检索结果-南通市图书馆

Ballistic design and testing of a composite armour reinforced by CNTs suitable for armoured vehicles

Defence Technology（防务技术） 2024年第2期32卷 173-195页

作者： Evangelos ch.Tsirogiannis Evangelos Daskalakis mohamed H.Hassan Abdalla m.Omar Paulo Bartolo EODH SA Research and Development DepartmentLakkoma Chalkidikis63080Greece School of mechanical Aerospace and Civil EngineeringUniversity of ManchesterManchesterM139PLUK Singapore Centre for 3D Printing School of Mechanical and Aerospace EngineeringNanyang Technological University639798Singapore

This paper is investigating the use of composite armour reinforced by nanomaterials, for the protection of light armoured(LAV) and medium armoured military vehicles(mAV), and the interaction between the composite materials and high-performance ballistic projectiles. Four armour materials, consisted of front hybrid fibre reinforced polymer cover layer, ceramic strike-face, fibre reinforced polymer intermediate layer and the metal matrix composite reinforced backplate, were manufactured and assembled by adhesive technology. The proposed laminated protection system is suitable for armoured ground vehicles;however, it could be used as armour on ground, air and naval platforms. The design of the protection system, including.m.terial selection and thickness, was elaborated depending on the performance requirements of Level 4 + STANAg 4569 military standard(projectile 14.5 mm × 114 mm API B32) and especially on a design philosophy which is analysed with the specifications. The backplate of this new composite is a hybrid material of metal matrix Composite(mmC) reinforced with carbon nanotubes(CNTs), manufactured with the use of powder metallurgy technique. The composite backplate material was morphologically, mechanically and chemically analysed. Results show that all plates are presenting high mechanical properties and ballistic characteristics, compared to commonly used armour plates. Real military ballistic tests according to AEP-STANAg 4569 were carried out for the total composite armour systems. After the ballistic tests, AA2024-CNT3 showed the best protection results, compared with the other plates(AA2024-CNT1 and AA2024-CNT2), with the projectile being unable to fully penetrate the composite plate.

关键词： Passive armour protection Protective armour Ballistic performance Hybrid composites Vehicle protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Solid-liquid extraction for yttrium recovery using porous polymeric resin(XAD-7) functionalized with D_(2)EHPA

引用

Journal of Rare Earths 2024年第9期42卷 1764-1773,I0005页

作者： P.A.martínez-montoya R.g.Sanchez-Alvarado D.Y.medina-Velazquez m.L.Carrera-Jota P.garnica-chávez A.de J.morales-Ramirez Higher School of chemical Engineering and Extractive Industries ESIQIEIPNDepartment of Metallurgical EngineeringUPALM S/NCol.LindavistaGustavo A.Madero Cd.de MéxicoC.P07738Mexico metropolitan Autonomous University Department of MaterialsBasic Sciences and EngineeringAv.San Pablo No.180Col.Reynosa TamaulipasCd.de MéxicoC.P02200Mexico Center for Research and Technological Innovation CIITECIPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P02250CDMXMexico

The recovery of yttrium is proposed by applying a solid-liquid extraction process using di-2-ethyl hexylphosphoric acid(D2EHPA) as extracting *** extracting agents were supported on a macro porous polymeric resin XAD-7(solid phase).Yttrium ions extraction and discharge tests were performed,firstly from a synthetic aqueous solution of 100 mg/L Y(liquid phase) at 25℃ with *** effects of pH of aqueous solutions bearing yttrium,volume fraction of extracting agents and the solid/liquid(S/L)ratio on the yttrium recovery were *** most favorable conditions for yttrium ions extraction are;20 vol% D_(2)EHPA functionalized resin,pH=1.5 and an S/L ratio of 10 mg.m. The discharge of yttrium ions was done under the same conditions of extraction stage,using a 2 mol/L [H_(2)SO_(4)] as stripping *** to 80% yttrium is extracted,while 75% yttrium is recovered in the striping *** all experiments,the reaction equilibrium is reached after 20 min,and the kinetics for the extraction stage was determined as a second-order ***,experiments were carried out to discharge the yttriumloaded resins,and it has been determined that the best pH value to strip the Y ions is *** tests of extraction and discharge for yttrium ions show that the functionalized resin can work at least five cycles without decreasing its ***,the proposed process was tested in a real solution with Y ions fro m a waste fluorescent la mp powder leached in H_(2)SO_(4),demonstrating the ability to effectively recover yttrium,separating it from various metals from the studied residue.

