检索结果-南通市图书馆

Chinese Journal of Aeronautics 2024年第2期37卷 524-540页

作者： Xuan cui Rui ZHAO Min WAN School of Mechanical Engineering and Automation Beihang UniversityBeijing 100191China Jiangxi Research Institute of Beihang University Jiangxi 330000China

Electrically Assisted Forming(EAF)technology has obvious advantages in material *** develop an effective constitutive model considering electrical effects,room temperature and electrically assisted quasi-static uniaxial tensile tests were conducted using ultrathin nickelbased superalloy plates with a thickness of 0.25 *** research focused on the two most widely recognized effects:the Joule thermal and the electric athermal *** mechanism of current action can be divided into two scenarios:one considering the Joule thermal effect only,and the other considering both effects *** basic constitutive models,namely the Modified-Hollomon model and the Johnson-Cook(J-C)model,were selected to be optimized through the classification of two different situations,and four optimized constitutive models were *** was found that the J-C model with simultaneous consideration of the Joule thermal effect and electric athermal effect had the best prediction effect by comparing the results of these four ***,the accuracy of the optimization model was verified by finite element simulation of the electrically assisted stretching optimization *** results show that the constitutive model can effectively predict the temperature effect caused by the Joule heat effect and the athermal effect of current on the material.

关键词： Joule heating Elastoplasticity Plastic deformation Superalloys Constitutive models

Activity regulation and applications of metal-organic framework-based nanozymes

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 900-914页

作者： Ge Fang Shou-Xin Bao Gen-Xiu Zhou cui-cui Ge State Key Laboratory of Radiation Medicine and Protection School of Radiation Medicine and ProtectionSchool for Radiological and Interdisciplinary Sciences(RAD-X)Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education InstitutionsSoochow UniversitySuzhou 215123China Suzhou Nanomicro Technology Co. LtdSuzhou 215000China

As a new generation of artificial enzymes,nanozymes show outstanding advantages such as high stability,low cost,and facile synthesis,which endow them with promising applications in biomedical and environmental *** the various reported nanozymes,metal-organic frameworks(MOFs)could mimic the active center of natural enzymes and provide a hydrophobic environment,which makes MOFs attractive alternatives to natural *** to the highly structural diversity and tailorability of MOFs,rational design will contribute to improve the activity of MOF-based nanozymes and promote their potential applications in both biomedical and environmental ***,a comprehensiye suminary of activity regulatory strategies of MOF-based nanozymes is urgently ***,we summarized the activity regulatory strategies of MOFs with intrinsic enzyme-like activities via modulation of metal nodes,ligands,structures and *** the applications of MOF-based nanozymes in biosensing,hazardous degradation,antibacterial,and cancer therapy were also ***,the current challenges and future perspectives were discussed in *** is highly expected that this review will provide a better understanding on the rational design of novel high-performance MOF-based nanozymes.

关键词： Metal-organic frameworks(MOF)-based nanozymes Activity regulation Biosensing Cancer therapy Hazardous degradation Antibacterial

Process in laser drilling of deep microholes without taper on metal materials

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第1期67卷 37-59页

作者： FAN RunZe MEI XueSong cui JianLei State Key Laboratory for Manufacturing Systems Engineering Xi’an Jiaotong UniversityXi’an 710054China

Deep microhole machining is currently a prominent research area within the aerospace field,encompassing blade film cooling and fuel injection control ***,taper defects in metal materials may lead to performance degradation or even structural damage over a component’s *** and helical drilling,facilitated by ultrashort pulse lasers,have proven more suitable for achieving high-precision,deep holes in metal ***,excessive repetition rates can also result in severe thermal *** methods are commonly employed for controlling taper,including parameter optimization,assistance,and secondary *** laser beam drilling is widely utilized and has been integrated into relevant machining systems for commercial *** deep microholes include film cooling holes and injection *** drilling is a potential machining method for new materials in the aerospace *** laser drilling processing has been studied,numerous related scientific challenges and technical difficulties must be addressed before practical implementation.

