检索结果-南通市图书馆

Validity of fatty liver prediction scores for diagnosis of fatty liver by Fibroscan

在线全文

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第4期23卷 353-360页

作者： Seogsong jeong Sun Jae Park Seong Kyun Na Sang Min Park Byung-cheol Song Yun Hwan Oh Department of Biomedical Sciences Seoul National University Graduate SchoolSeoul 03080Korea Department of Biomedical Informatics CHA University School of MedicineCHA UniversitySeongnam 13488Korea Department of Internal Medicine Inje University College of MedicineSeoul 50834Korea Department of Family Medicine Seoul National University HospitalSeoul National University College of MedicineSeoul 03080Korea Department of Internal Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Jeju National University HospitalJeju National University College of MedicineJeju 63241Korea Department of Family Medicine Chung-Ang University Gwangmyeong HospitalChung-Ang University College of MedicineGwangmyeong 14353Korea

Background:The Korea National Health and Nutrition Examination Survey nonalcoholic fatty liver disease(K-NAFLD)score was recently developed with the intent to operationally define nonalcoholic fatty liver disease(NAFLD).However,there remained an external validation that confirmed its diagnostic performance,especially in patients with alcohol consumption or hepatitis virus infection.Methods:Diagnostic accuracy of the K-NAFLD score was evaluated in a hospital-based cohort consisting of 1388 participants who received Fibroscan®.Multivariate-adjusted logistic regression models and the contrast estimation of receiver operating characteristic curves were used for validation of the K-NAFLD score,fatty liver index(FLI),and hepatic steatosis index(HSI).Results:K-NAFLD-moderate[adjusted odds ratio(aOR)=2.53,95%confidence interval(CI):1.13-5.65]and K-NAFLD-high(aOR=4.14,95%CI:1.69-10.13)groups showed higher risks of fatty liver compared to the K-NAFLD-low group after adjustments for demographic and clinical characteristics,and FLI-moderate and FLI-high groups revealed aORs of 2.05(95%CI:1.22-3.43)and 1.51(95%CI:0.78-2.90),respectively.In addition,the HSI was less predictive for Fibroscan®-defined fatty liver.Both K-NAFLD and FLI also demonstrated high accuracy in the prediction of fatty liver in patients with alcohol consumption and chronic hepatitis virus infection,and the adjusted area under curve values were comparable between K-NAFLD and FLI.Conclusions:Externally validation of the K-NAFLD and FLI showed that these scores may be a useful,noninvasive,and non-imaging modality for the identification of fatty liver.In addition,these scores also predicted fatty liver in patients with alcohol consumption and chronic hepatitis virus infection.

关键词： Nonalcoholic fatty liver disease Fatty liver index Hepatic steatosis index

Adiponectin restores the obesity-induced impaired immunomodulatory function of mesenchymal stromal cells via glycolytic reprogramming

在线全文

学校读者我要写书评

暂无评论

Acta Pharmaceutica Sinica B 2024年第1期14卷 273-291页

作者： Duc-Vinh Pham Thi-Kem Nguyen Bao-Loc Nguyen Jong-Oh Kim Jee-heon jeong Inho Choi Pil-Hoon Park Department of Pharmacology Hanoi University of PharmacyHanoi 100000Viet Nam College of Pharmacy Yeungnam UniversityGyeongsan 38541Republic of Korea Department of Medical Biotechnology Yeungnam UniversityGyeongsan 38541Republic of Korea Research Institute of Cell Culture Yeungnam UniversityGyeongsan 38541Republic of Korea Department of Precision Medicine School of MedicineSungkyunkwan UniversitySuwon 16419Republic of Korea

Obesity has been known to negatively modulate the life-span and immunosuppressive potential of mesenchymal stromal cells(MSC).However,it remains unclear what drives the compromised potency of obese MSC.In this study,we examined the involvement of adiponectin,an adipose tissuederived hormone,in obesity-induced impaired therapeutic function of MSC.Diet-induced obesity leads to a decrease in serum adiponectin,accompanied by impairment of survival and immunomodulatory effects of adipose-derived MSC(ADSC).Interestingly,priming with globular adiponectin(gAcrp)improved the immunomodulatory potential of obese ADSC.Similar effects were also observed in lean ADSC.In addition,gAcrp potentiated the therapeutic effectiveness of ADSC in a mouse model of DSS-induced colitis.Mechanistically,while obesity inhibited the glycolytic capacity of MSC,gAcrp treatment induced a metabolic shift toward glycolysis through activation of adiponectin receptor type 1/p38 MAPK/hypoxia inducible factor-1a axis.These findings suggest that activation of adiponectin signaling is a promising strategy for enhancing the therapeutic efficacy of MSC against immune-mediated disorders.

