检索结果-南通市图书馆

Progress on Bionic Textured Cutting Tools:A Review and Prospects

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第1期21卷 19-55页

作者： Hong Wei Guangjun chen Zhuang chen Zhiwei Yu Jiashuai Huang Tianjin Key Laboratory of High Speed Cutting and Precision Processing Tianjin 300222China School of Mechanical Engineering Tianjin University of Technology and EducationTianjin 300222China

Cutting tools are known as the“productivity”of the manufacturing industry,which affects the production efficiency and quality of the workpiece,and has become the focus of research and attention in academia and ***,traditional cutting tools often suffer from adhesion or wear during the cutting process,which considerably reduces the cutting efficiency and service life of the tools,and makes it difficult to meet current production *** solve the above problems,scholars have introduced bionics into the tool’s design,applying the microscopic structure of the biological surface to the tool surface to alleviate the tool’s *** paper mainly summarizes the research progress of bionic textured cutting ***,categorize whether the bionic texture design is inspired by a single organism or multiple ***,it is discussed that the non-smooth surface of the biological surface has five characteristics:hydrophilic lubricity,wear resistance,drag reduction and hydrophobicity,anti-adhesion,and arrangement,and the non-smooth structure of these different characteristics are applied to the surface of the tool is designed with bionic ***,the cutting performance of bionic textured cutting tools is *** anti-friction and wear-resisting mechanism of bionic textured cutting tools is ***,some pending problems and perspectives have been proposed to provide new inspirations for the design of bionic textured cutting tools.

关键词： Bionic textured cutting tools Biological microstructure characteristics Cutting performance Anti-friction and wear-resisting mechanism

Heat Transfer Characteristics of a Microchannel Heat Sink with Highly-Dense Micro-Jet Arrays

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1148-1160页

作者： ZHANG Yu chen Xiaoyan MIAO Lin chen Liang HOU Yu State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049China Beijing Aerospace Technology Institute Beijing100083China

This paper proposed a new structure of highly-dense micro-jet arrays for hybrid jet-impingement/microchannel heat sinks(~120 jet per cm^(2) with jet width of 0.35 mm).Parametric study is performed to investigate the influence of structure and flow parameters on the convective heat transfer of water jet cooling in confined *** simulation results show that the optimal jet width,jet spacing and impingement distance are around 0.2 mm,0.2 mm and 0.3 mm,respectively,which can achieve a low thermal resistance as well as a relatively low pressure *** analysis of the heat transfer pathways shows that the micro-fin jet structures can extend the impinging heat transfer area and conduct a considerable proportion of heat,which can reach up to 38.9%with the Reynolds number ranging from 797.1 to *** heat transfer characteristics in the heat sink will shift from impingement dominated heat transfer to the channel-convection dominated heat transfer as the jet impingement distance increases.A correlation is proposed to predict the average Nusselt number on the stagnation area for the heat sink with different structure parameters,and the deviations of predictions from the numerical results are less than 10%.

关键词： hybrid heat sink impingement microchannel thermal management high heat flux

Numerical simulation on the multiphase flow and reoxidation of the molten steel in a two-strand tundish during ladle change

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1540-1553页

作者： Jingcheng Wang Zhentong Liu Wei chen Hongliang chen Lifeng Zhang School of Mechanical Engineering Yanshan UniversityQinhuangdao 066004China School of Materials Science and Engineering Tianjin UniversityTianjin 300350China School of Mechanical and Materials Engineering North China University of TechnologyBeijing 100144China

