检索结果-南通市图书馆

Oxygen vacancy boosting Fenton reaction in bone scaffold towards fighting bacterial infection

International Journal of Extreme Manufacturing 2024年第1期6卷 296-311页

作者： cijun shuai Xiaoxin Shi Feng Yang Haifeng Tian Pei Feng State Key Laboratory of Precision Manufacturing for Extreme Service Performance College of Mechanical and Electrical EngineeringCentral South UniversityChangsha 410083People’s Republic of China Institute of Additive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013People’s Republic of China College of Mechanical Engineering Xinjiang UniversityUrumqi 830017People’s Republic of China

Bacterial infection is a major issue after artificial bone transplantation due to the absence of antibacterial function of bone scaffold,which seriously causes the transplant failure and even amputation in severe cases.In this study,oxygen vacancy(OV)defects Fe-doped Ti O2(OV-FeTiO2)nanoparticles were synthesized by nano TiO2and Fe3O4via high-energy ball milling,which was then incorporated into polycaprolactone/polyglycolic acid(PCLGA)biodegradable polymer matrix to construct composite bone scaffold with good antibacterial activities by selective laser sintering.The results indicated that OV defects were introduced into the core/shell-structured OV-FeTiO2nanoparticles through multiple welding and breaking during the high-energy ball milling,which facilitated the adsorption of hydrogen peroxide(H2O2)in the bacterial infection microenvironment at the bone transplant site.The accumulated H2O2could amplify the Fenton reaction efficiency to induce more hydroxyl radicals(·OH),thereby resulting in more bacterial deaths through·OH-mediated oxidative damage.This antibacterial strategy had more effective broad-spectrum antibacterial properties against Gram-negative Escherichia coli(E.coli)and Gram-positive Staphylococcus aureus(S.aureus).In addition,the PCLGA/OV-FeTiO2scaffold possessed mechanical properties that match those of human cancellous bone and good biocompatibility including cell attachment,proliferation and osteogenic differentiation.

关键词： bacterial infection bone scaffold selective laser sintering Fenton reaction antibacterial properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ag-doped CNT/HAP nanohybrids in a PLLA bone scaffold show significant antibacterial activity

引用

Bio-Design and Manufacturing 2024年第2期7卷 105-120页

作者： cijun shuai Xiaoxin Shi Kai Wang Yulong Gu Feng Yang Pei Feng State Key Laboratory of Precision Manufacturing for Extreme Service Performance College of Mechanical and Electrical EngineeringCentral South UniversityChangsha 410083China Institute of Additive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013China College of Mechanical Engineering Xinjiang UniversityUrumqi 830017China

Bacterial infection is a major problem following bone implant surgery.Moreover,poly-l-lactic acid/carbon nanotube/hydroxyapatite(PLLA/CNT/HAP)bone scaffolds possess enhanced mechanical properties and show good bioactiv-ityregardingbonedefectregeneration.Inthisstudy,wesynthesizedsilver(Ag)-dopedCNT/HAP(CNT/Ag-HAP)nanohybrids via the partial replacing of calcium ions(Ca2+)in the HAP lattice with silver ions(Ag+)using an ion doping technique under hydrothermal conditions.Speciﬁcally,the doping process was induced using the special lattice structure of HAP and the abundant surface oxygenic functional groups of CNT,and involved the partial replacement of Ca2+in the HAP lattice by doped Ag+as well as the in situ synthesis of Ag-HAP nanoparticles on CNT in a hydrothermal environment.The result-ing CNT/Ag-HAP nanohybrids were then introduced into a PLLA matrix via laser-based powder bed fusion(PBF-LB)to fabricate PLLA/CNT/Ag-HAP scaffolds that showed sustained antibacterial activity.We then found that Ag+,which pos-sesses broad-spectrum antibacterial activity,endowed PLLA/CNT/Ag-HAP scaffolds with this activity,with an antibacterial effectiveness of 92.65%.This antibacterial effect is due to the powerful effect of Ag+against bacterial structure and genetic material,as well as the physical destruction of bacterial structures due to the sharp edge structure of CNT.In addition,the scaffold possessed enhanced mechanical properties,showing tensile and compressive strengths of 8.49 MPa and 19.72 MPa,respectively.Finally,the scaffold also exhibited good bioactivity and cytocompatibility,including the ability to form apatite layers and to promote the adhesion and proliferation of human osteoblast-like cells(MG63 cells).

