检索结果-南通市图书馆

Terahertz sensing with a 3D meta-absorbing chip based on two-photon polymerization printing

Photonics Research 2024年第5期12卷 895-903页

作者： XUEER chen LONGFANG YE DAQUAN yu School of Electronic Science and Engineering Xiamen UniversityXiamen 361005China Institute of Electromagnetics and Acoustics Xiamen UniversityXiamen 361005China Xiamen Sky Semiconductor Technology Co. Ltd.Xiamen 361026China

The narrowband meta-absorbers exhibit significantly enhanced electromagnetic confinement capabilities, showcasing broad application prospects in sensing fields. They can be applied for biomarker detection, chemical composition analysis, and monitoring of specific gas in the environment. In this work, we propose a 3D meta-absorber with an out-of-plane plasma mechanism based on a two-photon printing system. Compared to the conventional fabrication of a metal-insulator-metal 2D meta-absorber, the 3D absorber is composed of a metal layer and a resin layer from top to bottom;its manufacturing process is simpler, only including two-photon printing and magnetron sputtering deposition. A noticeable absorbing resonance appears at 0.3142 THz with perfect absorbance with a high Q-factor of 104.67. The theoretical sensitivity to the refractive index of the sensor reaches up to172.5 GHz/RIU, with a figure of merit (FOM) of 19.56. In the experiments, it was validated as a meta-absorber with high sensitivity for doxycycline (DCH). As the DCH concentration increases from 0 to 4 mg/mL, the absorption intensity decreases around 49%, while the resonant frequency shift is around 70 GHz. It reflects the real-time residual content of DCH, and is potentially applied in trace antibiotic detection. The results showcase a perfect narrowband absorption capability with strong electromagnetic confinement in the terahertz spectrum, along with high-Q sensing characteristics of DCH. Compared to 2D metamaterials, the diversity of3D metamaterial significantly expands, and introduces additional effects to provide greater flexibility in manipulating electromagnetic waves. The 3D device offers opportunities for the application of terahertz biochemical sensing.

关键词： absorber printing absorbing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design and Gait Planning of a Worm-inspired Metameric Robot for Pipe Crawling

引用

Journal of Bionic Engineering 2024年第3期21卷 1265-1277页

作者： yu Liu Qingbiao Shi Zhen chen Pen-Tung Sah Institute of Micro-Nano Science and Technology Xiamen UniversityXiamen361102China

The earthworm has been attracted much attention in the research and development of biomimetic robots due to their unique locomotion mechanism,compact structure,and small motion *** paper presents a new design and prototype of a worm-inspired metameric robot with a movement pattern similar to that of *** robot consists of multiple telescopic modules connected in series through joint *** telescopic module mimics the contraction and elongation motion modes of the earthworm segments.A kinematic and dynamic analysis is conducted on the telescopic module,and an input torque calculation method is provided to ensure sufficient friction between the robot and the pipe *** gait modes of the prototype robot for straight and turning locomotion are introduced,and these modes are extended to robots constructed by different numbers of telescopic *** addition,a method is proposed to increase the friction between the robot and the pipe wall in the aforementioned gait modes without changing the robot structure,thereby improving the robot’s motion ability in *** theoretical model of gait modes has also been validated through gait *** findings of this paper would provide a useful basis for the design,modeling,and control of future worm inspired robots.

关键词： Bio-inspired robot Spatial linkage mechanism Kinematics model Peristaltic locomotion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of solidification mode on microstructure evolution and properties of magnesium alloy with long-period stacking ordered phase

引用

Journal of Iron and Steel Research(International) 2024年第5期31卷 1127-1138页

作者： Hao Li Hong-mei chen Xu Zhang Qian-hao Zang Jing Zhang di Feng Yan-xin Qiao yu-hang Guo School of Materials Science and Engineering Jiangsu University of Science and TechnologyZhenjiang212100JiangsuChina School of Metallurgy and Materials Engineering Jiangsu University of Science and TechnologySuzhou215600JiangsuChina

