检索结果-南通市图书馆

Sensitivity analysis of modeling parameters to soot and PAHs prediction in ethylene inverse diffusion flame

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第2期67卷 486-498页

作者： wu BingKun LI TianJiao LIU dong MIIT Key Laboratory of Thermal Control of Electronic Equipment School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China Advanced Combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and Technology Nanjing 210094China

The soot formation model based on inverse ethylene diffusion flames was performed to study the sensitivity of the soot formation process to the prediction *** effects of efficiency parameters such as soot inception,surface growth and coagulation on the simulation results were studied by using the adjustable efficiency *** addition,the reversible soot model and conjugate heat transfer(CHT)model were also introduced to explore their *** indicated that,among adjustable efficiency parameters,the nucleation efficiency had the greatest influence on the predicted soot and PAHs distributions,while the Habstraction-C2.2.addition(HACA)process and PAH adsorption surface growth efficiencies impacted *** adjustable efficiency parameters had a significant effect on the concentration of soot gaseous precursors and soot particles,but their effects on temperature,gas phase molecules,and intermediate species were not *** the nucleation efficiency increased from 2.10^(-6)to 1×10^(-4),the predicted value of the integrated soot was increased by nearly 50%,and the maximum primary particle number density and the number of aggregates were increased by an order of *** maximum concentration of BAPYR was ***,the peak temperature along the axial direction increased by only 3.5 *** the reversible soot model,the approximation results of the adjustable efficiency parameters could be modified,which showed the feasibility of the *** use of the CHT model promoted pyrolysis of the fuel below the outlet of the fuel tube,with high-temperature zones,soot zones,and PAHs zones moving towards higher flame ***,when using the reversible model and the CHT model,the maximum soot volume fraction decreased by 39%compared with the basic efficiency parameters,while the concentration of BAPYR increased by 162.,and the concentrations of gas phase species were decreased.

关键词： inverse diffusion flames soot formation soot model ethylene

Study on the force chain characteristics with coal dust layer and the three-body contact stiffness

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第9期92卷 288-304页

作者： Xinwei Yang dongxuan wu Hongyue Chen dong Wang School of Mechanical Engineering Liaoning Technical UniversityFuxin123000China Ordos Institute of Liaoning Technical University Ordos017000China School of Mining Liaoning Technical UniversityFuxin123000China China National Coal Association Dynamic Research for High-end Complete Integrated Coal Mining Equipment and Big Data Analysis CentreFuxin123000China

To explore the influence of the meso-mechanical behaviors of the wet coal dust layers on the contact stiffness of mechanical bonding surfaces,a three-body contact model incorporating an interface with wet coal dust was constructed based on breakage *** model considered the mechanical surface morphology and contact characteristics of the wet coal *** force chain evolution laws of the wet coal dust layer were elucidated under the effects of gap filling and the cover layer,and the bearing characteristics of the three-body contact bonding surfaces were revealed by quantitative analyses of the number,length,collimation coefficient,and coordination number of the force chains within the wet coal dust ***,the three-body normal contact stiffness under various preload forces was computed and experimentally *** results demonstrate that the external load transfer path of the three-body contact bonding surfaces was from mechanical surface(macroscopic stress)to wet coal dust layer(mesoscopic force chains)and then to mechanical surface(peaks and valleys).The interactions among these three elements contributed to transforming the distributions of the macroscopic stresses and mesoscopic force chains to the locations at the peaks and valleys of the mechanical *** them,the proportion of short force chains in the wet coal dust layer increased from approximately 0.8%–91%,while the proportion of long force chains exhibited an opposite changing *** force chain collimation coefficient initially increased and subsequently stabilized,reaching a maximum value of 0.93.A large number of broken,small particles in the wet coal dust layer mainly served to fill the gaps among large *** maximum relative error between the experimental and simulated values on the three-body contact stiffness is 7.2.%,indicating that the simulation results can be an approximate substitute for the experimental results with a certain degree of accuracy and practic

关键词： Wet coal dust Force chain Three-body contact stiffness Gap flling effect Cover layer effect

Brain Cognition Mechanism-Inspired Hierarchical Navigation Method for Mobile Robots

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第2期21卷 852-865页

作者： Qiang Zou Chengdong wu Ming Cong dong Liu Faculty of Robot Science and Engineering Northeastern UniversityShenyang110819China School of Mechanical Engineering Dalian University of TechnologyDalian116024China

