检索结果-南通市图书馆

Enhanced Grain Refining Effect of Mg–Zr Master Alloy on Magnesium Alloys via a Synergistic Strategy Involving Heterogeneous Nucleation and Solute‑Driven Growth Restriction

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1354-1366页

作者： Gang Zeng Hong Liu Jing‑Peng Xiong jian‑Long Li yong Liu Key Laboratory of Lightweight and High Strength Structural Materials of jiangxi Province School of Advanced ManufacturingNanchang UniversityNanchang 330031China

Zirconium(Zr)emerges as the most effective grain refiner for magnesium(Mg)alloys incorporating ***,Zr is introduced in the form of an Mg–Zr master ***,within Mg–Zr master alloys,Zr predominantly exists in a particle form,which tends to aggregate due to attractive van der Waals *** clustered Zr is prone to settling,thereby reducing its refining impact on Mg *** this work,a combined pretreatment process for Mg–Zr master alloys was proposed,encompassing the introduction of a physical field to intervene the agglomeration of particle Zr and the employ of high-temperature dissolution and peritectic reactions to promote the solid solution of *** results demonstrate that the particle Zr within the pretreated Mg–Zr master alloy is effectively dispersed and refined,and greater solute Zr levels can be *** subsequent grain refinement ability was studied on a typical Mg–6Zn–0.6Zr(wt%)*** outcome highlights that an improvement in the grain refinement efficacy(32.4%)of Mg–Zr master alloys was obtained with a holding time of 60 *** pretreated Mg–Zr master alloy significantly augments the efficiency of grain refinement for Mg alloys through a synergistic strategy involving heterogeneous nucleation and solute-driven growth *** crucial factor in achieving effective grain refinement of Zr in Mg alloys lies in regulating the presence and morphology of Zr in the Mg–Zr master alloy,distinguishing between particle Zr and solute *** study introduces a novel method for developing more efficient Mg–Zr refiners.

关键词： Magnesium alloy Mg-Zr master alloy Grain refinement Heterogeneous nucleation Solute-driven growth restriction Synergistic strategy

Multi-carrier Tb/s silicon photonic coherent receiver

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第1期67卷 284-291页

作者： Zhen WANG Xingfeng LI Jingchi LI jian SHEN yong ZHANG Yikai SU State Key Lab of Advanced Optical Communication Systems and Networks Department of Electronic EngineeringShanghai Jiao Tong University

We propose a silicon polarization-diversity coherent receiver for wavelength-multiplexing transmission without using the large-footprint arrayed waveguide grating(AWG).We have integrated our proposed coherent receiver on the silicon-on-insulator(SOI) platform for high-capacity *** the proposed coherent receiver,high-frequency photocurrent signals from other wavelengths are suppressed by electrical low-pass ***,the signal-signal beat interference(SSBI) generated from each wavelength is eliminated by the balanced *** two features lend to the proposed coherent receiver being free of the mm-scale *** have demonstrated our proposed coherent receiver to detect a 1.12-Tb/s wavelength-division-multiplexed and polarization-division-multiplexed 16-ary quadrature amplitude modulation(PDM-16-QAM) *** compact footprint of the silicon chip promises small-form-factor receivers for future ultra-high-capacity coherent communication systems that require a high integration level and low fabrication cost.

关键词： silicon photonics optical receivers coherent communication wavelength-division-multiplexing (WDM) polarization-division-multiplexing (PDM)

Metal-to-insulator transition in platinum group compounds

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3460-3474页

作者： Yu-Xuan Xia jian-Gang He Nuo-fu Chen Ji-Kun Chen School of New Energy North China Electric Power UniversityBeijing102206China School of Mathematics and Physics University of Science and Technology BeijingBeijing 100083China Key Laboratory of Advanced Materials and Devices for PostMoore Chips(Ministry of Education) School of Materials Science and EngineeringJniversity of Science and Technology BeijingBeijing 100083China

The metal-to-insulator transition(MIT) as usually achieved in 3d-orbital transitional metal(TM) compounds opens up a new paradigm in correlated electronics via triggering abrupt variations in their transportation *** to such 3d-orbital TM compounds,the MIT within the platinum group(Pg) element compounds based on the 4d-and 5d-orbital configurations is more complicated,owing to their elevation in the spinorbit coupling and meanwhile weakened intra-atomic Coulomb *** brings in a new freedom to regulate the balance in their metallic or semiconductive orbital configurations,while their MIT properties can be potentially combined with their spintronic properties to enable new electronic ***,we review the electronic transport and MIT behaviors within the existing family of Pg-containing compounds,particularly those showing first-order MIT behaviors that can be useful in correlated *** is also hoped that summarizing the presently reported Pg-containing MIT compounds will lead to the discovery of more new material families and/or new mechanisms associated with the Pg-containing compounds showing MIT properties.

