检索结果-南通市图书馆

Assembly of charged aerosols on non-conducting substrates via ion-assisted aerosol lithography （IAAL）

在线全文

学校读者我要写书评

暂无评论

Particuology 2017年第4期15卷 17-23页

作者： Seunghyon Kang Wooik Jung dae seong kim Sei Jin Park Mansoo Choi School of Mechanical and Aerospace Engineering Seoul National University Seou 108826 Republic of Korea Global Frontier Center for Multiscale Energy Systems Seoul National University Seou108826 Republic of Korea

The development of ion-assisted aerosol lithography （IAAL） has enabled fabrication of complex three- dimensional nanoparticle （NP） structures on conducting substrates. In this work, the applicability of the IAAL technique was investigated on non-conducting substrates. The NP structure growth process on a non-conducting substrate was found to self-terminate and the structures subsequently repel incoming charged NPs and scatter them away. Electric field calculations supported the experimental findings and confirmed that the electric field distortions owing to charge build-up within the structures prevented additional NP deposition thereon. To regulate the charge build-up without compromising the number of NPs available for assembly, a corona discharger and an ion trap were implemented. By varying the number of ions available in the assembly process, an optimum level of ion injection was found that allowed for a prolonged （〉120 rain） assembly of NP structures on non-conducting substrates without the unwanted scattering of NPs.

关键词： Nanoparticle assembly Non-conducting substrate Ion-assisted aerosol lithography Ion trap

Evaluation of particle growth systems for sampling and analysis of atmospheric fine particles

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2011年第6期9卷 606-610页

作者： dae seong kim Sang Bum Hong Jung-Taek Kwon Kihong Park Department of Environmental Science and Engineering Gwangju Institute of Science and Technology Korea Polar Research Institute Laboratory of Toxicology College of Veterinary Medicine Seoul National University

Three types of water-based condensational growth systems, which can enable particles to grow in size to facilitate sampling and subsequent chemical analysis, were evaluated. The first one is a mixing type growth system where aerosols are mixed with saturated water vapor, the second one is a thermal diffusive growth system where warm flow enters cold-walled tube, and the third one is a laminar flow type where cold flow enters a warm wet-wall tube. Hygroscopic sodium chloride （NaCl）, ammonium sulfate （（NH4）2SO4） and ammonium nitrate （NH4N03）, and non-hygroscopic polystyrene latex （PSL） particles, in the size range of 50-400 nm, were used to determine their growth factors through the growth systems. Our data showed that the third-type growth system could enable particles to grow most efficiently regardless of their hygroscopic property. Collection efficiency of particles in the size range of 0.05-2.5 μm, in a continuous aerosol sampler after they passed through the third-type growth system was about 100%, suggesting that the third-type growth system would he the most useful among the tested growth systems for sampling and subsequent chemical analysis of fine and ultrafine particles.

关键词： Particle growth chamber Condensational growth Particle sampler Hygroscopic particles

Prominent cycling reversibility and kinetics enabled by CaTiO3 protective layer on Zn metal for aqueous Zn-ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 245-258页

作者： Gaeun Lee Yong Nam Ahn seongjoon So Chanwoo Park Jong-seong Bae Taehyun Park Il Tae kim Jaehyun Hur School of Chemical Biological and Battery Engineering Gachon University Seongnam Busan Center Korea Basic Science Institute

