检索结果-南通市图书馆

Rare Metals 2022年第8期41卷 2864-2876页

作者： chen-liang chu Wei-Ping chen Jun-chen Liu Qiang chen Zhi-Qiang Fu Guangdong Key Laboratory for Advanced Metallic Materials Processing South China University of TechnologyGuangzhou510641China Southwest Technology and Engineering Research Institute Chongqing400039China

Cold rolling and post-deformation annealing(PDA)heat treatments were used to produce heterogeneous grain structures(HGS)in a single-phase face-centered cubic(fcc)Cr_(10)Co_(30)Fe_(30)Ni_(30)high-entropy alloy(HEA).The microstructural evolution and microstructure-property relationship of the HEA were systematically studied under different *** could be achieved in PDA-treated samples at 875℃for 20 s and at 900℃for 20 s(PDA-900-20 s).PDA-900-20 s sample exhibits the most excellent combination of strength and ductility,showing a tensile yield strength of~590 MPa,an ultimate strength of~706 MPa and a total elongation of~23.9%.Additionally,compared with the homogenized counterpart exhibiting homogenous grains,PDA-900-20 s sample displays a notable increment of~413%in yield strength and simultaneously maintains a good *** dominated strengthening mechanisms in PDA-900-20 s sample are grain-boundary strengthening and heterogeneous deformation-induced(HDI)strengthening,whereas the good ductility is mainly resulted from the HDI ***,the present study provides an effective and simple pathway to overcome the strength-ductility tradeoff of typical fcc HEAs through heterogeneous microstructure.

关键词： High-entropy alloy Heterogeneous grain structures Hetero-deformation-induced hardening Mechanical properties Strengthening mechanism

Microstructure and mechanical properties of as-cast(CuNi)100-xCox medium-entropy alloys

在线全文

学校读者我要写书评

暂无评论

China Foundry 2022年第6期19卷 511-518页

作者： Zhi-yong Yang Wei-ping chen liang-yan Hao chen-liang chu Da-hai Zeng Wei Xiong Zhi-qiang Fu Guangdong Key Laboratory for Advanced Metallic Materials Processing South China University of TechnologyGuangzhou 510640China Physical Metallurgy and Materials Design Laboratory Department of Mechanical Engineering and Materials ScienceUniversity of PittsburghPittsburghPA15261USA National Engineering Research Center of Near-net-shape Forming for Metallic Materials South China University of TechnologyGuangzhou 510640China

Microstructure and mechanical properties of non-equiatomic(CuNi)_(100-x)Co_(x)(x=15,20,25 and 30,at.%)medium-entropy alloys(MEAs)prepared by vacuum arc-melting were *** show that all the as-cast MEAs exhibit dual face-centered cubic(fcc)solid-solution phases with identical lattice constant,showing typical dendrite structure consisting of(Ni,Co)-rich phase in dendrites and Cu-rich phase in *** positive enthalpy of mixing among Cu and Ni-Co elements is responsible for the segregation of *** the increase of Co content,the volume fraction of(Ni,Co)-rich phase increases while the Cu-rich phase decreases,resulting in an increment of yield strength and a decrement of elongation for the(CuNi)_(100-x)Co_(x) ***-indentation test results show a great difference of microhardness between the two fcc phases of the *** measured microhardness value of the(Ni,Co)-rich phase is almost twofold as compared to that of the Cu-rich phase in all the(CuNi)_(100-x)Co_(x) *** the deformation of the MEAs,the Cu-rich phase bears the main plastic strain,whereas the(Ni,Co)-rich phase provides more pronounced strengthening.

关键词： medium-entropy alloys microstructure mechanical properties nano-indentation

Morphology engineering of ZnO micro/nanostructures under mild conditions for optoelectronic application

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 498-503页

作者： liang chu Haoyu Shen Hudie Wei Hongyu chen Guoqiang Ma Wensheng Yan Institute of Carbon Neutrality and New Energy&School of Electronics and Information Hangzhou Dianzi UniversityHangzhou 310018China School of Applied Physics and Materials Wuyi UniversityJiangmen 529020China

Zinc oxide(ZnO)serves as a crucial functional semiconductor with a wide direct bandgap of approximately 3.37 *** reaction is commonly used in the synthesis of ZnO micro/nanostructures,given its low cost,simplicity,and easy ***,ZnO morphology engineering has become desirable through the alteration of minor conditions in the reaction process,particularly at room *** this work,ZnO micro/nanostructures were synthesized in a solution by varying the amounts of the ammonia added at low temperatures(including room temperature).The formation of Zn^(2+)complexes by ammonia in the precursor regulated the reaction rate of the morphology engineering of ZnO,which resulted in various structures,such as nanoparticles,nanosheets,microflowers,and single ***,the obtained ZnO was used in the optoelectronic application of ultraviolet detectors.

