检索结果-南通市图书馆

Journal of Wuhan University of Technology(Materials Science) 2024年第4期39卷 895-903页

作者：韩宗盈 dong Hui ding Guoyang ZHANG Jiale SONG Xiufang College of Energy Storage Technology Shandong University of Science and TechnologyQingdao 266590China College of Chemical and Biological Engineering Shandong University of Science and TechnologyQingdao 266590China

The lignite-derived carbon from self-protection pyrolysis was employed to balance the fracturing and cold-welding of magnesium during ball *** size analysis indicates that the introduction of lignite-derived carbon can effectively reduce the particle size of Mg while the introduction of graphite does no ***,the effect of lignite-derived carbon on crystallite size reduction of Mg is also better than graphite.A moderate cold-welding phenomenon was observed after ball-milling Mg with the lignite-derived carbon,suggesting less Mg is wasted on the milling vials and *** dynamic simulations reveal that the balanced fracturing and cold-welding of magnesium during ball milling is mainly attributed to the special structure of the lignite-derived carbon:graphitized short-range ordered stacking function as dry lubricant and irregular shape/sharp edge function as milling *** preliminary findings in current study are expected to offer implications for designing efficient Mg-based hydrogen storage materials.

关键词： magnesium lignite-derived carbon cold-welding ball milling molecular dynamic

Modifying effects and mechanisms of superfine stainless wires on microstructures and mechanical properties of ultra-high performance seawater sea-sand concrete

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2024年第10期67卷 3205-3220页

作者： YU Feng dong SuFen ASHOUR Ashraf ding SiQi HAN BaoGuo School of Infrastructure Engineering Dalian University of Technology Faculty of Engineering & Informatics University of Bradford Department of Civil and Environmental Engineering The Hong Kong Polytechnic University

Ultra-high-performance seawater sea-sand concrete（UHPSSC） presents a prospective solution to address the natural resource shortage in marine infrastructure construction. To eliminate the corrosion risk of steel fibers and broaden the applicability of UHPSSC, this study investigates the mechanical properties and free chloride ion content as well as microstructures of UHPSSC reinforced with superfine stainless wires（SSWs） under natural curing. The results indicate that 1.5% SSWs can remarkably improve the flexural strength and toughness of UHPSSC by 127% and 1724%, respectively, and mitigate the long-term strength degradation of UHPSSC. The strong interfacial bond between SSW and UHPSSC improves the compactness of UHPSSC, thus reducing the growth space for Ca（OH）2crystals and swelling hydration products generated by sulfate and magnesium ions. This can be supported by the observed reduction in the Ca/Si ratio of C–S–H gels, CH crystal orientation index, and ***, through mechanisms such as pull-out, rupture, overlapping network, and internal anchor interface, SSWs effectively prevent microcrack growth and propagation, transforming single long-connected microcracks into multiple-emission microcracks centered on SSW. Additionally, the free chloride ion content of the composites at 28 and 180 d meets the ACI 318-19 standard requirements for concrete exposed to seawater. This compliance is attributed to the chloride immobilization facilitated by Friedel's salt and C–S–H gels within the interfaces around SSWs and sea-sand. Consequently, SSWs-reinforced UHPSSC exhibits considerable potential for applications in sustainable marine infrastructures, demanding long-term mechanical properties and high durability.

关键词： ultra-high performance seawater sea-sand concrete superfine stainless wire mechanical properties chloride ion content microstructure

Recent progress on Sn_(3)O_(4)nanomaterials for photocatalytic applications

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 231-244页

作者： xin Yu Congcong Li Jian Zhang Lili Zhao Jinbo Pang Longhua ding Institute for Advanced Interdisciplinary Research(iAIR) School of Chemistry and Chemical EngineeringUniversity of JinanJinan 250022China School of Sino-German Engineering Shanghai Technical Institute of Electronics and InformationShanghai 201411China Division of Systems and Synthetic Biology Department of Life SciencesChalmers University of Technology41296 GöteborgSweden

