检索结果-南通市图书馆

Numerical Analysis of Cold-Formed Thin-Walled Steel Short Columns with Pitting Corrosion during Bridge Construction

Structural Durability & Health Monitoring 2024年第2期18卷 181-196页

作者： Hongz.ang Wang Jing Guo Shanjun Yang Chaoheng cheng Jing chen z.ihao chen CCCC Second Harbor Engineering Third Engineering Co. Ltd.Zhenjiang212000China Suqian Highway Development Center Suqian223800China School of Mechanics and Civil Engineering China University of Mining and TechnologyXuzhou221116China

Pitting corrosion is harmful during bridge construction,which will lead to uneven roughness of steel surfaces and reduce the thickness of ***,the effect of pitting corrosion on the mechanical properties of cold-formed thin-walled steel stub columns is studied,and the empirical formulas are established through regression fitting to predict the ultimate load of web and flange under pitting *** detail,the failure modes and load-displacement curves of specimens with different locations,area ratios,and depths are obtained through a large number of non-linear finite element *** for the specimens with pitting corrosion on the web,all the specimens are subject to local buckling failure,and the failure mode will not change with pitting corrosion,but the failure location will change with pitting corrosion location;the siz.,location,and area ratio of pitting corrosion have little influence on the ultimate load of cold-formed thin-walled steel short columns,but the loss rate of pitting corrosion section area has a greater impact on the ultimate bearing *** for the specimen with flange pitting corrosion,the location and area ratio of pitting corrosion have less influence on the ultimate load of cold-formed thin-walled steel short columns,and the section area loss rate has greater influence on the ultimate bearing capacity;the impact of web pitting corrosion on the ultimate load is greater than that of flange pitting corrosion under the same condition of pitting corrosion section *** prediction formulas of limit load which are suitable for pitting corrosion of web and flange are established,which can provide a reference for performance evaluation of corroded cold-formed thin-walled steel.

关键词： Pitting corrosion cold-formed thin-walled steel ultimate load prediction formula short columns

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analytical Solution for the Reissner-Sagoci Problem of a Piez.electric Half-Space

引用

Acta Mechanica Solida Sinica 2024年第3期37卷 363-370页

作者： Keqiang Hu Cun-Fa Gao z.ngtao chen z.eng z.ong State Key Laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and AstronauticsNanjing210016China Department of Mechanical Engineering University of AlbertaEdmontonABT6G 1H9Canada School of Science Harbin Institute of TechnologyShenzhen518055China

In this paper,a transversely isotropic piez.electric half-space with the isotropy axis parallel to the z.axis is considered under rotation on a rigid circular disk bonded to the surface of the piez.electric *** is a type of Reissner-Sagoci mixed boundary value *** utiliz.ng the Hankel transform,the mixed boundary value problem is simplified into solving a pair of dual integral ***-field analytical expressions for displacement,stresses,and electric displacement inside the half-space are *** shear stresses and electric displacement on the surface are found to be singular at the edge of the rigid circular disk,and the stress intensity factors and electric displacement intensity factor are *** results show that material properties and geometric siz. have significant effects on displacement,shear stresses,and electric displacement.

关键词： Piez.electric half-space Circular disk Reissner-Sagoci problem Stress intensity factor Electric displacement intensity factor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Repeat-pass space-surface bistatic SAR tomography:accurate imaging and first experiment

引用

Science China(Information Sciences) 2024年第9期67卷 245-262页

作者： z.iyang chen Yuanhao LI cheng HU Shenglei WANG Xinpeng chen Mihai DATCU Andrea Virgilio MONTI-GUARNIERI Radar Technology Research Institute School of Information and Electronics Beijing Institute of Technology Beijing Key Laboratory of Embedded Real-Time Information Processing Technology Beijing Institute of Technology Advanced Technology Research Institute Beijing Institute of Technology CEOSpace Tech University Politehnica of Bucharest Dipartimento di Elettronica Informazione e Bioingegneria Politecnico di Milano

Space-surface bistatic synthetic aperture radar(SS-BiSAR) offers an additional observation angle for monostatic spaceborne SAR, making it a promising technology for high-accuracy deformation retrieval technology in local regions. Repeat-pass SS-BiSAR tomography can accurately estimate the surfaces of buildings and steep areas, effectively removing terrain phases during deformation retrieving. However, inaccuracies in the orbital ephemeris can lead to image geometry distortion, reducing image pair coherence,introducing interferometric phase errors, and consequently deteriorating tomographic precision. This paper precisely models the image geometry distortion and interferometric phase error caused by repeat-pass ephemeris error. We propose an ephemeris correction method based on the chirp-z.transform to address these issues. Furthermore, we introduce an accurate tomography model to improve 3D reconstruction *** first SS-BiSAR tomography experiment, conducted using the Chinese Lutan-1 satellite, demonstrates that the correlation coefficient is improved by 0.16 after ephemeris error correction. Moreover, the density and precision of the tomographic point cloud are improved by 13.7% and 12.1%, respectively.