Autonomous navigation is a fundamental problem in *** methods generally build point cloud map or dense feature map in perceptual space;due to lack of cognition and memory formation mechanism,traditional methods exist poor robustness and low cognitive *** a new navigation technology that draws inspiration from mammal’s navigation,bionic navigation method can map perceptual information into cognitive space,and have strong autonomy and environment *** improve the robot’s autonomous navigation ability,this paper proposes a cognitive map-based hierarchical navigation ***,the mammals’navigation-related grid cells and head direction cells are modeled to provide the robots with location *** then a global path planning strategy based on cognitive map is proposed,which can anticipate one preferred global path to the target with high efficiency and short ***,a hierarchical motion controlling method is proposed,with which the target navigation can be divided into several sub-target navigation,and the mobile robot can reach to these sub-targets with high confidence ***,some experiments are implemented,the results show that the proposed path planning method can avoid passing through obstacles and obtain one preferred global path to the target with high efficiency,and the time cost does not increase extremely with the increase of experience nodes *** motion controlling results show that the mobile robot can arrive at the target successfully only depending on its self-motion information,which is an effective attempt and reflects strong bionic properties.

关键词： Bionic navigation Spatial localization cells Global path planning Hierarchical motion controlling

Investigation of high rate mechanical flow followed by ignition for high-energy propellant under dynamic extrusion loading

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 336-347页

作者： Liying dong Yanqing wu Kun Yang Xiao Hou State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China

Investigating the ignition response of nitrate ester plasticized polyether(NEPE) propellant under dynamic extrusion loading is of great significant at least for two cases. Firstly, it helps to understand the mechanism and conditions of unwanted ignition inside charged propellant under accident ***, evaluates the risk of a shell crevice in a solid rocket motor(SRM) under a falling or overturning scene. In the present study, an innovative visual crevice extrusion experiment is designed using a dropweight apparatus. The dynamic responses of NEPE propellant during extrusion loading, including compaction and compression, rapid shear flow into the crevice, stress concentration, and ignition reaction, have been firstly observed using a high-performance high-speed camera. The ignition reaction is observed in the triangular region of the NEPE propellant sample above the crevice when the drop weight velocity was 1.90 m/s. Based on the user material subroutine interface UMAT provided by finite element software LS-DYNA, a viscoelastic-plastic model and dual ignition criterion related to plastic shear dissipation are developed and applied to the local ignition response analysis under crevice extrusion conditions. The stress concentration occurs in the crevice location of the propellant sample, the shear stress is relatively large, the effective plastic work is relatively large, and the ignition reaction is easy to occur. When the sample thickness decreases from 5 mm to 2.5 mm, the shear stress increases from 2..3 MPa to 2..6 MPa, the critical value of effective plastic work required for ignition is shortened from 12.0 μs to 730 μs, and the triangular area is easily triggering an ignition reaction. The propellant sample with a small thickness is more likely to stress concentration, resulting in large shear stress and effective work, triggering an ignition reaction.

关键词： NEPE propellant Crevice extrusion Shear flow Sample thickness Ignition reaction

Method for triangular fuzzy multiple attribute decision making based on two-dimensional density operator method

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Engineering and Electronics 2024年第1期35卷 178-185页

作者： LIN Youliang LI wu LIU Gang HUANG dong School of Economics and Management Hunan Institute of Science and TechnologyYueyang 414000China Hunan Vocational College for Nationalities Yueyang 414000China School of Information Science and Engineering Hunan Institute of Science and TechnologyYueyang 414000China

Aiming at the triangular fuzzy(TF)multi-attribute decision making(MADM)problem with a preference for the distribution density of attribute(DDA),a decision making method with TF number two-dimensional density(TFTD)operator is proposed based on the density operator theory for the decision maker(DM).Firstly,a simple TF vector clustering method is proposed,which considers the feature of TF number and the geometric distance of ***,the least deviation sum of squares method is used in the program model to obtain the density weight ***,two TFTD operators are defined,and the MADM method based on the TFTD operator is ***,a numerical example is given to illustrate the superiority of this method,which can not only solve the TF MADM problem with a preference for the DDA but also help the DM make an overall comparison.