A 3D mathematical model was proposed to investigate the molten steel–slag–air multiphase flow in a two-strand slab continuous casting(CC)tundish during ladle *** study focused on the exposure of the molten steel and the subsequent reoxidation *** exposure of the molten steel was calculated using the coupled realizable k–εmodel and volume of fluid(VOF)*** diffusion of dissolved oxygen was determined by solving the user-defined scalar(UDS)***,the user-defined function(UDF)was used to describe the source term in the UDS equation and determine the oxidation rate and oxidation *** effect of the refilling speed on the molten steel exposure and dissolved oxygen content was also *** the refilling speed during ladle change reduced the refilling time and the exposure duration of the molten ***,the elevated refilling speed enlarged the slag eyes and increased the average dissolved oxygen content within the tundish,thereby exacerbating the reoxidation *** addition,the time required for the molten steel with a high dissolved oxygen content to exit the tundish varied with the refilling *** the inlet speed was 3.0 m·s^(-1)during ladle change,the molten steel with a high dissolved oxygen content exited the outlet in a short period,reaching a maximum dissolved oxygen content of 0.000525wt%.Conversely,when the inlet speed was 1.8 m·s^(-1),the maximum dissolved oxygen content was 0.000382wt%.The refilling speed during the ladle change process must be appropriately decreased to minimize reoxidation effects and enhance the steel product quality.

关键词： tundish ladle change reoxidation multiphase flow numerical simulation

Effect of carbon material and surfactant on ink property and resulting surface cracks of fuel-cell microporous layers

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第5期69卷 1-12页

作者： Zhekun chen Weitong Pan Longfei Tang Xueli chen Fuchen Wang Engineering Research Center of Resource Utilization of Carbon-containing Waste with Carbon Neutrality Ministry of EducationEast China University of Science and TechnologyShanghai 200237China Key Laboratory of Pressure Systems and Safety Ministry of EducationEast China University of Science and TechnologyShanghai 200237China

Ensuring the consistency of electrode structure in proton-exchange-membrane fuel cells is highly desired yet challenging because of wide-existing and unguided cracks in the microporous layer(MPL). The first thing is to evaluate the homogeneity of MPL with cracks quantitatively. This paper proposes the homogeneity index of a full-scale MPL with an area of 50 cm~2, which is yet to be reported in the literature to our knowledge. Besides, the effects of the carbon material and surfactant on the ink and resulting MPL structure have been studied. The ink with a high network development degree produces an MPL with low crack density, but the ink with high PDI produces an MPL with low crack homogeneity. The polarity of the surfactant and the non-polarity of polytetrafluoroethylene(PTFE) are not mutually soluble,resulting in the heterogeneous PTFE distribution. The findings of this study provide guidelines for MPL fabrication.

关键词： Proton-exchange-membrane fuel cell Microporous layer Crack density Crack homogeneity Polytetrafluoroethylene distribution Surfactant

Dynamics and vibration reduction performance of asymmetric tristable nonlinear energy sink

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第3期45卷 389-406页

作者： Hongyan chen Youcheng ZENG Hu DING Siukai LAI Liqun chen School of Mechanical Engineering University of Science and Technology BeijingBeijing 100083China Shanghai Key Laboratory of Mechanics in Energy Engineering Shanghai Frontier Science Center of MechanoinformaticsShanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200444China Department of Civil and Environmental Engineering The Hong Kong Polytechnic UniversityKowloonHong KongChina

With its complex nonlinear dynamic behavior,the tristable system has shown excellent performance in areas such as energy harvesting and vibration suppression,and has attracted a lot of *** this paper,an asymmetric tristable design is proposed to improve the vibration suppression efficiency of nonlinear energy sinks(NESs)for the first *** proposed asymmetric tristable NES(ATNES)is composed of a pair of oblique springs and a vertical ***,the three stable states,symmetric and asymmetric,can be achieved by the adjustment of the distance and stiffness asymmetry of the oblique *** governing equations of a linear oscillator(LO)coupled with the ATNES are *** approximate analytical solution to the coupled system is obtained by the harmonic balance method(HBM)and verified *** vibration suppression efficiency of three types of ATNES is *** results show that the asymmetric design can improve the efficiency of vibration reduction through comparing the chaotic motion of the NES oscillator between asymmetric steady *** addition,compared with the symmetrical tristable NES(TNES),the ATNES can effectively control smaller structural *** other words,the ATNES can effectively solve the threshold problem of TNES failure to weak ***,this paper reveals the vibration reduction mechanism of the ATNES,and provides a pathway to expand the effective excitation amplitude range of the NES.

