检索结果-南通市图书馆

mgO-attached graphene nanosheet(mgO@GNs)reinforced magnesium matrix nanocomposite with superior mechanical,corrosion and biological performance

引用

International Journal of minerals,metallurgy and materials 2024年第9期31卷 2062-2076页

作者： s.Abazari A.shamsipur H.R.Bakhsheshi-Rad m.s.soheilirad F.Khorashadizade s.s.mirhosseini Department of materials and metallurgical Engineering Amirkabir University of TechnologyTehran ***Iran Iranian National standards Organization of Hormozgan HormozganIran Advanced materials Research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran Department of materials and metallurgical Engineering Iran University of Science and TechnologyTehranIran

magnesium(mg)alloys are gaining great consideration as body implant materials due to their high biodegradability and ***,they suffer from low corrosion resistance and antibacterial *** this research,semi-powder metallurgy followed by hot extrusion was utilized to produce the magnesium oxide@graphene nanosheets/magnesium(mgO@GNs/mg)composite to improve mechanical,corrosion and cytocompatibility *** have revealed that the incorporation of mgO@GNs nanohybrids into mg-based composite enhanced microhardness and compressive *** vitro,osteoblast cell culture tests show that using mgO@GNs nanohybrid fillers enhances osteoblast adhesion and apatite *** presence of mgO@GNs nanoparticles in the composites decreased the opening defects,micro-cracks and micro-pores of the composites thus preventing the penetration of the corrosive solution into the *** demonstrated that the mgO@GNs/mg composite possesses excellent antibacterial properties because of the combination of the release of mgO and physical damage to bacterium membranes caused by the sharp edges of graphene nanosheets that can effectively damage the cell wall thereby facilitating penetration into the bacterial lipid ***,the mgO@GNs/mg composite with high mechanical strength,antibacterial activity and corrosion resistance is considered to be a promising material for load-bearing implant applications.

关键词： metal matrix composites mgO@GNs nanohybrid strengthening mechanisms antibacterial activity biocompatibility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Tuning structural,electrical,dielectric and magnetic properties of mg-Cu-Co ferrites via dysprosium(Dy^(3+))doping

引用

Journal of Rare Earths 2024年第1期42卷 137-146,I0005页

作者： maria Akhtar m.s.Hasan Nasir Amin N.A.morley muhammad Imran Arshad Department of Physics Government College UniversityFaisalabad38000Pakistan Department of Physics The University of Lahore53700Pakistan Department of materials science and Engineering The University of SheffieldS13JDUK Department of Physics&Astronomy University College LondonUK

In current research work,Dy3+substituted mg0.5Cu0.25Co0.25Fe2-xDyxO4(0.0≤x≤0.04 with the step interval of 0.01)soft ferrites were synthesized by the sol-gel auto combustion *** prepared samples were characterized by the techniques using X-ray diffraction(XRD),scanning electron microscopy(sEm),energy dispersive X-ray spectroscopy(EDs),Fourier transform infrared(FTIR)spectroscopy,curre nt-voltage(Ⅰ-Ⅴ)measurement,LCR meter,vibrating sample magnetometer(Vsm)and *** data reveal that the average crystallite size is 49.71 nm and the lattice constant is 0.83703 nm for sample x=*** non-uniform grain growth was demonstrated by micrographs and impurity-free elemental composition was observed from EDX *** DC resistivity has an increasing and decreasing trend in ferromagnetic and paramagnetic regions with an increase in ***,the high resistivity is observed with the order of 1010Ω·cm,and the activation energy is 0.944 eV for samples x=*** dielectric parameters including dielectric constant,dielectric losses,and impedance gradually decrease with the increase in frequency from 8 Hz to 8 *** minimum dielectric loss at high frequency is found for sample x=*** coercivity(Hc)and saturation magnetization(ms)are found in the ranges of 520.82-544.02 Oe and 20.5841-21.1473 emu/g,*** observations confirm that dysprosium(x=0.03)doped mCC-soft ferrites may be applicable in transformer cores,microwave absorbance,and telecommunication devices.

关键词： soft ferrites DC resistivity Dielectric loss Impedance Coercivity Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

microalgae cultivation in photobioreactors: sustainable solutions for a greener future

引用

Green Chemical Engineering 2024年第4期5卷 418-439页

作者： shaikh Abdur Razzak Khairul Bahar K.m.Oajedul Islam Abdul Khaleel Haniffa mohammed Omar Faruque s.m.Zakir Hossain mohammad m.Hossain Chemical Engineering Department King Fahd University of Petroleum and Minerals Center for Refining and Advanced Chemicals King Fahd University of Petroleum & Minerals Department of Chemical Engineering University of Bahrain

