检索结果-南通市图书馆

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

肉苁蓉种子离散元仿真参数标定

农机化研究 2025年第2期47卷 19-26,53页

作者：白志业蒙贺伟彭慧杰戚江涛李亚萍坎杂石河子大学机械电气工程学院新疆石河子832000

为寻求肉苁蓉种子离散元模型的物料特性参数,采用物理和仿真试验相结合的方法,以不同物性参数组合下肉苁蓉种子休止角为响应值,采用Plackett-Burman试验对参数进行筛选,获取显著性参数,即肉苁蓉种间静摩擦因数、肉苁蓉种间动摩擦因数、... 详细信息

为寻求肉苁蓉种子离散元模型的物料特性参数,采用物理和仿真试验相结合的方法,以不同物性参数组合下肉苁蓉种子休止角为响应值,采用Plackett-Burman试验对参数进行筛选,获取显著性参数,即肉苁蓉种间静摩擦因数、肉苁蓉种间动摩擦因数、肉苁蓉种子-钢板静摩擦因数、肉苁蓉种子-钢板恢复系数。通过Box-Behnken试验建立休止角与显著性参数回归模型并优化,获取接触参数最优值,即肉苁蓉种间静摩擦因数为0.65、肉苁蓉种间动摩擦因数为0.07、肉苁蓉种子-钢板恢复因数为0.54、肉苁蓉种子-钢板静摩擦因数为0.43。通过仿真与物理试验对比验证,得到二者相对误差为2.05%,表明标定参数可为肉苁蓉种子播种机械仿真提供数据依据。

关键词：肉苁蓉种子休止角离散元参数标定播种机械

Study and Application of Polarographic Catalytic Wave of Chlordiazepoxide in the Presence of Persulfate

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemistry 2002年第5期20卷 502-508页

作者： Guo, W Lin, H Liu, LM Guo, za Song, JF NW Univ Xian Dept Chem Xian 710069 Peoples R China Yuxi Normal Coll Dept Chem Yunnan 653100 Peoples R China

Polarographic catalytic wave of chlordiazepoxide in the presence of K 2S 2O 8 was studied in aqueous and DMF/H 2O mixed solutions. The results showed that a single reduction wave in alkaline medium was the reduction of the N=C bond in 1,2 position of chlordiazepoxide via an intermediate free radical in two one electron successive additions. When K 2S 2O 8 was present, the free radical of the N=C bond was oxidized to regenerate the original, producing a parallel catalytic wave of chlordiazepoxide. It was determined that the apparent rate constant k f of the oxidation reaction was 3.2×10 3 mol -1 ·L·s -1 . Using the catalytic wave the trace of chlordiazepoxide can be determined by linear potential scan polarography. In NH 3/NH 4Cl (pH 10.2±0.1, 0.12 mol/L)/K 2S 2O 8 (0.016 mol/L) supporting electrolyte, the second order derivative peak current of the catalytic wave was rectilinear to chlordiazepoxide concentration in the range of 3.20×10 -8 -1.60×10 -7 , 1.60×10 -7 -1.44×10 -6 and 1.44 ×10 -6 -1.44×10 -5 mol/L, respectively. The limit of detection was 9.0×10 -9 mol/L.

关键词： chlordiazepoxide persulfate polarographic catalytic wave free radical

An investigation of gamma ray mass attenuation from 80.1 to 834.86 keV for fabric coating pastes used in textile sector

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2020年第6期31卷 52-59页

作者： Alev Erenler Tuncay Bayram Yusuf Demirel Erhan Cengiz Rıza Bayrak Gerze Vocational School Sinop UniversitySinopTurkey Department of Physics Karadeniz Technical University61080 TrabzonTurkey Department of Engineering Fundamental Sciences Alanya Alaaddin Keykubat UniversityAntalyaTurkey Vocational School of Health Services Sinop UniversitySinopTurkey

In the present study,we investigate several textile coating pastes used in the market based on their radiation protection capability for gamma *** gamma ray mass absorption coefficients of some coating pastes doped with antimony,boron and silver elements have been *** has been determined that the gamma ray mass attenuation coefficient decreases rapidly as the energy of the gamma rays *** was determined that the doping of the main printing paste with silver and antimony considerably increased the gamma ray absorption capability of main ***,the doping of the paste with boron reduces the mass absorption of gamma *** particular,the gamma ray mass absorption power of the main paste doped with silver and antimony was determined to be useful in the gamma energy range from 80 to *** indicates that the newly doped textile material may be considered for radiation protection in the case of low-energy gamma rays.