关键词： space-surface SAR tomography orbit error image distortion Lutan-1

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Hot deformation behavior and microstructure evolution of GH3536-TiB_(2) composites fabricated by powder metallurgy

引用

Science China(Technological Sciences) 2024年第7期67卷 2107-2124页

作者： z.OU ShiPeng WANG Shuai HUANG LuJun z.ANG Rui chen Xin MENG FanChao chen Run SUN FengBo WANG CunYu GENG Lin School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China Waikato Centre for Advanced Materials and Manufacturing School of EngineeringUniversity of WaikatoHamilton 3240New Zealand State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China

The hot deformation behavior and microstructure evolution of GH3536-TiB2composites fabricated by powder metallurgy(PM)were examined in the temperature range of 950–1150℃ and strain rate range of 0.001–1 s^(-1). The hot compression stress-strain curves and the constitutive equation were obtained. In addition, the hot processing map was drawn, which indicated that the appropriate hot working window was 950–1050℃/0.001–0.1 s^(-1)and 1050–1100℃/0.001–0.01 s^(-1). The microstructure analysis showed that the splitting and spheroidiz.tion of M3B2led to a decrease in siz. and volume fraction at 950–1100℃. At 1150℃,the eutectic microstructure of M_(3)B_(2)+ γ was formed due to the dissolution of M_(3)B_(2), which caused macroscopic cracking of the deformed sample. Additionally, the deformation temperature and the strain rate had little effect on the siz. and volume fraction of M_(3)B_(2). Besides, discontinuous dynamic recrystalliz.tion(DDRX) and continuous dynamic recrystalliz.tion(CDRX) were found in the deformed microstructure, while the former was dominant. Within the test range of this work, the dynamic recrystalliz.tion(DRX) fraction of the deformed composites was high due to the bulging nucleation of numerous interfaces. The DRX grain siz. increased with increasing deformation temperature or decreasing strain rate. Texture analysis showed that the deformation texture of //compression direction RD existed in the matrix when the deformation temperature was below 1100℃, and the texture type became //RD at 1100℃. Additionally, it was also found that the //RD texture was formed in M3B2under the strain rates of 0.1 and 0.01 s^(-1).

关键词： GH3536 alloy matrix composites powder metallurgy hot deformation behavior microstructure evolution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Realiz.tion of flexible in-memory computing in a van der Waals ferroelectric heterostructure tri-gate transistor

引用

Nano Research 2024年第3期17卷 1886-1892页

作者： Xinz.u Gao Quan chen Qinggang Qin Liang Li Meiz.uang Liu Derek Hao Junjie Li Jingbo Li z.ongchang Wang z.xin chen School of Semiconductor Science and Technology South China Normal UniversityFoshan 528225China Guangdong Provincial Key Laboratory of Chip and Integration Technology Guangzhou 510631China Institute of Solid State Physics Hefei Institutes of Physical Science Chinese Academy of SciencesHefei 230601China School of Science STEM CollegeRMIT UniversityMelbourne 3000Australia CAS Key Laboratory of Functional Materials and Devices for Special Environments Xinjiang Technical Institute of Physics&ChemistryChinese Academy of SciencesUrumqi 830011China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China College of Optical Science and Engineering Zhejiang UniversityHangzhou 310027China International Iberian Nanotechnology Laboratory(INL) Av.Mestre Jose Veiga s/nBraga 4715-330Portugal

Combining logical function and memory characteristics of transistors is an ideal strategy for enhancing computational efficiency of transistor ***,we rationally design a tri-gate two-dimensional(2D)ferroelectric van der Waals heterostructures device based on copper indium thiophosphate(CuInP_(2)S_(6))and few layers tungsten disulfide(WS_(2)),and demonstrate its multi-functional applications in multi-valued state of data,non-volatile storage,and logic *** co-regulating the input signals across the tri-gate,we show that the device can switch functions flexibly at a low supply voltage of 6 V,giving rise to an ultra-high current switching ratio of 107 and a low subthreshold swing of 53.9 mV/*** findings offer perspectives in designing smart 2D devices with excellent functions based on ferroelectric van der Waals heterostructures.

