检索结果-南通市图书馆

World Journal of Gastroenterology 2018年第30期24卷 3440-3447页

作者： Yan-Lei Wang Xiang zhang Jia-Jia Mao Wen-Qiang zhang Hao Dong fan-pei zhang Shuo-Hui Dong Wen-Jie zhang Yong Dai Department of Colorectal and Anal Surgery Qilu Hospital of Shandong University

AIM To introduce a novel,modified primary closure technique of laparoscopic extralevator abdominal perineal excision(LELAPE) for low rectal *** We retrospectively analyzed data from 76 patients with rectal cancer who underwent LELAPE from March 2013 to May *** were classified into the modified primary closure group(32 patients) and the biological mesh closure group(44 patients).The total operating time,reconstruction time,postoperative stay duration,total cost,postoperative complications and tumor recur-rence were *** All surgery was successfully *** pelvic reconstruction time was 14.6 ± 3.7 min for the modified primary closure group,which was significantly longer than that of the biological mesh closure group(7.2 ± 1.9 min,P < 0.001).The total operating time was not different between the two groups(236 ± 20 min vs 248 ± 43 min,P = 0.143).The postoperative hospital stay duration was 8.1 ± 1.9 d,and the total cost was 9297 ± 1260 USD for the modified primary closure ***,both of these categories were significantly lower in this group than those of the biological mesh closure group(P = 0.001 and P = 0.003,respectively).There were no differences observed between groups when comparing other perioperative data,long-term complications or oncological *** The modified primary closure method for reconstruction of the pelvic floor in LELAPE for low rectal cancer is technically feasible,safe and cost-effective.

关键词： Extralevator abdominoperineal excision Rectal cancer Pelvic floor Laparoscopy

Depression mechanism of sulfite ions on sphalerite and Pb^(2+)activated sphalerite in the flotation separation of galena from sphalerite

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 335-345页

作者： Feng zhang Chenyang zhang Linlin Wu Wei Sun Hongliang zhang Jianhua Chen Yong pei Songjiang Li Engineering Research Center of Ministry of Education for Carbon Emission Reduction in Metal Resource Exploitation and Utilization Hunan International Joint Research Center for Efficient and Clean Utilization of Critical Metal Mineral ResourcesSchool of Minerals Processing and BioengineeringCentral South UniversityChangsha 410083China State Key Laboratory of Mineral Processing Beijing General Research Institute of Mining&MetallurgyBeijing 100160China Hunan Provincial Key Laboratory of Micro&Nano Materials Interfaces Science College of Chemistry and Chemical EngineeringCentral South UniversityChangsha 410083China School of Resources Environment and MaterialsGuangxi UniversityNanning 530004China Department of Chemistry Xiangtan UniversityXiangtan 411105China China Railway Resource Group Co.Ltd Beijing 102300China

The depression mechanism of sulfite ions on sphalerite and Pb^(2+)activated sphalerite in the flotation separation of galena from sphalerite still lacked in-depth ***,the depression mechanism of sulfite ions on sphalerite and Pb^(2+)activated sphalerite in the flotation separation of galena from sphalerite was further systematically investigated with experiments and density functional theory(DFT)*** X-ray photoelectric spectroscopy(XPS)results,DFT calculation results,and frontier molecular orbital analysis indicated that sulfite ions were difficult to be adsorbed on sphalerite surface,suggesting that sulfite ions achieved depression effects on sphalerite through other non-adsorption ***,the oxygen content in the surface of sphalerite treated with sulfite ions in creased,which enhanced the hydrophilicity of the sphalerite and further increased the difference in hydrophilicity between sphalerite and ***,sulfite ions were chelated with lead ions to form PbSO_(3)in *** hydrophilic PbSO_(3)was more easily adsorbed on sphalerite than *** interaction between sulfite ions and lead ions could effectively inhibit the activation of *** addition the UV spectrum showed that after adding sulfite ions,the peak of perxanthate in the sphalerite treated xanthate solution was significantly stronger than that in the galena with xanthate solution,indicating that xanthate interacted more readily with sulfite ions and oxygen mo lecules within the sphalerite system,leading to the formation of ***,sulfite ions hardly depressed the flotation of ga lena and could promote the flotation of galena to some *** study deepened the understanding of the depression mechanism o sulfite ions on sphalerite and Pb^(2+)activated sphalerite.

