检索结果-南通市图书馆

Insect Science 2008年第5期15卷 415-422页

作者： dong hun kim Sang-Chul Lee Do-Yeon Kwak Kyeong-Yeoll Lee School of Applied Biosciences College of Agricultura and Life Sciences Kyungpook National University Daegu Yeongnam Agricultural Research Institute Milyang Republic of Korea

Three heat shock protein （HSP） genes （hsp70, hsc70, hsp90） were partially cloned from the brown planthopper Nilaparvata lugens and the small brown planthopper Laodelphax striatellus （Homoptera： Delphacidae）, which are serious pests of the rice plant. Sequence comparisons at the deduced amino acid level showed that the three HSPs of planthoppers were most homologous to corresponding HSPs of dipteran and lepidopteran species. Identities of both heat shock cognate 70 and HSP90 were higher than HSP70 in both species. Identity of the HSP70 between the two planthopper species was only 81%, a value much lower than seen among fly and moth groups. Effects of heat and cold shocks were demonstrated on expression of the three hsp genes in the two planthopper species. Heat shock （40 ℃） upregulated the hsp90 level but did not change the hsc70 level in either the nymph and adult stages of either species. On the other hand, the hsp70 level was only upregulated in L. striatellus. This heat shock response was prompt and lasted only for 1 h after treatment. In contrast, cold shock at 4℃ did not change the expression levels of any hsp in either species.

关键词： cold shock gene expression heat shock heat shock protein genes planthoppers thermal stress

Dual-frequency piezoelectric micromachined ultrasound transducer based on polarization switching in ferroelectric thin films

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2023年第5期9卷 233-243页

作者： Jin Soo Park Soo Young Jung dong hun kim Jung Ho Park Ho Won Jang Tae Geun kim Seung-Hyub Baek Byung Chul Lee Bionics Research Center Korea Institute of Science and TechnologySeoul 02792Republic of Korea Department of Electrical Engineering Korea UniversitySeoul 02841Republic of Korea Center for Electronic Materials Korea Institute of Science and TechnologySeoul 02792Republic of Korea Department of Material Science and Engineering Seoul National UniversitySeoul 08826Republic of Korea Division of Bio-Medical Science and Technology KIST SchoolUniversity of Science and Technology(UST)Seoul 02792Republic of Korea KHU-KIST Department of Converging Science and Technology Kyung Hee UniversitySeoul 02447Republic of Korea

Due to its additional frequency response,dual-frequency ultrasound has advantages over conventional ultrasound,which operates at a specific frequency ***,a tunable frequency from a single transducer enables sonographers to achieve ultrasound images with a large detection area and high *** facilitates the availability of more advanced techniques that simultaneously require low-and high-frequency ultrasounds,such as harmonic imaging and image-guided *** this study,we present a novel method for dual-frequency ultrasound generation from a ferroelectric piezoelectric micromachined ultrasound transducer(PMUT).Uniformly designed transducer arrays can be used for both deep low-resolution imaging and shallow high-resolution *** switch the ultrasound frequency,the only requirement is to tune a DC bias to control the polarization state of the ferroelectric *** vibration of the PMUT membrane strongly depends on the polarization state,producing low-and high-frequency ultrasounds from a single excitation *** strategy for dual-frequency ultrasounds meets the requirement for either multielectrode configurations or heterodesigned elements,which are integrated into an ***,this technique significantly reduces the design complexity of transducer arrays and their associated driving circuits.

关键词： piezoelectric ferroelectric enable

Aligned Ion Conduction Pathway of Polyrotaxane‑Based Electrolyte with Dispersed Hydrophobic Chains for Solid‑State Lithium–Oxygen Batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 169-186页

作者： Bitgaram kim Myeong‑Chang Sung Gwang‑Hee Lee Byoungjoon Hwang Sojung Seo Ji‑hun Seo dong‑Wan kim Department of Materials Science and Engineering Korea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea School of Civil Environmental and Architectural EngineeringKorea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea Materials Science and Chemical Engineering Center Institute for Advanced Engineering(IAE)Yongin 17180Republic of Korea

A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety *** study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves ***-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain *** this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 *** situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen *** situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability *** present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.