关键词： Gamma ray absorption Radiation protection Printing pastes antimony silver

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第1期96卷 248-261页

作者： Seyedmohammad Tabaie Farhad Rézaï-Aria Bertrand C.D.Flipo Mohammad Jahazi Department of Mechanical Engineering École de Technologie Supérieure(ÉTS)H3C 1K3 MontrealQCCanada Institut Clément Ader(ICA) Universitéde ToulouseCNRSIMT Mines AlbiINSAUPSISAECampus Jarlard81013 AlbiFrance TWI Ltd Granta ParkGreat AbingtonCambridge CB216ALUnited Kingdom

The continuous growth in the manufacture of aerospace components such as blisks has led to an increase in the application of different hybrid materials fabricating methods,and thus the requirements for joining and strengthening of dissimilar *** to this goal,selective laser melted(SLM)Inconel718 was joined with forged AD730^(TM)Nickel-based superalloy through linear friction welding(LFW)in this *** variation,specifically with respect to secondary phases precipitation was *** microhardness and strengthening mechanisms of the weldment were also *** precipitation(volume fraction and size of particles)at different regions of both sides of the weld line was *** to the weld line,the dissolution ofγ’/γ"and Laves phases and grain refinement occurred which reveals the effects of both compression strain and high temperature on recrystallization and high degree of elemental diffusion in the weld zone(WZ).It is shown that the size,volume fraction,and shape of secondary phases increased and changed(from spherical to long-striped for Laves particles)as we went from the WZ toward the base ***,the measured microhardness indicated that the strength of AD730^(TM)alloy depends significantly on the grain size,while strength in SLM Inconel 718 was dominated by shape(or size)and the presence of secondary phases(γ’/γ"and Laves).

关键词： Additive manufacturing Linear friction welding Ni-based superalloy Precipitation Microhardness Strengthening mechanisms

Synthesis and Solution Properties of Comb-like Acrylamide Copolymers

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2012年第6期27卷 1105-1109页

作者：罗霄 BAI Lei za Kejian LI Dongwen HAN Wei PU Xiaolin School of Petroleum Engineering Southwest Petroleum UniversityChengdu 610500China Research Institute of Petroleum Exploration and Development Xinjiang Oilfield CompanyPetroChinaKaramay 834000China Tarim Oilfield Company Korla 841000China

A comb-like acrylamide copolymer （HCJ-1） was synthesized by using aqueous free radical polymerization of acrylamide （AM） as main monomer and ether carboxylate as functional monomer. The copolymers were characterized with FT-IR and SEM. The SEM results show that the molecular structure of copolymer is extended in salt water. It is proved that the copolymer shows good salt *** solution properties of HCJ-1 were studied and compared with those of partially hydrolyzed polyacrylamide （HPAM）. The experimental results show that the obtained HCJ-1, compared with HPAM, exhibits a dramatic enhancement in the salt-resistant properties. The apparent viscosity retention rate of 1.5 g/L HCJ-1 aqueous solution and salt solution after 180 days at 60 ℃ are 70.6% and 64.5%, respectively, exhibiting good thermal stability. In addition, HCJ-1 solution also displays the excellent shearing resistance. In a word, the experimental results show the HCJ-1 is a promising profiling agent for high salinity reservoir.

关键词： comb-like salt resistance thermal stability sheafing resistance

Operation power consumption and verification tests of a trenching device for orchards in Xinjiang based on discrete element

在线全文

学校读者我要写书评

暂无评论

International Journal of Agricultural and Biological Engineering 2021年第1期14卷 133-141页

作者： Chen Ma Jiangtao Qi za Kan Shaojie Chen Hewei Meng College of Mechanical and Electrical Engineering Shihezi UniversityShihezi 832000XinjiangChina College of Mechanical and Electronic Engineering Xinjiang Vocational UniversityUrumqi 830013China Key Laboratory of Northwest Agricultural Machinery of the Ministry of Agriculture Shihezi 832000XinjiangChina Ruiyida Machinery Equipment Co. Ltd.Shihezi Development ZoneShihezi 832000XinjiangChina

According to the agronomic requirements of orchard planting pattern and fertilization in Xinjiang,the soil particle models and a soil-trenching device interaction model were established by using discrete element simulation software in order to find out the law of influence of structure parameters and working parameters on the operation power consumption of a segmented cutting trenching device;moreover,its cutting process was simulated according to the response surface test *** to the results of research on the influence of forward speed,cutter disk speed and cutter disk combination on the operation power consumption of the segmented cutting trenching device,the law of their influence on the operation power consumption in descending order is forward speed,cutter disk combination,cutter disk *** to the response surface test result,the following influential factor parameter combination has been obtained:forward speed 815 m/h,cutter disk speed 112 r/min,cutter disk combination A(cut angle 150°,bent angle 60°and working width 133 mm),cutter disk combination B(cut angle 180°,bent angle 90°and working width 166 mm),and trenching operation power consumption-optimization results were verified through field *** to the verification,the results showed a high accuracy of the simulation,with a relative error mean of 3.18%between the theoretical value and the field test *** study can provide a reference for the energy-saving design of orchard trenching devices.