关键词： Yttrium recovery Rare earth solid-liquid extraction XAD-7 resin Fluorescent lamps recycling Solid-liquid kinetics extraction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

magnesium oxide(mgO)nanoadsorbents in wastewater treatment:A comprehensive review

引用

Journal of magnesium and Alloys 2024年第5期12卷 1709-1773页

作者： H.C.S.Perera V.gurunanthanan Anoop Singh m.m.m.g.P.g.m.ntilaka g.Das Sandeep Arya Department of Physics Khalifa UniversityAbu Dhabi12788United Arab Emirates Postgraduate Institute of Science University of PeradeniyaPeradeniyaSri Lanka Department of Humanities and Sciences Guru Nanak Institutions Technical CampusIbrahimpatnamHyderabad501506India Centre for global Health Research Saveetha Medical College and HospitalsSaveetha Institute of Medical and Technical SciencesChennai602105Tamil NaduIndia Department of Physics University of JammuJammu and Kashmir180006India

Wastewater contamination by heavy metals and synthetic dyes presents a significant environmental challenge,necessitating effective and sustainable separation *** review article provides a detailed examination of magnesium oxide(mgO)nanoparticles as an innovative nanoadsorbent for wastewater treatment,with a specific focus on heavy metal and dye *** review comprehensively explores various aspects of mgO nanoparticles,including their structural characteristics and synthesis *** article delves into the morphology and crystallographic arrang.m.nt of mgO nanoparticles,offering insights into their structural *** the complexity of adsorption processes,the review identifies and analyzes parameters influencing the adsorption efficiency of mgO nanoparticles,such as temperature,pH,contact time,initial concentration,and co-existing *** interplay between these parameters and the adsorption capability of mgO nanoparticles emphasizes the importance of optimizing operational ***,the review assesses various synthesis methods for mgO nanoparticles,including sol-gel,hydrothermal,precipitation,green synthesis,solvothermal,and template-assisted *** discusses the advantages,limitations,and resulting nanoparticle characteristics of each method,enabling readers to grasp the implications of synthesis processes on adsorption *** comprehensive review consolidates current insights into the effectiveness of mgO nanoparticles as a potent nanoadsorbent for removing heavy metals and dyes from wastewater covering a wide spectrum of aspects related to mgO ***,there is a need to investigate the use of mgO in the treatment of actual wastewater or river water,in order to leverage its cost-effectiveness and high efficiency for practical water treatment applications in real-time.

关键词： mgO nanoparticles Nanoadsorbent Wastewater treatment Heavy metals Dye separation Adsorption Synthesis methods

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Control system design for a pressure-tube-type supercritical water-cooled nuclear reactor via a higher order sliding.m.de method

引用

Nuclear Science and Techniques 2024年第1期35卷 145-154页

作者： m.Hajipour g.R.Ansarifar Department of Nuclear Engineering Faculty of PhysicsUniversity of IsfahanIsfahan 81746-73441Iran

Nuclear power plants exhibit non-linear and time-variable ***,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor(SCWR)is a fourth-generation conceptual *** an SCWR,the non-linear dynamics of the reactor require a controller capable of control-ling the *** this study,a pressure-tube-type SCWR was controlled during reactor power maneuvering with a higher order sliding.m.de,and the reactor outgoing steam temperature and pressure were controlled *** an SCWR,the temperature,pressure,and power must be maintained at a setpoint(desired value)during power *** point kinetics equations with three groups of delayed neutrons were used in the ***-order and classic sliding.m.de controllers were separately manufactured to control the plant and were compared with the PI controllers speci-fied in previous *** controlled parameters were reactor power,steam temperature,and ***,for these parameters,the PI controller had certain instabilities in the presence of *** classic sliding.m.de controller had a higher accuracy and stability;however its main drawback was the chattering *** was highly accurate and stable and had a small computational *** reality,it followed the desired values without oscillations and chattering.

