检索结果-南通市图书馆

Advancements and Challenges in Organic–Inorganic Composite Solid Electrolytes for All‑Solid‑State Lithium Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 46-97页

作者： Xueyan Zhang Shichao Cheng Chuankai fu Geping yin Liguang Wang yongmin Wu Hua Huo State Key Laboratory of Space Power‑Sources School of Chemistry and Chemical EngineeringHarbin Institute of TechnologyHarbin 150001People’s Republic of China College of Chemical and Biological Engineering Zhejiang UniversityHangzhou 310058People’s Republic of China State Key Laboratory of Space Power-Sources 2965 Dongchuan RoadMinhang DistrictShanghai 200240People’s Republic of China

To address the limitations of contemporary lithium-ion batteries,particularly their low energy density and safety concerns,all-solid-state lithium batteries equipped with solid-state electrolytes have been identified as an up-and-coming *** the various SEs,organic–inorganic composite solid electrolytes(OICSEs)that combine the advantages of both polymer and inorganic materials demonstrate promising potential for large-scale ***,OICSEs still face many challenges in practical applications,such as low ionic conductivity and poor interfacial stability,which severely limit their *** review provides a comprehensive overview of recent research advancements in ***,the influence of inorganic fillers on the main functional parameters of OICSEs,including ionic conductivity,Li+transfer number,mechanical strength,electrochemical stability,electronic conductivity,and thermal stability are systematically *** lithium-ion conduction mechanism of OICSE is thoroughly analyzed and concluded from the microscopic ***,the classic inorganic filler types,including both inert and active fillers,are categorized with special emphasis on the relationship between inorganic filler structure design and the electrochemical performance of ***,the advanced characterization techniques relevant to OICSEs are summarized,and the challenges and perspectives on the future development of OICSEs are also highlighted for constructing superior ASSLBs.

关键词： Composite solid electrolytes Inorganic filler Interfacial stability Li-ion conduction mechanism Characterization techniques

STUDy ON NANOMETER ZINC PARTICLES FABRICATED By GAS EVAPORATION METHOD

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2003年第3期16卷 161-168页

作者： A.A.A.Saleh X.J.Zhai y.C.Zhai y.fu A.L.Zhang School of Materials and Metallurgy Northeastern UniversityShenyang110004ChinaSchool of Materials and MetallurgyNortheastern UniversityShenyang110004ChinaSchool of Materials and MetallurgyNortheastern UniversityShenyang110004ChinaSchool of Materials and MetallurgyNortheastern UniversityShenyang110004ChinaSchool of Materials and MetallurgyNortheastern UniversityShenyang110004China

Nanometer Zn particles with mean diameters 12-100nm made by evaporating its powders in argon gas were studied mainly by X-ray diffraction and electron microscopy. They are collected at various distances and those factors influencing the mean particle size were studied. The optimal synthetic conditions were obtained, i.e., evaporation temperature is 1200℃; argon flow rate is 0.4m3/h; amount of powder charged is 3g; distance from evaporation source is 10cm. It was found that the size of particles was governed by argon flow rate, evaporation temperature, amount of metal charged and distance from the source. The size increases remarkably with distance in the space where no metal vapor exists. This implies that the crystallites grow by coalescence. Electron micrographs and diffraction patterns are reproduced to show the size, shape and state of oxidations. Nanoparticles with definite crystal habits were sometimes observed among those with irregular ones.

关键词： gas evaporation method nanometer Zn XRD TEM

Formation,characteristics and control of sludge in Al-containing magnesium alloys:An overview

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第3期10卷 643-658页

作者： y.fu G.G.Wang A.Hu y.Li K.B.Thacker J.P.Weiler H.Hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorON N9B 3P4Canada Global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyON N7G 4H6Canada

Sludge consisting of heavy element phases and oxides is often generated during the casting operation of aluminum(Al)and magnesium(Mg)*** the help of the well-established Sludge Factor(SF)formula,it is relatively easy to control the sludge generation in aluminum *** formation mechanisms and characteristics of sludge in die casting magnesium alloys are still *** ensure the production of high quality die cast components at a low cost,a full understanding of sludge in die casting Mg alloys and its proper control measures need to be developed,since excessive sludge formation affects deleteriously material and operation cost,and casting *** the present report,the formation,characteristics and control of Mg die-casting sludge,based on the established knowledge of sludge formation and sludge factor in Al die casting alloys,are *** work on characterization and assessment of sludge in die cast Mg alloys are *** principles for control of sludge in ingot production in association with die casting of Mg alloys are *** assessment of Mg oxide and intermetallics relevant to sludge formation in Mg alloys are highlighted.