The solidification methods of electromagnetic stirring(EMS)and non-electromagnetic stirring were employed to prepare Mg–6Gd–3Y–xZn–0.6Zr(x=1,1.5,2,3)*** evolution of alloy microstructures and the changes in properties were analyzed for different Zn *** has been observed that in alloys without electromagnetic stirring,as the Zn content increases,the alloy structure gradually *** primary second phase transitions from Mg5RE phase to long-period stacking ordered(LPSO)phase,resulting in improved hardness and *** alloys subjected to electromagnetic stirring,there is a relatively higher content of the second phase,primarily consisting of LPSO *** applying electromagnetic stirring,the quantity and the type of LPSO phase in the alloy *** alloy structure becomes more uniform with electromagnetic stirring,resulting in increased hardness and reduced hardness gradients within the *** mechanical properties of alloys with electromagnetic stirring are superior to those without electromagnetic stirring.

关键词： Rare earth magnesium alloy LPSO phase Electromagnetic stirring Casting Property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical Investigation of the Angle of Attack Effect on Cloud Cavitation Flow around a Clark-Y Hydrofoil

引用

Computer Modeling in Engineering & Sciences 2024年第6期139卷 2947-2964页

作者： di Peng Guoqing chen Jiale Yan Shiping Wang College of Engineering Peking UniversityBeijing100871China College of Shipbuilding Engineering Harbin Engineering UniversityHarbin150001China

Cavitation is a prevalent phenomenon within the domain of ship and ocean engineering,predominantly occurring in the tail flow fields of high-speed rotating propellers and on the surfaces of high-speed underwater *** re-entrant jet and compression wave resulting from the collapse of cavity vapour are pivotal factors contributing to cavity ***,these phenomena significantly modulate the evolution of cavitation *** this paper,numerical investigations into cloud cavitation over a Clark-Y hydrofoil were conducted,utilizing the Large Eddy Simulation(LES)turbulence model and the Volume of Fluid(VOF)method within the OpenFOAM *** analysis of results obtained at different angles of attack is undertaken.A discernible augmentation in cavity thickness is observed concomitant with the escalation in attack angle,alongside a progressive intensification in pressure at the leading edge of the hydrofoil,contributing to the suction *** results can serve as a fundamental point of reference for gaining a deeper comprehension of cloud cavitation dynamics.

关键词： Cloud cavitation re-entrant jet compression wave clark-Y hydrofoil

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Vertical two-dimensional WS_(2)flakes grown on flexible CNT film for excellent electrochemical performance

引用

Rare Metals 2024年第1期43卷 164-174页

作者： Qian Gong Jing-yun Zou Ming Ren Si-Qi Zhu yu-Rong Zhou Li-Ming Zhao Jian chen yu-Long Wu Jiang-Tao di Li-Xing Kang Qing-Wen Li School of Nano-Tech and Nano-Bionics University of Science and Technology of ChinaHefei 230026China Key Laboratory of Multifunctional Nanomaterials and Smart Systems Division of Advanced MaterialsSuzhou Institute of Nano-Tech and Nano-BionicsChinese Academy of SciencesSuzhou 215123China Jiangsu Key Laboratory of Micro and Nano Heat Fluid Flow Technology and Energy Application School of Physical Science and TechnologySuzhou University of Science and TechnologySuzhou 215009China

