检索结果-南通市图书馆

Mechanical and damping performances of TPMS lattice metamaterials fabricated by laser powder bed fusion

China Foundry 2024年第4期21卷 327-333页

作者： Yan-peng Wei Huai-qian Li jing-jing Han Ying-chun Ma Hao-ran Zhou jing-chang cheng Jian Shi Zhi-quan Miao Bo Yu Feng Lin National Key Laboratory of Advanced Casting Technologies Shenyang Research Institute of Foundry Co.Ltd.CAMShenyang 110022China Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China Key Laboratory of Space Physics Beijing 100076China

Lattice metamaterials based on three-period minimum surface(TPMS)are an effective means to achieve lightweight and high-strength materials which are widely used in various fields such as aerospace and ***,its vibration and noise reduction,and damping properties have not been fully ***,in this study,the TPMS structures with parameterization were designed by the method of surface migration,and the TPMS structures with high forming quality was manufactured by laser powder bed fusion(LPBF).The mechanical properties and energy absorption characteristics of the beam and TPMS structures were studied and compared by quasi-static *** modal shapes of the beam lattice structures and TPMS structures were obtained by the free modal analysis,and the damping properties of two structures were obtained by modal *** the two structures after heat treatment with the same porosity of 70%,the yield strength of the beam lattice structure reaches 40.76 MPa,elastic modulus is 20.38 GPa,the energy absorption value is 32.23 MJ·m^(-3),the damping ratio is 0.52%.The yield strength,elastic modulus,energy absorption value,and damping ratio of the TPMS structure are 50.74 MPa,25.37 GPa,47.34 MJ·m^(-3),and 0.99%,*** results show that TPMS structures exhibit more excellent mechanical properties and energy absorption,better damping performance,and obvious advantages in structural load and vibration and noise reduction compared with the beam lattice structures under the same porosity.

关键词： lattice metamaterials TPMS energy absorption damping laser powder bed fusion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Room-temperature ferrimagnetism and size-modulated electronic structures in two-dimensional cluster-based metal-organic frameworks

引用

Science China Chemistry 2024年第4期67卷 1334-1340页

作者： jing cheng Xingxing Li Jinlong Yang Key Laboratory of Precision and Intelligent Chemistry University of Science and Technology of ChinaHefei 230026China Department of Chemical Physics University of Science and Technology of ChinaHefei 230026China Hefei National Research Center for Physical Sciences at the Microscale University of Science and Technology of ChinaHefei 230026China Hefei National Laboratory University of Science and Technology of ChinaHefei 230088China

Cluster-assembled materials have attracted particular attention for their complex hierarchical structures and unique ***,the majority of cluster-based assemblies developed so far are either non-magnetic or only exhibit magnetic ordering with a relatively low Curie temperature,limiting their applications in ***,two-dimensional(2D)cluster-assembled materials with room-temperature magnetism remain highly *** this purpose,based on first principles calculations,we design a series of thermodynamically stable 2D cluster-based metal-organic frameworks(MOFs)Fe_(n)-(pyz)(n=1-6)by utilizing Fenmetal clusters as nodes and nitrogen-containing pyrazine ligands as organic *** 2D cluster-based MOFs exhibit robust ferrimagnetic ordering due to the strong d-p direct exchange interaction between d-electron spin of Fe_(n)(n=1-6)clusters and charge transfer-induced p-electron spin of pyrazine *** particular,the ferrimagnetic Curie temperatures are well above room temperature(up to 836 K).Additionally,altering the size of Fe_(n)clusters in Fe_(n)-(pyz)(n=1-6)MOFs results in diverse functional spintronic properties,including bipolar magnetic semiconductors,half semiconductors and Dirac half ***,these 2D assembled MOFs possess sizable magnetic anisotropy energies,up to 9.16 me V per formula.

关键词： metal-organic framework two-dimensional material half metal bipolar magnetic semiconductor magnet

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhanced Crystallization of Poly(butylene adipate-co-terephthalate)by a Self-assembly Nucleating Agent

引用

Chinese Journal of Polymer Science 2024年第5期42卷 663-674,I0010页

作者： cheng Zhou Kun Chen Zi-Heng Zhang Meng-Fan jing Chun-Tai Liu chang-Yu Shen Ya-Ming Wang State Key Laboratory of Structural Analysis Optimization and CAE Software for Industrial EquipmentNational Engineering Research Center for Advanced Polymer Processing TechnologyZhengzhou UniversityZhengzhou450002China

