检索结果-南通市图书馆

Microstructure Evolution and nanomechanical Behavior of Micro-Area in Molten Pool of Selective Laser Melting(CoCrni)_(82)Al_(9)Ti_(9)High-Entropy Alloy

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1019-1033页

作者： Hong-Wei Zhang li-Wei Lan Zhe-Yu Yang Chang-chun li Wen-Xian Wang College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan030024China Ministry of Education Key Laboratory of Interface Science and Engineering in Advanced MaterialsTaiyuan University of TechnologyTaiyuan030024China Shanxi-Zhejiang University new Materials and Chemical Research Institute Taiyuan030032China

In this work,the phase evolution mechanism and nanomechanical properties of(CoCrni))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were *** HEA contains multiple primary elements and undergoes high-temperature gradient and rapid cooling during *** leads to significant inhomogeneity of nano-scale microstructure characteristics and instability of *** optimizing process parameters,the microstructure evolution at the optimal parameter volume energy density of 440 j/mm^(3)was studied.A phase transition from BCC to FCC occurred in the melt *** the micro-area of the melt pool results in a temperature rise and the combustion-induced loss of Al ***,the ni element content increases significantly outside the melt *** process enhances the phase stability of FCC and facilitates phase ***,rapid cooling leads to the formation of distinctive ultrafine equiaxial crystals inside the melt pool,accompanied by the generation of intracrystalline needle-like nano-scale *** the melt pool,the accumulation of energy results in the formation of coarse ***,the nano-hardness inside the molten pool is remarkably high at 11.79 GPa,while the outside the molten pool is reduced to 9.58 *** the fracture toughness outside the melt pool also *** with inside the melt pool,the residual stress outside the melt pool changed from compressive to tensile stress and decreased from 603.28 to 322.84 MPa.

关键词： High-entropy alloys Selective laser melting Microstructure evolution nanoindentation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Mn content on microstructure and properties of AlCrCuFeMnx high-entropy alloy

引用

China Foundry 2024年第2期21卷 147-158页

作者： ning Wang Kai Ma Qiu-da li Yu-dong Yuan Yan-chun Zhao li Feng School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050China State Key Laboratory of Advanced Processing and Reuse of nonferrous Metals Lanzhou 730050China CnnC nuclear Power Operation and Management Co. Ltd.Haiyan 314300ZhejiangChina

AlCrCuFeMnx(x=0,0.5,1,1.5,and 2)high-entropy alloys were prepared using the vacuum arc melting *** microstructure and mechanical properties of AlCrCuFeMnxwere analyzed and tested by XRD,SEM,TEM,nanoindentation,and electronic universal *** results indicate that the AlCrCuFeMnxhigh-entropy alloy exhibits a dendritic structure,consisting of dendrites with a BCC structure,interdendrite regions with an FCC structure,and precipitates with an ordered BCC structure that form within the ***(Mn)has a strong affinity for dendritic,interdendritic,and precipitate structures,allowing it to easily enter these *** an increase in Mn content,the size of the precipitated nanoparticles in the dendritic region initially increases and then ***,the area fraction initially decreases and then ***,the alloy’s strength and wear resistance decrease,while its plasticity *** Al Cr Cu Fe Mn1.5alloy boasts excellent mechanical properties,including a hardness of 360 HV and a wear rate of 2.4×10^(-5)mm^(3)·n^(-1)·mm^(-1).It also exhibits impressive yield strength,compressive strength,and deformation rates of 960 MPa,1,700 MPa,and 27.5%,respectively.