Soft electrochemical actuators that can generate mechanical motions in response to electrical stimuli can be used as artificial muscles in microscale *** electrode materials are the key component of the electrochemical actuator because they limit the ion diffusion and accumulation processes and thus affect the deformation in fast response-time and potential engineering ***-dimensional materials,such as one-dimensional(1D)CNT and two-dimensional(2D)vertically stood WS_(2),are great electrode due to their good electrochemical stability and high surface-to-volume ratios,but show limited performances when being used on their own in the actuators because of low reconstruction or low conductivity.A combination of 1D CNT and 2D WS_(2)could form a heterojunction with both high electrochemical activity and great mechanical ***,by depositing highly disordered graphene nanosheets(HDGNs)on CNT films and then WS_(2)on the formed low-dimensional nanocarbon film,a hybrid WS_(2)/HDGN/CNT film was synthesized through a multistep CVD *** grown WS_(2)nanosheets were achieved by taking advantage of HDGNs which limits CNTs ***,the volume expansion caused by the transition from WO_(3)to WS-2can force the vertical growth of WS_(2).This hybrid film shows excellent electrochemical properties,such as high specific capacitance and high rate *** actuators based on the WS_(2)/HDGN/CNT films show good actuating performance,including stability and reconfigurability.

关键词： CNT Graphene Vertically growth WS_(2) Electrochemical actuators

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A novel strategy of tannery sludge disposal–converting into biochar and reusing for Cr(Ⅵ)removal from tannery wastewater

引用

Journal of Environmental Sciences 2024年第4期138卷 637-649页

作者： Zhiwei Li di yu Xingdong Wang Xuejiao Liu Zhen Xu Yin Wang CAS Key Laboratory of Urban Pollutant Conversion Institute of Urban EnvironmentChinese Academy of SciencesXiamen 361021China University of Chinese Academy of Sciences Beijing 100049China Zhejiang Key Laboratory of Urban Environmental Processes and Pollution Control CAS Haixi Industrial Technology Innovation Center in BeilunNingbo 315830China Key Laboratory of Urban Environment and Health Ningbo Observatio

Tannery sludge with high chromium content has been identified as hazardous solid waste due to its potential toxic *** safety disposal and valorization of the tannery sludge remains a *** this study,the chromium stabilization mechanism was systematically investigated during chromium-rich tannery sludge was converted to biochar and the removal performance of the sludge biochar(SBC)for Cr(Ⅵ)from tannery wastewater was also *** results showed that increase in pyrolysis temperature was conductive to the stabilization of Cr and significant reduction of the proportion of Cr(Ⅵ)in *** was confirmed that the stabilization of chromium mainly was attributed to the embedding of chromium in the C matrix and the transformation of the chromium-containing substances from the amorphous Cr(OH)_(3)to the crystalline state,such as(FeMg)Cr_(2)O_(5).The biochar presented high adsorption capacity of Cr(Ⅵ)at low pH and the maximal theoretical adsorption capacity of SBC produced at 800°C can reach 352 mg Cr(Ⅵ)/g,the process of which can be well expressed by Langmuir adsorption isotherm and pseudo second order *** electrostatic effect and reduction reaction were dominantly responsible for the Cr(Ⅵ)adsorption by ***,this study provided a novel strategy for the harmless disposal and resource utilization for the solid waste containing chromium in leather industry.

关键词： Chromium-rich tannery sludge Pyrolysis Biochar Stabilizationmechanisms Cr(Ⅵ)adsorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Generic Existence of Infinitely Many Non-contractible Closed Geodesics on Compact Space Forms

引用

Acta Mathematica Sinica,English Series 2024年第7期40卷 1674-1684页

作者： Hui Liu yu chen Wang School of Mathematics and Statistics Wuhan UniversityWuhan430072P.R.China School of Mathematics Tianjin Normal UniversityTianjin300384P.R.China

Let M=S^(n)/Γand h be a nontrivial element of finite order p inπ_(1)(Μ),where the integers n,p≥2,Γis a finite abelian group which acts freely and isometrically on the n-sphere and therefore M is diffeomorphic to a compact space *** this paper,we prove that there are infinitely many non-contractible closed geodesics of class[h]on the compact space form with C^(r)-generic Finsler metrics,where 4≤r≤∞.The conclusion also holds for Cr-generic Riemannian metrics for 2≤r≤∞.The proof is based on the resonance identity of non-contractible closed geodesics on compact space forms.