关键词： two-dimensional(2D)ferroelectric heterostructure tri-gate polymorphic regulation in-memory computing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rational Design of Plasmonic Nanoparticle-Molecule Complexes for Chirality Sensing

引用

Chinese Journal of Chemistry 2024年第8期42卷 903-919页

作者： chen Wang Dandan Lu Lichao Sun Qingfeng z.ang College of Chemistry and Molecular Sciences Wuhan UniversityWuhanHubei430072 China

Comprehensive Summary,Sensing the chirality of molecules is of great importance to fields such as enantioselective synthesis,pharmaceutical industry,and *** nanoparticles are ideal candidates for molecular sensing due to their inherent plasmonic properties that significantly enhance their sensitivity to surrounding *** plasmonic nanoparticle-molecule complexes for chirality sensing has drawn enormous attention in recent years due to their intriguing properties and potential ***,in this review,we believe it is timely to circumnavigate the rational design of plasmonic nanoparticle-molecule complexes and widen the scope of their emerging applications in chirality ***,we present different fundamental mechanisms for plasmon-based chirality that are built on the system of plasmonic nanoparticle-molecule ***,we review the typical applications of plasmonic nanoparticle-molecule complexes in chirality ***,we discuss the emerging biomedical applications that the plasmon-based chirality has attracted enormous ***,we provide an outlook on the challenges and opportunities in the field of plasmonic approaches for chirality sensing.

关键词： Chirality Surface plasmon resonance Nanoparticles Chiral molecules Chirality sensing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-Efficiency Dynamic Terahertz.Deflector Utiliz.ng a Mechanically Tunable Metasurface

引用

Research 2024年第3期2023卷 585-594页

作者： z.enci Sun Chao Liang chen chen Xiayu Wang Enz. z.ou Xiaomeng Bian Yuanmu Yang Rui You Xiaoguang z.ao Jiahao z.ao z.eng You Department of Precision Instrument Tsinghua UniversityBeijing 100084China State Key Laboratory of Precision Measurement Technology and Instruments Tsinghua UniversityBeijing 100084China Beijing Advanced Innovation Center for Integrated Circuits Beijing 100084China School of Instrument Science and Opto-Electronic Engineering Beijing Information Science and Technology UniversityBeijing 100016China.

Terahertz.(THz. wave manipulation, especially the beam deflection, plays an essential role in various applications, such as next-generation communication, space exploration, and high-resolution imaging. Current THz.optical components and devices are hampered by their large bulk siz.s and passive responses, limiting the development of high-performance, miniaturiz.d THz.microsystems. Tunable metasurfaces offer a powerful dynamic optical platform for controlling the propagation of electromagnetic waves. In this article, we presented a mechanically tunable metasurface (MTM), which can achieve terahertz.beam deflection and vary the intensity of the anomalous reflected terahertz.wave by changing the air gap between the metallic resonator (MR) array with phase discontinuities and Au ground plane. The absence of lossy spacer materials substantially enhances deflection efficiency. The device was fabricated by a combination of the surface and bulk-micromachining processes. The THz.beam steering capability was characteriz.d using terahertz.time domain spectroscopy. When the air gap is 50 μm, the maximum deflection coefficient reaches 0.60 at 0.61 THz.with a deflection angle of ~44.5°, consistent with theoretical predictions. We further established an electrically tunable miniaturiz.d THz.device for dynamic beam steering by introducing a micro voice coil motor to control the air gap continuously. It is shown that our designed MTM demonstrates a high modulation depth of deflection coefficient (~ 62.5%) in the target steered angle at the operating frequency. Our results showcase the potential of the proposed MTM as a platform for high-efficiency THz.beam manipulation.

关键词： tunable Efficiency resonator

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Precise determination of the pole position of the exotic z.(c)(3900)

引用

Science China(Physics,Mechanics & Astronomy) 2024年第9期67卷 84-90页

作者： Yun-Hua chen Meng-Lin Du Feng-Kun Guo School of Mathematics and Physics University of Science and Technology BeijingBeijing 100083China School of Physics University of Electronic Science and Technology of ChinaChengdu 611731China CAS Key Laboratory of Theoretical Physics Institute of Theoretical PhysicsChinese Academy of SciencesBeijing 100190China School of Physical Sciences University of Chinese Academy of SciencesBeijing 100049China Peng Huanwu Collaborative Center for Research and Education Beihang UniversityBeijing 100191China

We perform a unified description of the experimental data of the π^(+)π^(-)and J/ψπ^(±)invariant mass spectra for e^(+)e^(-)→J/ψπ^(+)π^(-)and the D^(0)D^(*-)mass spectrum for e^(+)e^(-)→D^(0)D^(*-)π^(+)at e^(+)e^(-)center-of-mass energies 4.23 and 4.26 *** analysis takes into account open-charm meson loops that contain triangle singularities,the J/ψπ-DD^(*)coupled-channel interaction respecting unitarity,and the strong ππ-KK final state interaction using dispersion *** analysis leads to a precise determination of the z.(c)(3900)pole with the pole mass and width(3880.7±1.7_(stat)±22.4_(syst))MeV and(35.9±1.4_(stat)±15.3_(syst))MeV,respectively,and hints at that the DD^(*)molecular and non-molecular components are of similar importance in the z.(c)(3900)formation.