关键词： aerospace laser drilling deep microhole taper control

Topological and superconducting properties of monolayered CoN and CoP:A first-principles comparative study

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第5期67卷 98-108页

作者： Jiaqing Gao Zhenyu Zhang Ping cui International Center for Quantum Design of Functional Materials(ICQD) Hefei National Research Center for Physical Sciences at Microscale(HFNL)University of Science and Technology of ChinaHefei 230026China Hefei National Laboratory University of Science and Technology of ChinaHefei 230088China

Two-dimensional systems that simultaneously harbor superconductivity and nontrivial band topology may serve as appealing platforms for realizing topological superconductivity with promising applications in fault-tolerant quantum ***,based on first-principles calculations,we show that monolayered Co N and Co P with the isovalent Fe Se-like structure are stable in freestanding form,even though their known bulk phases have no resemblance to *** two systems are further revealed to display intrinsic band inversions due to crystal field splitting,and such orderings are preserved with the inclusion of spin-orbit coupling(SOC),which otherwise is able to open a curved band gap,yielding a non-zero Z2 topological invariant in each *** a mechanism of topologicalization is distinctly contrasted with that identified recently for the closely related monolayers of CoX(X=As,Sb,Bi),where the SOC plays an indispensable role in causing a nontrivial band ***,we demonstrate that,by applying equi-biaxial tensile strain,the electron-phonon coupling strength in monolayered CoN can be significantly enhanced,yielding a superconducting transition temperature(Tc)up to 7-12 K for the Coulomb pseudopotential ofμ*=0.2-0.1,while the CoP monolayer shows very low Tc even under pronounced *** different superconducting behaviors can be attributed to different variations in lattice softening and electronic density of states around the Fermi level upon *** central findings enrich the understanding of different mechanisms of band inversions and topologicalization and offer platforms for achieving the coexistence of superconductivity and nontrivial band topology based on two-dimensional systems.

关键词： topological yielding otherwise

Ultrafast micro/nano-manufacturing of metastable materials for energy

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第4期11卷 283-298页

作者： Xiaoya cui Yanchang Liu Yanan Chen School of Materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology(Ministry of Education) and Tianjin Key Laboratory of Composite and Functional MaterialsTianjin University Ministry of Education Key Laboratory of Protein Sciences School of Life SciencesTsinghua University

The structural engineering of metastable nanomaterials with abundant defects has attracted much attention in energy-related fields. The high-temperature shock(HTS) technique, as a rapidly developing and advanced synthesis strategy, offers significant potential for the rational design and fabrication of high-quality nanocatalysts in an ultrafast, scalable, controllable and eco-friendly way. In this review, we provide an overview of various metastable micro-and nanomaterials synthesized via HTS, including single metallic and bimetallic nanostructures, high entropy alloys, metal compounds(e.g. metal oxides) and carbon nanomaterials. Note that HTS provides a new research dimension for nanostructures, i.e. kinetic modulation. Furthermore, we summarize the application of HTS—as supporting films for transmission electron microscopy grids—in the structural engineering of 2D materials, which is vital for the direct imaging of metastable materials. Finally, we discuss the potential future applications of high-throughput and liquid-phase HTS strategies for non-equilibrium micro/nano-manufacturing beyond energy-related *** is believed that this emerging research field will bring new opportunities to the development of nanoscience and nanotechnology in both fundamental and practical aspects.

关键词： high-temperature shock technique defect engineering metastable phase kinetic modulation non-equilibrium micro/nano-manufacturing

Analytical model for predicting time-dependent lateral deformation of geosynthetics-reinforced soil walls with modular block facing

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 711-725页

作者： Luqiang Ding Chengzhi Xiao Feilong cui School of Civil and Transportation Engineering Hebei University of TechnologyTianjin300401China