microalgae cultivation in photobioreactors（PBRs） has emerged as a promising and sustainable approach to address various environmental and energy challenges, offering a multitude of benefits across diverse *** developments in microalgae cultivation in photobioreactors have contributed substantially to the development and optimization of sustainable bioprocesses. This review presents a comprehensive analysis of recent innovations and breakthroughs in the field of microalgae cultivation, with a specific focus on their application in photobioreactors, aimed at paving the way for a greener future. This study in-depth examines the advantages of microalgae cultivation in photobioreactors, concentrating on its effectiveness in wastewater treatment, CO2bioremediation, and the production of biofuels and high-value products. The review evaluates the effects of light,solar irradiation, temperature, nitrogen and phosphorus concentrations in culture media, CO2concentrations, and pH on microalgae growth performance, including specific growth and biomass productivity. The study also examines open systems like unstirred ponds, raceway ponds, and circular ponds and closed systems like horizontal tubular, vertical bubble-column, airlift, flat panel, and plastic-bag photobioreactors, comparing their pros and cons. To optimize microalgae cultivation, key factors in photobioreactor design, including photosynthetic efficiencies, light/dark（L/D） cycles, CO2concentrations, mass transfer, hydrodynamics behavior, and p H, are extensively investigated. In addition, the review outlines recent developments in large-scale photobioreactors and highlights the challenges and opportunities associated with photobioreactor scale-up and design parameter optimization, including genetic engineering and economic feasibility. This article is a vital resource for researchers, engineers, and industry professionals seeking sustainable bioprocesses and the application of microalgae-based technol

关键词： microalgae biomass CO 2 biofixation Wastewater treatment Biofuel Photobioreactors

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nonlinear dynamic modeling of planar moving Timoshenko beam considering non-rigid non-elastic axial effects

引用

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 479-496页

作者： m.ABBAsI GAVARI m.R.HOmAEINEZHAD Faculty of mechanical Engineering K.N.Toosi University of TechnologyTehran 19991-43344Iran

Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible *** manipulator consists of an elastic arm,a rotary motor,and a rigid carrier,and undergoes general in-plane rigid body motion along with elastic transverse *** accurately model the elastic behavior,Timoshenko’s beam theory is used to describe the flexible arm,which accounts for rotary inertia and shear deformation *** applying Newton’s second law,the nonlinear governing equations of motion for the manipulator are derived as a coupled system of ordinary differential equations(ODEs)and partial differential equations(PDEs).Then,the assumed mode method(Amm)is used to solve this nonlinear system of governing equations with appropriate shape *** assumed modes can be obtained after solving the characteristic equation of a Timoshenko beam with clamped boundary conditions at one end and an attached mass/inertia at the *** addition,the effect of the transverse vibration of the inextensible arm on its axial behavior is *** the axial rigidity,the effect makes the rigid body dynamics invalid for the axial behavior of the ***,numerical simulations are conducted to evaluate the performance of the developed model,and the results are compared with those obtained by the finite element *** comparison confirms the validity of the proposed dynamic model for the *** to the mentioned features,this model can be reliable for investigating the system’s vibrational behavior and implementing vibration control algorithms.

关键词： planar moving Timoshenko beam non-rigid non-elastic axial effect as-sumed mode method(Amm) nonlinear motion analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

引用

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 543-562页

作者： H.m.FEIZABAD m.H.YAs Department of mechanical Engineering Razi UniversityKermanshah ***Iran

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent *** fibers are renowned for their good mechanical properties,abundance,and short cycle *** beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic *** different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the *** elastic properties of the composite are determined with the law of *** Hamilton’s principle,the governing equations of motion are *** generalized differential quadrature method(GDQm)is then applied to the equations to obtain the *** achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam ***,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber ***,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

关键词： bamboo fiber free vibration buckling analysis functionally graded(FG)beam elastic foundation generalized differential quadrature method(GDQm)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Concomitant determination of hematological indices supported the application of the albumin-bilirubin score in non-malignant liver diseases

引用

World Journal of Hepatology 2024年第9期16卷 1308-1311页

作者： marwan s m Al-Nimer Department of Pharmacology College of MedicineUniversity of DiyalaBaqubah 32001Iraq

The albumin-bilirubin(ALBI)score is a useful prognostic marker that predicts mortality in patients suffering from terminal ***,it has been reported that ALBI score is a predictor of non-malignant liver *** cutoff point of the ALBI score that distinguishes hepatocellular carcinoma from non-malignant liver disease is still not ***,the ALBI score is a sensi-tive rather than a specific predictor of the poor outcomes of liver *** are many hematological indices and ratios that are utilized as prognostic *** these biomarkers are the neutrophil-to-lymphocyte ratio,platelet-to-lymphocyte ratio(PLR),and platelet-hemoglobin ratio(PHR),which are useful discriminating prognostic biomarkers for liver diseases,e.g.,hepato-cellular carcinoma,hepatitis,liver fibrosis,*** is evidence that PLR and PHR are prognostic biomarkers that predict the poor outcomes of ***,concomitant measurements of ALBI score and PHR or ALBI score and PLR will improve the predictive value that can differentiate hepatocellular carcinoma from non-malignant diseases.

