检索结果-南通市图书馆

Artificial ground freezing of underground mines in cold regions using thermosyphons with air insulation

在线全文

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第5期34卷 643-654页

作者： Ahmad f.Zueter Mohammad Zolfagharroshan Navid Bahrani Agus p.Sasmito Department of Civil and resource Engineering Dalhousie UniversityHalifax B3H4R2Canada Department of Mining Engineering McGill UniversityMontreal H3A0E8Canada

Current practice of underground artificial ground freezing(AGf)typically involves huge refrigeration systems of large economic and environmental *** this study,a novel AGf technique is proposed deploying available cold wind in cold *** is achieved by a static heat transfer device called thermosyphon equipped with an air insulation layer.A refrigeration unit can be optionally integrated to meet additional cooling *** introduction of air insulation isolates the thermosyphon from ground zones where freezing is not needed,resulting in:(1)steering the cooling resources(cold wind or refrigeration)towards zones of interest;and(2)minimizing refrigeration *** design is demonstrated using well-validated mathematical models from our previous work based on two-phase enthalpy method of the ground coupled with a thermal resistance network for the *** Canadian mines are considered:the Cigar Lake Mine and the Giant *** results show that our proposed design can speed the freezing time by 30%at the Giant Mine and by two months at the Cigar Lake ***,a cooling load of 2.4 GWh can be saved at the Cigar Lake ***,this study provides mining practitioners with sustainable solutions of underground AGf.

关键词： Artificial ground freezing Underground mining Sustainable mining Thermosyphon Air insulation Cold regions

Enhanced entropy generation and heat transfer characteristics of magnetic nano-encapsulated phase change materials in latent heat thermal energy storage systems

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 1051-1070页

作者： p.S.REDDY p.SREEDEVI Department of Mathematics Rajeev Gandhi Memorial College of Engineering and TechnologyNandyal 518501India

The objective of the current study is to investigate the importance of entropy generation and thermal radiation on the patterns of velocity,isentropic lines,and temperature contours within a thermal energy storage device filled with magnetic nanoencapsulated phase change materials(NEpCMs).The versatile finite element method(fEM)is implemented to numerically solve the governing *** effects of various parameters,including the viscosity parameter,ranging from 1 to 3,the thermal conductivity parameter,ranging from 1 to 3,the Rayleigh parameter,ranging from 102 to 3×10^(2),the radiation number,ranging from 0.1 to 0.5,the fusion temperature,ranging from 1.0 to 1.2,the volume fraction of NEpCMs,ranging from 2%to 6%,the Stefan number,ranging from 1 to 5,the magnetic number,ranging from 0.1 to 0.5,and the irreversibility parameter,ranging from 0.1 to 0.5,are examined in detail on the temperature contours,isentropic lines,heat capacity ratio,and velocity ***,the heat transfer rates at both the cold and hot walls are analyzed,and the findings are presented *** results indicate that the time taken by the NEpCMs to transition from solid to liquid is prolonged inside the chamber region as the fusion temperatureθf ***,the contours of the heat capacity ratio Cr decrease with the increase in the Stefan number Ste.

关键词： volume fraction of nano-encapsulated phase change material(NEpCM) radiation Stefan number heat capacity ratio entropy generation

Niche differentiation among facultative filter feeders: Insights from invasive ponto-Caspian mysids

在线全文

学校读者我要写书评

暂无评论

Current Zoology 2024年第4期70卷 513-521页

作者： péter Borza Varsha Rani Csaba f.Vada Institute of Aquatic Ecology Centre for Ecological ResearchKarolina ut 29.1113 BudapestHungary Doctoral School of Biology Institute of BiologyEotvos Lorand UniversityPazmany Péter sétany 1/C1117 BudapestHungary

The degree of dietary specialization has a fundamental impact on the ecological function and interactions of suspension *** niche differentiation by food particle size is common among obligate suspension feeders,its role is not evident in facultative *** this study,we aimed at providing new insights on the matter by focusing on sympatric mysid *** mysids use different mechanisms for raptorial and filter-feeding,they represent a more adequate model system than for example,the more extensively studied *** made morpholog-ical measurements on the 4 coexisting invasive ponto-Caspian mysid species to determine the areas and mesh sizes of their *** also quantified their clearance rates on the microalga Cryptomonas *** a laboratory experiment to reveal how morphological differences manifest in their overall filtering *** found relatively small but consistent differences in the primary filter area among the species,indicating that morphological constraints due to the enclosed position of the setae might limit the possibility for *** primary filter mesh sizes were small in all 4 species(0.69-2.73μm)with moderate but consistent intraspecific differences,suggesting that the benefit of being able to capture small particles might outweigh the pressure for *** observed clearance rates were in accordance with the morphological characteristics of the species,highlighting that auxiliary filters(present in one of the species,Limnomysis benedeni)are needed to increase filtering capacity *** study confirmed that food particle size can contribute to the niche differentiation of facultative filter feeders,but also indicated that they can tolerate a higher overlap than obligate *** observed differences were related to the habitat preferences and predatory potentials of the species,suggesting that complementarity among the different niche axes might further facilitate theircoexistence.