关键词： morphology engineering low temperature ZnO nanosheets microflowers ultraviolet detector

Efficient photocatalytic reduction of CO2 to formate by a molecular noble metal-free system

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 152-156页

作者： Lihua Zhang Lingjing chen Huatian Shi Yue Wei Gui chen Tai-chu Lau School of Environment and Civil Engineering Research Center for Eco-environmental Engineering Dongguan University of Technology Department of Chemistry and Institute of Molecular Functional Materials City University of Hong Kong

Reducing CO2to carbon-neutral solar fuels can not only alleviate the energy demand but also mitigate the greenhouse *** present,developing an efficient non-noble metal photo/electrocatalytic system for converting CO2to a specific product beyond CO is still a big ***,we report a new cobalt complex bearing 2,2′-bi-1,10-phenanthroline ligand that can photocatalytically reduce CO2to formate （HCOO-）.Turnover number （TON） for HCOO-up to 677 with 99%selectivity can be achieved using organic dyes purpurin as photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole （BIH） as sacrificial reductant in a CO2-saturated NMP/TEA （v/v,3:1） solution under visible light *** potential electrolysis at-1.41 V （***/Ag Cl） in the presence of 12 m M Et3NHBF4also produced HCOO-with Faradaic efficiency of 39%.Spectroscopic and electrochemical studies suggest that a[CoI-H]species is the key intermediate for CO2reduction.

关键词： photocatalysis noble metal-free CO2 reduction formate cobalt hydride

Evolution and distribution of Al_2Sm phase in as-extruded AZ61-xSm magnesium alloys during semi-solid isothermal heat-treatment

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2018年第7期28卷 1311-1320页

作者： chen-liang chu Zhi HU Xiao LI Hong YAN Xiao-quan WU Yuan-lu MAI Institute of Advanced Forming Nanchang UniversityNanchang 330031China Key Laboratory of Light Alloy Preparation ＆ Processing in Nanchang City Nanchang UniversityNanchang 330031China

The evolution and distribution of Al2Sm phase in as-extruded AZ61-xSm（x=0, 1.5, 2.0 and 2.5, mass fraction, %） magnesium alloys during semi-solid isothermal heat treatment were investigated. The results showed that when as-extruded AZ61 magnesium alloys were modified with Sm, the smaller and rounder grains were obtained during semi-solid isothermal heat treatment. When the Sm content is 2.0%（mass fraction）, the average size of the globular grains reached the smallest value of 90 μm. Although a few Al2Sm particles existed in the α-Mg grains, most of Al2Sm particles solidified at the edge of the globular grains with the width of 20 μm. These phenomena are mainly attributed to the forces acting on Al2Sm particles in front of the solid-liquid interface, leading to Al2Sm particles accumulating at the solid-liquid interface and then solidifying at the edge of the globular grains in the quenching process.

关键词： magnesium alloy rare earth element semi-solid isothermal heat treatment Al2Sm particle

(Ti_(60)Cr_(30)Nb_(10))_(100-x)Al_(x)轻质中熵合金的力学与腐蚀性能

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2024年第1期34卷 219-235页

作者：王浩陈维平郝良彦褚晨亮熊伟付志强华南理工大学广东省金属新材料制备与成形重点实验室广州510641 华南理工大学国家金属材料近净成形工程技术研究中心广州510641 Physical Metallurgy and Materials Design Laboratory Department of Mechanical Engineering and Materials ScienceUniversity of PittsburghPittsburghPA15261USA