关键词： Adiponectin Adipose-derived stromal cells Colitis Glycolytic induction HIF1a Immunomodulation Mesenchymal stromal cells Obesity

Enhancing Hydrophilicity of Thick Electrodes for High Energy Density Aqueous Batteries

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2023年第7期15卷 110-121页

作者： Jungeun Lee Hyeonsoo Lee cheol Bak Youngsun Hong Daeha Joung jeong Beom Ko Yong Min Lee Chanhoon Kim Sustainable Technology and Wellness R&D Group Korea Institute of Industrial Technology(KITECH)102 Jejudaehak-RoJeju-SiJeju-do 63243Republic of Korea Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of Physics Virginia Commonwealth UniversityRichmondVA 23284USA

Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.

关键词： Thick electrodes Hydrophilic binder Sulfonation Aqueous zinc-ion batteries High areal capacity

Novel extended C-m models of flow stress for accurate mechanical and metallurgical calculations and comparison with traditional flow models

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第9期10卷 2516-2533页

作者： Man Soo Joun Mohd Kaswandee Razali Jae Dong Yoo Min cheol Kim jeong Muk Choi ReCAFT Gyeongsang National UniversityGraduate School of Mechanical and Aerospace EngineeringJinju 52828South Korea Gyeongsang National University Graduate School of Mechanical and Aerospace EngineeringJinju 52828South Korea MFRC Research CenterJinju 52818South Korea Jinhap Daejeon 34302South Korea

Here,we developed novel extended piecewise bilinear power law(C-m)models to describe flow stresses under broad ranges of strain,strain rate,and temperature for mechanical and metallurgical calculations during metal forming at elevated temperatures.The traditional C-m model is improved upon by formulating the material parameters C and m,defined at sample strains and temperatures as functions of the strain rate.The coefficients are described as a linear combination of the basis functions defined in piecewise patches of the sample strain and temperature domain.A comparison with traditional closed-form function flow models revealed that our approach using the extended piecewise bilinear C-m model is superior in terms of accuracy,ease of use,and adaptability;additionally,the extended C-m model was applicable to numerical analysis of mechanical,metallurgical,and microstructural problems.Moreover,metallurgy-related values can be calculated directly from the flow stress information.Although the proposed model was developed for materials at elevated temperatures,it can be applied over a broad temperature range.

关键词： Flow stress Power law model Piecewise bilinear function Numerical analysis Microstructural prediction Peak strain

Electrochemical behavior of dental implant system before and after clinical use

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2009年第4期19卷 846-851页

作者： Chae-heon CHUNG Hee-Jung KIM Yong-Tae jeong Mee-Kyoung SON Yong-Hoon jeong Han-cheol CHOE Department of Prosthodontics College of DentistryChosun University Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials College of DentistryChosun University

Electrochemical behavior of dental implant system before and after clinical use(in vivo and in vitro) was researched by using abutment and titanium fixture.To simulate an oral environment,the samples of clinically used and non-used implant systems as a working electrode were exposed to artificial saliva at(36.5±1) ℃.Electrochemical tests were carried out using a potentiostat.After electrochemical test,the corrosion morphology of each sample was investigated by FE-SEM and EDS.The corrosion potential and pitting potential of clinically used implant system are lower than those of non-used implant system,and clinically used implant system exhibits a lower range of passivation,indicating a less degree of inherent resistance against chloride ion.The polarization resistance decreases in the case of clinically used implant system,whereas,Rp for clinically non-used implant system increases compared with clinically used implant system.