关键词： Ag-doped Carbon nanotube/hydroxyapatite(CNT/HAP) Antibacterial properties Bone scaffold

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Biomedical rare-earth magnesium alloy:Current status and future prospects

引用

Journal of Magnesium and Alloys 2024年第4期12卷 1260-1282页

作者： Mingli Yang Cheng Chen Dongsheng Wang Yinjin Shao Wenhao Zhou cijun shuai Youwen Yang Xinghai Ning Institute of Additive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013China Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education Institutes Tongling UniversityTongling 244061China Department of Rehabilitation Ganzhou People’s HospitalGanzhou 341099China Shaanxi Key Laboratory of Biomedical Metallic Materials Northwest Institute for Non-Ferrous Metal ResearchXi’an 710016China State Key Laboratory of High Performance Complex Manufacturing Central South UniversityChangsha 410083China School of Mechanical and Electrical Engineering Jiangxi University of Science and TechnologyGanzhou 341000China College of Engineering and Applied Science Nanjing University210089China

Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,with their distinct physical and chemical properties,has greatly contributed to enhancing the mechanical performance,degradation behavior,and biological performance of biomedical Mg alloys.Currently,a series of RE-Mg alloys are being designed and investigated for orthopedic implants and cardiovascular stents,achieving substantial and encouraging research progress.In this work,a comprehensive summary of the state-of-the-art in biomedical RE-Mg alloys is provided.The physiological effects and design standards of RE elements in biomedical Mg alloys are discussed.Particularly,the degradation behavior and mechanical properties,including their underlying action are studied in-depth.Furthermore,the preparation techniques and current application status of RE-Mg alloys are reviewed.Finally,we address the ongoing challenges and propose future prospects to guide the development of high-performance biomedical Mg-RE alloys.

关键词： Magnesium alloy Rare earth elements Biodegradation behavior Mechanical performance Biological properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of heat treatment on microstructure,mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion

引用

International Journal of Extreme Manufacturing 2024年第1期6卷 258-275页

作者： Chenrong Ling Qiang Li Zhe Zhang Youwen Yang Wenhao Zhou Wenlong Chen Zhi Dong Chunrong Pan cijun shuai College of Mechanical and Electrical Engineering Jiangxi University of Science and TechnologyGanzhou 341000People’s Republic of China School of Mechanical and Electronic Engineering Suzhou UniversitySuzhou 234000People’s Republic of China Shaanxi Key Laboratory of Biomedical Metal Materials Northwest Institute for Non-ferrous Metal ResearchXi’an 710016People’s Republic of China Department of Orthopedics First Afffliated Hospital of Gannan Medical CollegeGanzhou 341000People’s Republic of China School of Mechanical and Automotive Engineering South China university of technologyGuangzhou 510641People’s Republic of China State Key Laboratory of High-Performance Complex Manufacturing Central South UniversityChangsha 410083People’s Republic of China Double Medical Technology Inc. Xiamen 361026People’s Republic of China

Magnesium(Mg)alloys are considered to be a new generation of revolutionary medical metals.Laser-beam powder bed fusion(PBF-LB)is suitable for fabricating metal implants withpersonalized and complicated structures.However,the as-built part usually exhibits undesirable microstructure and unsatisfactory performance.In this work,WE43 parts were firstly fabricated by PBF-LB and then subjected to heat treatment.Although a high densification rate of 99.91%was achieved using suitable processes,the as-built parts exhibited anisotropic and layeredmicrostructure with heterogeneously precipitated Nd-rich intermetallic.After heat treatment,fine and nano-scaled Mg24Y5particles were precipitated.Meanwhile,theα-Mg grainsunderwent recrystallization and turned coarsened slightly,which effectively weakened thetexture intensity and reduced the anisotropy.As a consequence,the yield strength and ultimate tensile strength were significantly improved to(250.2±3.5)MPa and(312±3.7)MPa,respectively,while the elongation was still maintained at a high level of 15.2%.Furthermore,the homogenized microstructure reduced the tendency of localized corrosion and favoredthe development of uniform passivation film.Thus,the degradation rate of WE43 parts was decreased by an order of magnitude.Besides,in-vitro cell experiments proved their favorable biocompatibility.

