检索结果-南通市图书馆

Inflow and outflow permeability tests in a very soft clay under low stresses

在线全文

学校读者我要写书评

暂无评论

Journal of rock Mechanics and Geotechnical Engineering 2024年第8期16卷 3270-3283页

作者： J.W.s.Vargas f.A.B.Danziger f.r.Lopes T.Lunne federal University of rio de Janeiro Rio de JaneiroBrazil Norwegian Geotechnical Institute OsloNorway

In situ inflow and outflow permeability tests with the BAT probe at sarapuíII soft clay test site are presented.A description of the BAT permeability test is provided,discussing its advantages and shortcomings,especially in the case of very soft clays under low *** pressures were monitored during probe installation and were found to be slightly lower than piezocone u2 pore pressures,consistent with the position of the *** role of filter tip saturation was investigated after the usual saturation procedure provided an unsatisfactory pore pressure response during probe *** show that the vacuum saturation procedure provides adequate response during installation and increases the reliability of the coefficient of permeability determination in early *** inflow and outflow tests yielded similar results,indicating that careful execution of the test can lead to good test repeatability regardless of the loading *** sequences of alternated inflow and outflow tests have yielded similar results,indicating that soil reconsolidation and filter clogging were negligible in the tests *** are presented concerning the relationship between index parameters and the in situ coefficient of permeability f.r.s.rapuíII clay,which plot outside the range of existing databases.

关键词： Permeability test soft clay BAT probe Inflow and outflow tests

MgO-attached graphene nanosheet(MgO@GNs)reinforced magnesium matrix nanocomposite with superior mechanical,corrosion and biological performance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 2062-2076页

作者： s.Abazari A.shamsipur H.r.Bakhsheshi-rad M.s.soheilirad f.Khorashadizade s.s.Mirhosseini Department of Materials and Metallurgical Engineering Amirkabir University of TechnologyTehran ***Iran Iranian National standards Organization of Hormozgan HormozganIran Advanced Materials research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran Department of Materials and Metallurgical Engineering Iran University of Science and TechnologyTehranIran

Magnesium(Mg)alloys are gaining great consideration as body implant materials due to their high biodegradability and ***,they suffer from low corrosion resistance and antibacterial *** this research,semi-powder metallurgy followed by hot extrusion was utilized to produce the magnesium oxide@graphene nanosheets/magnesium(MgO@GNs/Mg)composite to improve mechanical,corrosion and cytocompatibility *** have revealed that the incorporation of MgO@GNs nanohybrids into Mg-based composite enhanced microhardness and compressive *** vitro,osteoblast cell culture tests show that using MgO@GNs nanohybrid fillers enhances osteoblast adhesion and apatite *** presence of MgO@GNs nanoparticles in the composites decreased the opening defects,micro-cracks and micro-pores of the composites thus preventing the penetration of the corrosive solution into the *** demonstrated that the MgO@GNs/Mg composite possesses excellent antibacterial properties because of the combination of the release of MgO and physical damage to bacterium membranes caused by the sharp edges of graphene nanosheets that can effectively damage the cell wall thereby facilitating penetration into the bacterial lipid ***,the MgO@GNs/Mg composite with high mechanical strength,antibacterial activity and corrosion resistance is considered to be a promising material for load-bearing implant applications.

关键词： metal matrix composites MgO@GNs nanohybrid strengthening mechanisms antibacterial activity biocompatibility

fEA-based Geometrical Modification of switched reluctance Motor for radial force reduction

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Electrical Engineering 2024年第1期10卷 124-135页

