检索结果-南通市图书馆

Effects of argon blowing at tundish upper nozzle on multiphase flow behavior in nozzle

Journal of Iron and Steel Research International 2022年第4期29卷 588-600页

作者： Xu-feng Qin chang-gui cheng Yang Li Wei-li Wu Yan Jin The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina

In continuous casting,the argon blowing at the tundish upper nozzle is usually used to prevent nozzle clogging,whose effect is closely related to the migration of argon bubbles and the flow behavior of the liquid steel in the ***,to investigate the effects of argon blowing at the tundish upper nozzle on multiphase flow behavior in nozzle,a threedimensional model of the tundish–nozzle–mold was established for numerical *** results indicate that the argon bubbles injected from the inner wall of the tundish upper nozzle first move downward along the nozzle wall under the action of the liquid *** the distance from the tundish upper nozzle increases,the argon bubbles gradually diffuse to the center of the *** with no argon blowing,the liquid steel velocity increases in the center of the nozzle and decreases near the wall with argon *** increasing the argon flow rate,the concentration of bubbles in the nozzle increases,and the process of bubble group diffusion to the center region of the nozzle speeds *** in turn increases the liquid steel velocity at the center of the nozzle but reduces near the *** increasing the casting speed,the concentration of bubbles in the nozzle decreases,the length of the bubble group near the nozzle wall is extended,and the liquid steel velocity at the center region and near-wall region of the nozzle *** mechanism of argon blowing at the tundish upper nozzle to prevent nozzle clogging is mainly realized by the isolation effect of the argon bubble group on the inner wall of the nozzle.

关键词： Argon blowing Tundish upper nozzle Nozzle clogging Numerical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flow and heat transfer of liquid slag in a continuous casting mold

引用

Journal of Iron and Steel Research International 2019年第9期26卷 926-940页

作者： Hai-biao Lu chang-gui cheng Yang Li Xu-feng Qin Yan Jin The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina

A three-dimensional mathematical model for coupled liquid steel and liquid slag was established to study the flow and heat transfer behavior of liquid slag. Based on the volume of fluid method and the heat transfer model, the effect of different casting parameters on the flow and heat transfer of the liquid slag was investigated. The results show that there are two different size recirculation zones of the liquid slag layer on the liquid steel in the mold center plane, extending from the submerged entry nozzle to the mold narrow face. With the increase in the casting speed and the decrease in the viscosity of the mold flux, the overall velocity and the temperature of the liquid slag increase. With the increase in the inclination angle and the submergence depth of the submerged entry nozzle, the temperature of the liquid slag decreases, and the velocity decreases near the mold narrow face and increases in the vicinity of the submerged entry nozzle. The inactive flow field and the low temperature of liquid slag within 100 mm of the submerged entry nozzle may intensify the surface longitudinal cracking sensitivity of the slab. When the lubrication and heat transfer are well regulated between the surface of mold and the mold flux film, low casting speed, large inclination angle and submergence depth of the submerged entry nozzle are beneficial for reducing the possibility of a slab surface longitudinal crack.

关键词： Continuous casting Liquid slag Flow Heat transfer Surface longitudinal cracking sensitivity Mathematical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

引用

China Foundry 2024年第2期21卷 185-196页

作者： Wei-li Wu chang-gui cheng Yang Li Shi-fa Wei De-li Chen The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081China Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081China Technology Center Fushun Special Steel Co.Ltd.Fushun 113001LiaoningChina

In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab *** order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT *** show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either *** the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes *** increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction.

关键词： continuous casting secondary cooling zone internal mixing air-mist nozzle droplet characteristics liquid phase distribution water flow rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of Ti(C,N)precipitates on austenite growth of micro-alloyed steel during continuous casting

引用

China Foundry 2017年第5期14卷 421-428页

作者： Liu Yang Yang Li Zheng-liang Xue chang-gui cheng The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081China Steelmaking Plant of WISCO Wuhan 430083China

Austenite grain size is an important influence factor for ductility of steel at high temperatures during continuous casting. Thermodynamic and kinetics calculations were performed to analyze the characteristics of Ti(C,N) precipitates formed during the continuous casting of micro-alloyed steel. Based on Andersen-Grong equation, a coupling model of second phase precipitation and austenite grain growth has been established, and the influence of second precipitates on austenite grain growth under different cooling rates is discussed. Calculations show that the final sizes of austenite grains are 2.155, 1.244, 0.965, 0.847 and 0.686 mm, respectively, under the cooling rate of 1, 3, 5, 7, and 10 ℃·s^(-1), when ignoring the pinning effect of precipitation on austenite growth. Whereas, if taking the pinning effect into consideration, the grain growth remains stable from 1,350 ℃, the calculated final sizes of austenite grains are 1.46, 1.02, 0.80, 0.67 and 0.57 mm, respectively. The sizes of final Ti(C,N) precipitates are 137, 79, 61, 51 and 43 nm, respectively, with the increase of cooling rate from 1 to 10 ℃·s^(-1). Model validation shows that the austenite size under different cooling rates coincided with the calculation results. Finally, the corresponding measures to strengthen cooling intensity at elevated temperature are proposed to improve the ductility and transverse crack of slab.