关键词： sphalerite galena sulfite ion density functional theory depression mechanism

Effects of carbon content on the microstructure and tensile properties of a low-density steel

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu fan Shuyong Jiang Zhongwu zhang Key Laboratory of Superlight Materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

Dynamic behaviors of graphene platelets-reinforced metal foam piezoelectric beams with velocity feedback control

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 63-80页

作者： Jie CHEN Xinyue zhang Mingyang fan School of Mathematics Statistics and Mechanics Beijing University of Technology College of Mechanical & Energy Engineering Beijing University of Technology

Graphene platelets(GPLs)-reinforced metal foam structures enhance the mechanical properties while maintaining the lightweight characteristics of metal foams. Further bonding piezoelectric actuator and sensor layers on the surfaces of GPLs-reinforced metal foam beams enables active vibration control, greatly expanding their applications in the aerospace industry. For the first time, this paper investigates the vibration characteristics and active vibration control of GPLs-reinforced metal foam beams with surfacebonded piezoelectric layers. The constant velocity feedback scheme is used to design the closed-loop controller including piezoelectric actuators and sensors. The effects of the GPLs on the linear and nonlinear free vibrations of the beams are numerically *** Newmark-β method combined with Newton's iteration technique is used to calculate the nonlinear responses of the beams under different load forms including harmonic loads,impact loads, and moving loads. Additionally, special attention is given to the vibration reduction performance of the velocity feedback control on the responses of the beam.

关键词：

Rational modulation of fluorophosphate cathode by anionic groups to reduce the polarization behavior for fast-charging sodium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 509-521页

作者： Xinyuan Wang fan zhang Xingyu Zhou Qian Wang Changyu Liu Yangyang Liu Hui Wang Xiaojie Liu Key Laboratory of Synthetic and Natural Functional Molecule of the Ministry of Education College of Chemistry & Materials Science Northwest University

Na3V2（PO4）2O2F （VP） is recognized as a promising cathode material for sodium-ion batteries due to its stable structural framework and high specific *** functional theory （DFT） and finite element simulations show that incorporating SO42-into VP decreases its band gap,lowers the migration energy barrier,and ensures a uniform Na+concentration gradient and stress distribution during charge and discharge ***,the average Na+diffusion coefficient of Na3V2（PO4）1.95（SO4）0.05O2F（VPS-1） is roughly double that of VP,leading to enhanced rate capability (80 C,75.5 mAh g-1) and cycling stability (111.0 mAh g-1capacity after 1000 cycles at 10 C current density) for ***-1 exhibits outstanding fast-charging capabilities,achieving an 80%state of charge in just 8.1 *** assembled VPS-1//SbSn/NPC full cell demonstrated stable cycling over 200 cycles at a high 5 C current,maintaining an average coulombic efficiency of 95.35%.

关键词： Anionic group modulation Polarization behavior Fast-charging Sodium-ion battery Fluorophosphate Cathode

乳腺癌化疗前后凝血功能及血脂变化的临床观察

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

医学与哲学（B） 2016年第11期37卷 33-35页

作者：谢敬雄范培芝张超杰湖南省人民医院(湖南师范大学第一附属医院)乳腺甲状腺外科湖南长沙410005

观察乳腺癌患者化疗前后凝血常规和血脂变化,初探西黄胶囊对化疗后乳癌患者高凝状态的影响。选取湖南省人民医院2016年1月~2016年7月诊治的乳腺癌患者102例,比较化疗前、化疗后常规凝血功能的指标。（1）在乳腺癌患者化疗后均有PTA升高... 详细信息