关键词： trenching device discrete element orchard power consumption simulation analysis parameter optimization

STUDY ON CARBOXYL-CONTAINING STARCH IN HEAVY METAL REMOVAL

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 1995年第7期6卷 605-608页

作者： Hu, za Zhou, XX Zhang, L Guo, YH Wu, HY NW Normal Univ Dept Chem Lanzhou 730070 Peoples R China Lanzhou Teachers Sch Dept Chem Lanzhou 730070 Peoples R China

Water-insoluble carboxyl-containing starch graft polymers were prepared. Residual metal ion concentrations in solutions treated with the insoluble starch graft polymers were measured in different pH. The mechanism of ...

关键词：

在线全文

学校读者我要写书评

暂无评论

膜杂捆料多级破碎机设计与试验

农业工程学报 2024年第2期40卷 187-195页

作者：严义其坎杂王吉亮陈绍杰杨崇科李佳莉张炳成严伟哲冯震李亚萍石河子大学机械电气工程学院石河子832000 新疆农垦科学院机械装备研究所石河子832003 石河子开发区锐益达机械装备有限公司石河子832003 绿洲特色经济作物生产机械化教育部工程研究中心石河子832000

针对棉田机收膜杂捆料中膜-土-秆分布不均、相互裹绕且体积过大,无法直接进行有效破碎的问题,通过分析膜杂捆料的破碎过程,确定了一种先破捆、再破碎的破碎方案,并设计了一种包含均匀喂料装置、直刀破捆装置、Y型甩刀破碎装置的膜杂捆... 详细信息

针对棉田机收膜杂捆料中膜-土-秆分布不均、相互裹绕且体积过大,无法直接进行有效破碎的问题,通过分析膜杂捆料的破碎过程,确定了一种先破捆、再破碎的破碎方案,并设计了一种包含均匀喂料装置、直刀破捆装置、Y型甩刀破碎装置的膜杂捆料多级破碎机。以破碎刀辊转速、喂入速度、定刀数量作为主要影响因素,以残膜破碎合格率作为评价指标,进行三因素三水平试验,确定优化参数指标为试验在破碎刀辊转速1 125 r/min;喂入速度为0.012 m/s;定刀数量1个的因素水平下,此时膜杂捆料破碎合格率达到75.15%,满足后续加工工艺要求。该装置的研究对残膜资源化利用关键技术问题具有重要意义和应用价值。

关键词：农业机械试验残膜资源化利用膜杂捆料破碎机器

Calibration and test of the contact parameters for chopped cotton stems based on discrete element method

在线全文

学校读者我要写书评

暂无评论

International Journal of Agricultural and Biological Engineering 2022年第5期15卷 1-8,F0003页

作者： Rongqing Liang Xuegeng Chen Bingcheng Zhang Xinzhong Wang za Kan Hewei Meng College of Mechanical and Electrical Engineering Shihezi University Shihezi 832000XinjiangChina Engineering Research Center for Production Mechanization of Oasis Special Economic Crop Ministry of EducationShihezi 832000XinjiangChina School of Agriculture Engineering Jiangsu UniversityZhenjiang 212013JiangsuChina

In view of the fact that the existing cotton stem simulation models are simplified and have a large discrepancy from the actual appearance and the contact parameters have not been *** this study,the simulation model and numerical simulation were established using the discrete element software *** a second-order response model between contact parameters and repose angle had been *** test result showed that the static friction coefficient,rolling friction coefficient,and coefficient of restitution between cotton stems were crucial factors affecting the repose *** determination coefficient corrected determination coefficient and p-value of the second-order response model were R^(2)=0.959,R^(2)_(adj)=0.921,and p<0.0001 *** error values of the comparison between the simulation test results and the corresponding physical test values were all less than 10%,which showed that the model was reliable and had high interpretation and predictability,this study can provide a certain theoretical basis and data support for the setting of contact parameters in the data simulation of cotton stem harvesting and processing,mechanically-harvested film residue crushing and film stem separation,etc.

关键词： discrete element method cotton stem repose angle contact parameters calibration