检索结果-南通市图书馆

Improving the spaceborne GNSS-R altimetric precision based on the novel multilayer feedforward neural network weighted joint prediction model

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 271-284页

作者： Yiwen Zhang wei Zheng Zongqiang Liu Qian Xuesen Laboratory of Space Technology China Academy of Space TechnologyBeijing 100094China China Academy of Aerospace Science and Innovation Beijing 100176China State Key Laboratory of Space-Ground Integrated Information Technology Beijing Institute of Satellite Information EngineeringBeijing 100194China

Global navigation satellite system-reflection(GNSS-R)sea surface altimetry based on satellite constellation platforms has become a new research direction and inevitable trend,which can meet the altimetric precision at the global scale required for underwater *** present,there are still research gaps for GNSS-R altimetry under this mode,and its altimetric capability cannot be specifically ***,GNSS-R satellite constellations that meet the global altimetry needs to be ***,the matching precision prediction model needs to be established to quantitatively predict the GNSS-R constellation altimetric ***,the GNSS-R constellations altimetric precision under different configuration parameters is calculated,and the mechanism of the influence of orbital altitude,orbital inclination,number of satellites and simulation period on the precision is analyzed,and a new multilayer feedforward neural network weighted joint prediction model is ***,the fit of the prediction model is verified and the performance capability of the model is tested by calculating the R2 value of the model as 0.9972 and the root mean square error(RMSE)as 0.0022,which indicates that the prediction capability of the model is ***,using the novel multilayer feedforward neural network weighted joint prediction model,and considering the research results and realistic costs,it is proposed that when the constellation is set to an orbital altitude of 500 km,orbital inclination of 75and the number of satellites is 6,the altimetry precision can reach 0.0732 m within one year simulation period,which can meet the requirements of underwater navigation precision,and thus can provide a reference basis for subsequent research on spaceborne GNSS-R sea surface altimetry.

关键词： GNSS-R satellite constellations Sea surface altimetric precision Underwater navigation Multilayer feedforward neural network

Blind Signal Reception in Downlink Generalized Spatial Modulation Multiuser MIMO System Based on Minimum Output Energy

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Electronics 2024年第2期33卷 504-515页

作者： wei-Chiang WU College of Mechanical and Electrical Engineering Sanming University

This paper considers downlink multiuser multiple-input-multiple-output system with parallel spatial modulation scheme, in which base station transmitter antennas are separated into K groups corresponding to K user terminals. Generalized spatial modulation is employed, in which a subset(more than single antenna) of transmit antenna array are activated and the activating pattern corresponds to specific spatial symbol. Different from existing precoding-based algorithms, we develop a two-stage detection scheme at each user terminal: In the pre-processing stage, a minimax algorithm is proposed to identify the indices of active antennas, where the key idea is that the minimum output energy of the detector is maximized; A constrained minimum output energy algorithm is proposed in the post-processing stage to mitigate multiuser interference and extract temporal symbols. Compared with existing precoding-based algorithms, the complexity is significantly reduced. Moreover, the proposed algorithm is semi-blind,in which only a small subset of channel state information is required to identify active antennas as well as eliminate multiuser interference. Simulation results demonstrate that the proposed algorithm is near-far resistant and the spectral efficiency is extensively increased compared to the conventional spatial modulation scheme.

关键词： GSM Spectral efficiency Computer network reliability Transmitting antennas Modulation Symbols Downlink

同方期刊数据库

The new challenges for the development of NH_(3)-SCR catalysts under new situation of energy transition in power generation industry

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第6期35卷 95-103页

作者： Feibin wei Yongfang Rao Yu Huang wei Wang Hui Mei Science and Technology on Thermostructural Composite Materials Laboratory School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Key Laboratory of Aerosol Chemistry and Physics State Key Laboratory of Loess and Quaternary Geology(SKLLQG)Institute of Earth EnvironmentChinese Academy of SciencesXi’an 710061China Center of Excellence in Quaternary Science and Global Change Chinese Academy of SciencesXi’an 710061China University of Chinese Academy of Sciences Beijing 100049China Department of Environmental Science and Engineering Xi’an Jiaotong UniversityXi’an 710049China

NH_(3)-SCR was one of the most promising de NO_x technologies and it has been widely applied in industrial NO_x ***,with the further development of energy transformation in power generation sector,the development of NH_(3)-SCR catalysts is facing some new *** is becoming an urgent problem to solve low catalytic activity and stability of NH_(3)-SCR catalysts at the working condition of ultra-low temperature(≤200℃)and high concentrations of H_(2)O+SO_(2) due to the gradual deployment of new energy power ***,the traditional coal-fired power plants would need flexible operation with the increasing share of renewable energy *** NH_(3)-SCR catalysts which were applied in coal-fired power industry would be requested to work in a wide temperature window from 200℃ to 500℃ in the near ***,in this review,we summarized the progress of NH_(3)-SCR catalysts in solving these different industrial problems in recent *** the research directions which were deserved to be focused on the development of NH_(3)-SCR catalysts for the energy transition of power generation sector are proposed.