关键词： laser-beam powder bed fusion WE43 alloys heat treatment mechanical performance biodegradation behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Magnetostrictive alloys:Promising materials for biomedical applications

引用

Bioactive Materials 2022年第2期7卷 177-195页

作者： Chengde Gao Zihao Zeng Shuping Peng cijun shuai State Key Laboratory of High Performance Complex Manufacturing College of Mechanical and Electrical EngineeringCentral South UniversityChangsha410083China NHC Key Laboratory of Carcinogenesis The Key Laboratory of Carcinogenesis and Cancer Invasion of the Chinese Ministry of EducationSchool of Basic Medical ScienceCentral South UniversityChangsha410078HunanChina School of Energy and Machinery Engineering Jiangxi University of Science and TechnologyNanchang330013China Institute of Bioadditive Manufacturing Jiangxi University of Science and TechnologyNanchang330013China Shenzhen Institute of Information Technology Shenzhen518172China

Magnetostrictive alloys have attracted increasing attention in biomedical applications because of the ability to generate reversible deformation in the presence of external magnetic fields.This review focuses on the advances in magnetostrictive alloys and their biomedical applications.The theories of magnetostriction are systematically summarized.The different types of magnetostrictive alloys and their preparation methods are also reviewed in detail.The magnetostrictive strains and phase compositions of typical magnetostrictive alloys,including iron based,rare-earth based and ferrite materials,are presented.Besides,a variety of approaches to preparing rods,blocks and films of magnetostriction materials,as well as the corresponding methods and setups for magnetostriction measurement,are summarized and discussed.Moreover,the interactions between magnetostrictive alloys and cells are analyzed and emphasis is placed on the transduction and transformation process of mechanochemical signals induced by magnetostriction.The latest applications of magnetostrictive alloys in remote microactuators,magnetic field sensors,wireless implantable devices and biodegradable implants are also reviewed.Furthermore,future research directions of magnetostrictive alloys are prospected with focus on their potential applications in remote cell actuation and bone repair.

关键词： Magnetostriction alloys Magnetostriction theories Preparation techniques Measurement methods Biomedical applications

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

In-situ deposition of apatite layer to protect Mg-based composite fabricated via laser additive manufacturing

引用

Journal of Magnesium and Alloys 2023年第2期11卷 629-640页

作者： Youwen Yang Changfu Lu Lida Shen Zhenyu Zhao Shuping Peng cijun shuai Institute of Bioadditive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013China Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology Nanjing University of Aeronautics and AstronauticsNanjing 210016China Shenzhen Institute of Information Technology Shenzhen 518172China NHC Key Laboratory of Carcinogenesis School of basic Medical ScienceCentral South UniversityChangshaHunan 410013China School of energy and machinery engineering Jiangxi University of Science and TechnologyNanchang 330013China State Key Laboratory of High Performance Complex Manufacturing Central South UniversityChangsha 410083China

Biodegradable magnesium(Mg) and its alloy show huge potential as temporary bone substitute due to the favorable biocompatibility and mechanical compatibility. However, one issue deserves attention is the too fast degradation. In this work, mesoporous bioglass(MBG)with high pore volume(0.59 cc/g) and huge specific surface area(110.78 m^(2)/g) was synthesized using improved sol-gel method, and introduced into Mg-based composite via laser additive manufacturing. Immersion tests showed that the incorporated MBG served as powerful adsorption sites, which promoted the in-situ deposition of apatite by successively adsorbing Ca2+and HPO42-. Such dense apatite film acted as an efficient protection layer and enhanced the corrosion resistance of Mg matrix, which was proved by the electrochemical impedance spectroscopy measurements. Thereby, Mg based composite showed a significantly decreased degradation rate of 0.31 mm/year. Furthermore,MBG also improved the mechanical properties as well as cell behavior. This work highlighted the advantages of MBG in the fabrication of Mg-based implant with enhanced overall performance for orthopedic application.