关键词： micro-alloyed steel Ti(C,N) precipitation austenite grain pinning effect

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Medium oxygen enriched blast furnace with top gas recycling strategy

引用

Journal of Iron and Steel Research International 2017年第8期24卷 778-786页

作者： Wei Zhang Zheng-liang Xue Ju-hua Zhang Wei Wang chang-gui cheng Zong-shu Zou The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina School of Metallurgy Northeastern UniversityShenyang 110004LiaoningChina

Top gas recycling oxygen blast furnace（TGR-OBF）process is a promising ironmaking *** biggest challenge of the TGR-OBF in operation is the dramatic decrease of top gas volume（per ton hot metal）,which once led to hanging-up and shutdowns in practice of the *** order to avoid this weakness,the strategy of medium oxygen blast furnace was *** maneuverable zone of the TGR-OBF was determined by the top gas volume,which should not be far from the data of the traditional blast *** deviation of ±12.5% was used,and then the maneuverable blast oxygen content is from 0.30 to 0.47 according to the *** flame temperature and the top gas volume have no much difference compared to those of the traditional blast *** minimum carbon consumption of 357 kg per ton hot metal in the maneuverable zone occurs at the oxygen content of 0.30（fuel saving of 14%）.In the unsteady evolution,the N2 accumulation could approach nearly zero after the recycling reached 6 *** far,some TGR-OBF industrial trials have been carried out in different countries,but the method of medium oxygen enriched TGR-OBF has not been implemented,because the accumulation of N2 was worried *** presented strategy of medium oxygen enriched TGR-OBF is applicable and the strategy with good operational performance is strongly suggested as a forerunner of the full oxygen blast furnace.

关键词： Oxygen blast furnace Top gas recycling Top gas volume Carbon consumption Operation Emission Optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical simulation of EMS position on flow, solidification and inclusion capture in slab continuous casting

引用

Journal of Iron and Steel Research International 2022年第11期29卷 1807-1822页

作者： Hai-biao Lu Yun-bo Zhong Zhong-ming Ren Wei-li Ren chang-gui cheng Zuo-sheng Lei State Key Laboratory of Advanced Special Steel and Shanghai Key Laboratory of Advanced Ferrometallurgy Shanghai UniversityShanghai 200444China The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina

Electromagnetic stirring(EMS)is a well-known and widely used technology for controlling the fluid flow in continuous casting mold,and therein the selection of stirrer position is closely related to final *** investigate the effect of stirrer position on initial solidification and inclusion capturing,a mathematical model coupling with electromagnetic field,turbulence flow,solidification,and inclusion movement was *** comparing the magnetic flux density,flow field and solidified shell thickness with measured data,the reliability of the mathematical model was *** uniform index has been introduced to judge the uniformity of solidified shell,and the washing effects of EMS on the numbers and distribution of captured inclusions were *** results show that a diagonal jet flow toward the mold wide face has generated when EMS is applied,and upper EMS position can effectively improve the uniformity of temperature and the solidified shell within the ***,due to the washing effect of EMS,the number of inclusions inside the solidified shell decreases,and the distribution of captured inclusions along the mold width changes *** the stirrer position,the uniform index decreases firstly and then increases,and the probability of inclusion capture by solidified shell ***,the upper stirrer position is suggested,with which the uniformity of solidified shell and cleanliness of slab are rational.