关键词： NH_(3)-SCR NOx reduction Power generation Ultra-low temperature Wide temperature windows

Enhanced thermoelectric and mechanical properties of Bi_(0.5)Sb_(1.5)Te_(3) alloy with dispersed yttrium oxide ceramic nanoparticles

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1758-1768页

作者： Cun-Cheng Li Ming-wei Zhang Ji-Wu Xin Lei wei Wen-Yu Zhao School of Materials Science and Engineering Shandong University of TechnologyZibo255000China School of Electrical and Electronic Engineering Nanyang Technological UniversitySingapore639798Singapore State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

Reducing thermal conductivity while avoiding adverse interfacial reactions during sintering is crucial for improving the thermoelectric performance of Bi_(2)Te_(3)based *** ceramic nanoparticles are good candidates for achieving this *** this study,we designed and prepared a series of p-type Bi_(0.5)Sb_(1.5)Te_(3)nanocomposites decorated with Y_(2)O_(3)ceramic nanoparticles via ball-milling dispersion and spark-plasma *** to the chemical stability of the ceramics,no traces of atomic doping or interfacial reactions were *** measurements revealed that the Y_(2)O_(3)nanoparticles distributed along the grain boundaries acted as energy-dependent carrier-filtering centers to improve the scattering parameter and Seebeck coefficient,contributing to the elevated power factor even with a decreased electrical ***,the incorporated Y_(2)O_(3)nanoparticles and various defect structures they induced effectively strengthened the phonon scattering and suppressed the lattice thermal ***,a peak figure of merit(ZT)of 1.23 at 313 K was achieved for 0.4%Y_(2)O_(3)/Bi_(0.5)Sb_(1.5)Te_(3),which is 13%higher than that of the *** addition,the Vickers hardness of the composite material was 35%higher than that of the *** study demonstrates the effectiveness of ceramic nanoparticles in synergistic ally improving the thermoelectric and mechanical properties,which may be further extended to other thermoelectric systems.

关键词： Bi_(0.5)Sb_(1.5)Te_3 alloy Y_(2)O_(3) ceramic nanoparticles Microstructures Thermoelectric performance Mechanical properties

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第2期21卷 185-196页

作者： wei-li Wu Chang-gui Cheng Yang Li Shi-fa wei De-li Chen The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081China Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081China Technology Center Fushun Special Steel Co.Ltd.Fushun 113001LiaoningChina

In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab *** order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT *** show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either *** the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes *** increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction.

关键词： continuous casting secondary cooling zone internal mixing air-mist nozzle droplet characteristics liquid phase distribution water flow rate

Comparison of antimony and arsenic behaviour at the river-lake junction in the middle of the Yangtze River Basin

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第2期136卷 189-200页

作者： Huiji Liu wei Zeng Ziyang Lai Mengchang He Chunye Lin wei Ouyang Xitao Liu State Key Laboratory of Water Environment Simulation School of EnvironmentBeijing Normal UniversityBeijing 100875China Advanced Interdisciplinary Institute of Environment and Ecology Beijing Normal UniversityZhuhai 519087China

As typical metalloid toxic elements widely distributed in environmental media,the geochemical behaviour of antimony(Sb)and arsenic(As)affects environmental *** selected the surface waters and sediments at the river-lake junction of Dongting Lake as the research objects,analysed the concentration and chemical partitioning of Sb and As,assessed its contamination and ecological risk levels,and discussed its sources and potential influencing *** concentrations of dissolved Sb and As in surface waters were low(<5.46μg/L),and the concentrations of Sb and As in surface sediments were 2.49-22.65mg/kg and 11.10-136.34 mg/kg,*** and As in sediments were mainly enriched in the fraction of residues,but the proportion of As in bioavailability was significantly higher than that of *** the contamination level of Sb was higher than that of As,the risk assessment code(RAC)showed that the ecological risk level of As was higher than that of *** erosion and mining activities(in the midstream of Zijiang River)were the main contaminated sources of Sb,while As was affect mainly by rainwater *** contamination and ecological risk of Sb in the inlet of the Zijiang River should receive considerable attention,while those of As in the inlet of the Xiangjiang River should also be seriously *** study highlights the need for multi-index-based assessments of contamination and ecological risk and the importance of further studies on the environmental behaviour of metalloids in specific hydrological conditions,such as river-lake junctions.

