检索结果-南通市图书馆

New Nanocomposite Materials by Incorporation of Nanocrystalline TiO_2 Particles into Polyaniline Conductive films

journal of Materials Science & Technology 2014年第5期30卷 449-454页

作者： f.j.feliciano O.C.Monteiro Department of Chemistry and Biochemistry and CQB Faculty of SciencesUniversity of LisbonCampo Grande1749-016 LisbonPortugal

This work is focused on the combination of two building-blocks, nanocrystalline TiO2 particles and polyaniline conductive films （PAni）. The preparation of new nanostructured composite materials, displaying electron- and proton-conductive properties, to be used for the fabrication of new and superior energy storage devices was envisaged. The semiconducting TiO2 nanoparticles were obtained by means of a hydrothermal route. The PAni films were prepared on glassy carbon electrodes by electrochemical polymerization, under potential dynamic conditions. After characterization by X-ray diffraction, transmission electron microscopy or scanning electron microscopy and electrochemical techniques, the nanocrystalline particles were immobilized in the polymer matrix. The incorporation of the TiO2 was achieved using two distinct approaches： during the polymer growth or by deposition over previously prepared PAni films. The results demonstrate that the PAni morphology depends on the experimental conditions used during the polymer growth. After TiO2 immobilization, the best electrochemical response was obtained for the nanocomposite structure produced through the TiO2 incorporation after the PAni film synthesis. The modified electrodes were structurally and morphologically characterized and their electro-catalytic activity towards the hydrogen evolution reaction was analyzed. A new electrochemical performance related with the oxidation of molecular hydrogen entrapped in the PAni-TiO2 matrix was observed for the modified electrode after TiO2 incorporation. This behavior can be directly associated with the synergetic combination of the TiO2 and PAni, and is dependent on the amount of the semiconductor.

关键词： PolyaniHne (PAni) Nanosized TiO2 Nanocomposites Hydrogen trapping

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

引用

journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： Y.B.Zhang S.j.Song f.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPfE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

On the analytical solution of transient friction in channel flows

引用

Applied Mathematics and Mechanics(English Edition) 2024年第8期45卷 1447-1466页

作者： f.j.GARCíA-GARCíA P.fARINAS-ALVARINO Department of Naval&Industrial Engineering Polytechnic School of EngineeringUniversity of A CorunaCampus Industrial de FerrolFerrol 15403A CorunaSpain Integraciones Técnicas de Seguridad S.A.Pol.Ind.Espiritu SantoC/Nobel15Cambre 15650A CorunaSpain

The transient friction in channel mean flows is the sum of two contributions,i.e.,the underlying laminar flow(ULf)and the purely turbulent component(PTC),and the contributions are analyzed separately by theoretical *** is found that,the transient friction may be higher or remarkably lower than that in equal-Reynolds number steady-state *** universal time constant for plane-parallel laminar flows is reported,and the role of the time constant in a turbulent mean flow is *** is shown that the time constant is related to the turbulence's frozen ***,a study of the logarithmic layer during the transient flow is accomplished,which shows that the logarithmic layer is destroyed.

关键词： transient friction transient flow unsteady channel flow

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Inflow and outflow permeability tests in a very soft clay under low stresses

引用

journal of Rock Mechanics and Geotechnical Engineering 2024年第8期16卷 3270-3283页

作者： j.W.S.Vargas f.A.B.Danziger f.R.Lopes T.Lunne federal University of Rio de janeiro Rio de JaneiroBrazil Norwegian Geotechnical Institute OsloNorway

In situ inflow and outflow permeability tests with the BAT probe at SarapuíII soft clay test site are presented.A description of the BAT permeability test is provided,discussing its advantages and shortcomings,especially in the case of very soft clays under low *** pressures were monitored during probe installation and were found to be slightly lower than piezocone u2 pore pressures,consistent with the position of the *** role of filter tip saturation was investigated after the usual saturation procedure provided an unsatisfactory pore pressure response during probe *** show that the vacuum saturation procedure provides adequate response during installation and increases the reliability of the coefficient of permeability determination in early *** inflow and outflow tests yielded similar results,indicating that careful execution of the test can lead to good test repeatability regardless of the loading *** sequences of alternated inflow and outflow tests have yielded similar results,indicating that soil reconsolidation and filter clogging were negligible in the tests *** are presented concerning the relationship between index parameters and the in situ coefficient of permeability for SarapuíII clay,which plot outside the range of existing databases.

