检索结果-南通市图书馆

Journal of Forestry Research 2017年第5期28卷 1007-1018页

作者： do-hyun kim Sung-Jun Na Sea-hyun kim Ewane Basil Ewane Dae-Bong Kang do-hyung Lee Department of Forest Resources Yeungnam University Department of Forest Genetic Resources National Institute of Forest Science

We estimated the growth volume of artificially reforested Pinus densiflora in a post-fire area on three different contour conditions by comparing and analyzing the vertical and horizontal distributions of below-ground roots on each contour. The main roots at the south-facing slope (SS) developed in a long and straight form, and those on the north-facing slope (NS) in a twisted form. The side roots developed more than the main roots on the Ridge. The depth of taproots decreased in the following order: SS > NS > Ridge. The roots on the SS developed in a pile-form root structure whereas those in the Ridge and NS developed concentrically near the root collar. The amount of root development decreased in the following order: SS > NS > Ridge. The ratio of fine roots from the whole-root development decreased in the following order: Ridge > SS > NS. These results can guide considerations of growth differences according to the planting contour conditions for future establishment of P. densiflora artificial plantations.

关键词： Pinus densiflora Growth characteristics Contour conditions Post-fire plantation Wildfire Restoration Soil depth

Fiber-optic Fourier-domain common-path OCT

在线全文

学校读者我要写书评

暂无评论

Chinese Optics Letters 2008年第12期6卷 899-901页

作者： Xuan Liu Xiaolu Li do-hyun kim Ilko Ilev Jin U. Kang Department of Electrical and Computer Engineering Johns Hopkins University 3400 N. Charles Street Baltimore MD 21218 USA Center for Devices and Radiological Health FDA 10903 New Hampshire Avenue Silver Spring MD 20993-0002 USA

We experimentally and theoretically investigated the performance of a fiber-optic based Fourier-domain common-path optical coherence tomography （OCT）. The fiber-optic common-path OCT operated at the 840-nm center wavelength. The resolution of the system was 8.8 μm （in air） and the working depth using a bare fiber probe was approximately 1.5 mm. The signal-to-noise ratio （SNR） of the system was analyzed. OCT images obtained by the system were also presented.

关键词： Fast Fourier transforms Image display Light emitting diodes Multiple scattering Optical coherence tomography Optical devices

Stevia extract enhances the fermentation and functional properties of fermented milk in human colon epithelial cells

在线全文

学校读者我要写书评

暂无评论

Food Bioscience 2023年第3期53卷 2516-2524页

作者： do hyun kim Chang Hee Jeong Seo Gu Han hyun Su Jung Sung Gu Han Department of Food Science and Biotechnology of Animal Resources Konkuk UniversitySeoul05029Republic of Korea Department of Bioresource Industrialization Honam National Institute of Biological Resource(HNIBR)Mokpo58762Republic of Korea

Yogurt or fermented milk(FM)stimulates the production of mucin in the colon epithelium,which helps protect against *** is a natural sweetener containing functional compound,*** the present study,we aimed to investigate the effect of stevia leaves extract(ST)on FM and the health effect of ST-added FM on human colon ***,we investigated the impact of the extracts from stevia leaves on the fermentation and quality characteristics of *** addition,we assessed the impact of ST-supplemented FM on mucin production and its anti-inflammatory properties against Escherichia coli O157:H7 in human colon epithelial cells(HT-29/MTX).The FM was enriched with ST(0-0.5%w/v)and fermented using a mixture of lactic acid bacteria(LAB).A control FM supplemented with 0.5%*** results demonstrated that ST significantly increased the fermentation rate of FM by promoting the growth of *** supplementation resulted in an increase in the titratable acidity,water-holding capacity,total solid content,and viscosity of *** of HT-29/MTX cells with STFM supernatants led to higher mucus production,as evidenced by an increase in the mRNA expression of MUC2,CDX2,and ***,ST-added FM resulted in decreased mRNA levels of TNF-α,IL-1β,and IL-6,and adhesion of *** to HT-29/MTX *** results suggest that consuming ST-added FM may help reinforce the intestinal mucus layer and prevent inflammations related to pathogenic bacteria.

关键词： Stevia Yogurt Fermented milk Lactic acid bacteria Mucin Bacterial adhesion

Innovative confocal laser method for exact dioptric power measurement of intraocular lens implants Invited Paper

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Optics Letters 2008年第12期6卷 876-878页

作者： Ilko K.Ilev Robert W.Faaland do-hyun kim Robert H.James don Calogero Office of Science and Engineering Laboratories Center for Devices and Radiological Health U.S.Food and Drug Administration10903 New Hampshire AvenueSilver Spring Office of Device Evaluation Center for Devices and Radiological Health U.S.Food and Drug Administration9200 Corporate BoulevardRockville

We present a novel confocal laser method （CLM） for precise testing of the dioptric power of both positive and negative intraocular lens （IOL） implants. The CLM principle is based on a simple fiber-optic confocal laser design including a single-mode fiber coupler that serves simultaneously as a point light source used for formation of a collimated Gaussian laser beam, and as a highly sensitive confocal point receiver. The CLM approach provides an accurate, repeatable, objective, and fast method for IOL dioptric power measurement over the range from 0 D to greater than ±30 D under both dry and in-situ simulated conditions.