关键词： Sludge Magnesium alloys Die casting Al-Mn(-Fe)intermetallics Magnesium oxide Microstructure characterization

SyNTHESIS OF NANO-ZnO PARTICLES FOR ALUMINUM METALLURGy AS INERT ANODE MATERIAL

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2004年第1期17卷 97-106页

作者： A.A.A.Saleh y.fu X.J.Zhai y.C.Zhai M.M.Elomella A.L.Zhang School of Materials and Metallurgy Northeastern University Shenyang 110006 China

Nano-ZnO particle was produced by evaporating zinc powders in air at air flow-rate from 0.2 to 0.6m3/h. Nano-ZnO particles was formed by the oxidation of the evaporated zinc vapor. X-ray diffraction shows the powders to be ZnO with lattice parameters of a=0.3249nm and c=0.5205nm. The particle size is dependent upon the transit time from the source to the collection area. The size of particles was ranged between 81 to 103nm. The average density resulted was 4.865g/cm3. Normal ZnO and nano-ZnO were investigated to use them in aluminum metallurgy as an inert anode material. A certain amount of both oxides were molded subsequently inserted to the molten cryolite-aluminum oxide to investigate the corrosive behavior of both oxides. When the sintering temperature increased up to 1300℃, the weight loss ratio rose to 5.01%-7.33% and up to 7.67%-10.18% for nano-ZnO and normal ZnO, respectively. However, when the samples in the molten cryolite aluminum oxide were put for long time, the corrosive rate was found to be higher. It was found that the corrosive loss weight ratio of nano-ZnO anode was much lower than the normal one made from ordinary-ZnO providing that the nano-ZnO is more possible to be use inert anode material.

关键词： reactive evaporation method nano-ZnO normal ZnO XRD SEM molten electrolysis inert anode

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： y.fu G.G.Wang A.Hu y.Li K.B.Thacker J.P.Weiler H.Hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada Global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(Sy)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** Physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition Process parameter

Determining the IgG concentrations in bovine colostrum and calf sera with a novel enzymatic assay

在线全文

学校读者我要写书评

暂无评论

Journal of Animal Science and Biotechnology 2019年第1期10卷 239-247页

作者： M.Drikic C.Windeyer S.Olsen y.fu L.Doepel J.De Buck Department Production Animal Health Faculty of Veterinary MedicineUniversity of Calgary

Background: Immune protection in newborn calves relies on a combination of the timing,volume and quality of colostrum consumed by the calf after *** quality colostrum with inadequate immunoglobulin concentration contributes to failed transfer of passive immunity in calves,leading to higher calf morbidity and ***,estimating colostrum quality and ensuring the transfer of passive immunity on farm is of critical ***,there are no on-farm tools that directly measure immunoglobulin content in colostrum or *** aim of this study was to apply a novel molecular assay,split trehalase immunoglobulin G assay(STIGA),to directly estimate immunoglobulin content in dairy and beef colostrum and calf sera,and to examine its potential to be developed as on-farm *** STIGA is based on a split version of trehalase TreA,an enzyme that converts trehalose into glucose,enabling the use of a common glucometer for signal *** a first study,60 dairy and64 beef colostrum and 83 dairy and 84 beef calf sera samples were tested with STIGA,and the resulting glucose production was measured and compared with radial immunodiffusion,the standard method for measuring immunoglobulin ***: Pearson correlation coefficients between the methods were determined and the sensitivity,specificity,and accuracy of the test were calculated for different colostrum quality and failed transfer of passive immunity cut-off *** correlations of the STIGA measured by colorimetric enzymatic reaction compared to radial immunodiffusion for dairy and beef colostrum were 0.72 and 0.73,respectively,whereas the correlations for dairy and beef sera were 0.9 and 0.85,***,STIGA was tested in a blinded study with fresh colostrum and serum samples where the correlation coefficient was 0.93 and 0.94,***,the performance of STIGA followed by glucometer readings resulted in correlations with radial immunodiffusion of 0.7 and

关键词： Cattle Colostrum Immunoglobulins Passive immunity Radial immunodiffusion Split trehalase