Poly(butylene adipate-co-terephthalate)(PBAT)is a promising biodegradable flexible polymer but suffers from slow crystallization rate,making it less attractive for some applications like the injection-molded products in comparison with low-density polyethylene(LDPE).This work aimed to accelerate the crystallization of PBAT by adding a self-assembly nucleating agent octamethylenedicarboxylic dibenzoylhydrazide(OMBH).PBAT/OMBH composites with various OMBH contents(0 wt%,0.5 wt%,0.7 wt%,1 wt%,2 wt%,3 wt%and 5 wt%)were prepared through *** effect of OMBH on the crystallization behavior,morphologies and mechanical properties of PBAT was *** highest nucleation efficiency value of 59.6%was achieved for PBAT with 0.7 wt%OMBH,much higher than that of 22.7%for PBAT with 0.7 wt%*** force microscopy results showed that OMBH formed fine fibers and induced the formation of transcrystalline layers of *** transform infrared spectroscopy(FTIR)combined with two-dimensional correlation spectra suggested that the intermolecular dipole-dipole N—H…O=C interactions but not hydrogen bond between OMBH and PBAT promoted the crystallization of PBAT in the initial period of *** presence of OMBH did not change the crystal form of PBAT but had positive contribution in enhancing its crystallinity and mechanical *** work is essential for preparing PBAT with high crystallization rate,enhancing its potential applications in injection-molded products.

关键词： Poly(butylene adipate-co-terephthalate) Biodegradable Self-assembly nucleating agent Crystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Visual test paper based on Au/δ-MnO_(2) hollow nanosphere oxidase-like activity regulation using hexavalent chromium as a smart switch

引用

Rare Metals 2024年第2期43卷 711-722页

作者： Wen-chang Zhuang Hai-Yue Zhang Zhen-Yang Chen Wen-jing cheng Wei-Dan Na Zhao Li Lin Tian School of Materials and Chemical Engineering Xuzhou University of TechnologyXuzhou221018China School of Chemistry and Environmental Science Yili Normal UniversityYining835000China

Paper-based sensing platform is a point of need analytical toolkit for safety ***,the sensitivity,specificity,and simplicity are still ***,we report a novel strategy(Au/δ-MnO_(2) hollow nanosphere and 3,3′,5,5′-tetramethylbenzidine(TMB)induced test strips for signal-on detection)that can be utilized for hexavalent chromium(Cr^(6+))***,Cr^(6+)(CrO_(4)^(2−)) as a smart switch can remarkably enhance the oxidase-like activity of Au/δ-MnO_(2) hollow *** presence of Cr^(6+) can regulate the surface electronic redistribution of Au/δ-MnO_(2) and adjust the geometric configuration,which leads to the improvement in oxidase-like activity of Au/δ-MnO_(2).As a proof-of-concept application,a visual paper-based sensing platform of Cr^(6+) along with quantitative analysis by the test strips was successfully *** paper-based sensing platform exhibits a linear range with excellent selectivity for other interfering substances and lower limit of detection of 0.09μmol·L^(−1),providing a promising toolkit at-home Cr^(6+) measurement and environmental monitoring.

关键词： Point of need Colorimetric biosensing platform Au/δ-MnO_(2) hollow nanosphere Test strip Cr^(6+)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of CONTHAC-3D and hydrogen distribution analysis of HPR1000

引用

Nuclear Science and Techniques 2024年第2期35卷 210-221页

作者： Hui Wang jing-jing Li Yuan chang Gong-Lin Li Ming Ding China Nuclear Power Engineering Co.LTD. Beijing 100084China Fundamental Science on Nuclear Safety and Simulation Technology Laboratory Harbin 100049China

An in-house code,CONTHAC-3D,was developed to calculate and analyze thermal-hydraulic phenomena in containments during severe ***-3D is a three-dimensional computational fluid dynamics code that can be applied to predict gas flow,diffusion,and steam condensation in a containment during a severe hypothetical accident,as well as to obtain an estimate of the local hydrogen concentration in various zones of the ***-3D was developed using multiple models to simulate the features of the proprietary systems and equipment of HPR1000 and ACP100,such as the passive cooling system,passive autocatalytic recombiners and the passive air cooling *** validate CONTHAC-3D,a GX6 test was performed at the Battelle Model Containment *** hydrogen concentration and temperature monitored by the GX6 test are accurately predicted by ***,the hydrogen distribution in the HPR1000 containment during a severe accident was *** results show that the hydrogen removal rates calculated using CONTHAC-3D for different types of PARs agree well with the theoretical values,with an error of less than 1%.As the accident progresses,the hydrogen concentration in the lower compartment becomes higher than that in the large space,which implies that the lower compartment has a higher hydrogen risk than the dome and large space at a later stage of the *** amount of hydrogen removed by the PARs placed on the floor of the compartment is small;therefore,raising the installation height of these recombiners appropriately is ***,we do not recommend installing all autocatalytic recombiners at high *** study findings in regard to the hydrogen distribution in the HPR1000 containment indicate that CONTHAC-3D can be applied to the study of hydrogen risk containment.

