检索结果-南通市图书馆

Understanding the Recovery of the Intervertebral disc:A Comprehensive Review of In Vivo and In Vitro Studies

Journal of Bionic Engineering 2024年第4期21卷 1919-1948页

作者： faten Feki fahmi zaïri Abderrahman Tamoud melissa moulart Rym Taktak Nader Haddar fahed zaïri Sfax University ENISMaterials Engineering and Environment Laboratory3038SfaxTunisia University of Lille IMT Nord EuropeJUNIAUniversity of ArtoisULR 4515-LGCgELaboratoire de Génie Civil et geo-Environnement59000LilleFrance PrediTwins Lab 59000LilleFrance Japet medical device 59000LilleFrance Sfax University ENISLaboratory of Advanced Materials3038SfaxTunisia Ramsay Générale de Santé Hôpital PrivéLe Bois59000LilleFrance

Within the consistent daily rhythm of human life,intervertebral discs endure a variety of complex loads beyond the influences of gravity and muscle forces,leading to significant morphological changes(in terms of volume,area,and height)as well as biomechanical alterations,including an increase in disc stiffness and a decrease in intradiscal ***,the discs demonstrate an ability to regain their original morphological and biomechanical characteristics after a period of nocturnal *** preservation of normal disc function is critically dependent on this recovery phase,which serves to forestall premature disc *** phenomenon of disc recovery has been extensively documented through numerous in vivo studies employing advanced clinical techniques such as magnetic Resonance Imaging(mRI),stadiometry,and intradiscal pressure ***,the findings from in vitro studies present a more complex picture,with reports varying between full recovery and only partial recuperation of the disc ***,research focusing on degenerated discs in vitro has shed light on the quantifiable impact of degeneration on the disc ability to *** dynamics within the disc are considered a primary factor in recovery,yet the disc intricate multiscale structure and its viscoelastic properties also play key *** elements interact in complex ways to influence the recovery mechanism,particularly in relation to the overall health of the *** objective of this review is to collate,analyze,and critically evaluate the existing body of in vivo and in vitro research on this topic,providing a comprehensive understanding of disc recovery *** understanding offers a blueprint for future advancements in medical treatments and bionic engineering solutions designed to mimic,support,and enhance the natural recovery processes of intervertebral discs.

关键词： Intervertebral disc Recovery In vivo vs.in vitro studies degeneration Viscoelastic effects Fluid dynamics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimal combination of the correction model and parameters for the precision geometric correction of UAV hyperspectral images

引用

International Journal of Agricultural and Biological Engineering 2024年第3期17卷 173-184页

作者： Wenzhong Tian za Kan Qingzhan Zhao Ping Jiang Xuewen Wang Hanqing Liu College of mechanical and Electrical Engineering Shihezi UniversityShihezi 832000XinjiangChina Research Center for Space Information Engineering Technology Shihezi 832000XinjiangChina XPCC division of National Remote Sensing Center of China Shihezi 832000XinjiangChina College of Information Science and Technology Shihezi UniversityShihezi 832000XinjiangChina

Nowadays,with the rapid development of quantitative remote sensing represented by high-resolution UAV hyperspectral remote sensing observation technology,people have put forward higher requirements for the rapid preprocessing and geometric correction accuracy of hyperspectral *** optimal geometric correction model and parameter combination of UAV hyperspectral images need to be determined to reduce unnecessary waste of time in the preprocessing and provide high-precision data support for the application of UAV hyperspectral *** this study,the geometric correction accuracy under various geometric correction models(including affine transformation model,local triangulation model,polynomial model,direct linear transformation model,and rational function model)and resampling methods(including nearest neighbor resampling method,bilinear interpolation resampling method,and cubic convolution resampling method)were ***,the distribution,number,and accuracy of control points were analyzed based on the control variable method,and precise ground control points(GCPs)were *** results showed that the average geometric positioning error of UAV hyperspectral images(at 80 m altitude AGL)without geometric correction was as high as 3.4041 m(about 65 pixels).The optimal geometric correction model and parameter combination of the UAV hyperspectral image(at 80 m altitude AGL)used a local triangulation model,adopted a bilinear interpolation resampling method,and selected 12 edgemiddle distributed *** correction accuracy could reach 0.0493 m(less than one pixel).This study provides a reference for the geometric correction of UAV hyperspectral images.

