检索结果-南通市图书馆

Comparative analysis of microstructure,mechanical,and corrosion properties of biodegradable mg-3Y alloy prepared by selective laser melting and spark plasma sintering

在线全文

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第4期12卷 1496-1510页

作者： P.minárik m.Zemková S.Šašek J.Dittrich m.Knapek f.lukáˇc D.Koutný J.Jaroš R.Král faculty of mathematics and Physics Charles UniversityKe Karlovu 5Praha 12116Czech Republic Research Centre University ofŽilinaUniverzitná8215/1Žilina 01026Slovakia Institute of Plasma Physics of the Czech Academy of Sciences Za Slovankou 1782/318200 Praha 8Czech Republic Institute of machine and Industrial Design Brno University of TechnologyTechnická2896/2Brno 61669Czech Republic

This work explored possibilities of biodegradable magnesium alloy mg-3Y preparation by two modern powder metallurgy techniques–spark plasma sintering(SPS)and selective laser melting(Slm).The powder material was consolidated by both methods utilising optimised parameters,which led to very low porosity(∼0.3%)in the Slm material and unmeasurably low porosity in the SPS *** main aim of the study was the thorough microstructure characterisation and interrelation between the microstructure and the functional properties,such as mechanical strength,deformability,and corrosion *** materials showed comparable strength of∼110 mPa in tension and compression and relatively good deformability of∼9%and∼21%for the Slm and SPS materials,*** corrosion resistance of the SPS material in 0.1 m NaCl solution was superior to the Slm one and comparable to the conventional extruded *** digital image correlation during loading and the cross-section analysis of the corrosion layers revealed that the residual porosity and large strained grains have the dominant negative effect on the functional properties of the Slm *** the other hand,one of the primary outcomes of this study is that the SPS consolidation method is very effective in the preparation of the W3 biodegradable alloy,resulting in material with convenient mechanical and degradation properties that might find practical applications.

关键词： magnesium Yttrium Powder metallurgy microstructure mechanical strength Corrosion resistance

metabolic collaboration between cells in the tumor microenvironment has a negligible effect on tumor growth

在线全文

学校读者我要写书评

暂无评论

The Innovation 2024年第2期5卷 107-114页

作者： Johan Gustafsson fariba Roshanzamir Anders Hagnestål Sagar m.Patel Oseeyi I.Daudu Donald f.Becker Jonathan l.Robinson Jens Nielsen Department of life Sciences Chalmers University of TechnologySE-41296 GothenburgSweden Hagnesia AB SE-43854 HindåsSweden Department of Biochemistry and Redox Biology Center University of Nebraska-LincolnLincolnNE 68588USA BioInnovation Institute DK2200 CopenhagenDenmark

The tumor microenvironment is composed of a complex mixture of different cell types interacting under conditions of nutrient deprivation,but the metabolism therein is not fully understood due to difficulties in measuring metabolic fluxes and exchange of metabolites between different cell types in ***-scale metabolic modeling enables estimation of such exchange fluxes as well as an opportunity to gain insight into the metabolic behavior of individual cell ***,we estimated the availability of nutrients and oxygen within the tumor microenvironment using concentration measurements from blood together with a metabolite diffusion *** addition,we developed an approach to efficiently apply enzyme usage constraints in a comprehensive metabolic model of human *** combined modeling reproduced severe hypoxic conditions and the Warburg effect,and we found that limitations in enzymatic capacity contribute to cancer cells’preferential use of glutamine as a substrate to the citric acid ***,we investigated the common hypothesis that some stromal cells are exploited by cancer cells to produce metabolites useful for the cancer *** identified over 200 potential metabolites that could support collaboration between cancer cells and cancer-associated fibroblasts,but when limiting to metabolites previously identified to participate in such collaboration,no growth advantage was *** work highlights the importance of enzymatic capacity limitations for cell behaviors and exemplifies the utility of enzyme-constrained models for accurate prediction of metabolism in cells and tumor microenvironments.