观察乳腺癌患者化疗前后凝血常规和血脂变化,初探西黄胶囊对化疗后乳癌患者高凝状态的影响。选取湖南省人民医院2016年1月~2016年7月诊治的乳腺癌患者102例,比较化疗前、化疗后常规凝血功能的指标。（1）在乳腺癌患者化疗后均有PTA升高,PT、AF-Ⅲ的缩短,差异有统计学意义（P〈0.05）。（2）在乳腺癌患者化疗后均存在着TG、TG/CH的升高,HDL的降低,差异有统计学意义（P〈0.05）。（3）在Ⅲ期、Ⅳ期乳腺癌患者中化疗后的Fbg、TT较Ⅰ期、Ⅱ期患者化疗后升高,而APTT、HDL较Ⅰ期、Ⅱ期患者化疗后降低,差异有统计学意义（P〈0.05）。（4）乳腺癌患者化疗期间辅助服用西黄胶囊者较无服用者的PLT偏低,而HDL偏高,差异有统计学意义（P〈0.05）。乳腺癌患者化疗后体内存在着凝血功能的异常。凝血功能及血脂水平与患者临床分期密切相关,西黄胶囊可能对化疗后的乳癌患者的高凝状态有一定的改善作用。

关键词：乳腺癌化疗止凝血功能血脂西黄胶囊

在线全文

学校读者我要写书评

暂无评论

江西龙头岗铜锌矿床成矿流体研究

南京大学学报（自然科学版） 2018年第2期54卷 308-321页

作者：魏滔倪培范明森张鑫刘政内生金属矿床成矿机制研究国家重点实验室南京大学地球科学与工程学院南京210023

江西龙头岗铜锌矿床成矿过程可分为:干矽卡岩、湿矽卡岩、硫化物-石英和石英-碳酸盐阶段,铜锌矿化主要发生在硫化物-石英阶段.对不同成矿阶段的钙铁辉石和石英所进行的流体包裹体研究表明,干矽卡岩和石英-碳酸盐阶段主要发育富液相两相... 详细信息

江西龙头岗铜锌矿床成矿过程可分为:干矽卡岩、湿矽卡岩、硫化物-石英和石英-碳酸盐阶段,铜锌矿化主要发生在硫化物-石英阶段.对不同成矿阶段的钙铁辉石和石英所进行的流体包裹体研究表明,干矽卡岩和石英-碳酸盐阶段主要发育富液相两相包裹体(Ⅰ类),硫化物-石英阶段除Ⅰ类包裹体外,还发育有富气相两相(Ⅱ类)和含子晶三相包裹体(Ⅲ类).干矽卡岩阶段Ⅰ类包裹体均一温度为345℃~418℃,盐度为3.2wt.%~8.7wt.%NaCl equiv.;在硫化物-石英阶段,流体曾发生沸腾,由Ⅱ类包裹体和Ⅲ类包裹体构成的沸腾包裹体组合均一温度分别为295℃~391℃与267℃~360℃,盐度分别为0.7wt.%~3.4wt.%NaCl equiv.和31.6wt.%~38.9wt.%NaCl equiv.;石英-碳酸盐阶段Ⅰ类包裹体均一温度为234℃~274℃,盐度为0.2wt.%~2.2wt.%NaCl equiv..激光拉曼光谱分析表明:三类包裹体的气相组成均以H_2O为主,其次还含有少量的CO_2和CO.认为构造减压可能是导致流体沸腾的重要原因,成矿物质沉淀也与流体沸腾关系密切.

关键词：流体沸腾流体包裹体矽卡岩铜锌矿床龙头岗江西省

Defect Engineering:Can it Mitigate Strong Coulomb Effect of Mg^(2+)in Cathode Materials for Rechargeable Magnesium Batteries?

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 135-159页

作者： Zhengqing fan Ruimin Li Xin zhang Wanyu Zhao Zhenghui Pan Xiaowei Yang School of Chemistry and Chemical Engineering Shanghai Jiao Tong UniversityShanghai 200240People’s Republic of China School of Chemistry and Chemical Engineering Taiyuan University of TechnologyTaiyuan 030024People’s Republic of China School of Materials Science and Engineering Tongji UniversityShanghai 201804People’s Republic of China

Rechargeable magnesium batteries(RMBs)have been considered a promising“post lithium-ion battery”system to meet the rapidly increasing demand of the emerging electric vehicle and grid energy storage ***,the sluggish diffusion kinetics of bivalent Mg^(2+)in the host material,related to the strong Coulomb effect between Mg^(2+)and host anion lattices,hinders their further development toward practical *** engineering,regarded as an effective strategy to break through the slow migration puzzle,has been validated in various cathode materials for *** this review,we first thoroughly understand the intrinsic mechanism of Mg^(2+)diffusion in cathode materials,from which the key factors affecting ion diffusion are further ***,the positive effects of purposely introduced defects,including vacancy and doping,and the corresponding strategies for introducing various defects are *** applications of defect engineering in cathode materials for RMBs with advanced electrochemical properties are also ***,the existing challenges and future perspectives of defect engineering in cathode materials for the overall high-performance RMBs are described.