PHOTODEGRADATION OF p-NITROCHLORBENZENE(p-NCB)USING NANOMETER-SIZED ZnO PARTICLES PREPARED By REACTIVE EVAPORATION METHOD

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2004年第2期17卷 181-188页

作者： A.A.A.Saleh X.J.Zhai y.C.Zhai y.fu M.M.Elomella School of Materials and Metallurgy,Northeastern University,Shenyang 11O006,China School of Materials and Metallurgy Northeastern UniversityShenyang 110006China

Photocatalytic degradations of p-nitrochlorbenzene (p-NCB) with distilled water wereinvestigated with ZnO crystals (catalyst) of 70nm in diameter under UV irradiation.The suitable experimental conditions are determined as: ZnO 0.25g, pH 7, p-NCBconcentration 30mg/L. These variables in terms of the degradation rate have beendiscussed, which was defined as the rate of the initial degradation to the final degrada-tion of p-NCB. When all of the experimental degradation rate values are plotted as afunction of irradiation time, all of the points appeared on a single line for wide range ofp-NCB degradations. On the basis of these results, it has been concluded that at lowerZnO catalyst amount, much of the light is transmitted through the slurry in the con-tainer beaker, while at higher catalyst amount, all the incident photons are observedby the slurry. Degradation rates of p-NCB were found to decrease with increasingsolution pH. It has been concluded that the maximum degradation rate values of p-NCB under principally the same experimental conditions mentioned above are 97.4%,98.8% and 95.5% at 100min respectively. The results suggest that the photocatalyticdegradation is initiated by an oxidation of the p-NCB through ZnO surface-adsorbedhydroxyl radicals. Absorption spectra are recorded using spectrophotometer before andafter UV-irradiation in the wavelength range 200-400nm at room temperature. Itis found that the variation of irradiation time over the range 20-100min resulted inchange in the form of the spectrum linear absorption and a higher maximum valuewill be obtained at longer irradiation time.

关键词： reactive evaporation method nano-ZnO particles pnitrochlorbenzene (p-NCB, ultraviolet light spectrophotometer catalyst

Mechanical properties of SWNT X-Junctions through molecular dynamics simulation

在线全文

学校读者我要写书评

暂无评论

International Journal of Smart and Nano Materials 2012年第1期3卷 33-46页

作者： B.A.Stormer N.M.Piper X.M.yang J.Tao y.fu M.Kirca A.C.To Department of Mechanical Engineering and Materials Science&Department of Civil and Environmental Engineering University of PittsburghPittsburghPAUSA Department of Power Engineering North China Electric Power UniversityBaoding 071003China

The mechanical behavior of seven different carbon nanotube(CNT)X-junctions with a varying number of bonds was investigated through molecular dynamics *** X-junctions are composed of two(6,0)single-walled carbon nanotubes(SWNTs)created via vibration-assisted heat *** junctions,containing anywhere between one and seven bonds,are subject to uniaxial tensile,shear and torsional strain,and then the stiffness values are determined for each *** subjected to tensile and shear strain,both the arrangement and orientation of bonds are found to affect the stiffness of junctions more substantially than the number of bonds,bond length or bond ***,anisotropic shear behavior is observed in the X-junctions,which can be attributed to the junction’s bond ***,the stiffness of X-junctions tested under an applied torque(torsion)differs from the stiffness under tensile and shear strain,however,in that it is more substantially affected by the number of bonds present in the junction than by any other property.

关键词： carbon nanotube molecular dynamics X-junction stiffness

A multi-metric approach for research evaluation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Science Bulletin 2013年第26期58卷 3288-3290页

作者： RONALD Rousseau fred y ye VIVES (Association KU Leuven) Faculty of Engineering TechnologyZeedijk 1018400 Oostende Belgium Universiteit Antwerpen (UA) IBWStadscampus Venusstraat 352000 Antwerpen Belgium KU Leuven 3000 Leuven Belgium School of Information Management Nanjing University

Background information is provided about the Web 2.0 related term altmetrics. This term is placed in the context of the broader field of informetrics. The term influmetrics is proposed as a better term for altmetrics. The importance of considering research products and not just scientific publications is highlighted. Issues related to peer review and making funding decisions within a multi-metric approach are discussed and brought in relation with the new metrics field.

关键词：评价方法度量方法背景资料 Web 上下文出版物信息