关键词： geometric correction hyperspectral images unmanned aerial vehicle(UAV) ground control point(GCP)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

design and optimization of an airflow-vibration sieving device for the effective cleaning of cyperus esculentus *** mixture

引用

International Journal of Agricultural and Biological Engineering 2024年第4期17卷 77-88页

作者： Shan Chen Shiguan An za Kan Lidong Huang Hewei meng Jiangtao Qi Huijie Peng College of mechanical and Electrical Engineering Shihezi UniversityShihezi 832000XinjiangChina Engineering Research Center for Production mechanization of Oasis Special Economic Crop Ministry of EducationShihezi 832000XinjiangChina Guilin mike machinery Co. LtdGuilin 541000GuangxiChina

The threshing mixture of Cyperus esculentus(Tiger nut)planted in sandy areas is complex during harvesting,and there are problems of high impurity rate and high cleaning loss rate of the *** this paper,the threshing mixture of Cyperus esculentus is taken as the research object,and the suspension speed of each component is measured to design an“airflow+vibration”sieving *** the vector polygon method to explore the law of motion of the vibrating sieve,establish the force model of the seeds on the sieve surface,and analyze the conditions for the seeds to penetrate the *** to the principle of seeds penetrating the sieve and long stalks not penetrating the sieve,the geometric model of sieve blades opening degree adjustment mechanism is *** of the conditions under which long stalks can be thrown out of the *** experiment bench of the cleaning device was built,and the evaluation indexes were the rate of seed impurity and the rate of cleaning loss of the device,and the crank speed,sieve blades opening degree and fan speed were used as the experiment factors to study the influence law of each influencing factor on the evaluation index through single-factor *** response surface methodology to find the optimal combination of working parameters of the cleaning *** verify the device’s application on the combine harvester to improve the effectiveness of the cleaning operation of the Cyperus esculentus combine harvester.

关键词： sand cultivation Cyperus esculentus wind sieve type cleaning device optimization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Influence of microorganisms Effective against Basal Rot and on Agronomic Parameters of Onion [Allium cepa L. (Amaryllidaceae)]

引用

Journal of Agricultural Chemistry and Environment 2024年第3期13卷 282-299页

作者： Henriette doukahonon Guigui Bi zaï Pacôme zaouli Alain Serge Coulibaly Juliette Ky dedi Training and Research Unit of Sciences of Nature Laboratory of Biology and Improvement of Plant Production Nangui Abrogoua University Abidjan Cte dIvoire department of Plant Biology Training and Research Unit (UFR) of Biological Sciences Peleforo Gon Coulibaly University Korhogo Cte dIvoire

Onions are a horticultural crop of great economic, dietary and medicinal importance, and are highly prized by the Ivorian population. However, production remains low, due to a number of constraints, including parasitic attacks. The most frequent is fusariosis caused by Fusarium sp., a pathogen that causes enormous damage to onion crops. faced with these attacks, chemical control appears to be ineffective, with consequences for human health and the environment. This is why the search for effective alternative methods that respect the environment and human health is so necessary. It is in this context that this study was carried out, with the general aim of controlling fusarium wilt in onion crops, with a view to improving onion production in Ivory Coast through the use of effective microorganisms. The experimental set-up used for this purpose was a fisher block with complete randomization, comprising three replicates. A fungal spore concentration of 106 spore/mL of Fusarium sp., three doses (1%;2.5% and 5% v/v) of Em and one dose of a chemical fungicide (30 mL/16L) were tested on young onion plants. Each block consisted of nine sub-plots with nine treatments. Health parameters (incidence and severity) and agronomic parameters (growth and yield) were assessed. microbiological analysis of the Em revealed the presence of nine morphotypes of Trichoderma sp., Aspergillus clavatus, Aspergillus flavus, Aspergillus sp., Penicillium sp., Rhizopus sp., lactic acid bacteria of the Bacillus family and the yeast Saccharomyces cerevisiae. Field experimentation showed that the 5% Em microbial solution reduced the incidence and severity of fusariosis compared with the chemical fungicide, and proved to be the best. This dose reduced yield losses by 7.14%, while improving onion growth and yield by over 5%. The results demonstrated the ability of the Em solution to effectively control the causal agent of basal rot in onion crops.

关键词： Basal Rot Effective microorganisms (Em) Fusarium sp. Onion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparative analysis of microstructure,mechanical,and corrosion properties of biodegradable mg-3Y alloy prepared by selective laser melting and spark plasma sintering

引用

Journal of magnesium and Alloys 2024年第4期12卷 1496-1510页

作者： P.minárik m.Zemková S.Šašek J.dittrich m.Knapek F.Lukáˇc d.Koutný J.Jaroš R.Král faculty of mathematics and Physics Charles UniversityKe Karlovu 5Praha 12116Czech Republic Research Centre University ofŽilinaUniverzitná8215/1Žilina 01026Slovakia Institute of Plasma Physics of the Czech Academy of Sciences Za Slovankou 1782/318200 Praha 8Czech Republic Institute of machine and Industrial design Brno University of TechnologyTechnická2896/2Brno 61669Czech Republic