研究轻质(Ti_(60)Cr_(30)Nb_(10))_(100-x)Al_(x)(x=0,5,7.5,10,摩尔分数,%)中熵合金在铸态和均匀化态下的显微组织、力学性能和腐蚀行为。结果表明,随着Al含量从0增加到10%(摩尔分数),铸态合金均由相同的相组成,即体心立方(BCC)相和少... 详细信息

研究轻质(Ti_(60)Cr_(30)Nb_(10))_(100-x)Al_(x)(x=0,5,7.5,10,摩尔分数,%)中熵合金在铸态和均匀化态下的显微组织、力学性能和腐蚀行为。结果表明,随着Al含量从0增加到10%(摩尔分数),铸态合金均由相同的相组成,即体心立方(BCC)相和少量TiCr2型Laves相组成。均匀化后,所有合金均由单相BCC组成。此外,(Ti_(60)Cr_(30)Nb_(10))_(95)A_(l5)中熵合金表现出在铸态和均匀态条件下最优异的力学性能,屈服强度分别约为1048 MPa和1017 MPa,同时保持超50%压缩应变。与TC4和铸态(Ti_(60)Cr_(30)Nb_(10))_(95)A_(l5)合金相比,均匀态(Ti_(60)Cr_(30)Nb_(10))_(95)A_(l5)合金表现出更优异的耐腐蚀性能,这主要归因于均匀的显微组织与化学成分。

关键词：中熵合金轻质合金显微组织力学性能腐蚀行为

同时旋转起偏器和检偏器的红外椭圆偏振光谱仪研制

在线全文

学校读者我要写书评

暂无评论

红外与毫米波学报 1998年第5期17卷 321-326页

作者：黄志明金世荣陈诗伟陈敏辉史国良陈良尧褚君浩中国科学院上海技术物理研究所红外物理国家重点实验室

研制成测量材料光学特性的红外椭圆偏振光谱仪，其测量波长范围为２．５～１２．５μｍ，入射角度在２０°～９０°连续可变．系统数据采集、前放自动增益控制、入射角度和波长设置及扫描均由计算机自动控制．给出了金反射率和ＧａＡｓ... 详细信息

研制成测量材料光学特性的红外椭圆偏振光谱仪，其测量波长范围为２．５～１２．５μｍ，入射角度在２０°～９０°连续可变．系统数据采集、前放自动增益控制、入射角度和波长设置及扫描均由计算机自动控制．给出了金反射率和ＧａＡｓ体材料折射率椭偏测量，并与其它方法进行了对比。

关键词：红外椭圆偏振光谱仪椭偏参数光学常数

Nanomaterials-mediated lysosomal regulation:a robust protein-clearance approach for the treatment of Alzheimer’s disease

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第2期20卷 424-439页

作者： Mengqi Hao Jianjian chu Tinglin Zhang Tong Yin Yuankai Gu Wendanqi liang Wenbo Ji Jianhua Zhuang Yan Liu Jie Gao You Yin Department of Neurology Second Affiliated Hospital of Naval Medical University(Shanghai Changzheng Hospital)ShanghaiChina School of Health Science and Engineering University of Shanghai for Science and TechnologyShanghaiChina Changhai Clinical Research Unit Shanghai Changhai HospitalNaval Medical UniversityShanghaiChina Department of Clinical Pharmacy Xinhua HospitalShanghai Jiao Tong University School of MedicineShanghaiChina Department of Neurology Shanghai East HospitalSchool of MedicineTongji UniversityShanghaiChina

Alzheimer’s disease is a debilitating,progressive neurodegenerative disorder characterized by the progressive accumulation of abnormal proteins,including amyloid plaques and intracellular tau tangles,primarily within the ***,crucial intracellular organelles responsible for protein degradation,play a key role in maintaining cellular *** studies have suggested a link between the dysregulation of the lysosomal system and pathogenesis of neurodegenerative diseases,including Alzheimer’s *** the normal physiological function of lysosomes hold the potential to reduce the pathological burden and improve the symptoms of Alzheimer’s ***,the efficacy of drugs in treating Alzheimer’s disease is limited,with major challenges in drug delivery efficiency and ***,nanomaterials have gained widespread use in Alzheimer’s disease drug research owing to their favorable physical and chemical *** review aims to provide a comprehensive overview of recent advances in using nanomaterials(polymeric nanomaterials,nanoemulsions,and carbon-based nanomaterials)to enhance lysosomal function in treating Alzheimer’s *** review also explores new concepts and potential therapeutic strategies for Alzheimer’s disease through the integration of nanomaterials and modulation of lysosomal *** conclusion,this review emphasizes the potential of nanomaterials in modulating lysosomal function to improve the pathological features of Alzheimer’s *** application of nanotechnology to the development of Alzheimer’s disease drugs brings new ideas and approaches for future treatment of this disease.

