检索结果-南通市图书馆

Effect of solidification cooling rate on microstructure and tribology characteristics of Zn-4Si alloy

在线全文

学校读者我要写书评

暂无评论

International Journal of minerals,metallurgy and materials 2024年第2期31卷 362-373页

作者： f.Akbari m.Golkaram S.Beyrami G.Shirazi K.mantashloo r.Taghiabadi m.Saghafi Yazdi I.Ansarian Department of metallurgy and material Science Imam Khomeini International University(IKIU)Qazvin ***Iran

The main objective of this work was to modify the microstructure and enhance the tribological properties of a new Zn-4Si al-loy through a high solidification cooling rate(SCr).According to the results,by increasing the SCr from 2.0 to 59.5℃/s the average size of primary Si particles and that of the grains reduced from 76.1 and 3780μm to less than about 14.6 and 460μm,***-ing the SCr also enhanced the microstructural homogeneity,decreased the porosity content(by 50%),and increased the matrix hardness(by 36%).These microstructural changes enhanced the tribological *** instance,under the applied pressure of 0.5 mPa,an in-crease in the SCr from 2.0 to 59.5℃/s decreased the wear rate and the average friction coefficient of the alloy by 57%and 23%,*** wear mechanism was also changed from the severe delamination,adhesion,and abrasion in the slowly-cooled alloy to the mild tribolayer delamination/abrasion in the high-cooling-rate-solidified sample.

关键词： zinc-silicon alloy primary silicon solidification cooling rate tribology sliding wear

Nonlinear dynamic modeling of planar moving Timoshenko beam considering non-rigid non-elastic axial effects

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 479-496页

作者： m.ABBASI GAVArI m.r.HOmAEINEZHAD faculty of mechanical Engineering K.N.Toosi University of TechnologyTehran 19991-43344Iran

Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible *** manipulator consists of an elastic arm,a rotary motor,and a rigid carrier,and undergoes general in-plane rigid body motion along with elastic transverse *** accurately model the elastic behavior,Timoshenko’s beam theory is used to describe the flexible arm,which accounts for rotary inertia and shear deformation *** applying Newton’s second law,the nonlinear governing equations of motion for the manipulator are derived as a coupled system of ordinary differential equations(ODEs)and partial differential equations(PDEs).Then,the assumed mode method(Amm)is used to solve this nonlinear system of governing equations with appropriate shape *** assumed modes can be obtained after solving the characteristic equation of a Timoshenko beam with clamped boundary conditions at one end and an attached mass/inertia at the *** addition,the effect of the transverse vibration of the inextensible arm on its axial behavior is *** the axial rigidity,the effect makes the rigid body dynamics invalid for the axial behavior of the ***,numerical simulations are conducted to evaluate the performance of the developed model,and the results are compared with those obtained by the finite element *** comparison confirms the validity of the proposed dynamic model for the *** to the mentioned features,this model can be reliable for investigating the system’s vibrational behavior and implementing vibration control algorithms.

关键词： planar moving Timoshenko beam non-rigid non-elastic axial effect as-sumed mode method(Amm) nonlinear motion analysis

Pile foundation in alternate layered liquefiable and non-liquefiable soil deposits subjected to earthquake loading

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 359-376页

作者： Praveen Huded m Suresh r Dash LEA Associates South East Asia Pvt.Ltd. New Delhi 110044India Indian Institute of Technology Bhubaneswar Khurda 752050India

Pile foundations are still the preferred foundation system for high-rise structures in earthquake-prone *** foundations have experienced failures in past earthquakes due to *** on pile foundations in liquefiable soils has primarily focused on the pile foundation behavior in two or three-layered soil ***,in natural occurrence,it may occur in alternative layers of liquefiable and non-liquefiable ***,the experimental and/or numerical studies on the layered effect on pile foundations have not been widely addressed in the *** of the design codes across the world do not explicitly mention the effect of sandwiched non-liquefiable soil layers on the pile *** the present study,the behavior of an end-bearing pile in layered liquefiable and non-liquefiable soil deposit is studied *** study found that the kinematic bending moment is higher and governs the design when the effect of the sandwiched non-liquefied layer is considered in the analysis as opposed to when its effect is ***,ignoring the effect of the sandwiched non-liquefied layer in a liquefiable soil deposit might be a nonconservative design approach.