Aqueous Zn-ion batteries （AZIBs） have received considerable attention owing to their various advantages such as safety,low cost,simple battery assembly conditions,and high ionic ***,they still suffer from serious problems,including uncontrollable dendrite growth,corrosion,hydrogen evolution reaction （HER） from water decomposition,electrode passivation,and unexpected *** creation of a uniform artificial nanocrystal layer on the Zn anode surface is a promising strategy for resolving these ***,we propose the use of a perovskite CaTiO3（CTO） protective layer on Zn（CTO@Zn） as a promising approach for improving the performance of *** CTO artificial layer provides an efficient pathway for Zn ion diffusion towards the Zn metal because of the high dielectric constant （εr=180） and ferroelectric characteristics that enable the alignment of dipole moments and redistribute the Zn2+ions in the CTO *** avoiding the direct contact of the Zn anode with the electrolyte solution,the uneven dendrite growth,corrosion,parasitic side reactions,and HER are mitigated,while CTO retains its mechanical and chemical robustness during ***,CTO@Zn demonstrates an improved lifespan in a symmetric cell configuration compared with bare ***@Zn shows steady overpotential （～68 m V） for 1500 h at 1 mA cm-2/0.5 mA h cm-2,excelling bare ***,when paired with the V2O5-C cathode,the CTO@Zn//V2O5-C full battery delivers 148.4 mA h g-1（based on the mass of the cathode） after 300 *** study provides new insights into Zn metal anodes and the development of high-performance AZIBs.

关键词： Artificial layer Dielectric constant Zn metal anode Zinc aqueous battery

Comparative study of tensile and high-cycle fatigue properties of extruded AZ91 and AZ91-0.3Ca-0.2Y alloys

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2021年第34期93卷 41-52页

作者： Ye Jin kim Young Min kim seong-Gu Hong dae Woong kim Chong Soo Lee Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Implementation Research Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Division of Industrial Metrology Korea Research Institute of Standards and ScienceDaejeon 34113Republic of Korea Energy Infra Material Measure Team Korea Research Institute of Standards and ScienceDaejeon 34113Republic of Korea Graduate Institute of Ferrous Technology Pohang University of Science and Technology.Pohang 37673Republic of Korea

Mg-Al-Zn-Ca-Y alloys with excellent ignition and corrosion resistances—termed SEN alloys(where the letters"S,""E,"and"N"stand for stainless,environmentally friendly,and non-flammable,respectively)—have been developed *** this study,the microstructure,tensile properties,and high-cycle fatigue properties of an extruded Mg-9.0Al-0.8Zn-0.1Mn-0.3Ca-0.2Y(SEN9)alloy are investigated and compared with those of a commercial Mg-9.0Al-0.8Zn-0.1Mn(AZ91)alloy extruded under the same *** the extruded SEN9 alloy and the extruded AZ91 alloy have a fully recrystallized structure comprising equiaxed grains,but the former has a smaller average grain size owing to the promoted dynamic recrystallization during *** extruded AZ91 alloy contains coarse Mg_(17)Al_(12) discontinuous precipitate(DP)bands parallel to the extrusion direction,which are formed during its cool down after *** contrast,the extruded SEN9 alloy contains relatively fine undissolved Al_(2)Ca,Al_(8)Mn_(4)Y,and Al_(2)Y second-phase particles,which are formed during the solidification stage of the casting *** tensile strength of the extruded SEN9 alloy,which has finer grains and more abundant particles,is slightly higher than that of the extruded AZ91 ***,the difference in their strengths is relatively small because the stronger solid-solution hardening and precipitation hardening effects in the extruded AZ91alloy offset the stronger grain-boundary hardening and dispersion hardening effects in the extruded SEN9alloy to some *** tensile elongation of the extruded AZ91 alloy is significantly lower than that of the extruded SEN9 alloy because the large cracks formed in the DP bands in the former cause its premature *** the extruded SEN9 alloy has higher tensile properties than the extruded AZ91alloy,the high-cycle fatigue life and fatigue strength of the former are shorter and lower,respectively,than those of the *** DP bands in the extruded

关键词： Mg-Al-Zn-Ca-Y alloy Extrusion Tensile properties High-cycle fatigue Crack source

Recommendation application for video head impulse test based on fuzzy logic control

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2016年第5期23卷 1208-1214页

作者： NGUYEN Thi Anh Dao kim dae Young LEE Sang Min kim Kyu Sung seong Ro Lee KWON Jang Woo Department of Computer and Information Engineering Inha University Department of Otorhinolaryngology Inha University Hospital Department of Electronic Engineering Inha University Department of Information and Electronics Engineering Mokpo National University