关键词： Laser addictive manufacture Mg-based composite Mesoporous bioglass In-situ deposition Degradation behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Laser additive manufacturing of zinc:formation quality,texture,and cell behavior

引用

Bio-Design and Manufacturing 2023年第2期6卷 103-120页

作者： Mingli Yang Liuyimei Yang Shuping Peng Fang Deng Yageng Li Youwen Yang cijun shuai Institute of Additive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013China Ganjiang Innovation Academy Chinese Academy of SciencesGanzhou 341119China The Key Laboratory of Carcinogenesis and Cancer Invasion of the Chinese Ministry of Education Central South UniversityChangsha 410078China NHC Key Laboratory of Carcinogenesis School of Basic Medical ScienceCentral South UniversityChangsha 410013China Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Key Laboratory of Construction Hydraulic Robots of Anhui Higher Education Institutes Tongling UniversityTongling 244061China State Key Laboratory of High Performance Complex Manufacturing Central South UniversityChangsha 410083China

Laser powder bed fusion(LPBF)makes it possible for biodegradable zinc(Zn)to be used to produce customized orthopedic implants.In this research,we investigate the impact of laser power and scanning speed on the development of surface quality,relative densification,and texture during LPBF of Zn implants.Increasing laser power was able to decrease melt viscosity and surface tension,which improved the metallurgical bonding between adjacent tracks.Uneven and twisted tracks also became continuous and straight.Scanning speed could controlmolten-pool temperature to restrain grain natural orientation,achieving various crystal orientations and a weakened texture.Importantly,it further avoided the thermal expansion and contraction caused by excessive energy storage and accumulation in the matrix,thus reducing the generation of high-dislocation density.As a result,by selecting a reasonable laser power and scanning speed,the LPBF parts exhibited a flat surface morphology and a high density over 99.5%.Their average hardness,mechanical strength,and elongation reached 50.2 HV,127.8 MPa,and 7.6%,respectively.Additionally,the parts displayed a moderate degradation rate and excellent osteogenic properties.All these results provide a basis for selecting process parameters to optimize the comprehensive properties of LPBF-processed Zn parts for biodegradable applications.

关键词： Zn implants Additive manufacturing Laser powder bed fusion Formation quality Texture Osteogenic properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure development and biodegradation behavior of additively manufactured Mg-Zn-Gd alloy with LPSO structure

引用

Journal of Materials Science & Technology 2023年第13期144卷 1-14页

作者： Youwen Yang Chenrong Ling Yageng Li Shuping Peng Deqiao Xie Lida Shen Zongjun Tian cijun shuai Institute of Additive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013China Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China The Key Laboratory of Carcinogenesis and Cancer Invasion of the Chinese Ministry of Education Xiangya HospitalCentral South UniversityChangsha 410078China NHC Key Laboratory of Carcinogenesis of Hunan Cancer Hospital and the Affiliated Cancer Hospital of Xiangya School of Medicine Cancer Research InstituteSchool of Basic Medical ScienceCentral South UniversityChangsha 410013China College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China State Key Laboratory of High Performance Complex Manufacturing Central South UniversityChangsha 410083China

Biodegradable magnesium(Mg)alloy has been considered as a new generation of orthopedic implant ma-terial.Nevertheless,local corrosion usually occurs since the severe micro-galvanic behavior amongα-Mg and precipitates,and results in too rapid degradation.In this study,porous Mg-Zn-Gd part was fabricated using laser additive manufacturing combined with solution heat treatment.During heat treatment,the precipitatedβ-(Mg,Zn)_(3) Gd phase dissolved inα-Mg,and reduced the energy threshold of stacking faults on basal planes,which finally triggered the formation of long period stacking ordered(LPSO)phase.The LPSO phases owned minor potential difference withα-Mg,thus causing less micro-galvanic corrosion ten-dency as compared toβ-(Mg,Zn)_(3) Gd phase.More importantly,they were uniformly distributed within theα-Mg grains and showed different orientations between adjacent grains.As a result,the LPSO-reinforced Mg-Zn-Gd tended to expand laterally during corrosion evolution,and achieved uniform degradation with a considerably reduced degradation rate of 0.34 mm/year.Moreover,in-vitro cell tests further proved its favorable biocompatibility.This work highlighted the additively manufactured Mg-Zn-Gd with LPSO structure showed great potential for orthopedic application.