关键词： pile foundation liquefaction alternately layered soil fixity effect layered effect

Dysprosium oxide,alumina,and graphene oxide reinforced polycaprolactone thin films:Thermal stability,morphology,and cell viability

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第7期42卷 1337-1343,I0005页

作者： mohamed Tharwat Elabbasy mohamed r.Atteya mai A.Samak mousa Abdelrahman Tahani Almahmoud m.A.El-morsy A.A.menazea m.f.H.Abd El-Kader Department of Public Health College of Public Health and Health InformaticsUniversity of Ha'ilHa'il2440Saudi Arabia food Control Department Faculty of Veterinary MedicineZagazig UniversityZagazig44519Egypt Department of Physical Therapy College of Applied Medical SciencesUniversity of Ha'ilHa'ilSaudi Arabia Department of Histology and Cell Biology Faculty of MedicineZagazig UniversityZagazig44519Egypt College of Nursing University of Ha'ilHa'ilSaudi Arabia College of Science and Humanities in Al-Kharj Physics DepartmentPlasma Technology and Material Science UnitPrince Sattam Bin Abdulaziz UniversityAl-kharj11942Saudi Arabia Physics Department Faculty of ScienceUniversity of DamiettaNew Damietta34517Egypt Spectroscopy Department Physics Research InstituteNational Research CentreDokki12622GizaEgypt Biophysics Department Faculty of ScienceCairo UniversityGizaEgypt

Developing a biomaterial for wound healing applications is still a ***,dysprosium oxide(Dy_(2)O_(3)),aluminum oxide(Al_(2)O_(3)),and graphene oxide(GO)were embedded in cast films based on polycaprolactone(PCL)to be examined for wound dressing *** techniques were used to characterize the fabricated films including X-ray diffraction(XrD),fourier transform infrared spectroscopy(fTIr),raman,and scanning electron microscopy(SEm),besides their biological *** thermogravimetric analysis(TGA)exhibits high thermal stability as the scaffold weight decreases slightly to 98.6%after raising the temperature from room temperature to 280℃.The cell viability was investigated and it is shown that the viable cells grow up to approximately 93%at 75μg/***,the cell attachment shows excellent behavior as the cells attach on most of the surface of the modified PCL which shows high biocompatibility.

关键词： Wound healing Polycaprolactone Dy_(2)O_(3) Al_(2)O_(3) Biocompatible rare earths

Kinematic analysis of flexible bipedal robotic systems

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第5期45卷 795-818页

作者： r.fAZEL A.m.SHAfEI S.r.NEKOO Department of mechanical Engineering Shahid Bahonar University of KermanKerman ***Iran Departamento de Ingenieria de Sistemas y Automatica Escuela Técnica Superior de IngenieriaUniversidad de SevillaSeville 41092Spain

In spite of its intrinsic complexities,the passive gait of bipedal robots on a sloping ramp is a subject of interest for numerous *** distinguishes the present research from similar works is the consideration of flexibility in the constituent links of this type of robotic *** is not a far-fetched assumption because in the transient(impact)phase,due to the impulsive forces which are applied to the system,the likelihood of exciting the vibration modes increases ***,the human leg bones that are involved in walking are supported by viscoelastic muscles and ***,for achieving more exact results,it is essential to model the robot links with viscoelastic *** this end,the Gibbs-Appell formulation and Newton's kinematic impact law are used to derive the most general form of the system's dynamic equations in the swing and transient phases of *** most important issue in the passive walking motion of bipedal robots is the determination of the initial robot configuration with which the system could accomplish a periodic and stable gait solely under the effect of gravitational *** extremely unstable nature of the system studied in this paper and the vibrations caused by the impulsive forces induced by the impact of robot feet with the inclined surface are some of the very serious challenges encountered for achieving the above-mentioned *** overcome such challenges,an innovative method that uses a combination of the linearized equations of motion in the swing phase and the algebraic motion equations in the transition phase is presented in this paper to obtain an eigenvalue *** solving this problem,the suitable initial conditions that are necessary for the passive gait of this bipedal robot on a sloping surface are *** effects of the characteristic parameters of elastic links including the modulus of elasticity and the Kelvin-Voigt coefficient on the walking stability of this type of