关键词： clearance rate coexistence filter area filtermesh size.

A Hybrid Optimization Approach of Single point Incremental Sheet forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with principal Component Analysiss

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 160-166页

作者： A Visagan p Ganesh Department of production Technology Madras Institute of TechnologyChennai-600044India

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with principal Component Analysis(pCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with pCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), feed Rate(fR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

关键词： single point incremental forming AISI 316L taguchi grey relation analysis principal component analysis surface roughness scanning electron microscopy

Development of an ultrathin liquid sheet target for laser ion acceleration at high repetition rates in the kilohertz range

在线全文

学校读者我要写书评

暂无评论

High power Laser Science and Engineering 2024年第3期12卷 134-145页

作者： M.füle A.p.Kovács T.Gilinger M.Karnok p.Gaál S.figul G.Marowsky K.Osvay National Laser-Initiated Transmutation Laboratory University of SzegedSzegedHungary Department of Experimental physics University of SzegedSzegedHungary ELI ALpS ELI-HU Non-Profit Ltd.SzegedHungary Department of Optics and Quantum Electronics University of SzegedSzegedHungary Advanced Microfluidic Systems GmbH GöttingenGermany

A colliding microjet liquid sheet target system was developed and tested for pairs of round nozzles of 10,11 and 18μm in *** sheet's position stability was found to be better than a few *** interaction with 50 mJ laser pulses,the 18μm jet has a resonance amplitude of 16μm at a repetition rate of 33 Hz,while towards 100 Hz it converges to 10μm for all nozzles.A white-light interferometric system was developed to measure the liquid sheet thickness in the target chamber both in air and in vacuum,with a measurement range of 182 nm±1μm and an accuracy of±3%.The overall shape and 3D shape of the sheet follow the Hasson±peck model in *** vacuum versus air,the sheet gradually loses 10%of its thickness,so the thinnest sheet achieved was below 200 nm at a vacuum level of 10±4mbar,and remained stable for several hours of operation.

关键词： diagnostics laser ion acceleration nanometric liquid sheet targets vacuum test

Cryogenic and conventional milling of AZ91 magnesium alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第6期12卷 2503-2519页

作者： Vikas Marakini Srinivasa pai p Gururaj Bolar Bhaskara p Achar Department of Mechanical Engineering Nitte(Deemed to be University)NMAM Institute of Technology(NMAMIT)Nitte 574110India Department of Mechanical and Industrial Engineering Manipal Institute of TechnologyManipal Academy of Higher EducationManipal 576104India

Use of magnesium is the need of the hour due to its low density as well as its high strength-to-weight and stiffness-to-weight ratio *** study focuses on the effectiveness of liquid nitrogen(LN_(2))assisted cryogenic machining on the surface integrity(SI)characteristics of AZ91 magnesium *** milling using uncoated carbide inserts have been performed under liquid nitrogen(LN_(2))assisted cryogenic condition and compared with conventional(dry)*** are performed using machining parameters in terms of cutting speeds of 325,475,625 m/min,feed rates of 0.05,0.1,0.15 mm/teeth and depth of cuts of 0.5,1,1.5 mm *** significant surface integrity characteristics such as surface roughness,microhardness,microstructure,and residual stresses have been *** of SI characteristics with respect to milling parameters have been identified using statistical technique such as ANOVA and signal-to-noise(S/N)ratio ***,the multi criteria decision making(MCDM)techniques such as additive ratio assessment method(ARAS)and complex proportional assessment(COpRAS)have been utilized to identify the optimal conditions for milling AZ91 magnesium alloy under both dry and cryogenic *** of LN_(2)during machining,resulted in reduction in machining temperature by upto 29%with a temperature drop from 251.2℃under dry condition to 178.5℃in cryogenic *** showed the advantage of performing cryogenic milling in improving the surface integrity to a significant *** machining considerably minimized the roughness by upto 28%and maximised the microhardness by upto 23%,when compared to dry *** speed has caused significant impact on surface roughness(95.33%-dry,92.92%-cryogenic)and surface microhardness(80.33%-dry,82.15%-cryogenic).Due to the reduction in machining temperature,cryogenic condition resulted in compressive residual stresses(maximumσ║=-113 Mpa)on the alloy *** indicate no

关键词： Magnesium alloy Cryogenic machining Roughness Microhardness Microstructure residual stress Multi criteria decision making

On the functions of astrocyte-mediated neuronal slow inward currents

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration research 2024年第12期19卷 2602-2612页