关键词： Rechargeable magnesium battery Sluggish diffusion kinetic Defect engineering Cathode materials Ion migration

A surface engineering strategy for the stabilization of zinc metal anodes with montmorillonite layers toward long-life rechargeable aqueous zinc ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 94-105页

作者： Wenbo Wang Ruifeng Xu Xu zhang peiyu Wang Bao Yang Bingjun Yang Juan Yang Kailimai Su Pengjun Ma Yanan Deng Xianfeng fan Wanjun Chen Key Laboratory for Electronic Materials College of Electrical Engineering Northwest Minzu University Resource Chemistry and Energy Materials Research Center State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences University of Chinese Academy of Sciences Institute for Materials and Processes School of Engineering University of Edinburgh

Rechargeable aqueous zinc-ion batteries （AZIBs） exhibit appreciable potential in the domain of electrochemical energy ***,there are serious challenges for AZIBs,for instance zinc dendrite growth,hydrogen evolution reaction （HER）,and corrosion side ***,we propose a surface engineering modification strategy for coating the montmorillonite （MMT） layer onto the surface of the Zn anode to tackle these issues,thereby achieving high cycling stability for rechargeable *** results reveal that the MMT layer on the surface of the Zn anode is able to provide ordered zincophilic channels for zinc ions migration,facilitating the reaction kinetics of zinc *** functional theory（DFT） calculations and water contact angle （CA） tests prove that MMT@Zn anode exhibits superior adsorption capacity for Zn2+and better hydrophobicity than the bare Zn anode,thereby achieving excellent cycling ***,the MMT@Zn||MMT@Zn symmetric cell holds the stable cycling over 5600 h at 0.5 mA cm-2and 0.125 m A h cm-2,even exceeding 1800 h long cycling under harsh conditions of 5 m A cm-2and 1.25 m A h *** MMT@Zn||V2O5full cell reaches over 3000 cycles at 2 A g-1with excellent rate ***,this surface engineering modification strategy for enhancing the electrochemical performance of AZIBs represents a promising application.

关键词： Surface engineering strategy Montmorillonite layer Protection mechanism of Zn anode Cycling stability Aqueous zinc ion batteries

An Unprecedented Efficiency with Approaching 21%Enabled by Additive‑Assisted Layer‑by‑Layer Processing in Organic Solar Cells

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 372-375页

作者： Shuai Xu Youdi zhang Yanna Sun pei Cheng Zhaoyang Yao Ning Li Long Ye Lijian Zuo Ke Gao Key Laboratory of Advanced Green Functional Materials College of ChemistryChangchun Normal UniversityChangchun 130032People’s Republic of China Shandong Provincial Key Laboratory for Science of Material Creation and Energy Conversion School of Chemistry and Chemical EngineeringShandong UniversityQingdao 266237People’s Republic of China College of Polymer Science and Engineering Sichuan UniversityChengdu 610065People’s Republic of China State Key Laboratory and Institute of Elemento‑Organic Chemistry Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer MaterialsRenewable Energy Conversion and Storage Center(RECAST)College of ChemistryNankai UniversityTianjin 300071People’s Republic of China Institute of Polymer Optoelectronic Materials and Devices State Key Laboratory of Luminescent Materials and Devices South China University of TechnologyGuangzhou 510640People’s Republic of China Tianjin Key Laboratory of Molecular Optoelectronic Sciences School of Materials Science and EngineeringTianjin UniversityTianjin 300350People’s Republic of China State Key Laboratory of Silicon Materials MOE Key Laboratory of Macromolecular Synthesis and FunctionalizationDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China

Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer *** optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture *** approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.

关键词： Organic solar cells Additive-assisted layer-by-layer processing Three-dimensional fibril morphology Bulk p-i-n structure Optical management