Vestibulo-ocular reflex(VOR) is an important biological reflex that controls eye movement to ensure clear vision while the head is in ***,VOR measurement is commonly done with a video head impulse test based on a velocity gain algorithm or a position gain algorithm,in which velocity gain is a VOR calculation on head and eye velocity,whereas position gain is calculated from head and eye *** aim of this work is first to compare the two algorithms' performance and to detect covert catch-up saccade,then to propose a stand-alone recommendation application for the patient's *** the first experiment,for ipsilesional and contralesional sides,the calculated position gain(0.94±0.17) is higher than velocity gain(0.84±0.19).Moreover,gain asymmetry of both lesion and intact sides using velocity gain is mostly higher than that from using position gain(four out of five subjects).Consequently,for subjects who have unilateral vestibular neuritis diagnosed from clinical symptoms and a vestibular function test,vestibular weakness is depicted by velocity gain much better than by position *** catch-up saccade and position gain then are used as inputs for recommendation applications.

关键词： vestibulo-ocular response video head impulse velocity gain position gain desaccade

Comparison of electrochemical properties of atmospheric pressure plasma coatings for Al_2O_3-3TiO_2 and CoNiCrAlY in sea water

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 745-752页

作者： seong-jong kim seong-kweon kim Jae-cheul PARK Division of Marine Engineering Mokpo Maritime University Department of Electronic IT Media Engineering Institue of TechnologySeoul National University of Science and Technology New Growth Technical Support Team Green and Industrial Technology CenterKorean Register of Shipping

To improve the durability of underwater rotating products,the corrosion characteristics in harsh marine environment were evaluated through various electrochemical experiments on the Al2O3-3TiO2 and CoNiCrAlY coating layers by atmospheric pressure plasma spray coating *** evaluating the corrosion resistance of these materials,their applicability to environmentally friendly power generation equipment such as blades of tidal current turbines was *** to the Tafel analysis for micro-areas including the coating layer,the coating/metal interlayer and the base metal,the Al2O3-3TiO2 coating layer and the CoNiCrAlY coating layer show markedly lower corrosion current density than the base *** corrosion current density of the CoNiCrAlY coating layer (9.75316×10-8A/cm2) is about 1.6 times more than that of the Al2O3-3TiO2 coating layer (6.13139×10-8A/cm2).

关键词： Al2O3-3TiO2 coating layer CoNiCrAlY coating layer underwater rotating products marine environment corrosion characteristics atmospheric pressure plasma spray

Changes of the intestinal endocrine cells in the C57BL/6 mouse after implantation of murine lung carcinoma (3LL): An immunohistochemical quantitative study

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2005年第35期11卷 5460-5467页

作者： Sae-Kwang Ku Seung-Kyoo seong dae-Young kim Hyeung-Sik Lee Jong-dae kim Hae-Yun Choi Bu-Il Seo Jae-Hyun Lee Pharmacology and Toxicology Laboratory Central Research Laboratories Dong-Wha Pharmaceutical Industrial Co Ltd Anyang 430-017 Republic of Korea Developmental Biology/Embryology Division of Biological Science Gachon Medical School Kanghwha 417-840 Republic of Korea Department of Herbal Biotechnology daegu Haany University Gyeongsan 712-715 Republic of Korea College of Oriental Medicine daegu Haany University Gyeongsan 712-715 Republic of Korea Laboratory of Histology College of Veterinary Medicine Kyungpook National University Taegu 702-701 Republic of Korea