关键词： high-entropy alloys microstructure mechanical properties wear resistance strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synthesis of crystalline g-C_(3)n_(4) with rock/molten salts for efficient photocatalysis and piezocatalysis

引用

Green Energy & Environment 2024年第5期9卷 890-898页

作者： Tingting Xu j.ng Hur Ping niu Shulan Wang Sangwook Lee Sang-Eun chun li li Department of Chemistry College of ScienceNortheastern UniversityShenyang110819China State Key Laboratory of Rolling and Automation Northeastern UniversityShenyang110819China School of Metallurgy Northeastern UniversityShenyang110819China School of Materials Science and Engineering Kyungpook National UniversityDaegu41566Republic of Korea School of Industrial Technology Advances Kyungpook National UniversityDaegu41566Republic of Korea

Graphitic carbon nitride(g-C_(3)n_(4))is emerging as a promising visible-light photocatalyst while the low crystallinity with sluggish charge separation/migration dynamics signiﬁcantly restricts its practical ***,synthesizing highly crystalline g-C_(3)n_(4) with sufﬁcient surface activities still remains ***,different from using alkali molten salts which is commonly reported,we propose an approach for synthesis of highly crystalline g-C_(3)n_(4) with FeCl3/KCl rock/molten mixed *** rock salt can serve as the structure-directing template while molten salt provides the required liquid medium for ***,the synthesized photocatalyst showed further enhanced crystallinity and improved surface area along with high p/p*excitation compared with crystalline C_(3)n_(4) prepared from conventional molten-salt *** catalytically advantageous features lead to its superior photocatalytic and piezocatalytic activities with a high reactivity for overall water splitting that is not commonly reported for C_(3)n_(4).This work provides an effective strategy for structural optimization of organic semiconductor based materials and may inspire new ideas for the design of advanced photocatalysts.

关键词： High crystallinity Carbon nitride Photocatalysis Piezocatalysis Overall water splitting

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Highly efficient CO_(2) capture using 2-methylimidazole aqueous solution on laboratory and pilot-scale

引用

Chinese journal of Chemical Engineering 2024年第3期67卷 148-156页

作者： Kun li Han Tang Shuangshuang li Zixuan Huang Bei liu chun Deng Changyu Sun Guangj.n Chen State Key Laboratory of Heavy Oil Processing China University of PetroleumBeijing 102249China Zhejiang Tiandi Environmental Protection Technology Co. Ltd.Hangzhou 310012China

To date,the primary industrial carbon capture approach is still absorption using aqueous solutions of ***,to pursue a substitute for the amine-based approach to improve the CO_(2) capture efficiency and decrease the energy cost further,we report a new carbon capture approach using a 2-methylimidazole(mIm)aqueous *** properties and sorption behaviors of this approach have been experimentally *** results show that the mIm solution has higher CO_(2) absorption capacity under relatively higher equilibrium pressure(>130 kPa)and lower desorption heat than the methyldiethanolamine solution.91.6%sorption capacity of mIm solution can be recovered at 353.15 K and 80 *** selectivity for CO_(2)/n_(2) and CO_(2)/CH_(4) can reach an exceptional 7609 and 4324,***,the pilot-scale tests were also performed,and the results demonstrate that more than 98%of CO_(2) in the feed gas could be removed and cyclic absorption capacity can reach 1 mol·L^(-1).This work indicates that mIm is an excellent alternative to alkanolamines for carbon capture in the industry.

关键词： CO_(2) capture Absorption 2-Methylimidazole Separation Pilot-scale tests

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

引用

journal of Wuhan University of Technology(Materials Science) 2024年第2期39卷 268-281页

作者：董得福 WAnG Wei ZHAn chun li Chenglong ZHOU Qisheng 肖生强 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for *** close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi *** main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.