关键词： Hydrogen risk mitigation Pressurized water reactor HPR1000 Thermal hydraulic CONTHAC-3D

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Graft-type Poly（N-isopropylacrylamide-co-acrylic acid） Microgels Exhibiting Rapid Thermo- and pH-responsive Properties

Graft-type Poly（N-isopropylacrylamide-co-acrylic acid） Mic...

引用

The 4th Joint China/Japan Chemical Engineering Symposium

作者： Jie Zhang1 Liang-Yin Chu1 2* chang-jing cheng1 Ming-Yu Zhou1 Xiao-Jie Ju1 1School of Chemical Engineering Sichuan University chengdu Sichuan 610065 China2Institute for Nanobiomedical Technology and Membrane Biology State Key Laboratory of Biotherapy Sichuan University chengdu Sichuan 610065 China

A novel graft-type poly（N-isopropylacrylamide-co-acrylic acid）（poly（NIPAM-co-AAc）） microgelwith linear grafted poly（NIPAM-co-AAc） side chains was prepared by incorporating the dualstimuli-responsive chains into conventional copolymerized poly（NIPAM-co-AAc） backbones as side chainsthrough a grafted modification of molecular structure. The grafted chains with unfettered ends can unfold andshrink freely in response to environmental stimuli. Due to the mobile nature and the tractive force of thegrafted poly（NIPAM-co-AAc） side chains, the prepared microgels were verified to have a synchronously rapidthermo- and pH-response property. When the environmental temperature was increased suddenly from 25°C toabout 63 °C, the graft-type microgels in ultrapure water deswelled at best 95% by volume within 40 secondsbut the normal-type microgels deswelled only 17% by volume within the same period. The analogous trendswere observed in either alkaline or acid buffered solutions. The graft-type microgels may thus be greatlypotential for use in many applications in which rapid responses to dual environmental stimuli are required.

关键词： graft copolymers microgels poly(N-isopropylacrylamide-co-acrylic acid) rapid response thermo-/pH- dual responsive polymer

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Tough Semi-interpenetrating Polyvinylpyrrolidone/Polyacrylamide Hydrogels Enabled by Bioinspired Hydrogen-bonding Induced Phase Separation

引用

Chinese Journal of Polymer Science 2024年第5期42卷 591-603,I0006页

作者： Qiong-Jun Xu Zhao-Yang Yuan chang-cheng Wang Hao Liang Yu Shi Hai-Tao Wu Hu Xu jing Zheng Jin-Rong Wu State Key Laboratory of Polymer Materials Engineering College of Polymer Science and EngineeringSichuan UniversityChengdu610065China

Semi-interpenetrating(semi-IPN)hydrogels formed by the continuous interpenetration of cross-linked polymer network and linear non-crosslinked polymer with multifunctionality are widely used in biomedical and other ***,the negative impact of linear polymer on the homogeneity of the cross-linked network often leads to a decrease in the mechanical properties of semi-IPN hydrogels and severely limits their ***,a bioinspired hydrogen-bonding induced phase separation strategy is presented to construct the tough semi-IPN polyvinylpyrrolidone/polyacrylamide hydrogels(named PVP/PAM hydrogels),including the linear polymer polyvinylpyrrolidone(PVP)and cross-linked polyacrylamide(PAM)*** resultant PVPx/PAM hydrogels exhibit unique phase separation induced by the hydrogen bonding between PVP and PAM and affected by the amount of substance of ***,the phase separation of PVPx/PAM hydrogels results in excellent mechanical properties with a strain of 2590%,tensile strength of 0.28 MPa and toughness of 2.17 MJ/m^(3).More importantly,the hydrogen bonding between PVP and PAM firstly disrupts to dissipate energy under external forces,so the PVPx/PAM hydrogels exhibit good self-recovery properties and outperform chemically cross-linked PAM hydrogels in impact resistance and damping *** is believed that the PVPx/PAM hydrogels with hydrogen-bonding induced phase separation possess more potential application prospects.