关键词： Albumin-bilirubin score Hepatocellular carcinoma Non-malignant diseases Platelet-lymphocyte ratio Platelet-hemoglobin ratio

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4si alloy

引用

International Journal of minerals,metallurgy and materials 2024年第2期31卷 362-373页

作者： F.Akbari m.Golkaram s.Beyrami G.shirazi K.mantashloo R.Taghiabadi m.saghafi Yazdi I.Ansarian Department of metallurgy and material science Imam Khomeini International University(IKIU)Qazvin ***Iran

The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4si al-loy through a high solidification cooling rate(sCR).According to the results,by increasing the sCR from 2.0 to 59.5℃/s the average size of primary si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,***-ing the sCR also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological *** instance,under the applied pressure of 0.5 mPa,an in-crease in the sCR from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,*** wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.

关键词： zinc-silicon alloy primary silicon solidification cooling rate tribology sliding wear

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fuel cell stack design and modelling with a double-stage boost converter coupled to a single-phase inverter

引用

CLEAN ENERGY 2024年第1期8卷 188-196页

作者： Elnagi, Basem E. Ismaiel, Ahmed m. mansour, Hany s. E. Abd-Alwahab, m. N. suez Canal Univ Fac Engn Elect Engn Dept Ismailia 41522 Egypt

A comprehensive proton-exchange membrane fuel cell stack model was developed and integrated with a two-stage DC/DC boost converter. It was directly coupled to a single-phase (two levels-four pulses) inverter without a transformer. The pulse-width modulation signal was used to independently regulate every converter phase. The converter was modelled using a mATLAB (R)/simulink (R) environment and an appropriate voltage control method. The analysis features of the suggested circuit were created and, through established experiments, the simulation results were verified. A single-phase (two levels-four pulses) inverter control circuit was tested and it produced a pure sinusoidal waveform with voltage control. It matches the voltage of the network in terms of amplitude and frequency. A sinusoidal pulse-width modulation approach was performed using a single-phase (two levels-four pulses) pulse-width modulation inverter. The results demonstrated an enhancement in the standard of the output wave and tuned the dead time with a reduction of 63 mu s compared with 180 mu s in conventional techniques. A comprehensive model of a proton-exchange membrane fuel cell stack is integrated with a single-phase (two levels-four pulses) inverter without a transformer. Pulse-width modulation is used to independently regulate every converter phase. As a result, the dead time is reduced compared to conventional techniques. Graphical Abstract

关键词： PEm fuel cell pulse-width modulation single-phase inverter and double-stage DC/DC boost converter PERFORmANCE sYsTEm

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

search for production of dark fermion candidates in association with heavy neutral gauge boson decaying to dimuon in proton-proton collisions at√s=8 TeV using Cms open data

引用

Chinese Physics C 2024年第4期48卷 6-13页

作者： Y.mahmoud H.Abdallah m.T.Hussein s.Elgammal Centre for theoretical physics The British University in EgyptEgypt Physics Department Faculty of ScienceCairo UniversityEgypt

In this study,we conducted a search for dark matter using a part of the data recorded by the Cms experiment during run-I of the LHC in 2012 with a center of mass energy of 8 TeV and an integrated luminosity of 11.6 fb−*** data were gathered from the Cms open *** matter,in the framework of the simplified model(mono-Z′),can be produced from proton-proton collisions in association with a new hypothetical gauge boson,Z′.Thus,the search was conducted in the dimuon plus large missing transverse momentum *** benchmark scenario of mono-Z′,which is known as light vector,was used for interpreting the Cms open *** evidence of dark matter was observed,and exclusion limits were set on the masses of dark matter and Z′at 95%confidence level.

关键词： dark matter large hadron collider Cms open data search for new physics dark fermion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cr-induced fusion reactions to synthesize superheavy elements

引用

Nuclear science and Techniques 2024年第5期35卷 122-130页

作者： s.madhu H.C.manjunatha N.sowmya B.m.Rajesh L.seenappa R.s.susheela Department of Physics R V College of EngineeringBangalore 560074India Visvesvaraya Technological University BelagaviKarnataka 590018India Department of Physics Government First Grade CollegeSrinivasapurKarnataka 563135India Department of Physics Government First Grade CollegeDevanahallyKarnataka 562110India Department of Physics Government First Grade CollegeMulbagalKarnataka 563131India Department of Physics Government First Grade collegeNanjangudOoty RoadMysore 571301India

We investigated ^(50,52-54)Cr-induced fusion reactions for the synthesis of the superheavy element in the 104≤Z≤122 *** cross sections produced in this investigation using ^(54)Cr projectiles were compared with those obtained in prior *** estimated cross sections from this analysis are consistent with the findings of prior *** the current study,the predicted cross section was found to be 42fb at 236 meV for ^(53)Cr+^(243)Am,23.2 fb at 236 meV for ^(54)Cr+^(247)Cm,95.6 fb at 240 meV for ^(53)Cr+248Bk,and 1.33 fb at 242 meV for ^(53)Cr+***,these projected cross sections with excitation energy and beam energy will be useful in future Cr-induced fusion reaction investigations.

关键词： Fusion cross sections Compound nucleus formation probability survival probability Evaporation residue cross sections

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：