作者： rani s Jayapragash r school of Electrical Engineering Vellore Institute of TechnologyChennai 600127India

switched reluctance motors(srMs)are becoming increasingly popular in the automotive sector owing to their robust ***,srMs are preferred particularly for EV applications owing to their fault tolerance,magnet-free structure,and high power/torque *** main concerns of srM compared to other machines include torque ripple and *** primary cause of vibration is the radial force created by the srM.A geometry-based modification of the srM to reduce the radial force without significantly changing the average torque produced is *** primary goal is to design a 4-phase,8/6 srM with a lower radial *** possible geometrical alterations are proposed:one with square windows and the other with circular holes on the rotor *** windows are sized and positioned to avoid flux *** criteria are developed for the optimal window size and *** element analysis(fEA)modelling of the srM is used to validate its *** fEA results are compared with the performance parameters obtained using the analytical *** the multiphysics design tool ANsYs to obtain the natural frequencies and associated deformations through modal *** to the conventional geometry,the radial force is significantly reduced by providing windows.

关键词： 8/6 srM radial force modal analysis fEA analysis natural frequencies srM with windows

Kinematic analysis of flexible bipedal robotic systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 795-818页

作者： r.fAZEL A.M.sHAfEI s.r.NEKOO Department of Mechanical Engineering Shahid Bahonar University of KermanKerman ***Iran Departamento de Ingenieria de sistemas y Automatica Escuela Técnica Superior de IngenieriaUniversidad de SevillaSeville 41092Spain

In spite of its intrinsic complexities,the passive gait of bipedal robots on a sloping ramp is a subject of interest for numerous *** distinguishes the present research from similar works is the consideration of flexibility in the constituent links of this type of robotic *** is not a far-fetched assumption because in the transient(impact)phase,due to the impulsive forces which are applied to the system,the likelihood of exciting the vibration modes increases ***,the human leg bones that are involved in walking are supported by viscoelastic muscles and ***,for achieving more exact results,it is essential to model the robot links with viscoelastic *** this end,the Gibbs-Appell formulation and Newton's kinematic impact law are used to derive the most general form of the system's dynamic equations in the swing and transient phases of *** most important issue in the passive walking motion of bipedal robots is the determination of the initial robot configuration with which the system could accomplish a periodic and stable gait solely under the effect of gravitational *** extremely unstable nature of the system studied in this paper and the vibrations caused by the impulsive forces induced by the impact of robot feet with the inclined surface are some of the very serious challenges encountered for achieving the above-mentioned *** overcome such challenges,an innovative method that uses a combination of the linearized equations of motion in the swing phase and the algebraic motion equations in the transition phase is presented in this paper to obtain an eigenvalue *** solving this problem,the suitable initial conditions that are necessary for the passive gait of this bipedal robot on a sloping surface are *** effects of the characteristic parameters of elastic links including the modulus of elasticity and the Kelvin-Voigt coefficient on the walking stability of this type of

关键词： bipedal robot flexible link swing phase transient phase eigenvalue problem Kelvin-Voigt coefficient

Parametric investigation on the novel and cost-effective nano fly ash impregnated geopolymer system f.r.s.stainable construction

在线全文

学校读者我要写书评

暂无评论

frontiers of structural and Civil Engineering 2024年第2期18卷 170-183页

作者： r.MOHANA s.M.Leela BHArATHI Department of Civil Engineering Mepco Schlenk Engineering CollegeSivakasi 626123India

The hazardous environmental effects of greenhouse gas emissions and climate change demand alternative sources for cementitious materials in the construction *** development of geopolymer structures provides a way of producing 100%cement-free *** this research work,a novel and simple way of deriving nano particles from waste fly ash particles is *** effect of adding the synthesized nano fly ash particles as a filler medium in geopolymer mortars was investigated by considering strength and durability *** optimization was done by using regression analysis on the geopolymer mortar and the impact of adding nano fly ash particles was studied by varying different percentages of addition ranging from 0 to 7.5%by weight of binder *** the results,it was observed that 1%nano fly ash acted not only as a filler but also as nano-sized precursors of the polymerization process,resulting in denser geopolymer *** can explain the extraordinary gain in strength of 72.11 MPa as well as the denser core with negligible level of chloride ion penetration,making the material suitable for the development of structures susceptible to marine environment.