关键词： conjugated polymer molecular weight microstructure thermoelectric performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synthesis,Characterization of Polyethylene Ionomers and Their Antibacterial Properties

引用

Chinese journal of Polymer Science 2024年第8期42卷 1077-1084页

作者： jia-jia Wu Fei Wang Peng-Qi Wan li Pan chun-Sheng Xiao Zhe Ma Yue-Sheng li Tianj.n Key Lab Composite&Functional Materials School of Materials Science and EngineeringTianjin UniversityTianjin 300350China Key Lab Polymer Ecomaterials Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022China

Owing to its high production volume and wide range of application s,polyethylene has gained a great deal of attention,but its low surface energy and non-polar nature have limited its application in some important *** this study,ethylene/11-iodo-1-undecene copolymers were prepared and used as the intermediates to afford a series of imidazolium-based ionomers bearing methanesulfonate(CH_(3)SO_(3)^(-)),trifluoromethanesulfonate(CF_(3)SO_(3)^(-)),or bis(trifluoromethane)sulfonimide(Tf_(2)n^(-))*** tensile test results showed that the stress-at-break(7.8-25.6 MPa)and the elongation-at-break(445%-847%)of the ionomers could be adjusted by changing the counterion species and the ionic group *** importantly,the ionomers exhibited marvelous antibacterial activities against Staphylococcus aureus(***)and Escherichia coli(***).The ionomers bearing Tf_(2)n^(-)exhibited antibacterial activities>99%against both *** and *** when ionic content reached 9.1%.The imidazolium-based ionomers prepared in this work demonstrated excellent comprehensive properties,especially highefficient and broad-spectrum antibacterial ability,exhibiting the potential fo r the application as the antibacterial materials in packaging,medical,and other fields.

关键词： Polyethylene Ionomer Polymerization catalysis Imidazolium Antibacterial material

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

引用

journal of Magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.Y.Xue X.j.li j.H.Chu M.M.li D.n.Zou L.B.Tong School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

关键词： Mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanism of local solidification time variations with melt rate during vacuum arc remelting process of 8Cr4Mo4V high-strength steel

引用

journal of Iron and Steel Research(International) 2024年第2期31卷 377-388页

作者： Tao Pan Hong-chun Zhu Zhou-hua jiang Hua-bing li Rui Zhang Hao Feng School of Metallurgy Northeastern UniversityShenyang110819LiaoningChina State Key Laboratory of Rolling and Automation Northeastern UniversityShenyang110819LiaoningChina

A 2D axisymmetric numerical model was established to investigate the variations of molten pool with different melt rates during the vacuum arc remelting of 8Cr4Mo4V high-strength steel,and the ingot growth was simulated by dynamic mesh *** results show that as the ingot grows,the molten pool profile changes from shallow and flat to V-shaped,and both the molten pool depth and the mushy width ***,the variation of both the molten pool shape and the mushy width melt rate is clarified by the thermal equilibrium *** melt rate increases,both the molten pool depth and the mushy width *** is caused by the increment in sensible heat stored in the ingot due to the limitation of the cooling capacity of the *** nonlinear increment in sensible heat leads to a nonlinear increase in the mushy *** addition,as melt rate increases,the local solidification time(LST)of ingot decreases obviously at first and then *** melt rate is controlled in a suitable range,LST is the lowest and the secondary dendrite arm spacing of the ingot is the smallest,which can effectively improve the compactness degree of 8Cr4Mo4V high-strength steel.

关键词： 8Cr4Mo4V high-strength steel Vacuum arc remelting process Melt rate Molten pool Local solidification time

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Electronic structure regulation and built-in electric field synergistically strengthen photocatalytic nitrogen fixation performance on Ti-BiOBr/TiO_(2)heterostructure

引用

Rare Metals 2024年第3期43卷 1125-1138页

作者： Ru-Qi li Yu-jie Bian chun-Ming Yang li Guo Tao-Xia Ma Chuan-Tao Wang Feng Fu Dan-j.n Wang College of Chemistry and Chemical Engineering Yan’an UniversityYan’an Key Laboratory of Green Catalysis and Quality Improvement and Utilization of Low Rank CoalYan’an716000China