关键词： metabolism effect limitations

Adsorption of yttrium(Y^(3+)) and concentration of rare earth elements from phosphogypsum using chitin and chitin aerogel

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第4期42卷 775-782页

作者： Glaydson S.dos Reis Diana Pinto Sabrina f.lütke Eder C.lima luis f.O.Silva Irineu A.S.De Brum Guilherme l.Dotto Department of forest Biomaterials and Technology Biomass Technology Centre Swedish University of Agricultural SciencesUmeaE13Swedn Universidad De la Costa Calle 58#55-66080002BarranquillaAtlanticoColombia Research Group on Adsorptive and Catalytic Process Engineering(ENGEPAC) Federal University of Santa MariaAv.Roraima100079705900Santa MariaRSBrazil Institute of Chemistry Federal University of Rio Grande do Sul90040060Porto AlegreBrazil

Chitin powder and chitin-aerogel were prepared from shrimp wastes and used to uptake Y^(3+)from aqueous solutions and concentrate this rare earth element from phosphogypsum(PG).Chitin aerogel displays a specific surface area of 945 m^(2)/g,while chitin powder is 3.6 m^(2)/g,which largely influences its adsorption *** the adsorption in synthetic solutions,the effect of pH on Y^(3+)removal is strong for chitin powder *** contrast,no big pH influence was detected for chitin *** interactions and chelation can highlight the proposed mechanism of Y^(3+)on chitin adsorbents for the powder and ***,in addition to these interactions,pore filling/pore diffusion is the main mechanism of Y^(3+)removal in the chitin *** aerogel is efficient in concentrating 8 times the Y^(3+)from PG,a very complex *** complex chitin aerogel-Y^(3+)can be a secondary source of rare earth elements for other applications.

关键词： Rare earths Sustainable material Chitin powder Chitin porous aerogel Yttrium adsorption and recovery

Effect of cold-working on corrosion induced damage in lug joints

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第6期36卷 175-182页

作者： Ramanath m.N Chikmath l. murthy H. Department of Aerospace Engineering Indian Institute of Technology-MadrasChennai 600036India Department of Aeronautical Engineering KLS Gogte Institute of TechnologyBelagavi 590008India

lug joints are preferred joineries for transferring heavy loads to parent components in aerospace *** experience corrosion due to environmental conditions,improper surface finishes and rubbing displacement between the pin and *** causes damage of different sizes and shapes near the *** degradation due to corrosion-induced damage is modelled as a through-pit at one of the identified critical locations through stress *** effect of this pit on fatigue crack initiation life is ***-hole is pre-stressed by cold-working and the benefits of inducing plastic wake on the intended performance of the lug joint during the damages due to corrosion are brought out and compared with non-cold-worked *** analysis is performed on this lug joint with *** results obtained highlight the benefits of cold-working and the methodology can be extended to damage growth and analyse the effect of surface treatments for better structural integrity of components of aerospace vehicles.

关键词： lug joint Corrosion Crack initiation Cold-working Structural integrity

Analysis of the Impact of the Blazhko Effect Both on the Van Hoof Effect and Radial Velocity Amplitude in the Star RR lyr

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第6期24卷 253-272页

作者： Y.El jariri f.l.Sefyani A.Benhida Z.Benkhaldoun K.Kolenberg K.Chafouai A.Habib m.Sabil Observatoire de l'Oukaimeden LPHEAFSSMUniversitéCadi AyyadMarrakech2390Morocco Observatoire de l'Oukaimeden LPHEAFSTGUniversitéCadi AyyadMarrakech549Morocco Département de physique Universitéd'Anvers Avenue Groenenborger 171Anvers2020Belgium lICPm ENSA-BMUniversitéSultan Moulay SlimaneBeni-Mellal23020Morocco