关键词： Permeability test Soft clay BAT probe Inflow and outflow tests

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thermoluminescence characterization of natural and synthetic irradiated Ce-monazites

引用

journal of Rare Earths 2024年第4期42卷 643-650页

作者： V.Correcher C.Boronat j.Garcia-Guinea j.f.Benavente T.Rivera-Montalvo CIEMAT Av.Complutense 4028040MadridSpain MNCN-CSIC J.Gutierrez Abascal 228006MadridSpain Instituto Politécnico Nacional CICATA-IPNAv.Legaria 694Mexico City11500Mexico

The thermoluminescence(TL)emission of synthetic and natural Ce-monazites was characterized here to determine the potential application in the identification of microscopic defects from a qualitative point of view trying to link each TL peak to a chemical-physical *** kinetic parameters that lead the luminescence processes were calculated by means of variable heating rate and computing glow curve deconvolution methods and allow identifying three groups of components at~90,130 and 290℃(for the mineral sample)and~90,170,220,270 and 320℃(for the synthetic CePO_(4):Nd_(0.20),La_(0.25)).The main differences appreciated in these complex TL curves are mainly due to(i)the content of impurities(natural sample contains lanthanides as well as U 0.60%and Th 5.22%)and(ii)the degree of crystallinity of the samples which is directly related to the type of impurities(synthetic monazite relies only on Nd and La).The behavior of the dose response in the range of 1-8 Gy is similar for both samples;the TL intensity increases linearly as the dose increases without changes in the position of the maxima,denoting first-order kinetic luminescence *** peak could be mostly associated with structural defects(i.e.,phase transitions),chemical reactions(i.e.,Ce3+?Ce4+redox reaction,dehydration or dehydroxylation processes)or intrinsic defects(i.e.,frenkel defects,ODCs or NBOHCs).

关键词： Thermoluminescence Kineticparameters Phosphate Ce-monazite Defects Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Stochastic seismic inversion and Bayesian facies classification applied to porosity modeling and igneous rock identification

引用

Petroleum Science 2024年第2期21卷 918-935页

作者： fábio júnior Damasceno fernandes Leonardo Teixeira Antonio fernando Menezes freire Wagner Moreira Lupinacci Exploratory Interpretation and Reservoir Characterization Group(GIECAR) Department of Geology and GeophysicsFederal Fluminense UniversityNiter oiRJ24210-346Brazil Petrobras Rio de JaneiroRJ20231-030Brazil National Institute of Science and Technology of Petroleum Geophysics(INCT-GP/CNPQ) Niter oiRJ24210-346Brazil

We apply stochastic seismic inversion and Bayesian facies classification for porosity modeling and igneous rock identification in the presalt interval of the Santos Basin. This integration of seismic and well-derived information enhances reservoir characterization. Stochastic inversion and Bayesian classification are powerful tools because they permit addressing the uncertainties in the model. We used the ES-MDA algorithm to achieve the realizations equivalent to the percentiles P10, P50, and P90 of acoustic impedance, a novel method for acoustic inversion in presalt. The facies were divided into five: reservoir 1,reservoir 2, tight carbonates, clayey rocks, and igneous rocks. To deal with the overlaps in acoustic impedance values of facies, we included geological information using a priori probability, indicating that structural highs are reservoir-dominated. To illustrate our approach, we conducted porosity modeling using facies-related rock-physics models for rock-physics inversion in an area with a well drilled in a coquina bank and evaluated the thickness and extension of an igneous intrusion near the carbonate-salt interface. The modeled porosity and the classified seismic facies are in good agreement with the ones observed in the wells. Notably, the coquinas bank presents an improvement in the porosity towards the top. The a priori probability model was crucial for limiting the clayey rocks to the structural lows. In Well B, the hit rate of the igneous rock in the three scenarios is higher than 60%, showing an excellent thickness-prediction capability.