关键词： Solid polymer electrolyte Lithium-oxygen batteries Polyrotaxane ion conductivity Hydrophobic chain

Study on the Wiping Gas Jet in Continuous Galvanizing Line

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2011年第3期20卷 242-247页

作者： Yong-hun Kweon Heuy-dong kim POSCO Technical Research Laboratories 699 Gumho-dong GwangyangJeonnam 545-090 Korea School of Mechanical Engineering Andong National UniversityAndong 760-749 Korea

In the continuous hot-dip galvanizing process, the gas-jet wiping is used to control the coating thickness of moving steel strip. The high speed gas-jet discharged from the nozzle slot impinges on the strip, and at this moment, wipes the liquid coating layer dragged by a moving strip. The coating thickness is generally influenced on the flow characteristics of wiping gas-jet such as the impinging pressure distribution, pressure gradient and shear stress distribution on the surface of strip. The flow characteristics of wiping gas-jet mentioned above depends upon considerably both the process operating conditions such as the nozzle pressure, nozzle-to-strip distance and line speed, and the geometry of gas-jet wiping apparatus such as the height of nozzle slot. In the present study, the effect of the geometry of nozzle on the coating thickness is investigated with the help of a computational fluid dynamics method. The height of nozzle slot is varied in the range of 0.6mm to 1.7mm. A finite volume method (FVM) is employed to solve two-dimensional, steady, compressible Navier-Stokes equations. Based upon the results obtained, the effect of the height of nozzle slot in the gas-jet wiping process is discussed in detail. The computational results show that for a given standoff distance between the nozzle to the strip, the effective height of nozzle slot exists in achieving thinner coating thickness.

关键词： Gas-Jet Wiping Hot-Dip Galvanizing Impact Pressure Coating Thickness

A Flexible Smart Healthcare Platform Conjugated with Artificial Epidermis Assembled by Three‑Dimensionally Conductive MOF Network for Gas and Pressure Sensing

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 601-620页

作者： Qingqing Zhou Qihang Ding Zixun Geng Chencheng Hu Long Yang Zitong Kan Biao dong Miae Won Hongwei Song Lin Xu Jong Seung kim State Key Laboratory of Integrated Optoelectronics College of Electronic Science and EngineeringJilin UniversityChangchun 130012People’s Republic of China Department of Chemistry Korea UniversitySeoul 02841Republic of Korea TheranoChem Incorporation Seoul 02856Republic of Korea

The rising flexible and intelligent electronics greatly facilitate the noninvasive and timely tracking of physiological information in telemedicine *** building bionic-sensitive moieties is vital for designing efficient electronic skin with advanced cognitive functionalities to pluralistically capture external ***,realistic mimesis,both in the skin’s three-dimensional interlocked hierarchical structures and synchronous encoding multistimuli information capacities,remains a challenging yet vital need for simplifying the design of flexible logic ***,we construct an artificial epidermal device by in situ growing Cu_(3)(HHTP)_(2) particles onto the hollow spherical Ti_(3)C_(2)T_(x) surface,aiming to concurrently emulate the spinous and granular layers of the skin’s *** bionic Ti_(3)C_(2)T_(x)@Cu_(3)(HHTP)_(2) exhibits independent NO_(2) and pressure response,as well as novel functionalities such as acoustic signature perception and Morse code-encrypted message ***,a wearable alarming system with a mobile application terminal is self-developed by integrating the bimodular senor into flexible printed *** system can assess risk factors related with asthmatic,such as stimulation of external NO_(2) gas,abnormal expiratory behavior and exertion degrees of fingers,achieving a recognition accuracy of 97.6%as assisted by a machine learning *** work provides a feasible routine to develop intelligent multifunctional healthcare equipment for burgeoning transformative telemedicine diagnosis.

关键词： Ti_(3)C_(2)T_(x)@Cu_(3)(HHTP)_(2)composites NO_(2)/pressure flexible sensors Health-monitoring Machine learning

Study of Spiral Flow Generated through an Annular Slit

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2005年第2期14卷 97-102页

作者： Tae hun kim Shigeru MATSUO Toshiaki SETOGUCHI Heuy-dong kim Graduate school of Science and Technology Saga University 1Honjo-machiSaga shiSaga 840-8502JapanDepartment of Mechanical Engineering Saga University1Honjo-machiSaga shiSaga 840-8502JapanDepartment of Mechanical Engineering Saga University1Honjo-machiSaga shiSaga 840-8502JapanSchool of Mechanical Engineering College of Natural ScienceAndong National University388Song Cheon DongAndongKyung PookKorea

The effect of pressurized air inlets in the reservoir upstream of the annular slit on characteristics of the axial and tangential velocity components is investigated numerically, and the mechanism of occurrence of spiral nozzle flow is clarified. In simulations, Unified Platform for Aerospace Computational Simulation (UPACS) is used. The governing equations under consideration are the unsteady compressible Navier - Stokes. A second-order finite volume scheme with MUSCL (Roe scheme) is used to discretize the spatial derivatives, and a second order-central difference scheme for the viscous terms, and a MFGS (Matrix Free Gauss Seidel) is employed for time integration. Spalart-Allmaras model was used as a turbulence model. The results obtained are compared with velocity distributions in the experiment measured by the two-component fiber optic laser Doppler velocimeter system. The existence of discrete pressurized air inlets that leads to the occurrence of asymmetrical characteristics is a very important factor for the formation of spiral flow.