关键词： Tough Semi-interpenetrating networks Polyvinylpyrrolidone/polyacrylamide Hydrogels Phase separation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Resource utilization of drinking water treatment aluminum sludge in green cementing materials: Hydration characteristics and hydration kinetics

引用

Journal of Environmental Sciences 2024年第10期144卷 236-248页

作者： jing Yang cheng Chen Shuoyu Chen Yujie Ren Jinsuo Lu School of Environmental and Municipal Engineering Xi’an University of Architecture and TechnologyXi’an 710055China

As a byproduct of water treatment,drinking water treatment aluminum sludge(DWTAS)has challenges related to imperfect treatment and disposal,which has caused potential harm to human health and the *** this paper,heat treatment DWTAS as a supplement cementitious material was used to prepare a green cementing *** results show that the 800℃ is considered as the optimum heat treatment temperature for ***-800℃ is fully activated after thermal decomposition to form incompletely crystallized highly activeγ-Al2O3 and active SiO_(2).The addition of DWTAS promoted the formation of ettringite and C-(A)-S-H gel,which could make up for the low early compressive strength of cementing materials to a certain *** cured for 90 days,the compressive strength of the mortar with 30% DWTAS-800℃ reached 44.86 *** dynamic process was well simulated by Krstulovi′c-Dabi′c hydration kinetics *** study provided a methodology for the fabrication of environmentally friendly and cost-effective compound cementitiousmaterials and proposed a“waste-to-resource”strategy for the sustainable management of typical solid wastes.

关键词： Drinking water treatment aluminum sludge Green cementing material Hydration characteristics Hydration kinetics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Sustainable production of high-energy-density jet fuel via cycloaddition reactions

引用

Journal of Energy Chemistry 2024年第8期95卷 712-722,I0016页

作者： Yan-cheng Hu Yingying Zhao Ning Li jing-Pei Cao School of Chemical Engineering and Technology China University of Mining and TechnologyXuzhou 221116JiangsuChina School of Education Science Jiangsu Normal UniversityXuzhou 221116JiangsuChina CAS Key Laboratory of Science and Technology on Applied Catalysis Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023LiaoningChina

Developing an energy supply-chain based on renewable biomass holds great potential to build a low carbon ***-energy-density(HED)jet fuel,featuring unique fused/strained cycloalkanes,is of great significance for volume-limited military aircrafts,as their high density and combustion heat can extend flight duration and increase the ***,the exploration of biomass-based routes towards HED fuel has drawn much attention over the past *** reaction features rapid construction of various carbocycles in an atom-and step-economical *** elegant strategy has been widely applied in the manufacture of sustainable HED *** we carefully summarize the progress achieved in this fascinating area and the review is categorized by the cycloaddition patterns including[4+2],[2+2],[4+4],and[2+1]***,the energy densities of the as-prepared biofuels and petroleumbased fuels(conventional Jet-A and advanced JP-10)are also *** review will provide important insights into rational design of new HED fuel with different ring-types/sizes and inspire the chemists to turn those literature studies into practical applications in military field.

关键词： High-energy-density fuel Biomass-based chemicals Cycloaddition Cycloalkanes Catalysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation of Flower-like Copper Foam Supported Co_(3)O_(4) Electrocatalyst and Its Hydrogen Evolution Performance

引用

Journal of Wuhan University of Technology(Materials Science) 2024年第2期39卷 327-331页

作者：李兆 cheng Julong WANG Yanan WU Kunyao CAO jing School of Materials Engineering Xi’an Aeronautical InstituteXian 710077China

Flower-like copper foam Co_(3)O_(4) catalysts(Co_(3)O_(4)/CF) were prepared by hydrothermal *** crystalline structure and microscopic morphology of the prepared samples were characterized by using X-ray diffractometer(XRD) and scanning electron microscope(SEM),and the electrochemical properties were investigated by an electrochemical *** experimental results show that the Co_(3)O_(4) catalysts are successfully prepared on the foamed copper support by hydrothermal method,and the material’s morphology is mainly flower *** the current density is 10 mA·cm^(-2),the overpotential value of the Co_(3)O_(4)/CF catalyst is 141 mV,lower than that of blank *** electrochemical impedance(EIS) spectrum shows that the R_(ct )value of the Co_(3)O_(4)/CF catalyst decreases,and the Coulomb curves of double-layer show that the electrochemically active area of the Co_(3)O_(4)/CF catalyst efficiently increases compared with that of the blank ***,the as-obtained Co_(3)O_(4)/CF catalyst exhibits a good hydrogen evolution rate,showing great applicability potential in the catalytic electrolysis of water for hydrogen production.

关键词： Co_(3)O_(4)/CF composite structure electrocatalysis hydrogen evolution reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：