关键词： Additive manufacturing Mg alloy LPSO structure Biodegradation behavior Biocompatibility

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bone biomaterials and interactions with stem cells

引用

Bone Research 2017年第4期5卷 253-285页

作者： Chengde Gao Shuping Peng Pei Feng cijun shuai State Key Laboratory of High Performance Complex Manufacturing College of Mechanical and Electrical EngineeringCentral South UniversityChangshaChina The Key Laboratory of Carcinogenesis of the Chinese Ministry of Health Xiangya HospitalCentral South UniversityChangshaChina The Key Laboratory of Carcinogenesis and Cancer Invasion of the Chinese Ministry of Education Cancer Research InstituteCentral South UniversityChangshaChina Jiangxi University of Science and Technology GanzhouChina Key Laboratory of Organ Injury Aging and Regenerative Medicine of Hunan ProvinceXiangya HospitalCentral South UniversityChangshaChina

Bone biomaterials play a vital role in bone repair by providing the necessary substrate for cell adhesion, proliferation, and differentiation and by modulating cell activity and function. In past decades, extensive efforts have been devoted to developing bone biomaterials with a focus on the following issues：（1） developing ideal biomaterials with a combination of suitable biological and mechanical properties; （2） constructing a cell microenvironment with pores ranging in size from nanoscale to submicro- and microscale; and （3） inducing the oriented differentiation of stem cells for artificial-to-biological transformation. Here we present a comprehensive review of the state of the art of bone biomaterials and their interactions with stem cells. Typical bone biomaterials that have been developed, including bioactive ceramics, biodegradable polymers, and biodegradable metals, are reviewed, with an emphasis on their characteristics and applications. The necessary porous structure of bone biomaterials for the cell microenvironment is discussed, along with the corresponding fabrication methods. Additionally, the promising seed stem cells for bone repair are summarized, and their interaction mechanisms with bone biomaterials are discussed in detail. Special attention has been paid to the signaling pathways involved in the focal adhesion and osteogenic differentiation of stem cells on bone biomaterials. Finally, achievements regarding bone biomaterials are summarized, and future research directions are proposed.

关键词： Bone biomaterials and interactions with stem cells

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Additive manufacturing of promising heterostructure for biomedical applications

引用

International Journal of Extreme Manufacturing 2023年第3期5卷 363-405页

作者： cijun shuai Desheng Li Xiong Yao Xia Li Chengde Gao State Key Laboratory of Precision Manufacturing for Extreme Service Performance College of Mechanical and Electrical EngineeringCentral South UniversityChangsha 410083People’s Republic of China Institute of Additive Manufacturing Jiangxi University of Science and TechnologyNanchang 330013People’s Republic of China Research Center for Macromolecules and Biomaterials National Institute for Materials Science(NIMS)1-1NamikiTsukubaIbaraki 305-0044Japan

As a new generation of materials/structures,heterostructure is characterized by heterogeneous zones with dramatically different mechanical,physical or chemical properties.This endows heterostructure with unique interfaces,robust architectures,and synergistic effects,making it a promising option as advanced biomaterials for the highly variable anatomy and complex functionalities of individual patients.However,the main challenges of developing heterostructure lie in the control of crystal/phase evolution and the distribution/fraction of components and structures.In recent years,additive manufacturing techniques have attracted increasing attention in developing heterostructure due to the unique flexibility in tailored structures and synthetic multimaterials.This review focuses on the additive manufacturing of heterostructure for biomedical applications.The structural features and functional mechanisms of heterostructure are summarized.The typical material systems of heterostructure,mainly including metals,polymers,ceramics,and their composites,are presented.And the resulting synergistic effects on multiple properties are also systematically discussed in terms of mechanical,biocompatible,biodegradable,antibacterial,biosensitive and magnetostrictive properties.Next,this work outlines the research progress of additive manufacturing employed in developing heterostructure from the aspects of advantages,processes,properties,and applications.This review also highlights the prospective utilization of heterostructure in biomedical fields,with particular attention to bioscaffolds,vasculatures,biosensors and biodetections.Finally,future research directions and breakthroughs of heterostructure are prospected with focus on their more prospective applications in infection prevention and drug delivery.

关键词： additive manufacturing heterostructure synergistic effects integrated properties biomedical applications

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：