关键词： asymmetric nonlinear energy sink(NES) tristable vibration control po-tential barrier

Microstructure Evolution and Mechanical Properties of Friction Stir Welded Al-Cu-Li Alloy

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 855-871页

作者： Peng chen Wenhao chen Jiaxin chen Zhiyu chen Yang Tang Ge Liu Bensheng Huang Zhiqing Zhang School of New Energy and Materials Southwest Petroleum UniversityChengdu 610500China Sichuan Provincial Engineering Research Center of Advanced Materials Manufacturing Technology for Shale Gas High-Efficient Exploitation Southwest Petroleum UniversityChengdu 610500China College of Materials Science and Engineering Chongqing UniversityChongqing 400045China School of Mechatronic Engineering Southwest Petroleum UniversityChengdu 610500China School of Robot Engineering Yangtze Normal UniversityChongqing 408100China

The investigation concentrates on friction stir welded(FSW)Al-Cu-Li alloy concerning its local microstructural evolution and mechanical *** grain features were characterized by electron back scattered diffraction(EBSD)technology,while precipitate characterization was conducted by using transmission electron microscopy(TEM)aligned along[011]Al and[001]Al zone *** mechanical properties are evaluated through micro-hardness and tensile *** can be found that nugget zones exhibit finely equiaxed grains evolved through complete dynamic recrystallization(DRX),primarily occurring in continuous dynamic recrystallization(CDRX)and discontinuous dynamic recrystallization(DDRX).In the thermal-mechanically affected zone(TMAZ),numerous sub-structured grains,exhibiting an elongated morphology,were created due to partial DRX,signifying the dominance of CDRX,DDRX,and geometric dynamic recrystallization(GDRX)in this region.T_(1)completely dissolves in the nugget zone(NZ)leading to the formation of Guinier-Preston zones and increase ofδ′,β′and S′.Conversely,T_(1)partially solubilizes in TMAZ,the lowest hardness zone(LHZ)and heat affected zone(HAZ),and the residual T_(1)undergoes marked coarsening,revealing various T_(1)*** solubilization and coarsening of T_(1)are primary contributors to the degradation of hardness and strength.θ′primarily dissolves and coarsens in NZ and TMAZ,whilst this precipitate largely coarsens in HAZ and LHZ.σ,TB,grain boundary phases(GBPs)and precipitate-free zone(PFZ)are newly generated during FSW.σexists in the TMAZ,LHZ and HAZ,whereas TB nucleates in *** and PFZ mostly develop in LHZ and HAZ,which can cause strain localization during tensile deformation,potentially leading to LHZ joint fracture.

关键词： Al-Cu-Li alloy Friction stir welding Microstructure evolution Mechanical properties

Global optimization of double protograph LDPC codes for JSCC scheme

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 455-456页

作者： Qiwang chen chen chen Yu-cheng HE Zhiping XU Xiamen Key Laboratory of Mobile Multimedia Communications College of Information Science and EngineeringHuaqiao University Key Laboratory of Underwater Acoustic Communication and Marine Information Technology (Xiamen University) Ministry of Education School of Ocean Information Engineering Jimei University

A double low-density parity-check (D-LDPC) coding system was proposed in[1]as a typical joint source-channel coding(JSCC) scheme[1–5].In this system,two LDPC coding matrices perform source and channel coding,*** important concept in a D-LDPC coding system is the introduction of a linking matrix between the check nodes (CNs)of the source coding matrix and the variable nodes (VNs) of the channel LDPC coding matrix.