关键词： geopolymer nano fly ash chloride ion penetration durability polymerization fillers

An Intelligent sDN-IoT Enabled Intrusion Detection system for Healthcare systems Using a Hybrid Deep Learning and Machine Learning Approach

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Communications 2024年第10期21卷 267-287页

作者： r Arthi s Krishnaveni sherali Zeadally Computational Intelligence School of ComputingSRMISTKattankulathurChennaiIndia College of Communication and Information University of KentuckyUSA

The advent of pandemics such as COVID-19 significantly impacts human behaviour and lives every ***,it is essential to make medical services connected to internet,available in every remote location during these ***,the security issues in the Internet of Medical Things(IoMT)used in these service,make the situation even more critical because cyberattacks on the medical devices might cause treatment delays or clinical ***,services in the healthcare ecosystem need rapid,uninterrupted,and secure *** solution provided in this research addresses security concerns and services availability for patients with critical health in remote *** research aims to develop an intelligent software Defined Networks(sDNs)enabled secure framework for IoT healthcare *** propose a hybrid of machine learning and deep learning techniques(DNN+sVM)to identify network intrusions in the sensor-based healthcare *** addition,this system can efficiently monitor connected devices and suspicious ***,we evaluate the performance of our proposed framework using various performance metrics based on the healthcare application *** experimental results show that the proposed approach effectively detects and mitigates attacks in the sDN-enabled IoT networks and perf.r.s.better that other state-of-art-approaches.

关键词： deep neural network healthcare intrusion detection system IoT machine learning software-defined networks

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

在线全文

学校读者我要写书评

暂无评论

Journal of Materials science & Technology 2024年第2期169卷 53-67页

作者： Y.B.Zhang s.J.song f.Liu state Key Laboratory of solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPfE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

An Efficient Modelling of Oversampling with Optimal Deep Learning Enabled Anomaly Detection in streaming Data

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Communications 2024年第5期21卷 249-260页

作者： r.rajakumar s.sathiya Devi srinivasa ramanujan Centre SASTRA Deemed UniversityKumbakonamTamil Nadu 612001India University College of Engineering BIT CampusAnna UniversityTiruchirappalli 620024India

recently,anomaly detection(AD)in streaming data gained significant attention among research communities due to its applicability in finance,business,healthcare,education,*** recent developments of deep learning(DL)models find helpful in the detection and classification of *** article designs an oversampling with an optimal deep learning-based streaming data classification(Os-ODLsDC)*** aim of the OsODLsDC model is to recognize and classify the presence of anomalies in the streaming *** proposed Os-ODLsDC model initially undergoes preprocessing *** streaming data is unbalanced,support vector machine(sVM)-synthetic Minority Over-sampling Technique(sVM-sMOTE)is applied for oversampling ***,the Os-ODLsDC model employs bidirectional long short-term memory(Bi LsTM)for AD and ***,the root means square propagation(rMsProp)optimizer is applied for optimal hyperparameter tuning of the Bi LsTM *** ensuring the promising performance of the Os-ODLsDC model,a wide-ranging experimental analysis is performed using three benchmark datasets such as CICIDs 2018,KDD-Cup 1999,and NsL-KDD datasets.

关键词： anomaly detection deep learning hyperparameter optimization oversampling sMOTE streaming data

Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4si alloy

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 362-373页

作者： f.Akbari M.Golkaram s.Beyrami G.shirazi K.Mantashloo r.Taghiabadi M.saghafi Yazdi I.Ansarian Department of Metallurgy and Material science Imam Khomeini International University(IKIU)Qazvin ***Iran

The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4si al-loy through a high solidification cooling rate(sCr).According to the results,by increasing the sCr from 2.0 to 59.5℃/s the average size of primary si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,***-ing the sCr also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological *** instance,under the applied pressure of 0.5 MPa,an in-crease in the sCr from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,*** wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.

关键词： zinc-silicon alloy primary silicon solidification cooling rate tribology sliding wear