The Van Hoof effect is a phase shift existing between the radial velocity curves of hydrogen and metallic lines within the atmosphere of pulsating *** this article,we present a study of this phenomenon through the spectra of the brightest pulsating star RR lyr of RR lyrae stars recorded for 22 *** based ourselves,on the one hand,on 1268 spectra(41 nights of observation)recorded between the years 1994 and 1997 at the Observatory of Haute Provence(OHP,france)previously observed by Chadid and Gillet,and on the other hand on 1569 spectra(46nights of observation)recorded at our Oukaimeden Observatory(morocco)between 2015 and *** this study,we have detected information on atmospheric dynamics that had not previously been ***,the Van Hoof effect which results in a clear correlation between the radial velocities of hydrogen and those of the metallic lines has been observed and analyzed at different Blazhko phases.A correlation between the radial velocities of different metallic lines located in the lower atmosphere has been observed as *** the first time,we were able to show that the amplitude of the radial velocity curves deduced from the lines of hydrogen and that of feⅡ(λ4923.921?)increases toward the minimum of the Blazhko cycle and decreases toward the maximum of the same Blazhko ***,we found that the Van Hoof effect is also modulated by the Blazhko ***,toward the minimum of the Blazhko cycle the Van Hoof effect is more visible and at the maximum of the Blazhko cycle,this effect is *** also observed the temporal evolution of the amplitudes of the radial velocities of the lower and upper *** observed over a long time,we can interpret it as a function of the Blazhko phases.

关键词： stars:atmospheres stars:variables:RR lyrae shock waves techniques:spectroscopic techniques:radial velocities stars:individual(RR lyr)

Effect of radiative loss mechanisms on fIR thermometric parameters of Nd^(3+)-doped lithium tellurite glasses

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1250-1257,I0002页

作者： C.Y.morassuti A.P.l Silva l.A.O.Nunes S.m.lima l.H.C.Andrade Optical and Photothermal Spectroscopy Group(GEOf) Center for Studies in Natural Resources(CERNA)State University of Mato Grosso do Sul(UEMS)C.P.351DouradosMSBrazil Renato Archer Information Technology Center Dom Pedro I Highway(SP-65)Km 1436-Chácaras Campos dos AmaraisCampinasSPBrazil Institute of Physics of São Carlos University of São PauloSão CarlosSPBrazil

Nd^(3+)-doped tellurite glasses are promising materials for thermometers based on the fluorescence intensity ratio(fIR)***,at high Nd^(3+)concentrations,energy transfer(ET)processes such as optical reabsorption and cross-relaxation can affect the Nd^(3+)emission,which has been little explored in the ***,the present work investigated the use of Nd^(3+)-doped tellurite glass(samples doped with Nd^(3+)at 0.2 mol%,0.5 mol%,2.0 mol%,and 4.0 mol%)in fluorescence thermometers,in the temperature range from 299 to 371 *** results indicate a strong dependence of the fIR parameters on the Nd^(3+)concentration,due to changes in the emission band profiles caused by optical reabsorption of the Nd^(3+)emissions and cross-relaxation processes.A decrease of the relative sensitivity of the ratio^(4)f_(5/2)→^(4)I_(9/2)/^(4)f_(3/2)→^(4)I_(9/2)is observed for samples doped with higher amounts of Nd^(3+).The maximum relative sensitivity at 299 K is 3.00%/K,which is the highest value among the reported Nd^(3+)ions.

关键词： Nd^(3+)-doped tellurite glass fluorescence intensity ratio Optical thermometry Judd-Ofelt Rare earths

A comprehensive review on the processing-property relationships of laser strengthened magnesium

在线全文

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第1期12卷 1-34页

作者： Alessandro m.Ralls Aaksheta Agnel Pradeep l.menezes Department of mechanical Engineering University of Nevada RenoRenoNV 89557United States

Among the existing series of softer metals,magnesium(mg)has attracted much attention due to its impressive strength-to-weight ***,due to its ease of deformability,mg tends to suffer from rapid degradation in a wide variety of abrasive and electrochemical *** method of improving its surface properties is through surface modification *** the existing techniques,laser shock peening(lSP)has been one of the most widely utilized processes due to its surface-hardening-like *** this understanding,a comprehensive review has yet to exist that encapsulates the strengthening mechanism of lSP for mg and its influence in degradation *** review aims to encapsulate the existing research around the lSP field for ***,an understanding of the surface-strengthening effects in relation to its mechanical,tribological,corrosion,and tribo-corrosion characteristics is ***,the feasibility of lSP for mg materials in critical industries is also *** this work,a novel understanding of lSP for mg can be understood,which can provide a future direction for research in this field.