At present,industrial synthetic ammonia was still obtained through the Hubble-Bosch process,with large energy *** is a research hotspot to realize green synthetic ammonia by using solar *** difficulty of photocatalytic ammonia synthesis was that the photo-excited electrons have not enough energy to active n≡*** this study,Ti was doped into BiOBr by one-step hydrothermal method,which was oxidized into TiO_(2)when the doping amount reaches the maximum,in situ forming Ti_(0.31)B_(0.69)OB/TiO_(2)*** from the synergistic effect of Ti doping and S-scheme heteroj.nction,the synthetic ammonia efficiency of Ti_(0.31)B_(0.69)OB/TiO_(2)-11.96 reached 1.643 mmol·g_(cat)^(-1)at mild conditions and without hole scavenger for up to 7 h,the efficiency of synthetic ammonia is 115 times,10.5 times and 3.3 times of that of BiOBr,Ti_(0.31)B_(0.69)OB and TiO_(2),***,DFT calculation confirms that Ti doping accurately refine the electronic structure of BiOBr,facilitate nitrogen adsorption activation and reduce hydrogenation reaction energy barrier,thus accelerating the reaction kinetics of photocatalytic nitrogen reduction(nRR),Meanwhile,constructing S-scheme heteroj.nction boosts the separation and transfer of photogenerated electron-hole pairs,improving the reduction ability of electrons in the conduction band of TiO_(2)and the oxidation ability of holes in the valence band of Ti_(0.31)B_(0.69)OB.

关键词： S-scheme heterostructure Electronic structure regulation Built-in electric field Synergistical stren4gthening Photocatalytic nitrogen fixation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Achieving strength–ductility synergy in novel paramagnetic Fe-based medium-entropy alloys through deep cryogenic deformation

引用

Rare Metals 2024年第9期43卷 4493-4507页

作者： Hu-Wen Ma Yan-chun Zhao li Feng Tian-Zeng liu Zhi-Qi Yu Bo j.n Wang-chun Duan Peter K.liaw Dong Ma State Key Laboratory of Advanced Processing and Recycling of non-Ferrous Metals Lanzhou University of Technology Wenzhou Pump and Valve Engineering Research Institute Lanzhou University of Technology Iron and Steel Research Institute Jiuquan Iron and Steel Corporation Lanzhou Resources and Environment Voc-Tech University Department of Materials Science and Engineering The University of Tennessee neutron Science Center Songshan Lake Materials Laboratory

Cryogenic pre-deformation treatment has been widely used to effectively improve the comprehensive mechanical properties of steels and novel metals. However,the dislocation evolution and phase transformation induced by different degrees of deep cryogenic deformation are not yet fully elucidated. In this study, the effects of multiple cryogenic pre-treatments on the mechanical properties and deformation mechanisms of a paramagnetic Fe63.3Mn14-Si9.1Cr9.8C3.8medium-entropy alloy（MEA） were investigated, leading to the discovery of a pretreated MEA that exhibits exceptional mechanical properties, including a fracture strength of 3.0 GPa, plastic strain of 26.1% and work-hardening index of 0.57. In addition, X-ray diffraction（XRD） and transmission electron microscopy（TEM）analyses revealed that multiple cryogenic pre-deformation treatments significantly increased the dislocation density of the MEA(from 9 × 1015to 4 × 1016m-2after three pretreatments), along with a transition in the dislocation type from predominantly edge dislocations to mixed dislocations（including screw-and edge-type dislocations）. notably, this pretreated MEA retained its paramagnetic properties（μrn after fracture. Thermodynamic calculations showed that cryogenic pretreatment can significantly reduce the stacking fault energy of the MEA by a factor of approximately four(i.e., from 9.7 to2.6 m j·m-2), thereby activating the synergistic effects of transformation-induced plasticity, twinning-induced plasticity and dislocation strengthening mechanisms. These synergistic effects lead to simultaneous strength and ductility enhancement of the MEA.

关键词： Deep cryogenic transformation Dislocation evolution Iron-based medium-entropy alloys Phase transformation Stacking fault energy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：