Tin(IV)oxide(Sn_(3)O_(4))is layered tin and exhibits mixed valence *** has emerged as a highly promising visible-light pho-tocatalyst,attracting considerable *** comprehensive review is aimed at providing a detailed overview of the latest advance-ments in research,applications,advantages,and challenges associated with Sn_(3)O_(4)photocatalytic *** fundamental con-cepts and principles of Sn_(3)O_(4)are ***_(3)O_(4)possesses a unique crystal structure and optoelectronic properties that allow it to ab-sorb visible light efficiently and generate photoexcited charge carriers that drive photocatalytic ***,strategies for the control and improved performance of Sn_(3)O_(4)photocatalytic nanomaterials are *** control,ion doping,and hetero-structure construction are widely employed in the optimization of the photocatalytic performance of Sn_(3)O_(4)*** effective imple-mentation of these strategies improves the photocatalytic activity and stability of Sn_(3)O_(4)***,the review explores the diverse applications of Sn_(3)O_(4)photocatalytic nanomaterials in various fields,such as photocatalytic degradation,photocatalytic hydro-gen production,photocatalytic reduction of carbon dioxide,solar cells,photocatalytic sterilization,and optoelectronic *** discus-sion focuses on the potential of Sn_(3)O_(4)-based nanomaterials in these applications,highlighting their unique attributes and ***,the review provides an outlook on the future development directions in the field and offers guidance for the exploration and de-velopment of novel and efficient Sn_(3)O_(4)-based *** the identification of emerging research areas and potential avenues for improvement,this review aims to stimulate further advancements in Sn_(3)O_(4)-based photocatalysis and facilitate the translation of this promising technology into practical applications.

关键词： photocatalysis Sn_(3)O_(4)nanomaterials building heterostructures antibacterial therapy water splitting

Plant aquaporins:Their roles beyond water transport

在线全文

学校读者我要写书评

暂无评论

The Crop Journal 2024年第3期12卷 641-655页

作者： Qi Sun xin Liu Yoshichika Kitagawa Giuseppe Calamita Xiaodong ding Key Laboratory of Agricultural Biological Functional Genes Northeast Agricultural UniversityHarbin 150030HeilongjiangChina Graduate School of Bioresource Sciences Akita Prefectural UniversityAkita 010-0195Japan Department of Biosciences Biotechnologies and BiopharmaceuticsUniversity of Bari‘Aldo Moro’I-70125 BariItaly Key Laboratory of Soybean Biology of Chinese Education Ministry Northeast Agricultural UniversityHarbin 150030HeilongjiangChina

Compared to other organisms,plants have evolved a greater number of aquaporins with diverse substrates and functions to adapt to ever-changing environmental and internal stimuli for growth and *** aquaporins were initially identified as channels that allow water molecules to cross biological membranes,progress has been made in identifying various novel permeable *** studies have characterized the versatile physiological and biophysical functions of plant ***,we review the recent reports that highlight aquaporin-facilitated regulation of major physiological processes and stress tolerance throughout plant life cycles as well as the potential prospects and possibilities of applying aquaporins to improve agricultural productivity,food quality,environmental protection,and ecological conservation.

关键词： Plant aquaporin Substrate Physiological function Agriculture and environment

Improving constraint onΩ_(m)from SDSS using marked correlation functions

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第8期67卷 207-224页

作者： Limin Lai Jiacheng ding Xiaolin Luo Yizhao Yang Zihan Wang Keshi Liu Guanfu Liu xin Wang Yi Zheng Zhaoyu Li Le Zhang Xiao-dong Li School of Physics and Astronomy Sun Yat-sen University Zhuhai CampusZhuhai 519082China Department of Astronomy Shanghai Jiao Tong UniversityShanghai 200240China Department of Astronomy Tsinghua UniversityBeijing 100084China CSST Science Center for the Guangdong-Hong Kong-Macao Greater Bay Area SYSUZhuhai 519082China Peng Cheng Laboratory Shenzhen 518000China

Large-scale structure(LSS)surveys will increasingly provide stringent constraints on our cosmological ***,the density-marked correlation function(MCF)has been introduced,offering an easily computable density-correlation *** have demonstrated that MCFs offer additional,independent constraints on cosmological models beyond the standard two-point correlation(2PCF).In this study,we apply MCFs for the first time to SDSS CMASS data,aiming to investigate the statistical information regarding clustering and anisotropy properties in the Universe and assess the performance of various weighting schemes in MCFs,and finally obtain constraints onΩ_(m).Upon analyzing the CMASS data,we observe that,by combining different weights(α=[-0.2,0,0.2,0.6]),the MCFs provide a tight and independent constraint on the cosmological parameterΩ_(m),yieldingΩ_(m)=0.293±0.006 at the 1σlevel,which represents a significant reduction in the statistical error by a factor of 3.4 compared to that from *** constraint is consistent with recent findings from the small-scale clustering of BOSS galaxies(Zhai et ***.J.948,99(2023))within the 1σ***,we also find that our estimate is lower than the Planck measurements by about 2.6σ,indicating the potential presence of new physics beyond the standard cosmological model if all the systematics are fully *** method outlined in this study can be extended to other surveys and datasets,allowing for the constraint of other cosmological ***,it serves as a valuable tool for forthcoming emulator analysis on the Chinese Space Station Telescope(CSST).