关键词： Crystalline lens Fiber optic couplers Gaussian beams Intraocular lenses Laser beams Single mode fibers

Design and Analysis of a Gain-scaling Controller Applied to a Chain of Integrator System with Measurement Noise on Feedback Sensor

在线全文

学校读者我要写书评

暂无评论

Journal of Measurement Science and Instrumentation 2010年第4期1卷 376-379页

作者： Jae-seung YOUN hyun-do kim Ho-lim CHOI Dept.of Electrical Engineering Dong-A University

A control problem of a chain of integrator system with measurement noise on feedback sensor is considered. We propose a gain-scaling controller for compensating measurement noise of feedback sensor. Because control systems operate via feedback sensor＇s signal, the measurement noise in sensor＇ signal results in performance degradation or even system failure. Therefore, control systems often demand on compensating measurement noise. Our controller is equipped with a compensator and gain-scaling factor in order to reduce the effect of measurement noise on feedback sensor.

关键词： meant noise gain-scaling factor chain of integrator system

High‑Performance Thick Cathode Based on Polyhydroxyalkanoate Binder for Li Metal Batteries

在线全文

学校读者我要写书评

暂无评论

Advanced Fiber Materials 2024年第1期6卷 214-228页

作者： dong Hyuk Kang Minhyuck Park Jeonghun Lee Chan Yeol kim Jimin Park Youn‑Ki Lee Jong Chan hyun Son Ha Jin Hwan Kwak Juhee Yoon Hyemin kim hyun Soo kim do hyun kim Sangmin kim Ji Yong Park Robin Jang Seung Jae Yang Hee‑Dae Lim Se Youn Cho Hyoung‑Joon Jin Seungjin Lee Yunil Hwang Young Soo Yun KU‑KIST Graduate School of Converging Science and Technology Korea University145 Anam‑roSeongbuk‑guSeoul 02841South Korea Carbon Composite Materials Research Center Korea Institute of Science and Technology(KIST)92 Chundong‑roBongdong‑eupWanju‑gunJeollabuk‑do 55324South Korea Energy Storage Research Center Korea Institute of Science and Technology(KIST)514‑gil Hwaraong‑roSeoul 02792South Korea Program in Environmental and Polymer Engineering Inha University100 Inha‑ro Michuhol‑guIncheon 22212South Korea Advanced Analysis Data Center Korea Institute of Science and Technology(KIST)514‑gil Hwaraong‑roSeoul 02792South Korea Advanced Nanohybrids Laboratory Department of Chemistry and Chemical EngineeringInha University100 Inha‑roMichuhol‑guIncheon 22212South Korea CJ CheilJedang Corporation 55 Gwanggyo‑ro 42Beon‑gilYeongtong‑guSuwon 16495South Korea Department of Chemical Engineering Hanyang University222 Wangsimni‑roSeongdong‑guSeoul 04763South Korea Department of Integrative Energy Engineering Korea University145 Anam‑roSeongbuk‑guSeoul 02841South Korea

Thick cathodes can overcome the low capacity issues,which mostly hamper the performance of the conventional active cathode materials,used in rechargeable Li ***,the typical slurry-based method induces cracking and flaking during the fabrication of thick *** addition,a significant increase in the charge-transfer resistance and local cur-rent overload results in poor rate capabilities and cycling stabilities,thereby limiting electrode *** this study,a synergistic dual-network combination strategy based on a conductive nanofibrillar network(CNN)and a nano-bridging amor-phous polyhydroxyalkanoate(aPHA)binder is used to demonstrate the feasibility of constructing a high-performance thick *** CNN and aPHA dual network facilitates the fabrication of a thick cathode(≥250μm thickness and≥90 wt%active cathode material)by a mass-producible slurry *** thick cathode exhibited a high rate capability and excel-lent cycling *** addition,the thick cathode and thin Li metal anode pair(Li//t-NCM)exhibited an optimal energy performance,affording high-performance Li metal batteries with a high areal energy of~25.3 mW h cm^(-2),a high volumetric power density of~1720 W L^(-1),and an outstanding specific energy of~470 W h kg^(-1)at only 6 mA h cm^(-2).