关键词： Contamination Ecological risks Antimony(Sb) Arsenic(As) River-lake junction Dongting Lake

Aerosol-radiation interaction and its variation in North China within 2015–2019 period under continuous PM_(2.5)improvements

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第2期136卷 81-94页

作者： Zhe Lv Xiaoqi Wang wei wei Huahua Bai Xiaoyu Liu Guohao Li Shuiyuan Cheng Department of Environmental Science and Engineering Beijing University of TechnologyBeijing 100124China Key Laboratory of Beijing on Regional Air Pollution Control Beijing 100124China Beijing Municipal Research Institute of Eco-Environmental Protection Beijing 100037China Beijing Key Laboratory of Urban Atmospheric Volatile Organic Compounds Pollution Control and Application Beijing 100037China

A study was conducted on aerosol-radiation interactions over six cities in this region within the 2015–2019 ***-Chem simulations on 2017 showed that based on the six-city average,the aerosol load(PM_(2.5)concentrations)of 121.9,49.6,43.3,and 66.3μg/m^(3)in January,April,July,and October,mainly lowered the level of downward shortwave radiation by 38.9,24.0,59.1,and 24.4 W/m~2and reduced the boundary layer height by 79.9,40.8,87.4,and 31.0 m,via scattering and absorbing solar *** sensitivity of meteorological changes to identical aerosol loads varied in the order July>January>October and ***,the cooling and stabilizing effects of aerosols further led to increases in PM_(2.5),by23.0,3.4,4.6,and 7.3μg/m^(3)respectively in the four *** sensitivity of the effect of aerosols on PM_(2.5)was greatest in January rather than in July,contrary to the effect on ***,a negative linear relation was observed between daily BLH reductions and aerosol loads in fall and winter,and between PM_(2.5)increases and aerosol loads in all *** the PM_(2.5)pollution improvements in this region,the aerosol radiative forcing was effectively *** should result in daily BLH increases of 10–24 m in fall and winter,and the estimates in Beijing agreed well with the corresponding results based on AMDAR ***,the reduction in aerosol radiation effects brought about daily PM_(2.5)decreases of 1.6-2.8μg/m^(3),accounting for 7.0%–17.7%in PM_(2.5)improvements.

关键词： Radiative forcing Aerosol PM_(2.5) Boundary layer height(BLH) North China

A Low Cost, Green Sustainable and Biodegradable Biomass-based Fluorine-free Water and Oil Repellent

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第4期42卷 480-491页

作者： Zhi-wei Shen Shu-Feng Hu Chen Zeng wei-Qing Kong Mei-Fang Zhu State Key Laboratory for Modification of Chemical Fibers&Polymer Materials College of Materials Science and EngineeringDonghua UniversityShanghai201620China State Key Laboratory of Pulp and Paper Engineering School of Light Industry and EngineeringSouth China University of TechnologyGuangzhou510630China

With the global ban on plastics intensifying, the substitution of plastic with paper has garnered increasing attention. However, the inadequate water and oil repellency of pulp molding hinders its practical applications. Currently, the common method to enhance the oil and water repellency of pulp molding is by adding fluorinated water and oil repellents. Nevertheless, fluorinated compounds are environmentally and physiologically harmful. Therefore, the development of fluorine-free, water and oil repellent alternatives is crucial. In this study, chitosan and stearic acid were utilized as the first and second layers of the oil and water repellent coatings, respectively. The coated samples exhibited favorable water repellency, with a water contact angle of 116.4°, and excellent oil repellency, achieving a 12/12 rating on the kit scale. Importantly, the samples did not exhibit any leakage after being soaked in hot water and hot oil at 95±5℃ for 30 min, demonstrating remarkable performance as a barrier against hot water and oil. Moreover, the coated samples displayed outstanding mechanical properties, thermal stability, biodegradability, and recyclability. The approach presented in this study is simple, cost-effective, environmentally friendly, and represents a promising technique for producing fluoride-free, oil-and water-resistant pulp molding products.

关键词： Biomass Fluoride-free Oil-andwater-resistant Plasticfree

Critical Role of Ethylene-Propylene Block Copolymer in Impact Polypropylene Copolymer

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第3期42卷 344-351,I0007页

作者： Yu-Hui Tang Na Zhang wei Bao wei Jiang Yuan Lin Zhao-Hui Su State Key Laboratory of Polymer Physics and Chemistry Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022China School of Applied Chemistry and Engineering University of Science and Technology of ChinaHefei 230026China

Ethylene-propylene block copolymer(EbP) is a vital component in impact polypropylene copolymer(IPC), yet its distribution in the multiphase composite material and how it influences the phase structure and the mechanical properties are not well understood. In this work,four IPCs were investigated by atomic force microscopy-infrared(AFM-IR) to assess the phase compositions in situ, based on which in conjunction with the chain microstructure information obtained ex situ the distributions of the copolymer components were derived for each alloy. For the IPCs whose EbP comprises long P and long E segments, the EbP fraction was found to phase separate from the rubber and the PP matrix to form the cores of the disperse particles with the E-P segmented copolymer(EsP). In contrast, in the IPC with EbP composed of long P and short E segments, the EbP fraction formed an outer shell for the rubber particles with the cores comprising the EsP alone, and this IPC, containing a lower E comonomer content than its counterpart, exhibited both better impact resistance and higher flexural modulus. These results clarify how the chain structure of EbP governs the phase morphology in IPC, which in turn impacts the properties of the composite material.

关键词： Impact polypropylene copolymers AFM-IR Ethylene-propylene block copolymers Core-shell rubber particles