关键词： Metal-to-insulator transition Platinum group compounds Electron correlation Spin-orbital coupling

MiR-107-3p/Atp6v0e1 contributes to protective effects of two selenium-containing peptides,TSeMMM and SeMDPGQQ on lead-induced neurotoxicity

在线全文

学校读者我要写书评

暂无评论

Food Science and Human Wellness 2024年第4期13卷 2060-2067页

作者： yong Fang Tianhang Huang jian Wu Xieqi Luo Fengjiao Fan Peng Li jian Ding Xinyang Sun College of Food Science and Engineering Nanjing University of Finance and Economics/Collaborative Innovation Center for Modern Grain Circulation and SafetyNanjing 210023China Laboratory of Neurodegenerative and Neuroinjury Diseases Wuxi School of MedicineJiangnan UniversityWuxi 214122China

Two selenium(Se)-containing peptides from Se-enriched rice,TSeMMM and SeMDPGQQ,possess neuroprotective potency against lead(Pb2+)-induced ***,the crosstalk between mRNA and microRNAs(miRNA)involved in the neuroprotection mechanism remains to be *** this study,RNA-sequencing and miRNA-sequencing were used to independently identify differentially expressed mRNAs and small RNAs profiles in Pb^(2+)-treated primary fetal rat cortical neurons and then the correlated miRNA-mRNA target pairs were *** was found that 34 mRNAs related to oxidative phosphorylation could be reversed by pretreatment of TSeMMM and *** protective effect of TSeMMM and SeMDPGQQ was mediated by upregulation of miR-107-3p,which downregulates the ATPase H+transporting V0 subunit e1(Atp6v0e1)mRNA level.A zebrafish model was applied to verify the relevance between the targeted mRNA and miRNA by real-time quantitative *** results indicated that miR-107-3p was a potential therapeutic target to achieve neuroprotection of Se-containing peptides via stimulation of Atp6v0e1.

关键词： Lead Se-containing peptides Neuroprotection miRNA

Hot Compression Behavior and Tensile Property of a Novel Ni-Co-Based Superalloy Prepared by Electron Beam Smelting Layered Solidification Technology

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 283-292页

作者： yong-Chao Gai Rui Zhang Chuan-yong Cui Zi-jian Zhou Yi Tan Yi-Zhou Zhou Xiao-Feng Sun Key Laboratory of Materials Modification by Laser Ionand Electron Beams(Ministry of Education)School of Materials Science and EngineeringDalian University of TechnologyDalian116024China Shi-Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang110016China

The hot compression behavior and tensile strength after compression of a new Ni-Co-based superalloy produced using electron beam smelting layered(EBSL)solidification technology were *** compression tests were performed at temperatures of 1120℃and 1150℃,with strain rates of 1 s^(-1) and 0.01 s^(-1),reaching a true strain of *** strength was evaluated at room *** results revealed that this EBSL technology accelerates dynamic recrystallization(DRX),without compromising the strength of alloy.A significant correlation between the volume fraction of DRX and the strain rate was observed,with higher fractions at lower strain rates,leading to higher tensile ***,at the same strain rate,the specimens compressed at 1120℃exhibited higher tensile strength due to undissolvedγ′*** solution and aging heat treatment,the alloy maintained high tensile *** results suggested that the EBSL Ni-Co-based superalloy offers excellent prospects for practical applications.

关键词： Ni-Co-based superalloy Hot deformation Electron beam smelting Tensile strength

Charge-controlled compositional/microstructural regulations and electrochemical actuation performance of bulk nanoporous Ni-Pd alloys

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 5305-5317页

作者： fu-Quan Tan Qing-Guo Bai Bin Yu jian-Feng Wang Zhong-Hua Zhang Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education) School of Materials Science and EngineeringShandong University School of Applied Physics and Materials Wuyi University Ira A.fulton School of Engineering Arizona State University

Bulk nanoporous （np） metallic actuators have attracted increasing attention due to their large strain and low stimulation ***,studies focusing upon the combined effect of composition and structure on the actuation performance of metallic actuators are relatively scarce,and its underlying mechanism needs to be clarified Herein,a series of bulk np-NiPd samples with differen compositions and microstructures were fabricated using a dealloying-coarsening-dealloying strategy and chargecontrolled electrochemical dealloying,and the process involves only one component of precursor *** has been found that the np-NiPd cubes show a composition/structure-dependent mechanical property and electrochemical actuation ***,the npNi70Pd30sample with a homogeneously porous structure and good network connectivity exhibits significantly larger strain amplitude and faster strain rate than other hierarchically porous NiPd samples (np-Ni50Pd50and npNi20Pd80).Moreover,the np-Ni70Pd30sample demonstrates good actuation stability with high strain retention after hundreds of ***,the maximum strain amplitude （1.17%） is even comparable to that of advanced leadfree piezoceramic,and the maximum strain rate exceeds those of many reported metallic actuator *** work indicates that good network connectivity plays a vita role in facilitating large/fast strain response in metallic actuators.