关键词： exotic hadrons dispersion relations final state interaction triangle singularity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Implications of the Stellar Mass Density of High-z.Massive Galaxies from JWST on Warm Dark Matter

引用

Research in Astronomy and Astrophysics 2024年第1期24卷 128-134页

作者： Hengjie Lin Yan Gong Bin Yue Xuelei chen National Astronomical Observatories Chinese Academy of SciencesBeijing 100101China University of Chinese Academy of Sciences Beijing 100049China Science Center for China Space Station Telescope National Astronomical ObservatoriesChinese Academy of SciencesBeijing 100101China Department of Physics College of SciencesNortheastern UniversityShenyang 110819China Center for High Energy Physics Peking UniversityBeijing 100871China

A significant excess of the stellar mass density at high redshift has been discovered from the early data release of James Webb Space Telescope(JWST),and it may require a high star formation ***,this will lead to large number density of ioniz.ng photons in the epoch of reioniz.tion(EoR),so that the reioniz.tion history will be changed,which can arise tension with the current EoR *** dark matter(WDM),via the free streaming effect,can suppress the formation of small-scale structure as well as low-mass *** provides an effective way to decrease the ioniz.ng photons when considering a large star formation efficiency in high-z.massive galaxies without altering the cosmic reioniz.tion *** the other hand,the constraints on the properties of WDM can be derived from the JWST *** this work,we study WDM as a possible solution to reconcile the JWST stellar mass density of high-z.massive galaxies and reioniz.tion *** find that,the JWST high-z.comoving cumulative stellar mass density alone has no significant preference for either CDM or WDM *** using the observational data of other stellar mass density measurements and reioniz.tion history,we obtain that the WDM particle mass with mw=0.51_(-0.12)^(+0.22) keV and star formation efficiency parameter f_(*)^(0)> 0.39 in 2σ confidence level can match both the JWST high-z.comoving cumulative stellar mass density and the reioniz.tion history.

关键词： Cosmology (cosmology:)dark matter (cosmology:)large-scale structure of universe

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A review of solid-state lithium metal batteries through in-situ solidification

引用

Science China Chemistry 2024年第1期67卷 67-86页

作者： Pan Xu z.ng-Yao Shuang chen-z. z.ao Xue Li Li-z.en Fan Aibing chen Haoting chen Elena Kuz.ina Elena Karaseva Vladimir Kolosnitsyn Xiaoyuan z.ng Peng Dong Yingjie z.ang Mingpei Wang Qiang z.ang Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology Department of Chemical EngineeringTsinghua UniversityBeijing 100084China National and Local Joint Engineering Laboratory for Lithium-ion Batteries and Materials Preparation Technology Key Laboratory of Advanced Battery Materials of Yunnan ProvinceFaculty of Metallurgical and Energy EngineeringKunming University of Science and TechnologyKunming 650093China Institute of Advanced Materials and Technology University of Science and Technology BeijingBeijing 100083China College of Chemical and Pharmaceutical Engineering Hebei University of Science and TechnologyShijiazhuang 050018China Ordos Carbon Neutral Research and Application Co. Ltd.Ordos City 017010China Ufa Institute of Chemistry UFRC RAS Ufa 450054Russia Institute for Carbon Neutrality Tsinghua UniversityBeijing 100084China Shanxi Research Institute for Clean Energy Tsinghua UniversityTaiyuan 030032China

High-energy-density lithium metal batteries are the next-generation battery systems of choice,and replacing the flammable liquid electrolyte with a polymer solid-state electrolyte is a prominent conduct towards realiz.ng the goal of high-safety and high-specific-energy ***,the inherent intractable problems of poor solid-solid contacts between the electrode/electrolyte and the growth of Li dendrites hinder their practical *** in-situ solidification has demonstrated a variety of advantages in the application of polymer electrolytes and artificial interphase,including the design of integrated polymer electrolytes and asymmetric polymer electrolytes to enhance the compatibility of solid–solid contact and compatibility between various electrolytes,and the construction of artificial interphase between the Li anode and cathode to suppress the formation of Li dendrites and to enhance the high-voltage stability of polymer *** review firstly elaborates the history of in-situ solidification for solid-state batteries,and then focuses on the synthetic methods of solidified ***,the recent progress of in-situ solidification technology from both the design of polymer electrolytes and the construction of artificial interphase is summariz.d,and the importance of in-situ solidification technology in enhancing safety is ***,prospects,emerging challenges,and practical applications of in-situ solidification are envisioned.

关键词： in-situ solidification polymer electrolyte artificial solid electrolyte interphase rechargeable lithium metal batteries dendrite-free lithium metal anode

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：