关键词： Supercritical water nuclear reactor Higher order sliding.m.de controller Steam temperature Steam pressure Point kinetics model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Olefin Polymerization Behavior of Titanium(IV) Complexes with Fluorinated and Non-fluorinated Aliphatic Phenoxyimine Ligands

引用

chinese Journal of Polymer Science 2024年第1期42卷 52-62,I0007页

作者： Vladislav A.Tuskaev Kasim F.mag.m.dov Svetlana ch.gagieva Dmitry A.Kurmaev Yulia V.Nelyubina Evgenii K.golubev maria D.Evseeva Viktor g.Vasil'ev galina g.Nikiforova mikhail I.Buzin Vyacheslav S.Bogdanov Boris m.Bulychev Department of chemistry M.V.Lomonosov Moscow State UniversityMoscow 119992Russian Federation A.N.Nesmeyanov Institute of Organoelement Compounds Russian Academy of SciencesMoscow119991Russian Federation Enikolopov Institute of Synthetic Polymer materials Russian Academy of SciencesMoscow 117393Russian Federation

A series of Ti(Ⅳ) dichloride and dialkoxide com plexes with phenoxyimine ligands containing fluorinated and nonfluorinated aliphatic imine fragments have been *** molecular structures of complexes 1 and 4 were established by single-crystal X-ray diffraction *** complexes adopt a distorted octahedral coordination structure around the titanium atom and two oxygen atoms are situated in trans position while two nitrogen atoms and two outgoing ligands(Cl or iPrO) are situated in cis *** of activators(mmAO-12 and combinations Et_nAICl_(3-n)+Bu_(2)mg) and outgoing ligand(Cl or iPrO) nature on the catalytic activity and properties of the resulting polymers was *** Ti complexes,despite the nature of the outgoing ligands(Cl or iPrO) in the presence of Al/mg activators,was found to display a high ethylene polymerization activity in the range 1600-3830 kg_(polymer)·mol_(Ti)^(-1)·h^(-1)·atm^(-1) with a viscosity average molecular weight(m_v) value in the range 1.1×10~6-7.1×10~6 Dalton(Da).The resulting UHmWPE can be processed by a solventless method into high-strength and high-modulus oriented *** rheological characteristics of a polymer melt have been *** absence of a cross-over point did not allow to compare the values of the molecular weight distribution of polymers obtained on fluorinated and non-fluorinated pre-catalysts,however,the estimation of the entanglement density is in good agreement with the mechanical characteristics of oriented film *** activation with methylalumoxane,the activity of the com plexes decreased very significantly;however,a polymer with a molecular weight of about 12 million Da was *** the process of ethylene/octene-1 copolymerization,fluorine-containing precatalysts showed a clear advantage over non-fluorinated analogues both in activity and in comonomer content.

关键词： FI catalysts Titanium(IV) (Co)polymerization Al/mg co-catalyst Ultra-high molecular weight polyethylene

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Investigation of the transformation of organic matter of carbonate deposits of the Semiluksky-mendymsky horizon under hydrothermal conditions

引用

Petroleum 2024年第2期10卷 216-223页

作者： S.m.Petrov A.I.Lakhova E.g.m.iseeva A.g.Safiulina Institute of Petroleum Chemistry and NanotechnologiesKazan National Research Technological UniversityKazan420015Russia Institute of geology and Oil and gas Technologies Kazan Federal UniversityKazan420008Russia