关键词：电化学行为种植制度临床应用使用制度临床使用电化学测试夹具系统腐蚀形态

Improvement in tensile strength of extruded Mg-5Bi alloy through addition of Sn and its underlying strengthening mechanisms

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第11期10卷 3100-3112页

作者： Sang-cheol Jin Jae Won Cha jeong Hun Lee Taekyung Lee Sang-Ho Han Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Ulsan Regional Division Korea Institute of Industrial TechnologyUlsan 44413Republic of Korea School of Mechanical Engineering Pusan National UniversityBusan 46241Republic of Korea Department of Materials Analysis Korea Institute of Materials ScienceChangwon 51508Republic of Korea

Through an investigation of the microstructure and mechanical properties of extruded Mg–5Bi–x Sn(BT5x, x = 0, 2, 4, and 6 wt%) alloys,this study demonstrates that the addition of Sn to an Mg–5Bi binary alloy significantly improves the tensile strength of the extruded alloy.All the extruded alloys exhibit a typical basal fiber texture and a partially dynamically recrystallized(DRXed) microstructure consisting of fine DRXed grains and coarse un DRXed grains. As the Sn content increases from 0 wt% to 6 wt%, the average size of the DRXed grains decreases from 4.2 to 2.8 μm owing to the increase in the amount of precipitates via their grain-boundary pinning effect. The extruded B5 and BT52 alloys contain numerous Mg_(3)Bi_(2) precipitates, but their size and number density are smaller and higher, respectively, in the latter alloy.Numerous Mg_(2)Sn precipitates as well as Mg_(3)Bi_(2)precipitates are present in the extruded BT54 and BT56 alloys, and the number density of the Mg_(2)Sn precipitates is higher in the latter alloy because of its higher Sn content. The addition of 2 wt% Sn to the B5 alloy significantly improves the yield strength(YS) and ultimate tensile strength(UTS) of the extruded alloy—by 76 and 57 MPa, respectively. This drastic improvement is the combined outcome of enhanced grain-boundary hardening, precipitation hardening, and solid-solution hardening effects induced by the refined DRXed grains, numerous precipitates, and Sn solute atoms, respectively. The further addition of 2 wt% or 4 wt% Sn to the BT52 alloy leads to moderate increments in the YS and UTS of the extruded alloy. Specifically, each addition of 2 wt% Sn increases the YS and UTS by ~26 and ~20 MPa, respectively, which is attributed mainly to the additional precipitation hardening effect induced by the Mg_(2)Sn precipitates.

关键词： Mg-Bi-Sn alloy Extrusion Precipitation Microstructure Tensile property

Modulating the synergy of Pd@Pt core-shell nanodendrites for boosting methanol electrooxidation kinetics

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第34期165卷 153-160页

作者： Hyeon jeong Kim cheol Joo Moon Seokhee Lee Jayaraman Theerthagiri Jong Wook Hong Myong Yong Choi Young Wook Lee Department of Chemistry and Research Institute of Natural Sciences Gyeongsang National UniversityJinju 52828Republic of Korea Core-Facility Center for Photochemistry&Nanomaterials Gyeongsang National UniversityJinju 52828Republic of Korea Energy&Environment Division Korea Institute of Ceramic Engineering and Technology(KICET)Jinju 52851Republic of Korea Department of Chemistry University of UlsanUlsan 44610Republic of Korea Department of Education Chemistry and Research Institute of Natural Sciences Gyeongsang National UniversityJinju 52828Republic of Korea

The single-pot production of Pd@Pt core-shell structures is a promising approach as it offers large surface area,catalytic capability,and stability.In this work,we established a single-pot process to produce Pd@Pt core-shell nanodendrites with tunable composition,shape and size for optimal electrochemical activity.Pd@Pt nanodendrites with diverse compositions were synthesized by tuning the ratios of Pd and Pt sources in an aqueous environment using cetyltrimethylammonium chloride,which functioned as both the surfactant and the reducing agent at an elevated temperature(90°C).The synthesized Pd5@Pt5 nanodendrites showed exceptional electrochemical action toward the methanol oxidation reaction related with another compositional Pd@Pt nanodendrites and conventional Pt/C electrocatalysts.In addition,Pd5@Pt5 nanodendrites exhibited good CO tolerance owing to their surface features and the synergistic effect among Pt and Pd.Meanwhile,nanodendrites with a Pt-rich surface provided exceptional catalytic active sites.Compared with the conventional Pt/C electrocatalyst,the anodic peak current obtained by Pd5@Pt5 nanodendrites was 3.74 and 2.18 times higher in relations of mass and electrochemical active surface area-normalized current density,respectively.This approach offers an attractive strategy to design electrocatalysts with unique structures and outstanding catalytic performance and stability for electrochemical energy conversion.