This work explored possibilities of biodegradable magnesium alloy mg-3Y preparation by two modern powder metallurgy techniques–spark plasma sintering(SPS)and selective laser melting(SLm).The powder material was consolidated by both methods utilising optimised parameters,which led to very low porosity(∼0.3%)in the SLm material and unmeasurably low porosity in the SPS *** main aim of the study was the thorough microstructure characterisation and interrelation between the microstructure and the functional properties,such as mechanical strength,deformability,and corrosion *** materials showed comparable strength of∼110 mPa in tension and compression and relatively good deformability of∼9%and∼21%for the SLm and SPS materials,*** corrosion resistance of the SPS material in 0.1 m NaCl solution was superior to the SLm one and comparable to the conventional extruded *** digital image correlation during loading and the cross-section analysis of the corrosion layers revealed that the residual porosity and large strained grains have the dominant negative effect on the functional properties of the SLm *** the other hand,one of the primary outcomes of this study is that the SPS consolidation method is very effective in the preparation of the W3 biodegradable alloy,resulting in material with convenient mechanical and degradation properties that might find practical applications.

关键词： magnesium Yttrium Powder metallurgy microstructure mechanical strength Corrosion resistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

determinants of Satisfaction at Work and Its Reflections on Performance

引用

Chinese Business Review 2024年第1期23卷 24-36页

作者： Giovani Luiz Garcia Costantini Everton Anger Cavalheiro Larissa medianeira Bolzan Alejandro martins Rodrigues Luíza Roloff falck Federal University of Pelotas PelotasBrazil

This study examines the relationship between job satisfaction and performance,investigating personality traits and satisfaction aspects among employees of a Federal Higher Education Institution.A questionnaire was administered to 658 participants,using structural equation modeling for *** highlighted that challenging work,neuroticism,and self-esteem significantly influenced overall workplace satisfaction,while general satisfaction,self-efficacy,and lack of attention were key determinants of work *** emphasizes the importance for managers to prioritize factors enhancing employee satisfaction,as it positively correlates with job performance.

关键词： satisfaction at work work performance personality traits facets of job satisfaction Federal Higher Education Institution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

引用

Journal of materials Science & Technology 2022年第1期96卷 248-261页

作者： Seyedmohammad Tabaie farhad Rézaï-Aria Bertrand C.d.Flipo mohammad Jahazi department of mechanical Engineering École de Technologie Supérieure(ÉTS)H3C 1K3 MontrealQCCanada Institut Clément Ader(ICA) Universitéde ToulouseCNRSIMT Mines AlbiINSAUPSISAECampus Jarlard81013 AlbiFrance TWI Ltd Granta ParkGreat AbingtonCambridge CB216ALUnited Kingdom

The continuous growth in the manufacture of aerospace components such as blisks has led to an increase in the application of different hybrid materials fabricating methods,and thus the requirements for joining and strengthening of dissimilar *** to this goal,selective laser melted(SLm)Inconel718 was joined with forged Ad730^(Tm)Nickel-based superalloy through linear friction welding(LFW)in this *** variation,specifically with respect to secondary phases precipitation was *** microhardness and strengthening mechanisms of the weldment were also *** precipitation(volume fraction and size of particles)at different regions of both sides of the weld line was *** to the weld line,the dissolution ofγ’/γ"and Laves phases and grain refinement occurred which reveals the effects of both compression strain and high temperature on recrystallization and high degree of elemental diffusion in the weld zone(WZ).It is shown that the size,volume fraction,and shape of secondary phases increased and changed(from spherical to long-striped for Laves particles)as we went from the WZ toward the base ***,the measured microhardness indicated that the strength of Ad730^(Tm)alloy depends significantly on the grain size,while strength in SLm Inconel 718 was dominated by shape(or size)and the presence of secondary phases(γ’/γ"and Laves).

关键词： Additive manufacturing Linear friction welding Ni-based superalloy Precipitation microhardness Strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of recycled polyethylene terephthalate fibres on plastic shrinkage and mechanical properties of concrete

引用

Frontiers of Structural and Civil Engineering 2022年第6期16卷 792-802页

作者： NecatÖzaŞIK Özgür EREN department of Civil Engineering Eastern Mediterranean UniversityMersin 99628Turkey

Polyethylene terephthalate bottles production has drastically increased year after year due to high versatility of polyethylene terephthalate plastics and considerable consumption of *** tandem with that increase,the major concern of society has been the improper disposal of this non-biodegradable material to the *** deal with this concern,recycled polyethylene terephthalate bottles were incorporated in concrete as fibre reinforcements in this *** objective of this research is to evaluate the mechanical properties of recycled polyethylene terephthalate fibre reinforced concrete(RPFRC)in comparison with control concrete without *** terephthalate fibres with three different diameters(0.45,0.65,and 1.0 mm)and two lengths(20 and 30 mm)were added at various proportions(0.5%,1.0%,1.5%and 2.0%)by volume of concrete in order to determine the effect of fibres initially on compressive,flexural and splitting tensile strengths of *** results revealed that none of the fibres have detrimental effects up to 1%volume fraction,however further addition caused slight reductions on mechanical properties in some *** shrinkage resistance and impact resistance tests were also performed according to related *** terephthalate fibres were observed to have marked improvements on those *** a good performance could be attributed primarily to the bridging effect of fibres.