关键词： JOINT SOURCE DESIGN

Progress and prospects of Mg-based amorphous alloys in azo dye wastewater treatment

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 873-889页

作者： Yanan chen Fengchun chen Liang Li chen Su Bo Song Hongju Zhang Shengfeng Guo Fusheng Pan School of Materials and Energy Southwest UniversityChongqing 400715China Analytical and Testing Center Southwest UniversityChongqing 400715China College of Materials Science and Engineering Chongqing UniversityChongqing 400044China

Mg-based amorphous alloys exhibit efficient catalytic performance and excellent biocompatibility with a promising application probability,specifically in the field of azo dye wastewater ***,the problems like difficulty in preparation and poor cycling stability need to be *** present,Mg-based amorphous alloys applied in wastewater degradation are available in powder and *** amorphous alloy powder fabricated by ball milling has a high specific surface area,and its reactivity is thousands of times better than that of gas atomized alloy *** the development is limited due to the high energy consumption,difficult and costly process of powder *** single roller melt-spinning method is a new manufacturing process of amorphous alloy *** to amorphous powder,the specific surface area of amorphous ribbon is relatively lower,therefore,it is necessary to carry out surface modification to enhance *** is a way that can form a pore structure on the surface of the amorphous alloys,increasing the specific surface area and providing more reactive sites,which all contribute to the catalytic *** the optimal conditions for Mg-based amorphous alloys in wastewater degradation by adjusting amorphous alloy composition,choosing suitable method to preparation and surface modification,reducing cost,expanding the pH range will advance the steps to put Mg-based amorphous alloys in industrial environments into practice.

关键词： Mg-based amorphous alloys Azo dyes Dealloying Surface modification Wastewater degradation.

A two-step multi-frequency receiver function inversion method for shallow crustal S-wave velocity structure and its application across the basin-mountain range belts in Northeast China

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第3期67卷 687-703页

作者： Ruihao YANG Xu WANG Ling chen Mingye FENG Qifu chen State Key Laboratory of Lithospheric Evolution Institute of Geology and GeophysicsChinese Academy of SciencesBeijing 100029China College of Earth and Planetary Sciences University of Chinese Academy of SciencesBeijing 100049China Key Laboratory of Earth and Planetary Physics Institute of Geology and GeophysicsChinese Academy of SciencesBeijing 100029China

A shallow crustal velocity structure(above 10 km depth) is essential for understanding the crustal structures and deformation and assessing the exploration prospect of natural resources, and also provides priori information for imaging deeper crustal and mantle structure. Passive-source seismic methods are cost-effective and advantageous for regional-scale imaging of shallow crustal structures compared to active-source methods. Among these passive methods, techniques utilizing receiver function waveforms and/or body-wave amplitude ratios have recently gained prominence due to their relatively high spatial resolution. However, in basin regions, reverberations caused by near-surface unconsolidated sedimentary layers often introduce strong non-uniqueness and uncertainty, limiting the applicability of such methods. To address these challenges, we propose a two-step inversion method that uses multi-frequency P-RF waveforms and P-RF horizontal-to-vertical amplitude ratios. Synthetic tests indicate that our two-step inversion method can mitigate the non-uniqueness of the inversion and enhance the stability of the results. Applying this method to teleseismic data from a linear seismic array across the sedimentary basins in Northeast China, we obtain a high-resolution image of the shallow crustal S-wave velocity structure along the array. Our results reveal significant differences between the basins and mountains. The identification of low-velocity anomalies(<2.8 km s^(-1)) at depths less than 1.0 km beneath the Erlian Basin and less than 2.5 km beneath the Songliao Basin suggests the existence of sedimentary layers. Moreover, the high-velocity anomalies(~3.4–3.8 km s^(-1)) occurring at depths greater than 7 km in the Songliao Basin may reflect mafic intrusions emplaced during the Early Cretaceous. Velocity anomaly distribution in our imaging result is consistent with the location of the major faults, uplifts, and sedimentary depressions, as well as active-source seismic res

关键词： Receiver function Frequency dependence Two-step inversion Shallow crustal velocity structures Unconsolidated sedimentary basins