作者： Balázs pál Department of physiology Faculty of MedicineUniversity of DebrecenDebrecenHungary

Slow inward currents are known as neuronal excitatory currents mediated by glutamate release and activation of neuronal extra synaptic N-met hyl-D-aspartate receptors with the contribution of *** events are significantly slower than the excitatory postsynaptic *** of slow inward currents are determined by seve ral factors including the mechanisms of astrocytic activation and glutamate release,as well as the diffusion pathways from the release site towards the extra synaptic recepto *** are stimulated by neuronal network activity,which in turn excite neurons,forming an astrocyte-neuron feedback *** as a consequence of brain edema,astrocytic swelling can also induce slow inward currents under pathological *** is a growing body of evidence on the roles of slow inward currents on a single neuron or local network *** events often occur in synchro ny on neurons located in the same astrocytic *** synchronization of neuronal excitability,slow inward currents also set synaptic strength via eliciting timing-dependent synaptic *** addition,slow inward currents are also subject to non-synaptic plasticity triggered by long-la sting stimulation of the excitatory *** note,there might be important regionspecific differences in the roles and actions triggering slow inward *** greater networks,the pathophysiological roles of slow inward currents can be better understood than physiological *** inward currents are identified in the pathophysiological background of autism,as slow inward currents drive early hypersynchrony of the neural *** inward currents are significant contributors to paroxysmal depolarizational shifts/interictal *** events are related to epilepsy,but also found in Alzheimer's disease,parkinson's disease,and stroke,leading to the decline of cognitive *** with features overlapping with slow inward currents(excitatory,N-methyl-Dasp

关键词： astrocyte cortical spreading depolarization gliotransmission glutamate neural synchronization NMDA receptor paroxysmal depolarizational shift slow inward current

An Efficient Approach to Escalate the Speed of Training Convolution Neural Networks

在线全文

学校读者我要写书评

暂无评论

China Communications 2024年第2期21卷 258-269页

作者： p pabitha Anusha Jayasimhan Department of Computer Technology Anna UniversityMadras Institute of Technology CampusChennai 600044India

Deep neural networks excel at image identification and computer vision applications such as visual product search, facial recognition, medical image analysis, object detection, semantic segmentation,instance segmentation, and many others. In image and video recognition applications, convolutional neural networks(CNNs) are widely employed. These networks provide better performance but at a higher cost of computation. With the advent of big data, the growing scale of datasets has made processing and model training a time-consuming operation, resulting in longer training times. Moreover, these large scale datasets contain redundant data points that have minimum impact on the final outcome of the model. To address these issues, an accelerated CNN system is proposed for speeding up training by eliminating the noncritical data points during training alongwith a model compression method. furthermore, the identification of the critical input data is performed by aggregating the data points at two levels of granularity which are used for evaluating the impact on the model *** experiments are conducted using the proposed method on CIfAR-10 dataset on resNet models giving a 40% reduction in number of fLOps with a degradation of just 0.11% accuracy.

关键词： CNN deep learning image classification model compression

Numerical analysis of high‑speed railway slab tracks using calibrated and validated 3D time‑domain modelling

在线全文

学校读者我要写书评

暂无评论

Railway Engineering Science 2024年第1期32卷 36-58页

作者： A.f.Esen O.Laghrouche p.K.Woodward D.Medina‑pineda Q.Corbisez J.Y.Shih D.p.Connolly Institute for High‑Speed Rail and System Integration University of LeedsLeeds LS29JTUK Institute for Infrastructure and Environment Heriot-Watt UniversityEdinburgh EH144ASUK Alstom Transport Saint‑OuenFrance Birmingham Centre for Railway research and Education University of BirminghamBirmingham B152TTUK

Concrete slabs are widely used in modern railways to increase the inherent resilient quality of the tracks,provide safe and smooth rides,and reduce the maintenance *** this paper,the elastic performance of a novel slab trackform for high-speed railways is investigated using three-dimensional finite element modelling in *** is then compared to the performance of a ballasted ***,slab and ballasted track models are developed to replicate the full-scale testing of track *** the models are calibrated with the experimental results,the novel slab model is developed and compared against the calibrated slab track *** slab and ballasted track models are then extended to create linear dynamic models,considering the track geodynamics,and simulating train passages at various speeds,for which the Ledsgard documented case was used to validate the *** travelling at low and high speeds are analysed to investigate the track deflections and the wave propagation in the soil,considering the issues associated with critical *** train loading methods are discussed,and the most practical approach is retained and ***,correlations are made between the geotechnical parameters of modern high-speed rail and conventional *** is found that considering the same ground condition,the slab track deflections are considerably smaller than those of the ballasted track at high speeds,while they show similar behaviour at low speeds.

关键词： High-speed railways Slab track New ballastless track Ballasted track Critical speeds finite element modelling Calibration of numerical models