检索结果-南通市图书馆

Inflow and outflow permeability tests in a very soft clay under low stresses

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第8期16卷 3270-3283页

作者： J.w.S.Vargas f.A.B.Danziger f.R.Lopes T.Lunne federal University of Rio de Janeiro Rio de JaneiroBrazil Norwegian Geotechnical Institute OsloNorway

In situ inflow and outflow permeability tests with the BAT probe at SarapuíII soft clay test site are presented.A description of the BAT permeability test is provided,discussing its advantages and shortcomings,especially in the case of very soft clays under low *** pressures were monitored during probe installation and were found to be slightly lower than piezocone u2 pore pressures,consistent with the position of the *** role of filter tip saturation was investigated after the usual saturation procedure provided an unsatisfactory pore pressure response during probe *** show that the vacuum saturation procedure provides adequate response during installation and increases the reliability of the coefficient of permeability determination in early *** inflow and outflow tests yielded similar results,indicating that careful execution of the test can lead to good test repeatability regardless of the loading *** sequences of alternated inflow and outflow tests have yielded similar results,indicating that soil reconsolidation and filter clogging were negligible in the tests *** are presented concerning the relationship between index parameters and the in situ coefficient of permeability for SarapuíII clay,which plot outside the range of existing databases.

关键词： Permeability test Soft clay BAT probe Inflow and outflow tests

Effects of dust controls on respirable coal mine dust composition and particle sizes:case studies on auxiliary scrubbers and canopy air curtain

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第3期11卷 86-101页

作者： f.Animah C.Keles w.R.Reed E.Sarver Department of Mining and Minerals Engineering Virginia Polytechnic Institute&State UniversityBlacksburgVAUSA National Institute of Occupational Safety and Health(NIOSH) PittsburghPAUSA

Control of dust in underground coal mines is critical for mitigating both safety and health *** decades,the National Institute of Occupational Safety and Health(NIOSH)has led research to evaluate the effectiveness of various dust control technologies in coal *** studies have included the evaluation of auxiliary scrubbers to reduce respirable dust downstream of active mining and the use of canopy air curtains(CACs)to reduce respirable dust in key operator *** detailed dust characterization was not a focus of such studies,this is a growing area of *** preserved filter samples from three previous NIOSH studies,the current work aims to explore the effect of two different scrubbers(one wet and one dry)and a roof bolter CAC on respirable dust composition and particle size *** this,the preserved filter samples were analyzed by thermogravimetric analysis and/or scanning electron microscopy with energy dispersive *** indicate that dust composition was not appreciably affected by either scrubber or the ***,the wet scrubber and CAC appeared to decrease the overall particle size *** an effect of the dry scrubber was not consistently observed,but this is probably related to the particular sampling location downstream of the scrubber which allowed for significant mixing of the scrubber exhaust and other return *** from the insights gained with respect to the three specific dust control case studies revisited here,this work demonstrates the value of preserved dust samples for follow-up investigation more broadly.

关键词： Respirable dust Dust control SEM–EDX Scrubber Canopy air curtain Silica

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： Y.H.Zhang H.Li Z.w.Yang X.Liu Q.f.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.with increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

Rescattering of stimulated Raman side scattering in nonuniform plasmas

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第5期9卷 68-76页

作者： S.Tan Q.wang Y.Chen w.B.Yao C.Z.Xiao J.f.Myatt School of Physics and Electronics Hunan UniversityChangsha 410082China Institute of Applied Physics and Computational Mathematics Beijing 100094China School of Electrical and Information Engineering Anhui University of Science and TechnologyHuainanAnhui 232001China Department of Electrical and Computer Engineering University of Alberta9211116 St.NWEdmontonAlberta T6G 1H9Canada

Rescattering of stimulated Raman side scattering(SRSS)is observed for the first time via two-dimensional(2D)particle-in-cell(PIC)*** construct a theoretical model for the rescattering process,which can predict the region of occurrence of mth-order SRSS and estimate its *** rescattering process is identified by the 2D PIC simulations under typical conditions of a direct-drive inertial confinement fusion *** electrons produced by second-order SRSS propagate nearly perpendicular to the density gradient and gain nearly the same energy as in first-order SRSS,but there is no cascade acceleration to produce superhot *** studies for a wide range of ignition conditions show that SRSS and associated rescatterings are robust and important processes in inertial confinement fusion.