关键词： Slab continuous casting EMS position Flow Heat transfer Uniform index Solidified shell Inclusion capture

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical simulation on gas–liquid multiphase flow behavior under coupling effects of annular gas curtain and swirling flow at tundish upper nozzle

引用

Journal of Iron and Steel Research International 2024年第11期31卷 2693-2709页

作者： Xu-feng Qin chang-gui cheng Yang Li Wei-li Wu Hao Chen Chao-fa Zhao Yan Jin The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan430081HubeiChina

A three-dimensional mathematical model has been established for a novel metallurgy process coupling an annular gas curtain with swirling flow at tundish upper nozzle. The discrete phase model and volume of fluid model were applied to simulate the gas–liquid multiphase flow behavior in tundish and nozzle. The effect of argon flow rate on the migration behavior of bubbles and interface behavior between steel and slag was also investigated. The presented results indicate that the novel coupling process can significantly change the flow pattern in the stream zone of a tundish, prolong the average residence time of liquid steel, and reduce the dead fraction. A complete annular gas curtain is formed around the stopper rod of tundish. Under the action of drag force of liquid steel, a part of small bubbles enter the nozzle through the swirling grooves and gather toward the center of the nozzle by centripetal force. As the argon flow rate increases, the volume fraction of argon gas entering the nozzle increases, which enhances the swirl intensity and increases the concentration of bubbles in the nozzle. To avoid the formation of slag open eye in tundish, the argon flow rate should not exceed 8 L min−1.

关键词： Annular gas curtain Swirling flow Tundish upper nozzle Multiphase flow Numerical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

浅谈整机中的开关电源对电网的影响及有源校正技术

引用

淮阴工学院学报 2001年第5期10卷 12-13,53,55页

作者：左长贵成建生淮安信息职业技术学院江苏淮安223001

本文主要探讨直流开关稳压电源对市电的影响、原因、表现形式及解决方法—有源校正技术。

关键词：开关电源影响有源校正技术

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cerebral fat embolism following autologous fat injection in facial reconstruction:A case report

引用

World Journal of Clinical Cases 2025年第2期13卷 50-58页

作者： Xiu-Ying Chen Fa Shen chang cheng Yu-Han Wang Wen-Chao cheng De-Zhi Yuan Wen Huang Department of Neurology Chongqing Emergency Medical CenterChongqing University Central HospitalChongqing 400000China Department of Neurology Xinqiao HospitalThe Army Medical University(Third Military Medical University)Chongqing 400000China

BACKGROUND Autologous fat injection in facial reconstruction is a common cosmetic *** cerebral fat embolism(CFE)as a complication is rare,it carries serious health *** SUMMARY We present a case of a 29-year-old female patient who developed acute CFE following facial fat filling *** the surgery,the patient experienced symptoms including headache,nausea,vomiting,and difficulty breathing,which was followed by neurological symptoms such as slurred speech and left-sided *** physical examination and auxiliary investigations,including blood tests,head and neck computed tomography angiography,and cranial magnetic resonance diffusion-weighted imaging,were performed upon *** clinical diagnosis was acute cerebral embolism following facial fat filling *** included measures to improve cerebral circulation,dehydration for intracranial pressure reduction,nutritional support,and rehabilitation therapy for left limb *** patient showed a significant improvement in symptoms after 2 weeks of *** recovered left limb muscle strength to grade 5,had clear speech,and experienced complete relief of *** Our case highlights the potential occurrence of severe complications in patients undergoing fat injection in facial *** prevent these complications,plastic surgeons should enhance their professional knowledge and skills.

关键词： Cerebral fat embolism Mechanical thrombectomy Thrombolysis Steroid therapy Symptomatic treatment Case report

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fanlian Huazhuo formula:A promising therapeutic approach for metabolic associated steatotic liver disease

引用

World Journal of Gastroenterology 2025年第1期31卷 167-171页

作者： Chun-Han cheng Wen-Rui Hao Tzu-Hurng cheng Department of Medical Education Linkou Chang Gung Memorial HospitalTaoyuan 33305Taiwan Division of Cardiology Department of Internal MedicineShuang Ho HospitalMinistry of Health and WelfareTaipei Medical UniversityNew Taipei 23561Taiwan Division of Cardiology Department of Internal MedicineSchool of MedicineCollege of MedicineTaipei Medical UniversityTaipei 11002Taiwan Department of Biochemistry School of MedicineCollege of MedicineChina Medical UniversityTaichung 404328Taiwan

This article reviews the study,“Fanlian huazhuo formula alleviates high-fat-dietinduced nonalcoholic fatty liver disease by modulating autophagy and lipid synthesis signaling pathway”published in the World Journal of *** study explores the therapeutic potential of Fanlian Huazhuo formula(FLHZF)in treating metabolic-associated steatotic liver disease(MASLD),demonstrating that FLHZF reduces lipid accumulation,oxidative stress,and liver injury in MASLD models by modulating key signaling pathways involved in lipid metabolism and *** editorial emphasizes the potential of FLHZF as a treatment for MASLD and calls for further research to verify its clinical efficacy.

关键词： Fanlian Huazhuo formula Metabolic associated steatotic liver disease Autophagy Lipid metabolism Oxidative stress

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：