关键词： bipedal robot flexible link swing phase transient phase eigenvalue problem Kelvin-Voigt coefficient

Control system design for a pressure-tube-type supercritical water-cooled nuclear reactor via a higher order sliding mode method

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第1期35卷 145-154页

作者： m.Hajipour G.r.Ansarifar Department of Nuclear Engineering Faculty of PhysicsUniversity of IsfahanIsfahan 81746-73441Iran

Nuclear power plants exhibit non-linear and time-variable ***,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor(SCWr)is a fourth-generation conceptual *** an SCWr,the non-linear dynamics of the reactor require a controller capable of control-ling the *** this study,a pressure-tube-type SCWr was controlled during reactor power maneuvering with a higher order sliding mode,and the reactor outgoing steam temperature and pressure were controlled *** an SCWr,the temperature,pressure,and power must be maintained at a setpoint(desired value)during power *** point kinetics equations with three groups of delayed neutrons were used in the ***-order and classic sliding mode controllers were separately manufactured to control the plant and were compared with the PI controllers speci-fied in previous *** controlled parameters were reactor power,steam temperature,and ***,for these parameters,the PI controller had certain instabilities in the presence of *** classic sliding mode controller had a higher accuracy and stability;however its main drawback was the chattering *** was highly accurate and stable and had a small computational *** reality,it followed the desired values without oscillations and chattering.

关键词： Supercritical water nuclear reactor Higher order sliding mode controller Steam temperature Steam pressure Point kinetics model

Isolation of microcrystalline Cellulose from Wood and fabrication of Polylactic Acid (PLA) Based Green Biocomposites

在线全文

学校读者我要写书评

暂无评论

Journal of renewable materials 2024年第8期12卷 1455-1474页

作者： Sekar S.m. Nagarajan r. Selvakumar P. Oluwarotimi I.S. Krishnan K. mohammad f. Shaik m.r. Ayrilmis N. Department of mechanical Engineering Kalasalingam Academy of Research and Education Krishnankoil 626126 India Department of mechanical Engineering SSM Institute of Engineering and Technology Dindigul 624002 India Department of Engineering Centre for Engineering Research School of Physics Engineering and Computer Science University of Hertfordshire Hatfield AL10 9AB United Kingdom INTI International University Persiaran Perdana BBN Nilai 71800 Malaysia Department of Chemistry College of Science King Saud University P.O. Box 2455 Riyadh 11451 Saudi Arabia Department of Wood mechanics and Technology Faculty of Forestry Istanbul University–Cerrahpasa Bahcekoy Sariyer Istanbul 34473 Turkey

An innovative microcrystalline cellulose (mCC) natural fibre powder-reinforced PLA biocomposite was investigated using the hand lay-up technique. The polymer matrix composite (PmC) samples were prepared by varying the weight percentages (wt.%) of both PLA matrix and mCC reinforcement: pure PLA/100:0, 90:10, 80:20, 70:30, 60:40 and 50:50 wt.%, respectively. from the results obtained, mCC powder, with its impressive aspect ratio, proved to be an ideal reinforcement for the PLA, exhibiting exceptional mechanical properties. It was evident that the 80:20 wt.% biocomposite sample exhibited the maximum improvement in the tensile, flexural, notched impact, compressive strength and hardness by 28.85%, 20.00%, 91.66%, 21.53% and 35.82%, respectively compared to the pure PLA sample. Similarly, during the thermogravimetric analysis (TGA), the same 80:20 wt.% biocomposite sample showed a minimum weight loss of 20% at 400°C, among others. The morphological study using field Emission Scanning Electron microscopy (fE-SEm) revealed that the uniform distribution of cellulose reinforcement in the PLA matrix actively improved the mechanical properties of the biocomposites, especially the optimal 80:20 wt.% sample. Importantly, it was evident that the optimal PLA/cellulose biocomposite sample could be a suitable and alternative sustainable, environmentally friendly and biodegradable material for semi/structural applications, replacing synthetic and traditional components. © 2024 The Authors.