关键词： nonuniform acceleration scattering

Precipitation transformation pathway and mechanical behavior of nanoprecipitation strengthened fe-Mn-Al-C-Ni austenitic low-density steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第7期174卷 157-167页

作者： Y.f.An X.P.Chen L.Mei P.Ren D.wei w.Q.Cao College of Materials Science and Engineering Chongqing UniversityChongqing 400044China Guangxi Engineering Research Center for Characteristic Metallic Powder Materials School of Electronic EngineeringGuangxi University of Science and TechnologyLiuzhou 545006China Central Iron&Steel Research Institute Beijing 100081China

Precipitation strengthening has been widely adopted in austenitic low-density steel owing to excellent hardened *** approach generally employs the coherentκ′carbides and non-coherent B2 *** the precipitation transformation pathway is decisive for further optimizing the microstructures under specific engineering ***,the detailed precipitation sequence of fe-28Mn-11Al-1C-5Ni(wt%)austenitic low-density steel as well as its influence on mechanical prop-erties during aging process is systematically *** results reveal that nano-sizedκ′carbides domains(2 nm)exist in the solution-treated *** aging at 500℃for 1 h,the cuboidalκ′carbides(15-20 nm)uniformly disperse in austenite ***,after aging at 700℃for 15 min,the coarsenκ′carbides(30-35 nm)inhomogeneously distribute and align preferentially along the〈100〉***,extending the aging time to 60 min,the needle-type B2 particles replace theκ′carbides due to the enrichment of Ni elements at the phase boundaries among the austenite andκ′*** aging at 900℃,κ′carbides entirely dissolve into the austenite matrix,and the intragranular B2 particles are the sole precipitates in the austenite matrix and follow the K-S orientation relationship with *** work hardening capability seriously deteriorates due to the shearing ofκ′carbides by gliding *** the intragranular B2 particles preserve excellent work hardening rate by dislocations bow-out *** present work is meaningful for guiding the design of new generation dual-nano precipitation austenitic lightweight steel.

关键词： Lightweight steel κ′-carbides B2 particles work hardening capability

Precipitation of multi-type nano-quasicrystals in a Mg-Zn-Y alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 997-1008页

作者： w.Z.wang X.Z.Zhou L.f.Zhang H.Q.Ye Z.Q.Yang Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China Ji Hua Laboratory Foshan 528251China foshan University Foshan 528231China

Mg-6Zn-1Y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging *** evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy *** new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral ***-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-Zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged *** addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 *** findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： Quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

Telomeric DNA breaks in human induced pluripotent stem cells trigger ATR-mediated arrest and telomerase-independent telomere damage repair

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Molecular Cell Biology 2024年第3期16卷 46-60页

作者： Katrina N.Estep John w.Tobias Rafael J.fernandez Brinley M.Beveridge f.Brad Johnson Department of Pathology and Laboratory Medicine University of PennsylvaniaPhiladelphiaPA 19104USA Quantiative Biosciences Merck&Co.Inc.West PointPA 19486USA Penn Genomic Analysis Core University of PennsylvaniaPhiladelphiaPA 19104USA

Although mechanisms of telomere protection are well-defined in differentiated cells,how stem cells sense and respond to telomere dysfunction,in particular telomeric double-strand breaks(DSBs),is poorly ***,we report the DNA damage signaling,cell cycle,and transcriptome changes in human induced pluripotent stem cells(iPSCs)in response to telomere-internal *** engineer human iPSCs with an inducible TRf1-fokI fusion protein to acutely induce DSBs at *** this model,we demonstrate that TRf1-fokI DSBs activate an ATR-dependent DNA damage response,which leads to p53-independent cell cycle arrest in *** CRISPR–Cas9 to cripple the catalytic domain of telomerase reverse transcriptase,we show that telomerase is largely dispensable for survival and lengthening of TRf1-fokI-cleaved telomeres,which instead are effectively repaired by robust homologous recombination(HR).In contrast to HR-based telomere maintenance in mouse embryonic stem cells,where HR causes ZSCAN4-dependent extension of telomeres beyond their initial lengths,HR-based repair of telomeric breaks is sufficient to maintain iPSC telomeres at a normal length,which is compatible with sustained survival of the cells over several days of TRf1-fokI *** findings suggest a previously unappreciated role for HR in telomere maintenance in telomerase-positive iPSCs and reveal distinct iPSC-specific responses to targeted telomeric DNA damage.

关键词： telomeres telomerase alternative lengthening of telomeres pluripotent stem cells DNA damage double-strand breaks

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.f.wang C.J.wang w.V.Yue Z.J.Zhang Z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

Nickel sulfate solution fluoride separation with hydrous zirconium oxide

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tungsten 2024年第2期6卷 367-381页

作者： Elbert M.Nigri Ummul K.Sultana André L.A.Santos James w.Vaughan Sonia D.f.Rocha Department of Mining Engineering Federal University of Minas GeraisBelo Horizonte 31270-901Brazil School of Chemical Engineering University of QueenslandSt Lucia 4072Australia

fluoride is an impurity in nickel sulfate production,which is required for electric vehicle *** zirconium oxide(HZO)was evaluated for removing fl uoride from nickel sulfate *** fluoride removal occurred at pH value 4 and optimal pH value is 4–5,considering Zr *** availability decreases with pH due to hydrogen fluoride and zirconium fluoride aqueous *** removal is initially rapid,with 50 wt.%removal in 7 min,followed by slow removal up to 68 wt.%after 72 h and follows second order rate *** removal was dominated by an ion exchange mechanism and resulting Zr–f bonds were observed using fourier-transform infrared *** presence of nickel sulfate decreased loading capacity compared to a salt-free *** maintained adsorption capacity through five cycles of loading and regeneration.

关键词： Hydrous zirconium oxide Nickel sulfate fluoride Adsorption Anion exchange