关键词： large scale structure of universe dark energy cosmological parameters marked weighted correlation function

Evaluation and Influencing Factors on Particle Agglomeration in RAP

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 60-68页

作者：唐伟李宁 ZHUANG Yuan ZHAN He YU xin WU Wenxiu ding Gongying College of Civil and Transportation Engineering Hohai UniversityNanjing 210098China Jiangsu Expressway Engineering Maintenance Technology Center Nanjing 211106China Jinhua Highway and Transportation Management Center Jinhua 321000China

Asphalt extraction test and scanning electron microscopy(SEM) were used for analysis of agglomerations of reclaimed asphalt pavement(RAP) particles. In order to quantify the agglomeration degree of RAP, the fineness modulus ratio(FMR) and the percentage loss index(PLI) were proposed. In addition, grey correlation analysis was conducted to discuss the relationship between particle agglomerations and RAP size,asphalt content(AC), and surface area. Two indexes indicate that the agglomeration degree increases in general as the RAP size reduces. This can be attributed to that particles are prone to agglomeration in the case of higher AC. Based on the SEM images and the material composition of RAP, the particle agglomeration in RAP can be classified into weak agglomeration and strong agglomeration. Grey correlation analysis shows that AC is the crucial factor affecting the agglomeration degree and RAP variability. In order to produce consistent and stable reclaimed mixtures, disposal measures of RAP are suggested to lower the AC of RAP.

关键词： RAP particle agglomeration grey correlation analysis asphalt content

Coordinated Frequency Control for Isolated Power Systems with High Penetration of DFIG-Based Wind Power

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第4期10卷 1399-1414页

作者： xin ding Wei Lin Jian Xu Yuanzhang Sun Liangzhong Yao Beilin Mao School of Electrical Engineering and Automation Wuhan UniversityWuhan 430072China Department of Electrical Engineering and Computer Science Case Western Reserve UniversityClevelandOH 44106 USA

This paper proposes a coordinated frequency control scheme for emergency frequency regulation of isolated power systems with a high penetration of wind *** proposed frequency control strategy is based on the novel nonlinear regulator theory,which takes advantage of nonlinearity of doubly fed induction generators(DFIGs)and generators to regulate the frequency of the power *** deviations and power imbalances are used to design nonlinear feedback controllers that achieve the reserve power distribution between generators and DFIGs,in various wind speed *** effectiveness and dynamic performance of the proposed nonlinear coordinated frequency control method are validated through simulations in an actual isolated power grid.

关键词： Frequency control isolated power systems nonlinear feedback nonlinear regulator theory wind power

Identification of pathological characteristics in pulmonary tuberculosis using polarization-sensitive optical coherence tomography

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Innovative Optical Health Sciences 2024年第6期17卷 97-106页

作者： Yun ding Zhuoqun Yuan Xiaojiang Zhao Guozheng Gao xin Li Yanmei Liang Clinical School of Thoracic Tianjin Medical University TianjinP.R.China Department of Thoracic Surgery Fujian Provincial Hospital FujianP.R.China Institute of Modern Optics Nankai University Tianjin Key Laboratory of Micro-scale Optical Information Science and Technology Tianjin 300350P.R.China School of Medicine Tianjin University TianjinP.R.China Department of Pathology Tianjin Chest Hospital No.261Taierzhuang South Road Jinnan District Tianjin 300222P.R.China Department of Thoracic Surgery Tianjin Chest Hospital TianjinP.R.China

The low detection rate of Mycobacterium tuberculosis in clinical practice leads to a high rate of missed diagnosis for pulmonary tuberculosis(PTB).As a noninvasive,high-resolution,real-time imaging technology,polarization-sensitive optical coherence tomography(PS-OCT)may be feasible for the rapid identification of pathological *** study aimed to explore the feasibility of using PS-OCT to identify pathological features of *** the experiments,PTB samples containing some surrounding lung tissues were imaged using *** is demonstrated that PS-OCT images showed good consistency with the corresponding pathological images and were able to identify PTB-related characteristic pathological *** think PS-OCT can serve as an effective supplement for the diagnosis of PTB,enabling rapid and accurate diagnosis,and aiding in the understanding of the pathological characteristics and pathophysiological processes of PTB.