关键词： biocomposite characterizations environmental pollution fESEm micro crystalline cellulose Polylactic acid

mgO-attached graphene nanosheet(mgO@GNS)reinforced magnesium matrix nanocomposite with superior mechanical,corrosion and biological performance

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of minerals,metallurgy and materials 2024年第9期31卷 2062-2076页

作者： S.Abazari A.Shamsipur H.r.Bakhsheshi-rad m.S.Soheilirad f.Khorashadizade S.S.mirhosseini Department of materials and metallurgical Engineering Amirkabir University of TechnologyTehran ***Iran Iranian National Standards Organization of Hormozgan HormozganIran Advanced materials research Center Department of Materials EngineeringNajafabad BranchIslamic Azad UniversityNajafabadIran Department of materials and metallurgical Engineering Iran University of Science and TechnologyTehranIran

magnesium(mg)alloys are gaining great consideration as body implant materials due to their high biodegradability and ***,they suffer from low corrosion resistance and antibacterial *** this research,semi-powder metallurgy followed by hot extrusion was utilized to produce the magnesium oxide@graphene nanosheets/magnesium(mgO@GNS/mg)composite to improve mechanical,corrosion and cytocompatibility *** have revealed that the incorporation of mgO@GNS nanohybrids into mg-based composite enhanced microhardness and compressive *** vitro,osteoblast cell culture tests show that using mgO@GNS nanohybrid fillers enhances osteoblast adhesion and apatite *** presence of mgO@GNS nanoparticles in the composites decreased the opening defects,micro-cracks and micro-pores of the composites thus preventing the penetration of the corrosive solution into the *** demonstrated that the mgO@GNS/mg composite possesses excellent antibacterial properties because of the combination of the release of mgO and physical damage to bacterium membranes caused by the sharp edges of graphene nanosheets that can effectively damage the cell wall thereby facilitating penetration into the bacterial lipid ***,the mgO@GNS/mg composite with high mechanical strength,antibacterial activity and corrosion resistance is considered to be a promising material for load-bearing implant applications.

关键词： metal matrix composites mgO@GNS nanohybrid strengthening mechanisms antibacterial activity biocompatibility

modelling dynamic pantograph loads with combined numerical analysis

在线全文

学校读者我要写书评

暂无评论

railway Engineering Science 2024年第1期32卷 81-94页

作者： f.f.Jackson r.mishra J.m.rebelo J.Santos P.Antunes J.Pombo H.magalhaes L.Wills m.Askill School of Computing and Engineering University of HuddersfieldHuddersfieldUK School of Computing and Engineering Institute of Railway ResearchUniversity of HuddersfieldHuddersfieldUK IDmEC Instituto Superior TecnicoUniversidade de LisboaLisbonPortugal ISEL Instituto Politecnico de LisboaLisbonPortugal Hitachi rail Newton AycliffeUK Wabtec/Brecknell Willis ChardUK

Appropriate interaction between pantograph and catenary is imperative for smooth operation of electric *** heights of overhead lines to accommodate level crossings,overbridges,and tunnels pose significant challenges in maintaining consistent current collection performance as the pantograph aerodynamic profile,and thus aerodynamic load changes significantly with operational *** research aims to analyse the global flow characteristics and aerodynamic forces acting on individual components of an HSX pantograph operating in different configurations and orientations,such that the results can be combined with multibody simulations to obtain accurate dynamic insight into contact ***,computational fluid dynamics simulations are used to investigate the pantograph component loads in a representative setting,such as that of the recessed cavity on a Class 800 *** an aerodynamic perspective,this study indicates that the total drag force acting on non-fixed components of the pantograph is larger for the knuckle-leading orientation rather than the knuckle-trailing,although the difference between the two is found to reduce with increasing pantograph *** the aerodynamic loads acting on individual components with multibody tools allows for realistic dynamic insight into the pantograph *** results obtained show how considering aerodynamic forces enhance the realism of the models,leading to behaviour of the pantograph-catenary contact forces closely matching that seen in experimental tests.

关键词： Pantograph-catenary interaction Pantograph aerodynamics Computational fluid dynamics Pantograph loads Current collection performance