关键词： Compact space forms non-contractible closed geodesics generic Finsler metrics resonance identity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research progress on preparation of cerium-based oxide catalysts with specific morphology and their application for purification of diesel engine exhaust

引用

Journal of Rare Earths 2024年第7期42卷 1187-1216,I0001页

作者： Chunlei Zhang Siyu Gao di yu Shengran Zhou Lanyi Wang Xuehua yu Zhen Zhao Institute of Catalysis for Energy and Environment College of Chemistry and Chemical EngineeringShenyang Normal UniversityShenyang110034China State Key Laboratory of Heavy Oil Processing China University of PetroleumBejing102249China

The elimination of pollutants from diesel exhaust has received widespread research attention as they cause serious air pollution and pose a threat to human *** post-treatment technology is one of the most effective and universal technologies to treat diesel exhaust *** design and development of efficient and low-cost catalysts is the key factor to realize the wide application of catalytic post-treatment ***(Ce)-based oxides with specific morphologies are widely used to eliminate pollutants in diesel vehicle exhaust due to their unique physical and chemical properties,such as high catalytic activity,low cost and *** this review,the preparation methods of Cebased oxide materials with specific morphologies,such as nanoparticles,nanocubes,nanorods,nanofibers,and multi-stage pores,are introduced in detail,and the research progress on using these catalysts for the removal of carbon monoxide,hydrocarbons,soot particles,nitrogen oxides,and other pollutants from diesel exhaust is reviewed in ***,the unresolved issues associated with using Ce-based oxide catalysts with a specific morphology to catalytically remove pollutants from diesel exhaust are highlighted,and future application prospects and development directions are discussed.

关键词： Ce-based oxide catalysts dies elexhaust pollutants Specific morphology Catalytic purification Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advances in large viewing angle and achromatic 3D holography

引用

Light(Science & Applications) 2024年第7期13卷 1224-1225页

作者： Jiaming Huang yu chen Guixin Li Department of Materials Science and Engineering Southern University of Science and TechnologyShenzhen 518055China Institute for Applied Optics and Precision Engineering Southern University of Science and TechnologyShenzhen 518055China

Optical holography is a promising technique to achieve a naked-eye 3D ***,the narrow viewing angle and chromatic aberration are the two key issues that usually limit the holographic display performance.A recent work proposes a novel way to circumvent these constraints by introducing a color liquid crystal grating into a timesequenced holography system.

关键词： angle chromatic holographic

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress on Bionic Textured Cutting Tools:A Review and Prospects

引用

Journal of Bionic Engineering 2024年第1期21卷 19-55页

作者： Hong Wei Guangjun chen Zhuang chen Zhiwei yu Jiashuai Huang Tianjin Key Laboratory of High Speed Cutting and Precision Processing Tianjin 300222China School of Mechanical Engineering Tianjin University of Technology and EducationTianjin 300222China

Cutting tools are known as the“productivity”of the manufacturing industry,which affects the production efficiency and quality of the workpiece,and has become the focus of research and attention in academia and ***,traditional cutting tools often suffer from adhesion or wear during the cutting process,which considerably reduces the cutting efficiency and service life of the tools,and makes it difficult to meet current production *** solve the above problems,scholars have introduced bionics into the tool’s design,applying the microscopic structure of the biological surface to the tool surface to alleviate the tool’s *** paper mainly summarizes the research progress of bionic textured cutting ***,categorize whether the bionic texture design is inspired by a single organism or multiple ***,it is discussed that the non-smooth surface of the biological surface has five characteristics:hydrophilic lubricity,wear resistance,drag reduction and hydrophobicity,anti-adhesion,and arrangement,and the non-smooth structure of these different characteristics are applied to the surface of the tool is designed with bionic ***,the cutting performance of bionic textured cutting tools is *** anti-friction and wear-resisting mechanism of bionic textured cutting tools is ***,some pending problems and perspectives have been proposed to provide new inspirations for the design of bionic textured cutting tools.

关键词： Bionic textured cutting tools Biological microstructure characteristics Cutting performance Anti-friction and wear-resisting mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：