关键词： Pulmonary tuberculosis PS-OCT pathological features.

High-precision simulation and experimental verification of residual stress and surface topography of cylindrical surface shot peening

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CHINESE JOURNAL OF AERONAUTICS 2024年第9期37卷 535-559页

作者： Zhao, Jiuyue Tang, Jinyuan Liu, Huaming Zhang, Huiyun Li, xin ding, Han Cent South Univ State Key Lab Precis Mfg Extreme Serv Performance Changsha 410083 Peoples R China Cent South Univ Coll Mech & Elect Engn Changsha 410083 Peoples R China

Shot peening is commonly employed for surface deformation strengthening of cylindrical surface part. Therefore, it is critical to understand the effects of shot peening on residual stress and surface topography. Compared to flat surface, cylindrical surface shot peening has two significant features: (i) the curvature of the cylindrical surface and the scattering of the shot stream cause distributed impact velocities; (ii) the rotation of the part results in a periodic variation of the impact velocity component. Therefore, it is a challenge to quickly and accurately predict the shot peening residual stress and surface topography of cylindrical surface. This paper developed a high-precision model which considers the more realistic shot peening process. Firstly, a kinematic analysis model was developed to simulate the relative movement of numerous shots and cylindrical surface. Then, the spatial distribution and time-varying impact information was calculated. Subsequently, the impact information was used for finite element modeling to predict residual stress and surface topography. The proposed kinematic analysis method was validated by comparison with the discrete element method. Meanwhile, 9310 high strength steel rollers shot peening test verified the effectiveness of the model in predicting the residual stress and surface topography. In addition, the effects of air pressure and attack angle on the residual stress and surface topography were investigated. This work could provide a functional package for efficient prediction of the surface integrity and guide industrial application in cylindrical surface shot peening.

关键词： Shot peening Cylindrical surface 9310 high strength steel High-precision modeling Residual stress Surface topography FATIGUE BEHAVIOR ROUGHNESS INTEGRITY STRENGTH HARDNESS STEEL

Synergistic enhancement on mechanical properties and corrosion resistance of biodegradable Mg-Zn-Y alloy via V-microalloying

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 530-545页

作者： Jiaxin Zhang xin ding Ruirun Chen Wenchao Cao Jinshan Zhang Rui Zhao National Key Laboratory for Precision Hot Processing of Metals Harbin Institute of TechnologyNo.92West Dazhi StreetHarbinHeilongjiang 150001China College of Materials Science and Engineering Taiyuan University of TechnologyNo.79West Yingze StreetTaiyuanShanxi 030024China

For the sake of improving the mechanical properties and corrosion resistance of biodegradable Mg alloy synergistically,various content of element V(0,0.05,0.10,0.15,0.20 wt.%)are introduced into an Mg-Zn-Y alloy with long-period stacking ordered(LPSO)structure,and the effects of V on its microstructure,mechanical properties and corrosion resistance are investigated *** results indicate that the grains are effectively refined by V addition,and the primaryα-Mg in Mg-Zn-Y-V0.1 alloy is most significantly refined,with grain size being decreased by 62%.The amount of 18R LPSO structure is increased owing to the V *** growth mode of the second phase(W-phase and 18R LPSO structure)is transformed to divorced growth pattern,which ascribes to the thermodynamic drive force of V to promote the nucleation of LPSO ***,18R LPSO structure presents a continuous *** to grains refinement and modification of second phase,the tensile strength and strain of alloys are both enhanced ***,the ultimate tensile strength and the elongation of V0.1 alloy are 254 MPa and 15.26%,which are 41%and 61%higher than those of V-free alloy,*** to the continuously distributed 18R LPSO structure with refined grains and stable product film,the weight loss and hydrogen evolution corrosion rates of V0.1 alloy are 7.1 and 6.2 mmy^(-1),respectively,which are 42.6%and 45.4%lower than those of V-free alloy.

关键词： Corrosion Mechanical property V-microalloying LPSO SKPFM