To date,few models are available in the literature to consider the creep behavior of geosynthetics when predicting the lateral deformation(d)of geosynthetics-reinforced soil(GRS)retaining *** this study,a general hyperbolic creep model was first introduced to describe the long-term deformation of geosynthetics,which is a function of elapsed time and two empirical parameters a and *** conventional creep tests with three different tensile loads(Pr)were conducted on two uniaxial geogrids to determine their creep behavior,as well as the a-Pr and b-Pr *** test results show that increasing Pr accelerates the development of creep deformation for both ***,a and b respectively show exponential and negatively linear relationships with Pr,which were confirmed by abundant experimental data available in other *** on the above creep model and relationships,an accurate and reliable analytical model was then proposed for predicting the time-dependent d of GRS walls with modular block facing,which was further validated using a relevant numerical investigation from the previous *** evaluation and comparison of the proposed model with six available prediction models were *** a parametric study was carried out to evaluate the effects of wall height,vertical spacing of geogrids,unit weight and internal friction angle of backfills,and factor of safety against pullout on d at the end of construction and 5 years *** findings show that the creep effect not only promotes d but also raises the elevation of the maximum d along the wall ***,the limitations and application prospects of the proposed model were discussed and analyzed.

关键词： Geosynthetics Creep behavior Geosynthetics-reinforced soil(GRS)walls Lateral deformation Analytical model

Fault diagnosis of a marine power-generation diesel engine based on the Gramian angular field and a convolutional neural network

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第6期25卷 470-482页

作者： Congyue LI Yihuai HU Jiawei JIANG Dexin cui Merchant Marine College Shanghai Maritime UniversityShanghai 201306China School of Mechanical and Energy Engineering Shanghai Technical Institute of Electronics&InformationShanghai 201411China

Marine power-generation diesel engines operate in harsh *** vibration signals are highly complex and the feature information exhibits a non-linear *** is difficult to extract effective feature information from the network model,resulting in low fault-diagnosis *** address this problem,we propose a fault-diagnosis method that combines the Gramian angular field(GAF)with a convolutional neural network(CNN).Firstly,the vibration signals are transformed into 2D images by taking advantage of the GAF,which preserves the temporal *** raw signals can be mapped to 2D image features such as texture and *** integrate the feature information,the images of the Gramian angular summation field(GASF)and Gramian angular difference field(GADF)are fused by the weighted average fusion ***,the channel attention mechanism and temporal attention mechanism are introduced in the CNN model to optimize the CNN learning *** the concept of residuals in the attention mechanism improves the feasibility of ***,the weighted average fused images are fed into the CNN for feature extraction and fault *** validity of the proposed method is verified by experiments with abnormal valve *** average diagnostic accuracy is 98.40%.When−20 dB≤signal-to-noise ratio(SNR)≤20 dB,the diagnostic accuracy of the proposed method is higher than 94.00%.The proposed method has superior diagnostic ***,it has a certain anti-noise capability and variable-load adaptive capability.

关键词： Multi-attention mechanisms(MAM) Convolutional neural network(CNN) Gramian angular field(GAF) Image fusion Marine power-generation diesel engine Fault diagnosis

OIP5 Interacts with NCK2 to Mediate Human Spermatogonial Stem Cell Self-Renewal and Apoptosis through Cell Cyclins and Cycle Progression and Its Abnormality Is Correlated with Male Infertility

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research 2024年第1期2023卷 455-469页

作者： Yinghong cui Wei Chen Li Du Zuping He The Key Laboratory of Model Animals and Stem Cell Biology in Hunan Province The Research Center of Reproduction and Translational Medicine of Hunan ProvinceHunan Normal University School of MedicineChangsha 410013HunanChina

Spermatogonial stem cells(SSCs)have important applications in both reproduction and regenerative ***,specific genes and signaling transduction pathways in mediating fate decisions of human SSCs remain ***,we have demonstrated for the first time that OIP5(Opa interacting protein 5)controlled the self-renewal and apoptosis of human *** sequencing identified that NCK2 was a target for OIP5 in human SSCs,and interestingly,OIP5 could interact with NCK2 as shown by Co-IP(co-immunoprecipitation),IP-MS(mass spectrometry),and GST pulldown ***2 silencing decreased human SSC proliferation and DNA synthesis but enhanced their ***,NCK2 knockdown reversed the influence of OIP5 overexpression on human ***,OIP5 inhibition decreased the numbers of human SSCs at S and G2/M phases,while the levels of numerous cell cycle proteins,including cyclins A2,B1,D1,E1 and H,especially cyclin D1,were remarkably ***,whole-exome sequencing of 777 patients with nonobstructive azoospermia(NOA)revealed 54 singlenucleotide polymorphism mutations of the OIP5 gene(6.95%),while the level of OIP5 protein was obviously lower in testes of NOA patients compared to fertile ***,these results implicate that OIP5 interacts with NCK2 to modulate human SSC self-renewal and apoptosis via cell cyclins and cell cycle progression and that its mutation and/or lower expression is correlated with *** such,this study offers novel insights into molecular mechanisms underlying the fate determinations of human SSCs and the pathogenesis of NOA,and it provides new targets for treating male infertility.

