Yanan Chen Fengchun Chen Liang Li Chen Su Bo Song Hongju Zhang Shengfeng Guo fusheng pan School of Materials and Energy Southwest UniversityChongqing 400715China Analytical and Testing Center Southwest UniversityChongqing 400715China College of Materials Science and Engineering Chongqing UniversityChongqing 400044China

Mg-based amorphous alloys exhibit efficient catalytic performance and excellent biocompatibility with a promising application probability,specifically in the field of azo dye wastewater degradation.However,the problems like difficulty in preparation and poor cycling stability need to be solved.At present,Mg-based amorphous alloys applied in wastewater degradation are available in powder and ribbon.The amorphous alloy powder fabricated by ball milling has a high specific surface area,and its reactivity is thousands of times better than that of gas atomized alloy powder.But the development is limited due to the high energy consumption,difficult and costly process of powder recycling.The single roller melt-spinning method is a new manufacturing process of amorphous alloy ribbon.Compared to amorphous powder,the specific surface area of amorphous ribbon is relatively lower,therefore,it is necessary to carry out surface modification to enhance it.Dealloying is a way that can form a pore structure on the surface of the amorphous alloys,increasing the specific surface area and providing more reactive sites,which all contribute to the catalytic performance.Exploring the optimal conditions for Mg-based amorphous alloys in wastewater degradation by adjusting amorphous alloy composition,choosing suitable method to preparation and surface modification,reducing cost,expanding the pH range will advance the steps to put Mg-based amorphous alloys in industrial environments into practice.

关键词： Mg-based amorphous alloys Azo dyes Dealloying Surface modification Wastewater degradation.

Interfacial Reaction of Ti6Al4V Lattice Structure-Reinforced VW92 Alloy Matrix Composites

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 570-576页

作者： Haijun Wang Renju Cheng Xianhua Chen Mingbo Yang Daiyi Deng Lirui Liu Yongfeng Zhou Yanlong Ma Kaihong Zheng fusheng pan College of Materials Science and Engineering Chongqing University of TechnologyChongqing 400054China College of Materials Science and Engineering Chongqing UniversityChongqing 400044China Institute of New Materials Guangdong Academy of SciencesGuangzhou 510650China

A novel melting infiltration by ultrasonic vibration was investigated and applied to fabricate Ti6Al4V(TC4)lattice structure-reinforced Mg-10Gd-2Y-1Zn-xZr(refer to VW92 hereafter,x=0,0.5 wt%)alloy matrix composites.The edge-to-edge matching model indicates that the well-matching and possible orientation relationships(ORs)between theα-Mg andα-Ti,[10-10]_(α-Mg)//[11-23]_(α-Ti) in(0002)_(α-Mg)//(10-10)_(α-Ti) possesses the smallest misfit of 0.4%(f_(r)),and thus theα-Mg grains can nucleate on the TC4 lattice structure.Interfacial reaction occurred in the TC4/VW92+0.5 wt%Zr composites,and the reaction product was confirmed to be Al_(2)Zr_(3),AlZr_(2) andα-Ti(Zr)particles formed by continuous solution of Zr-Ti.Among the interfacial products,the AlZr_(2) phase is a brittle phase with high-volume fraction,which is not conducive to the load transfer.But generally speaking,theα-Ti(Zr)and theα-Mg tend to form a coherent interface,which is beneficial for improving the interfacial bonding strength of composites.

关键词： TC4 VW92 composites TC4 lattice structure Interfacial reaction Mismatch