关键词： Stochastic inversion Bayesian classification Porosity modeling Carbonate reservoirs Igneous rocks

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Modelling dynamic pantograph loads with combined numerical analysis

引用

Railway Engineering Science 2024年第1期32卷 81-94页

作者： f.f.jackson R.Mishra j.M.Rebelo j.Santos P.Antunes j.Pombo H.Magalhaes L.Wills M.Askill School of Computing and Engineering University of HuddersfieldHuddersfieldUK School of Computing and Engineering Institute of Railway ResearchUniversity of HuddersfieldHuddersfieldUK IDMEC Instituto Superior TecnicoUniversidade de LisboaLisbonPortugal ISEL Instituto Politecnico de LisboaLisbonPortugal Hitachi Rail Newton AycliffeUK Wabtec/Brecknell Willis ChardUK

Appropriate interaction between pantograph and catenary is imperative for smooth operation of electric *** heights of overhead lines to accommodate level crossings,overbridges,and tunnels pose significant challenges in maintaining consistent current collection performance as the pantograph aerodynamic profile,and thus aerodynamic load changes significantly with operational *** research aims to analyse the global flow characteristics and aerodynamic forces acting on individual components of an HSX pantograph operating in different configurations and orientations,such that the results can be combined with multibody simulations to obtain accurate dynamic insight into contact ***,computational fluid dynamics simulations are used to investigate the pantograph component loads in a representative setting,such as that of the recessed cavity on a Class 800 *** an aerodynamic perspective,this study indicates that the total drag force acting on non-fixed components of the pantograph is larger for the knuckle-leading orientation rather than the knuckle-trailing,although the difference between the two is found to reduce with increasing pantograph *** the aerodynamic loads acting on individual components with multibody tools allows for realistic dynamic insight into the pantograph *** results obtained show how considering aerodynamic forces enhance the realism of the models,leading to behaviour of the pantograph-catenary contact forces closely matching that seen in experimental tests.

关键词： Pantograph-catenary interaction Pantograph aerodynamics Computational fluid dynamics Pantograph loads Current collection performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mathematical modeling and simulations of stress mitigation by coating polycrystalline particles in lithium-ion batteries

引用

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 947-962页

作者： N.IQBAL j.CHOI S.f.SHAH C.LEE S.LEE Department of Mechanical Roboticsand Energy EngineeringDongguk University-SeoulSeoul 04620Republic of Korea

A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyCo_(z)O_(2)(x≥0.8)(NMC)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary NMC particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more ***,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress *** paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of NMC active particles mitigates stress levels.

关键词： lithium-ion battery(LIB) polycrystalline particle coating finite element simulation Ni-rich LiNixMnyCo_(z)O_(2)(x>0.8)(NMC)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Threshold-Based Software-Defined Networking(SDN)Solution for Healthcare Systems against Intrusion Attacks

引用

Computer Modeling in Engineering & Sciences 2024年第2期138卷 1469-1483页

作者： Laila M.Halman Mohammed j.f.Alenazi Department of Computer Engineering College of Computer ScienceKing Saud UniversityRiyadh11451Saudi Arabia

The healthcare sector holds valuable and sensitive *** amount of this data and the need to handle,exchange,and protect it,has been increasing at a fast *** to their nature,software-defined networks(SDNs)are widely used in healthcare systems,as they ensure effective resource utilization,safety,great network management,and *** this sector,due to the value of thedata,SDNs faceamajor challengeposed byawide range of attacks,such as distributed denial of service(DDoS)and probe *** attacks reduce network performance,causing the degradation of different key performance indicators(KPIs)or,in the worst cases,a network failure which can threaten human *** can be significant,especially with the current expansion of portable healthcare that supports mobile and wireless devices for what is called mobile health,or *** this study,we examine the effectiveness of using SDNs for defense against DDoS,as well as their effects on different network KPIs under various *** propose a threshold-based DDoS classifier(TBDC)technique to classify DDoS attacks in healthcare SDNs,aiming to block traffic considered a hazard in the form of a DDoS *** then evaluate the accuracy and performance of the proposed TBDC *** technique shows outstanding performance,increasing the mean throughput by 190.3%,reducing the mean delay by 95%,and reducing packet loss by 99.7%relative to normal,with DDoS attack traffic.

关键词： Network resilience network management attack prediction software defined networking(SDN) distributed denial of service(DDoS) healthcare

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

引用

journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.f.Wang C.j.Wang W.V.Yue Z.j.Zhang Z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：