The paper presents the results of studies on the transformation of the organic matter of siliceous-clayey carbonate rocks of the Semiluksko-mendymsky horizon of the Romashkino oil field in a hydrothermal fluid for an hour(with a water-to-rock ratio of 33)at 340℃and 380℃and pressu res of 17 and 20 *** a result of hydrothermal treatment,at 340℃and 17 mPa,based on nitrogen porosimetry and electron microscopy data,transformations of rock-forming.m.nerals in the rock are *** lead to an increase in the volume and average diameter of mesopores in it and the formation of micropores,as well,which improve its filtration *** the same time,the amount of kerogen in the composition of the organic matter decreases and the yield of the petroleum hydrocarbon extract increases,in which,according to the SARA analysis,the content of asphaltenes increases and the content of resins,aromatic and saturated hydrocarbons *** the composition of aroatic hydrocarbons,the proportion of a lkyltri methyl benzenes and dibenzothiophenes increases,phenanthrene homologues appear,and in the composition of saturated hydrocarbons,the amount of iso-structure alkanes decreases relative to the content of linear *** the temperature and pressure of the hydrothermal fluid to 380℃and 20 mPa increases the degree of kerogen conversion from 12.4%to 23.6%.At the same time,changes occurring in the component composition of petroleum hydrocarbon extracts remains similar to the experiments carried out at 340℃and 17 mPa;the content of naphthalenes decreases,the content of dibenzothiophenes increases and C_(11)-C_(17),C_(19)-C_(22)alkyltrimethylbenzenes *** to IR spectroscopy,with increasing temperature and pressure of the hydrothermal fluid the intensity of the absorption bands of the aromatic ring,aliphatic fragments,and oxygen-containing groups increases in resins;the structural-group composition of asphaltenes changes little:aromaticity and the content of conde

关键词： Carbonate deposits Organic matter Hydrothermal fluid mobile hydrocarbons

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Automatic Rule Discovery for Data Transformation Using Fusion of Diversified Feature Formats

引用

Computers, materials & Continua 2024年第7期80卷 695-713页

作者： g.Sunil Santhosh Kumar m.Rudra Kumar Department of CSE Jawaharlal Nehru Technological UniversityAnantapur515002India Department of CSE Marri Laxman Reddy Institute of Technology and ManagementHyderabad500043India Department of Information Technology Mahatma Gandhi Institute of TechnologyHyderabad500075India

This article presents an innovative approach to automatic rule discovery for data transformation tasks leveraging XgBoost,a machine learning algorithm renowned for its efficiency and *** framework proposed herein utilizes the fusion of diversified feature formats,specifically,metadata,textual,and pattern *** goal is to enhance the system’s ability to discern and generalize transformation rules fromsource to destination formats in varied ***,the article delves into the methodology for extracting these distinct features from raw data and the pre-processing steps undertaken to prepare the data for the *** sections expound on the mechanism of feature optimization using Recursive Feature Elimination(RFE)with linear regression,aiming to retain the most contributive features and eliminate redundant or less significant *** core of the research revolves around the deployment of the XgBoostmodel for training,using the prepared and optimized feature *** article presents a detailed overview of the mathematical model and algorithmic steps behind this ***,the process of rule discovery(prediction phase)by the trained XgBoost model is explained,underscoring its role in real-time,automated data *** employingmachine learning and particularly,the XgBoost model in the context of Business Rule Engine(BRE)data transformation,the article underscores a paradigm shift towardsmore scalable,efficient,and less human-dependent data transformation *** research opens doors for further exploration into automated rule discovery systems and their applications in various sectors.