关键词： Alzheimer’s disease autophagy dysfunction lysosomal acidification lysosomal system nanomaterials neurodegenerative diseases

Treadmill exercise in combination with acousto-optic and olfactory stimulation improves cognitive function in APP/PS1 mice through the brain-derived neurotrophic factor-and Cygb-associated signaling pathways

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第9期20卷 2706-2726页

作者： Biao Xiao Chaoyang chu Zhicheng Lin Tianyuan Fang Yuyu Zhou chuxia Zhang Jianghui Shan Shiyu chen Liping Li Department of Physiology and Pharmacology Health Science CenterNingbo UniversityNingboZhejiang ProvinceChina Ningbo Key Laboratory of Behavioral Neuroscience Health Science CenterNingbo UniversityNingboZhejiang ProvinceChina Key Laboratory of Addiction Research of Zhejiang Province NingboZhejiang ProvinceChina

A reduction in adult neurogenesis is associated with behavioral abnormalities in patients with Alzheimer's ***,enhancing adult neurogenesis represents a promising therapeutic approach for mitigating disease symptoms and ***,nonpharmacological interventions aimed at inducing adult neurogenesis are currently *** individual non-pharmacological interventions,such as aerobic exercise,acousto-optic stimulation,and olfactory stimulation,have shown limited capacity to improve neurogenesis and cognitive function in patients with Alzheimer's disease,the therapeutic effect of a strategy that combines these interventions has not been fully *** this study,we observed an age-dependent decrease in adult neurogenesis and a concurrent increase in amyloid-beta accumulation in the hippocampus of amyloid precursor protein/presenilin 1 mice aged 2-8 *** deposition became evident at 4 months,while neurogenesis declined by 6 months,further deteriorating as the disease ***,following a 4-week multifactor stimulation protocol,which encompassed treadmill running(46 min/d,10 m/min,6 days per week),40 Hz acousto-optic stimulation(1 hour/day,6 days/week),and olfactory stimulation(1 hour/day,6 days/week),we found a significant increase in the number of newborn cells(5'-bromo-2'-deoxyuridine-positive cells),immature neurons(doublecortin-positive cells),newborn immature neurons(5'-bromo-2'-deoxyuridine-positive/doublecortin-positive cells),and newborn astrocytes(5'-bromo-2'-deoxyuridine-positive/glial fibrillary acidic protein-positive cells).Additionally,the amyloid-beta load in the hippocampus *** findings suggest that multifactor stimulation can enhance adult hippocampal neurogenesis and mitigate amyloid-beta neuropathology in amyloid precursor protein/presenilin 1 ***,cognitive abilities were improved,and depressive symptoms were alleviated in amyloid precursor protein/presenilin 1 mice

关键词： acousto-optic stimulation adult neurogenesis Alzheimer's disease amyloid precursor protein/presenilin 1 mice amyloid-beta deposition brain cell apoptosis cognitive impairment depression-like behavior involuntary treadmill exercise olfactory stimulation serum metabolites

Prediction and optimization of flue pressure in sintering process based on SHAP

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 346-359页

作者： Mingyu Wang Jue Tang Mansheng chu Quan Shi Zhen Zhang School of Metallurgy Northeastern UniversityShenyang 110819China Liaoning Low-Carbon Steelmaking Technology Engineering Research Center Northeastern UniversityShenyang 110819China Engineering Research Center of Frontier Technologies for Low-Carbon Steelmaking(Ministry of Education) Shenyang 110819China

Sinter is the core raw material for blast *** pressure,which is an important state parameter,affects sinter *** this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment ***,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction *** effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment *** operating parameter combination was then *** flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.

关键词： sintering process flue pressure shapley additive explanation prediction optimization