关键词： Actuation stability Bulk nanoporous NiPd Electrochemical dealloying Good network connectivity Metallic actuators

Secure symbol level precoding for cell-free network based on band-region constraint of the eavesdropper’s receiving signal

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High Technology Letters 2024年第3期30卷 304-309页

作者： LI Zewen JIN yong fu Chunling PENG Xin HU Zhentao School of Artifical Intelligence Henan UniversityZhengzhou 450000P.R.China School of Physics and Electronics Henan UniversityKaifeng 475000P.R.China

A symbol level secure precoding scheme based on band-region constraint of the eavesdropper’s receiving signal is proposed to enhance the energy efficiency of cell-free multiple-input multiple-output(MIMO)networks in the presence of an eavesdropper while guaranteeing the quality of service(QoS)of user and the security of ***,to lighten its high computational complexity,original problem is divided into several cascade sub-problems firstly,and then those sub-problems are handled by combining Lagrangian dual function and improved Hooke-Jeeves method *** ex-periment with other secure symbol-level precoding schemes demonstrate that proposed scheme can achieve the lower power consumption with almost same symbol error rate and QoS of user.

关键词： cell-free symbol-level precoding(SLP) physical layer security(PLS) multi-ple-input multiple-output(MIMO) band-region constraint

Quantitative characterizations of anisotropic dynamic properties in organic-rich shale with different kerogen content

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 855-865页

作者： jian-yong Xie Yan-Ping Fang Xing-Hua Wu jian'er Zhao Jun-Cheng Dai Jun-Xing Cao Ji-Xin Deng State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Chengdu University of TechnologyChengdu610059SichuanChina Key Lab of Earth Exploration&Information Techniques of Ministry of Education Geophysical InstituteChengdu University of TechnologyChengdu610059SichuanChina PetroChina Southwest Oil&Gasfield Company Chengdu610017SichuanChina

Understanding the quantitative responses of anisotropic dynamic properties in organic-rich shale with different kerogen content(KC)is of great significance in hydrocarbon exploration and *** controlled experiments with a single variable is challenging for natural shales due to their high variations in components,diagenesis conditions,or pore *** employed the hot-pressing technique to construct 11 well-controlled artificial shale with varying *** artificial shale samples were successive machined into prismatic shape for ultrasonic measurements along different *** revealed bedding perpendicular P-wave velocities are more sensitive to the increasing KC than bedding paralleling velocities due to the preferential alignments of *** elastic stiffnesses except C_(13)are generally decreasing with the increasing KC,the variation of C_(1) and C_(33)on kerogen content are more sensitive than those of C_(44)and C_(66).Apparent dynamic mechanical parameters(v and E)were found to have linear correlation with the true ones from complete anisotropic equations independent of KC,which hold value towards the interpretation of well logs consistently across formations,Anisotropic mechanical parameters(ΔE and brittlenessΔB)tend to decrease with the reducing KC,withΔB showing great sensitivity to KC *** the range of low KC(10%)shale,compilation of data from natural organic rich-shales globally verified the similar systematic relationships that can be empirically used to predict the fraction of KC in shales.

关键词： Elastic properties Organic shale Anisotropy Kerogen content Physical modeling

Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1692-1703页

作者： Xue-jian Zhang Guang-wei Yang yong Wan yong-hong Wen Chuan-sheng Tang Ming-qi Liu Li-jie Tian Key Laboratory of Metallurgical Emission Reduction and Resources Recycling Anhui University of TechnologyMa'anshan 243002AnhuiChina School of Metallurgical Engineering Anhui University of TechnologyMa'anshan 243002AnhuiChina Baosteel Central Research Institute Baoshan Iron and Steel Co.Ltd.Shanghai 201999China

Metallographic microscopy,scanning electron microscopy and TiN growth thermodynamic and kinetic equations were used to investigate the morphology,quantity,and size of TiN in the center of high-titanium high-strength steels under different solidification cooling *** results showed that TiN in the center of the experimental steels mainly existed in three forms:single,composite(Al2O3-TiN),and multi-particle *** began precipitating at around 1497℃(solidification fraction of 0.74).From the end of melting to solidification for 180 s,the cooling rates in the center of the experimental steels for furnace cooling,air cooling,refractory mold cooling,and cast iron mold cooling tended to stabilize at 0.17,0.93,1.65,and 2.15℃/s,*** size of TiN in the center of the experimental steel cooled using furnace cooling was mainly concentrated in the 5-15 pm *** contrast,the size of TiN in the center of the experimental steels cooled using air cooling,refractory mold cooling,and cast iron mold cooling were mainly concentrated in the 1-5 pm *** addition,their density of TiN in the center of the experimental steels is signif-icantly higher than that of the furnace-cooled experimental *** and kinetic precipitation models of TiN established predicted the growth size of TiN in a high-titanium high-strength steel when the solidification cooling rates are not below 0.93℃/s.

关键词： High-titanium steel Cooling method TiN Thermodynamics Kinetics