关键词： Core-shell nanostructure Pd@Pt electrocatalysis One-pot synthesis Formation mechanism of nanodendrites Methanol oxidation reaction

Increased type III interferons and NK cell functions in SARS-CoV-2-infected children

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Signal Transduction and Targeted Therapy 2023年第3期8卷 888-890页

作者： Seong Dong jeong Hoyoung Lee Ju Young Chang Seong Yong Lee Ji Eun Choi Eunmi Yang Hye Won jeong Jae-Phil Choi Mi Seon Han Eui-cheol Shin The Center for Viral Immunology Korea Virus Research InstituteInstitute for Basic Science(IBS)Daejeon 34126Republic of Korea Department of Pediatrics Seoul Metropolitan Government-Seoul National University Boramae Medical Center and Seoul National University of College of MedicineSeoul 07061Republic of Korea Division of infectious diseases Seoul Medical CenterSeoul 02053Republic of Korea Department of Internal Medicine Chungbuk National University College of MedicineCheongju 28644Republic of Korea Graduate School of Medical Science and Engineering Korea Advanced Institute of Science and Technology(KAIST)Daejeon 34141Republic of Korea

Dear Editor,Severe acute respiratory syndrome coronavirus 2(SARS-CoV-2)infection is more likely to progress to severe disease in the elderly,and the rates of hospitalization for coronavirus disease 2019(COVID-19)increase with age.1,2 Herein,we comprehensively compared adaptive and innate immune responses between children and adults infected with SARS-CoV-2.

关键词： infected acute respiratory

Boost Up the Mechanical and Electrical Property of CNT Fibers by Governing Lyotropic Liquid Crystalline Mesophases with Aramid Polymers for Robust Lightweight Wiring Applications

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advanced Fiber Materials 2023年第2期5卷 514-526页

作者： Ki‑Hyun Ryu jeong‑Gil Kim Dongju Lee Seo Gyun Kim Bon‑cheol Ku Jun Yeon Hwang Kwang‑Un jeong Nam Dong Kim Dae‑Yoon Kim Functional Composite Materials Research Center Korea Institute of Science and TechnologyWanju 55324Republic of Korea Carbon Composite Materials Research Center Korea Institute of Science and TechnologyWanju 55324Republic of Korea Department of Polymer‑Nano Science and Technology Department of Nano Convergence EngineeringJeonbuk National UniversityJeonju 54896Republic of Korea Department of Chemical and Biomolecular Engineering Korea Advanced Institute of Science and TechnologyDaejeon 34141Republic of Korea

Monofilament type of polyaromatic amide(PA)and carbon nanotube(CNT)composite fibers is presented.A concept of a lyotropic liquid crystal(LLC)constructed via a spontaneous self-assembly is introduced to mitigate the extremely low com-patibility between PA and CNT.These approaches provide an effective co-processing route of PA and CNT simultaneously to fabricate the uniform,continuous,and reliable composite fibers through a wet-spinning.Interestingly,the addition of a small amount PA into the dope solution of CNT governs the LLC mesophase not only in a spinneret stage but also in a coagulant region.Thus,the developed PA/CNT composite fibers have the high uniaxial orientational order and the close interfacial packing compared to the pure CNT fibers.The PA/CNT composite fibers achieve the outstanding tensile strength,electrical conductivity,and electrochemical response,while maintaining a lightweight.They also exhibit the chemical,mechanical,and thermal robustness.All of these advantages can make flexible,sewable,and washable PA/CNT composite fibers ideal nanocomposite materials for use in next-generation information and energy transporting system by replacing conventional metal electrical conductors.

关键词： Carbon nanotube Aramid polymer Liquid crystal Composite fiber Electrical wire