关键词： laser shock peening magnesium Surface deformation Tribology microstructure

Corrosion testing of X52 and X80 steels immersed in stimulated emulsions using a real petroleum sample

在线全文

学校读者我要写书评

暂无评论

Petroleum Research 2024年第2期9卷 304-316页

作者： l.m.Quej-Ake J.l.Alamilla A.Contreras Instituto mexicano del Petróleo Eje Central Lázaro CárdenasNorte 152San Bartolo AtepehuacanGustavo A.MaderoCiudad de MéxicoC.P.07730México

The aim of this study is to evaluate the internal corrosion process on X52 and X80 steels/real petroleum interfaces containing condensed hydrocarbon plus oilfield-produced water,which were subjected to stimulated emulsions using 50/50 vol ratio mixtures at 45℃,different hydrodynamic conditions,1 h,and 24 h.A washing process by using deionized water was proposed to simulate and identify the corrosiveness of the hydrocarbon phase after 24 h of exposure *** characterization by electrochemical impedance spectroscopy and the monitoring of the polarization curves indicated that X80 steel/oilfield-produced water interfaces were more susceptible to corrosion than X52 steel exposed to oilfield-produced *** combined speed rotation of 600 rpm using a magnetic stirrer+600 rpm using a rotating disk electrode decreased the corrosion rate on X52 *** stimulated emulsions made of hydrocarbon+oilfield-produced water and hydrocarbon+deionized water at 24 h increased the corrosion rate on X80 steel(0.34 mm/year and 0.43 mm/year,respectively),promoting the formation of erosion and pitting *** types of corrosion depended mainly on the physicochemical properties of the hydrocarbon,oilfield-produced water,exposure times,and hydrodynamic systems in which the hydrocarbon was studied.

关键词： Corrosion Emulsions X52 steel X80 steel

Spark Plasma Sintering of mg-based Alloys:microstructure,mechanical Properties,Corrosion Behavior,and Tribological Performance

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第2期12卷 405-442页

作者： Alessandro m.Ralls mohammadreza Daroonparvar Pradeep l.menezes Department of mechanical Engineering University of Nevada RenoRenoNV89557United States

Within the past ten years,spark plasma sintering(SPS)has become an increasingly popular process for mg *** the SPS process,interparticle diffusion of compressed particles is rapidly achieved due to the concept of Joule *** to traditional and additive manufacturing(Am)techniques,SPS gives unique control of the structural and microstructural features of mg *** doing so,their mechanical,tribological,and corrosion properties can be *** great advancements in this field have been made,these pieces of knowledge are scattered and have not been contextualized into a single *** motivation of this work is to address this scientific gap and to provide a groundwork for understanding the basics of SPS manufacturing for *** do so,the existing body of SPS mg literature was first surveyed,with a focus on their structural formation and degradation *** was found that successful mg SPS fabrication highly depended on the processing temperature,particle size,and particle *** addition of metal and ceramic composites also affected their microstructural features due to the Zener pinning *** degradative environments,their performance depends on their structural features and whether they have secondary phased *** industrial applications,SPS'd mg was found to have great potential in biomedical,hydrogen storage,battery,automotive,and recycling *** prospects to advance the field include using mg as a doping agent for crystallite size refinement and using bulk metallic mg-based glass powders for amorphous SPS *** these findings,the interactions of multi-composites on the processing-structure-property relationships of SPS mg is not well *** total,this work will provide a useful direction in the SPS field and serve as a milestone for future mg-based SPS manufacturing.

关键词： Spark plasma sintering magnesium alloys Nanocrystalline Tribology mechanical properties Corrosion