AIM: To study the distributions and frequencies of intestinal endocrine cells in the C57BL/6 mouse with immunohistochemical method using seven types of specific antisera against chromogranin A (CGA), serotonin,somatostatin, glucagons, gastrin, cholecystokinin (CCK)-8 and human pancreatic polypeptide (hPP) after abdominal subcutaneous implantation of murine lung carcinoma (3LL).METHODS: The experimental animals were divided into two groups, one is non-implanted Sham and the other is 3LL-implanted group. Samples were collected from six regions of intestinal tract at 28th d after implantation of 3LL cells (1×105 cell/mouse).RESULTS: In this study, five types of immunoreactive (IR) cells were identified except for gastrin and hPP. The regional distributions of the intestinal endocrine cells in the 3LL-implanted group were similar to those of the non-implanted Sham. However, significant decreases of IR cells were detected in 3LL-implanted group compared to those of non-implanted Sham. CGA- and serotonin-IR cells significantly decreased in 3LL-implanted groups compared to that of non-implanted Sham. Somatostatin-IR cells in the jejunum and ileum and CCK-8-IR cells in the jejunum of 3LL-implanted groups significantly decreased compared to that of non-implanted Sham. In addition,glucagon-IR cells were restricted to the ileum and colon of non-implanted ***: Implantation of tumor cell mass (3LL)induced severe quantifiable changes of intestinal endocrine cell density and the abnormality in density of intestinal endocrine cells may contribute to the development of gastrointestinal symptoms such as anorexia and indigestion, frequently encountered in patients with cancer.

关键词： Intestinal endocrine cell Immunohistochemistry C57BL/6 mouse 3LL Tumor

CNT/High Mass Loading MnO2/Graphene-Grafted Carbon Cloth Electrodes for High-Energy Asymmetric Supercapacitors

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2019年第4期11卷 549-560页

作者： Lulu Lyu Kwang-dong seong Jong Min kim Wang Zhang Xuanzhen Jin dae Kyom kim Youngmoo Jeon Jeongmin Kang Yuanzhe Piao Graduate School of Convergence Science and Technology Seoul National UniversitySeoul 151-742Republic of Korea School of Chemistry and Chemical Engineering Yangzhou UniversityYangzhou 225002JiangsuPeople’s Republic of China Advanced Institutes of Convergence Technology Suwon 443-270Republic of Korea

Flexible supercapacitor electrodes with high mass loading are crucial for obtaining favorable electrochemical performance but still challenging due to sluggish electron and ion ***,rationally designed CNT/MnO2/graphene-grafted carbon cloth electrodes are prepared by a“graft-deposit-coat”*** to the large surface area and good conductivity,graphene grafted on carbon cloth offers additional surface areas for the uniform deposition of MnO2(9.1 mg cm?2)and facilitates charge ***,the nanostructured MnO2 provides abundant electroactive sites and short ion transport distance,and CNT coated on MnO2 acts as interconnected conductive“highways”to accelerate the electron transport,significantly improving redox reaction *** from high mass loading of electroactive materials,favorable conductivity,and a porous structure,the electrode achieves large areal capacitances without compromising rate *** assembled asymmetric supercapacitor demonstrates a wide working voltage(2.2 V)and high energy density of 10.18 mWh cm?3.

关键词： High mass loading Flexible pseudocapacitor Voltage window Energy density

Network-Aided Intelligent Traffic Steering in 5G Mobile Networks

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2020年第10期65卷 243-261页

作者： dae-Young kim Seokhoon kim School of Computer Software Daegu Catholic UniversityGeyongsan38430Korea Department of Computer Software Engineering Soonchunhyang UniversityAsan31538Korea

Recently,the fifth generation(5G)of mobile networks has been deployed and various ranges of mobile services have been *** 5G mobile network supports improved mobile broadband,ultra-low latency and densely deployed massive *** allows multiple radio access technologies and interworks them for services.5G mobile systems employ traffic steering techniques to efficiently use multiple radio access ***,conventional traffic steering techniques do not consider dynamic network conditions *** this paper,we propose a network aided traffic steering technique in 5G mobile network architecture.5G mobile systems monitor network conditions and learn with network *** a machine learning algorithm such as a feed-forward neural network,it recognizes dynamic network conditions and then performs traffic *** proposed scheme controls traffic for multiple radio access according to the ratio of measured ***,it can be expected to improve traffic steering *** performance of the proposed traffic steering scheme is evaluated using extensive computer simulations.

关键词： Mobile network 5G traffic steering machine learning MEC