关键词： XgBoost business rule engine machine learning categorical query language humanitarian computing environment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Influence of curing conditions on the shrinkage behavior of three-dimensional printed concrete formwork

引用

Frontiers of Structural and Civil Engineering 2024年第8期18卷 1225-1236页

作者： m.BEKAERT K.van TITTELBOOm g.de SchUTTER magnel-Vandepitte Laboratory for structural Engineering and Building.m.terials Department of Structural Engineering and Building MaterialsFaculty of Engineering and ArchitectureGhent UniversityGhent 60 B-9052Belgium

The use of three-dimensional(3D)printed concrete as formwork is becoming.m.re widely applied within the ***,the technology is still not optimized and there are many reports of preliminary cracking during the curing of cast *** is believed to result from differential shrinkage between the printed and cast *** cracks(in the printed concrete or at the interface between the infill and printed concrete)form a preferential path for aggressive substances and can reduce the durability of the combined concrete *** ensure the desired service life of the structure,it is important that the differential shrinkage between cast and printed concrete is *** study investigated the effect of curing conditions on the differential shrinkage behavior of 3D and cast *** influence of prewetting of the dry-cured 3D printed formwork was also *** the experimental program,a vibrated and self-compacting concrete were used as cast *** 3D printed formwork was produced and combined with cast concrete to simulate a concrete *** formwork was cured for 1,7,or 28 d exposed to the air(relative humidity:60%or 95%)or submerged in *** length change of the combined elements was observed over 56 d after concrete casting and throughout the thickness of the *** show that increasing the curing period in dry conditions of the printed concrete leads to an expansion of the formwork on the first day after *** expansion leads to a non-uniform strain evolution throughout the curing period of the combined *** concrete formwork stored in wet conditions does not expand after the casting process but tends to show a decreasing linear deformation within the whole elements.

关键词： 3D concrete printing formwork shrinkage curing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

引用

Applied mathematics and mechanics(English Edition) 2024年第1期45卷 197-216页

作者： C.g.PAVITHRA B.J.gIREESHA m.L.KEERTHI Department of Pg Studies and Research in mathematics Kuvempu UniversityShankaraghatta 577451India Department of mathematics and Statistics M.S.Ramaiah University of Applied SciencesBengaluru 560058India

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTm) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

关键词： convection radiation moving longitudinal fin Adomian decomposition Sumudu transform method(ADSTm) trihybrid nanofluid magnetic field

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pressurized environments directly influence friction and wear of dry steel contacts—Investigations in a novel high fluid pressure tribometer

引用

Friction 2024年第7期12卷 1599-1617页

作者： Paul REIchLE Jakob BARZ georg UmLAUF günter E.m.TOVAR Institute of Interfacial Process Engineering and Plasma Technology(IgVP) University of StuttgartStuttgart 70569Germany Fraunhofer Institute for Interfacial Engineering and Biotechnology(IgB) Stuttgart 70569Germany

To reduce the usage of classical lubricants in deep drawing,a new tribological system based on volatile lubricants was ***,a volatile medium is injected under high pressure into the interstice between drawing tool and sheet *** on temperature and pressure,the temporary lubricant may exist in its gaseous or liquid *** this study,a novel high fluid pressure tribometer was designed to investigate the friction and wear of dry steel contacts under comparable conditions like in dry deep ***,a new ball-on-disc tribometer was designed and integrated into a high-pressure *** specifically investigate the effects of different environments(technical air,liquid and gaseous carbon dioxide,nitrogen,argon)at atmospheric and high pressure(0.1 mPa,6 mPa)on tribology,the specimens and all components were operating *** the experiments,the friction was measured *** show that the highest friction occurs in air and the lowest in carbon dioxide *** to the experiments,the wear of the specimens was assessed along with changes in surface chemistry related to tribochemical ***,the tribology of the dry sliding contacts is correlated to changes of the surface *** differences as well as similarities regarding the different fluid environments are *** the results show,the differences between the media used are most pronounced at elevated ***,this work gives clear indications on the suitability of volatile lubricants in dry friction or rather gas lubrication,especially for dry deep drawing.

关键词： dry friction and dry wear gas lubrication carbon dioxide tribo-layer dry metal forming

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：