关键词： Thick cathode Polyhydroxyalkanoate binder Nano-bridging Conductive nano-fibrillar network Lithium metal battery

Aging Behavior of Mg-Y-Zr and Mg-Nd-Zr Cast Alloys

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2008年第1期24卷 80-84页

作者： Yang-do kim Nam-hyun Kang Il-Guk Jo Kyung-hyun kim In-Bae kim School of Materials Science and Engineering Pusan National University 30 Jangjun-dongGeumjeong-guBusan 609-735Korea Deptartment of Materials Engineering Korea Institute of Machinery & Materials 66 Sangnam-dongChangwonGyeongsangnam-do 641-010Korea

Aging behavior of Mg-3.6Y-0.5Zr and ***-0.5Zr alloys was investigated by microhardness measurement and transmission electron *** the case of Mg-Y-Zr alloy,the presence ofβ″phase,a major strength- ener,having base centered orthorhombic structure with its lattice constants of a-（β″）=0.64 nm,b-（β″）=2.22 nm, and c-（β″）=0.52 nm was *** the case of Mg-Nd-Zr alloy aged at 250℃,the presence ofβ″andβ′phases was *** crystal structure ofβ″phase was found to be do-（19） and its orientation relationships with Mg matrix were [0001]-（β″）//[0001]-（Mg） and [01（？）0]-（β″）//[01（？）0]-（Mg）.Theβ′phase had face centered cubic structure and its orientation relationships with Mg matrix were [011]-（β′）//[0001]-（Mg） and [（？）1（？）]β′//[（？）110]）-（Mg）. The ***-0.5Zr alloy showed higher hardness compared with Mg-3.6Y-0.5Zr alloy.

关键词： Mg-Y-Zr alloy Mg-Nd-Zr alloy Precipitation sequence

Biomass growth characteristics of 13-year-old Pinus densiflora *** *** a post-fire plantation on different contour conditions in Samcheuk,Korea

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain Science 2016年第7期13卷 1238-1244页

作者： Lee Ju-Hyoung Lee do-hyung kim do-hyun Park Jin-Hwa kimJae-Hee Department of Forest Resources Yeungnam UniversityGyeongsan 712-749Republic of Korea Useful Plant Resources Center Korea National ArboretumYangpgeong-gun 12519Republic of Korea Korea Forest Welfare Institute Therapy-ro 209Bonghyeon-myeonYeongju-siGyeongsangbuk-doRepublic of Korea Department of forest genetic resources National Institute of Forest Science57HoegiroDongdaemun-guSeoul 02455Republic of Korea

We used preliminary data to estimate the growth volume of artificially reforested Pinus densiflora in a post-fire area on three different contour conditions. We compared the growth of P. densiflora on a south-facing slope(Ssth), north-facing slope(Snth) and ridge area(Ridge), using 7 trees selected from each stand aspect. The tree height, diameter and growth volume were measured and the dry weight of each plant part were compared and analyzed. The results revealed that the total dry weight was highest on Ssth(5992.3 g), followed by Snth(4833.2 g) and lowest on Ridge(3160.1 g). The height growth was highest on Snth(285.8 cm), followed by Ssth(274.5 cm) and lowest on Ridge(211.5 cm). The diameter growth was greatest on Ssth(7.37 cm), followed by Snth(7.10 cm) and lowest on Ridge(5.72 cm). The volume growth was highest on Ssth(4257.7 cm3), followed by Snth(3750.7 cm3) and lowest on Ridge(2093.7 cm3). Therefore, we should consider and include the concept of slope orientation together with differences in habitat environments in afforestation projects when creating artificial forests with P. densiflora. These study results can serve as important preliminary data for future establishment of artificial forest of P. densiflora in a post-fire plantation.

关键词： Pinus densiflora Growth characteristics Contour conditions Planted stand Post-fire plantation

Hyperoxia accelerates progression of hepatic fibrosis by up-regulation of transforming growth factor-β expression

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2014年第11期20卷 3011-3017页

作者： Sang Hwa Lee Sung-Im do hyun-Soo kim Department of Pathology Aerospace Medicine Research CenterAerospace Medical CenterRepublic of Korea Air ForceChungcheongbuk-do 363-849South Korea Department of Pathology Kangbuk Samsung HospitalSungkyunkwan University School of MedicineSeoul 110-746South Korea

AIM: To investigate the effect of hypoxia or hyperoxia on the progression of hepatic fibrosis and to examine the role of transforming growth factor-β (TGF-β) in the livers of rats exposed to hypoxic or hyperoxic con... 详细信息

关键词： Hepatic fibrosis, Cirrhosis, Hypoxia, Hyperoxia, Transforming growth factor-β

Structural Resistance of SRC Column-Steel Beam Joint Developed for Innovative Construction of Buildings

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2011年第S1期18卷 924-928页

作者： Seo Soo-yeon Yun hyun-do kim Seung-hun Dept.of Architectural Engineering Chungju National UniversityChungjuKorea Dept.of Architectural Engineering Chungnam National UniversityDaejeonKorea Dept.of Architectural Engineering Hanbat National UniversityDaejeonKorea

This paper presents an experimental study investigating factors influencing the effective width of steel reinforced concrete (SRC) column-steel beam joints of building in order to calculate its resisting *** 1/2 scaled interior SRC column-steel beam joint specimens were made with considering parameters such as beam flange width,beam depth and SRC column *** directional increasing moment was applied to the joint by acting forces to each ends of beam and the structural behavior of joint was *** previous design method suggested by Deierlein was reviewed and a modified equation was proposed from the analysis of test *** result indicated that the equation to calculate the effective width in Deierlein’s design method didn’t consider effectively the influence caused by the variation of beam depth so that a modified equation was suggested and the validation of it was confirmed in this paper.

关键词： SRC column-steel beam joint effective width flange width beam depth