关键词： recycled PET fibre-reinforced concrete mechanical properties plastic shrinkage impact energy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

三轴形变核^(131)Ba中的奇异集体激发模式

引用

物理学报 2024年第11期73卷 89-100页

作者：韦锐周厚兵王思成丁兵强赟华贾晨旭陈红星郭松 C.m.Petrache d.mengoni A.Astier E.dupont 吕冰锋 d.Bazzacco A.Boso A.Goasduff F.Recchia d.Testov F.Galtarossa G.Jaworski d.R.Napoli S.Riccetto m.Siciliano J.J.Valiente-dobon C.Andreoiu F.H.Garcia K.Ortner K.Whitmore A.Ataç-Nyberg T.Bäck B.Cederwall E.A.Lawrie I.Kuti d.Sohler T.marchlewski J.Srebrny A.Tucholski 广西师范大学物理科学与技术学院桂林541004 广西核物理与核技术重点实验室桂林541004 中国科学院近代物理研究所兰州730000 中国科学院大学北京100049 巴黎萨克雷大学 CNRS/IN2P3IJCLab奥赛91405 帕多瓦大学物理和天文学系帕多瓦I-35131 意大利国家核物理研究所帕多瓦分部帕多瓦I-35131 意大利国家核物理研究所莱尼亚罗国家实验室莱尼亚罗(帕多瓦)I-35020 费拉拉大学理学与自然科学院费拉拉西蒙菲莎大学化学系本拿比BC V5A 1S6 皇家理工学院物理系斯德哥摩尔S-10691 国家研究基金会iThemba加速器科学实验室西萨默塞特7123 西开普大学物理与天文系贝尔维尔ZA-7535 HUN-REN原子核研究所德布勒森4001 华沙巴斯德拉大学重离子实验室华沙02-093

利用意大利Legnaro实验室串列静电加速器提供的65 meV^(13)C束流与122Sn靶的熔合蒸发反应布居了^(131)Ba的高自旋态,并搭建了新的能级纲图.新的能级纲图由15条转动带组成,包括三对手征双重带,其中两对正宇称手征带为赝自旋-手征四重带.... 详细信息

利用意大利Legnaro实验室串列静电加速器提供的65 meV^(13)C束流与122Sn靶的熔合蒸发反应布居了^(131)Ba的高自旋态,并搭建了新的能级纲图.新的能级纲图由15条转动带组成,包括三对手征双重带,其中两对正宇称手征带为赝自旋-手征四重带.正负宇称手征带通过一系列增强的E1跃迁连接,表明它们之间存在八极关联.在低自旋区域搭建了一条新的转动带,通过一系列γ跃迁向νh1_(1/2)晕带退激.这种能级结构与摇摆带相似,但基于现有的实验证据还难以将它确认为摇摆带,不能排除其他集体激发机制,如γ振动的影响.

关键词：高自旋态手征带赝自旋八极关联摇摆运动

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

mapuche People:Valuing a Colonial Past in the Official Primary History Textbook from an Intermodal Perspective of Historical Sources

引用

外国语 2021年第1期44卷 41-63页

作者： Teresa Oteíza Pontifical Catholic University of Chile SantiagoChile

This article explores from an intermodal perspective how visual and verbal historical documents contribute to the construction of value positions regarding the mapuche people during colonial and early republican times in the latest official 5 thgrade primary Chilean History *** study analyzes,in particular,the visual and verbal historical secondary sources that build in combination evaluative prosodies that in turn contribute to construct determinate ideological perspectives regarding mapuche *** discourse analysis takes a social and ideological intermodal approach(Oteíza&Pinuer 2016,2019)focusing on an appraisal analysis(martin&White 2005;martin2014;Hood 2010;Oteíza&Pinuer 2012,2019)informed by socio-semiotic and Systemic Functional Linguistics *** cumulative intersemiotic reading of symbolic images and written documents privileges evaluative prosodies of negative integrity and of high conflict,in which mapuche people are represented with more agency than Hispanics,emphasizing the stereotype of indigenous people as foreign,exotic and brave warriors,but also as violent,primitive and savage people that have had resisted Hispanic desires of slavering and cultural *** secondary sources offer alternative historical interpretations,although mainly constructed by evoked evaluations that could be less evident to children.

关键词： appraisal analysis intermodal analysis historical evidence History textbooks mapuche people

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：