关键词： fuzzy decision making clustering density operator multi-attribute decision making(MADM)

Double-stranded DNA-nucleic acid dye complex-sensitized biocatalytic photosynthesis:Base pairing-switched regeneration of nicotinamide cofactor

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 618-624页

作者： Zhen dong Yanying Wang Dan Li Peng wu College of Chemistry Sichuan UniversityChengdu 610064SichuanChina Analytical&Testing Centre State Key Laboratory of Hydraulics and Mountain River EngineeringSichuan UniversityChengdu 610064SichuanChina School of Chemistry and Chemical Engineering Henan Normal UniversityXinxiang 453007HenanChina

Photo-biocatalysis,the combination of photosensitization and biocatalysis,is an emerging solution for sunlight-based renewable *** is thus important to develop light antennas with both good light har-vesting and efficient electron ***,the intriguing electrical conductivity of dsDNA and its host effect(for nucleic acid dyes to harvest light)were explored simultaneously to develop a dsDNA-based light antenna for *** SYBR Green I(SG)as the example of the nucleic acid dye,the proposed SG-dsDNA system was found to be capable for visible-light-driven reduced nicotinamide adenine dinucleotide(NADH)regeneration,and the turnover frequency of which(1.35 min^(-1))exceeded most of the existing photocatalytic *** SG can only be hosted by dsDNA,meanwhile dsDNA can be formed through hybridization between single strand DNA and its complementary strand,the pro-posed system adds an extra control of the photocatalytic activity(DNA base pairing-based switch).When integrating the SG-dsDNA system with NADH-dependent horse liver alcohol dehydrogenase(HLADH),successful synthesis of 2.phenylpropanol(a crucial intermediates of profens manufacturing)was achieved.

关键词： Photosynthesis dsDNA SYBRGreenI TICT 2.phenylpropanol

Effects of Aging at 550℃ on α'-Martensitic Transformation of High Si-Bearing Metastable Austenitic Stainless Steel Weld Metal

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1467-1479页

作者： Yakui Chen Shitong Wei dong wu Shanping Lu Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang110016China CAS Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang110016China

The high Si-bearing 15Cr-9Ni-Nb metastable austenitic stainless steel weld metal was prepared via gas tungsten arc welding and then processed by stabilized heat treatment(SHT)at 850℃ for 3 *** effects of 550℃ aging on the α'-martensitic transformation of the as-welded and the SHT weld metals were *** results showed that the weld metal had poor thermal stability of *** precipitation of NbC during the 850℃ SHT made the thermal stability of the local matrix decrease and led to the formation of a large amount of C-depleted α'-*** precipitation of coarse σ-phase at the δ-ferrite led to the Cr-depleted zone and the formation of Cr-depleted α'-martensite at the early stage of 550℃ *** homogenized diffusion of C and Cr in the matrix during 550℃ aging led to the restoration of austenitic thermal stability and the decrease of α'-martensite *** C-depleted α'-martensite content in the SHT weld metal decreased rapidly at the early stage of aging due to the fast diffusion rate of the C atom in the matrix,while the Cr-depleted α'-martensite decreased at the later stage of aging due to the decreased diffusion rate of the Cr.

关键词： Metastable austenitic stainless steel weld metal α'-martensitic transformation δ-ferrite σ-phase

Noise Effect on the 2. Stochastic Burgers Equation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第9期40卷 2065-2090页

作者： Zhao dong Jiang Lun wu Guo Li ZHOU RCSDS Academy of Mathematics and Systems ScienceChinese Academy of SciencesBeijing 100190P.R.China Beijing Normal University-Hong Kong Baptist University United International College Zhuhai 519087P.R.China Guangdong Provincial Key Laboratory of Interdisciplinary Research and Application for Data Science(IRADS) UICZhuhai 519087P.R.China School of Statistics and Mathematics Chongqing University Key Laboratory of Nonlinear Analysis and Its Applications(Chongqing University) Ministry of EducationChongqing 400044P.R.China

By comprehensive utilizing of the geometry structure of 2. Burgers equation and the stochastic noise,we find the decay properties of the solution to the stochastic 2. Burgers equation with Dirichlet boundary ***,the e... 详细信息

关键词： 2. stochastic Burgers equation regularity

Ergodicity of 3D Stochastic Burgers Equation

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第2期40卷 498-510页

作者： Zhao dong Jiang Lun wu Guo Li ZHOU RCSDS Academy of Mathematics and Systems ScienceChinese Academy of SciencesBeijing 100190P.R.China Department of Mathematics Computational FoundrySwansea UniversitySwansea SA18ENUK College of Mathematics and Statistics Chongqing UniversityChongqing 400044P.R.China

3D Burgers equation is an important model for *** is natural to expect the long-time behaviour for this hydrodynamics ***,there is no result about the long-time behaviour for this deterministic ***,if the system is perturbed by stochastic noise,we establish the existence and uniqueness of invariant measure for 3D stochastic Burgers equation.

关键词： 3D stochastic Burgers equations maximum principle ergodicity