关键词： OIP5 Apoptosis reversed

Vibration harmonic suppression technology for electromagnetic vibrators based on an improved sensorless feedback control method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Information Technology & Electronic Engineering 2024年第3期25卷 472-483页

作者： Wei LI Junning cui Xingyuan BIAN Limin ZOU Centerof Ultra-precision Optoelectronic Instrument Engineering Harbin Institute of TechnoogyHarbin 0080China Key Lab of Ultra-precision Intlligent Instrumentation(Harbin Institute of Technology).Ministry of Industry and Information Technology Harbin 150080China

To realize low harmonic distortion of the vibration waveform output from electromagnetic vibrators,we propose a vibration harmonic suppression technology based on an improved sensorless feedback control *** changing the original driving circuit,the alternating current(AC)equivalent resistance of the driving coil is used to obtain high-precision vibration velocity information,and then a simple and reliable velocity feedback control system is *** the study of the effect of different values of key parameters on the system,we have achieved an effective expansion of the velocity characteristic frequency band of low-frequency vibration,resulting in an enhanced harmonic suppression capability of velocity feedback *** present extensive experiments to prove the effectiveness of the proposed method and make comparisons with conventional control *** the frequency range of 0.01-1.00 Hz,without using any sensors,the method proposed in this study can reduce the harmonic distortion of the vibration waveform by about 40%compared to open-loop control and by about 20%compared to a conventional sensorless feedback control method.

关键词： Vibration calibration Electromagnetic vibrators Harmonic suppression Sensorless control method Velocity feedback control

Progress on the glassy-crystal laminates:From design,microstructure to deformation and future solutions

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第5期172卷 113-144页

作者： Yu Chen Ronggao cui Jun Shen Gang Wang College of Mechatronics and Control Engineering Shenzhen UniversityShenzhen 518060China College of Physics and Optoelectronic Engineering Shenzhen UniversityShenzhen 518060China Department of Motor Design Business Weichai New Energy Technology Co.Ltd.Weifang 261061China Guangdong Key Laboratory of Electromagnetic Control and Intelligent Robots Shenzhen UniversityShenzhen 518060China Laboratory for Microstructures Institute of MaterialsShanghai UniversityShanghai 200444China

The development of new design strategies to create innovative structural materials,refine existing ones,and achieves compatible combinations of strength and plasticity remains a worldwide *** alloys,such as shape memory alloys(SMAs),bulk metallic glasses(BMGs),high entropy alloys(HEAs),and heterogeneous pure metals such as Cu,have excellent mechanical responses,but they still fall short of meeting all the requirements of structural materials due to specific flaws,such as lack of tensile de-formation for BMGs and low yielding strength for *** address these shortcomings,proposals such as integrating glassy matrices and crystallized alloys,such as HEAs/SMAs,have been ***,these solutions have unresolved issues,such as the challenging control of B2 phase formation in BMG ***,glass-crystal(A/C)laminated alloys with alternating layers have been reported to exhibit improved mechanical properties and activated work-hardening behaviors,but they still face press-ing issues such as bonding interfaces and unknown deformation *** review focuses on design routes such as the selection of alloy components and processing techniques,exploration of micro-structural evolution and deformation modes with an increase in strain,and future solutions to address pressing and unsolved *** prominent advantages include diversified deformation mechanisms,such as deformation twinning,martensitic phase transformation,and precipitation hardening,as well as tuned interactive reactions of shear bands(SBs)near the A/C ***,this review provides a promising pathway to design and develop structural materials in the materials field community.

关键词： Glassy-crystal laminates Bulk metallic glasses High entropy alloys Shape memory alloys Microstructure Deformation mechanisms Future solutions