关键词： spiral nozzle flow Coanda effect convergent nozzle annular slit simulation.

Effect of Nozzle Geometry on the Flow Characteristics of Spiral Flow Generated through an Annular Slit

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2007年第2期16卷 149-154页

作者： Shigeru MATSUO Tae-hun kim Toshiaki SETOGUCHI Heuy dong kim Yeon-Won LEE Department of Mechanical Engineering Saga University1Honjo-machiSaga-shiSaga 840-8502Japan Graduate school of Science and Technology Saga University1Honjo-machiSaga shiSaga 840-8502Japan School of Mechanical Engineering Andong National University388Songchun-dongAndong 760749Korea School of Mechanical Engineering College of EngineeringPukyong National UniversitySan 100Young-Dang DongBusanKorea

In comparison with previous researches of swirling flow, spiral flow generated in the spiral nozzle has some different flow characteristics. It does not need a forced tangential momentum to generate its velocity and has some different merits from the swirling flow such as long potential core and low tangential velocity. In this study, the effect of nozzle geometry on the flow characteristics in spiral nozzle was investigated by experiment and computation. As a result, the flow characteristics obtained by experiment has a satisfactory agreement with computational results, quantitatively and qualitatively.

关键词： nozzle flow characteristics momentum numerical simulation

Cryptanalysis of the obfuscated round boundary technique for whitebox cryptography

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2020年第3期63卷 257-265页

作者： Yongjin YEOM dong-Chan kim Chung hun BAEK Junbum SHIN Department of Information Security Cryptology and Mathematics Kookmin University Samsung Research Samsung Electronics

Dear editor,The security of cryptographic techniques heavily relies on the confidentiality of the key, and everything except keys can be made open to public without affecting security. When working with cryptographic services, we must protect the keys from a variety of attackers, including eavesdroppers and malware. A whitebox adversary is an attacker

关键词： II Cryptanalysis of the obfuscated round boundary technique for whitebox cryptography

A Study of the Impulse Wave Discharged from the Exits of Two Parallel Tubes

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2003年第4期12卷 332-336,356页

作者： Yong-hun Kweon Heuy-dong kim Toshiaki Setoguchi Toshiyuki Aoki School of Mechanical Engineering Andong National University Andong 760-749 KoreaSchool of Mechanical Engineering Andong National University Andong 760-749 KoreaDepartment of Mechanical Engineering Saga University Honjo Saga 840-8502 JapanDepartment of Energy Science and Engineering Kyushu University Kasuga Fukuoka 816-8580 Japan

The twin impulse wave leads to very complicated flow fields, such as Mach stem, spherical waves, and vortex ring. The twin impulse wave discharged from the exits of the two tubes placed in parallel is investigated to understand the detailed flow physics associated with the twin impulse wave, compared with those in a single impulse wave. In the current study, the merging phenomena and propagation characteristics of the impulse waves are investigated using a shock tube experiment and by numerical computations. The Harten-Yee''s total variation diminishing (TVD) scheme is used to solve the unsteady two-dimensional compressible Euler equations. The Mach number Ms of incident shock wave is changed below 1.5 and the distance between two-parallel tubes, L/d, is changed from 1.2 to 4.0. In the shock tube experiment, the twin impulse waves are visualized by a Schlieren optical system for the purpose of validation of computational work. The results obtained show that on the symmetric axis between two-parallel tubes, the peak pressure produced by the twin impulse waves and its location strongly depend upon the distance between two-parallel tubes, L/d and the incident shock Mach number, Ms. The predicted Schlieren images represent the measured twin-impulse wave with a good accuracy.

关键词： compressible flow unsteady flow impulse wave shock wave shock tube.

Enhanced Oxidation Resistance of Iron Nanoparticles via Surface Modification in Chemical Vapor Condensation Process

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2010年第4期26卷 367-370页

作者： dong-Won Lee Ji-hun Yu Taesuk Jang Byoung-Kee kim Korea Institute of Materials Science Changwon 641-831 Korea Department of Electronic Materials Sunmoon University Asan 336-708 Korea 不详

In order to prevent the oxide formation on the surface of nano-size iron particles and thereby to improve the oxidation resistance in ordinary condition, iron nanoparticles synthesized by a chemical vapor condensation method were directly soaked in hexadecanethiol solution to coat them with a polymer layer. Oxygen content in the polymer-coated iron nanoparticles was significantly lower than that in usual air-passivated particles possessing iron-core/oxide-shell structure. Accordingly, oxidation resistance of the polymer-coated particles at an elevated temperature below 130℃ in air was 10-40 times higher than that of the normally passivated particles.

关键词： Powder technology Nano materials Iron Chemical vapor condensation