检索结果-南通市图书馆

Oligomeric donor with appropriate crystallinity for organic solar cells

Chinese Chemical Letters 2024年第2期35卷 289-294页

作者： Kaiming Yang Min Lv Yanhong chang Kun Lu Zhixiang Wei CAS Key Laboratory of Nanosystem and Hierarchical Fabrication CAS Center for Excellence in NanoscienceNational Center for Nanoscience and TechnologyBeijing 100190China University of Chinese Academy of Sciences Beijing 100049China Department of Environmental Science and Engineering University of Science and Technology BeijingBeijing 100083China Beijing Key Laboratory of Resource Treatment of Typical Industrial Pollutants Beijing 100083China

Improving the performance of all-small-molecule organic solar cells(ASM-OSCs)largely depends on the design and application of novel donors with appropriate *** molecular conjugation is an effective method for regulating molecular stacking and *** this work,we successfully designed and synthesized two novel acceptor-donor-donor-donor-acceptor(A-D-D-D-A)type oligomeric donors with three dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b']dithiophene(DTBDT)as the central unit,named as 3DTBDT-Cl and 3DTBDT,depending on with and without chlorine substitution on the thiophene side *** found that the introduction of chlorine atoms makes the blend films display stronger crystallinity but with large-scale phase separation morphology and more defects,which eventually leads to a power conversion efficiency(PCE)of only 10.83%,whereas the blend films based 3DTBDT with appropriate crystallinity achieved 13.74%*** with 3DTBDT-Cl/L8-BO,the 3DTBDT/L8-BO films exhibited a nanoscale bi-continuous interpenetrating network morphology with a smaller domain size and more suitable crystallinity,which guarantees the corresponding devices obtained more efficient exciton dissociation,efficient charge transport,reduced bimolecular recombination,and performed more balanced carrier *** results demonstrated that regulating the crystallinity of oligomeric donors to obtain the desired phase separation morphology in the blend films could facilitate further improving the performance of ASM-OSCs.

关键词： Linked donor unit Oligomeric donors Crystallinity regulation Organic solar cells

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Curcumin Interferes with TGF-β1-Induced Fibrosis in NRK-49F Cells by Reversing ADAMTS18 Gene Methylation

引用

Chinese Journal of Integrative Medicine 2024年第7期30卷 600-607页

作者： XU Ben ZHANG Jia-en YE Lin YUAN chang-wei Department of Urology Peking University First Hospital and Institute of UrologyPeking UniversityNational Urological Cancer CenterBeijing100034China

Objective To explore the molecular mechanism by which curcumin affects renal interstitial fibrosis(RIF)progression by regulating ADAM metallopeptidase with thrombospondin type 1 motif 18(ADAMTS18)*** NRK-49F cells RIF model were induced with transforming growth factorβ1(TGF-β1).Effects of different concentrations of curcumin(0,10,20,and 30μmol/L)on cell proliferation,cell cycle,cell apoptosis as well as cyclin D1 expression were analyzed by cell counting kit-8,flow cytometry and Western blot,***18 methylation levels were determined by methylation-specific polymerase chain ***18,fibronectin(FN),type I collagen(Col-I)and alpha-smooth muscle actin(α-SMA)mRNA and protein expressions were analyzed by real-time PCR(RT-PCR)and Western blot,***,cells were treated with 50 mmol/L 5-aza-2′-deoxycytidine(5-aza-dC,demethylation agent)for 72 *** of curcumin on extracellular matrix(ECM)deposition was evaluated by immunochemical staining and Western ***-49F cells were transfected with ADAMTS18 small interfering RNA and grouped into a normal control,ADAMTS18-knock-out(KO),and ADAMTS18-KO+30μmol/L curcumin groups,and whether curcumin can reverse the effect of ADAMTS18 knockdown on RIF was *** Compared with the control group,TGF-β1 significantly inhibited the proliferation of NRK-49F cells,blocked the G1/G0 phase,promoted cell apoptosis and inhibited cyclin D1 expression(P<0.01).Among the different concentrations of curcumin,30μmol/L curcumin significantly reversed these processes(P<0.01).Immunochemical staining and Western blot results showed that curcumin significantly inhibited the deposition of FN,Col-I andα-SMA(P<0.01).Curcumin and 5-zaz-dC had synergistic effects,promoting ADAMTS18 expression,removing ADAMTS18 methylation,and reducing ECM ***18 knockdown promoted ECM accumulation,and curcumin reversed this process(P<0.01).Conclusion TGF-β1-induced fibrosis in NRK-49F ***

关键词： renal fibrosis curcumin Chinese medicine ADAMTS18 methylation modification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research on the generation method of seawater sound velocity model based on Perlin noise

引用

Acta Oceanologica Sinica 2024年第1期43卷 99-111页

作者： Zhimiao chang Fuxing Han Zhangqing Sun Zhenghui Gao Xueqiu Wang College of Geoexploration Science and Technology Jilin UniversityChangchun 130026China

In the processing of conventional marine seismic data,seawater is often assumed to have a constant velocity ***,due to static pressure,temperature difference and other factors,random disturbances may often frequently in seawater *** impact of such disturbances on data processing results is a topic of theoretical *** seawater sound velocity is a difficult physical quantity to measure,there is a need for a method that can generate models conforming to seawater *** article will combine the Munk model and Perlin noise to propose a two-dimensional dynamic seawater sound velocity model generation method,a method that can generate a dynamic,continuous,random seawater sound velocity model with some regularity at large ***,the paper discusses the influence of the inhomogeneity characteristics of seawater on wave field propagation and *** results show that the seawater sound velocity model with random disturbance will have a significant influence on the wave field simulation and imaging results.

关键词： Munk model Perlin noise seawater inhomogeneity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent developments in selective laser processes for wearable devices

引用

Bio-Design and Manufacturing 2024年第4期7卷 517-547页

作者： Youngchan Kim Eunseung Hwang chang Kai Kaichen Xu Heng Pan Sukjoon Hong Optical Nanoprocessing Lab Department of Mechanical EngineeringBK21 FOUR ERICA-ACE CenterHanyang University55 Hanyangdaehak-RoSangnok-GuAnsan 15588Republic of Korea Multiscale Manufacturing Lab J.Mike Walker’66 Department of Mechanical EngineeringTexas A&M UniversityCollege StationTX 77843USA State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310058China

Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication *** have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of *** this review,recent developments in relevant laser processes are summarized under two separate ***,transformative approaches,such as for laser-induced graphene,are *** addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic *** addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new ***,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy *** addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

关键词： Selective laser process Wearable device Transformative approach Laser-induced graphene Ablation Sintering Synthesis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of CONTHAC-3D and hydrogen distribution analysis of HPR1000

引用

Nuclear Science and Techniques 2024年第2期35卷 210-221页

作者： Hui Wang Jing-Jing Li Yuan chang Gong-Lin Li Ming Ding China Nuclear Power Engineering Co.LTD. Beijing 100084China Fundamental Science on Nuclear Safety and Simulation Technology Laboratory Harbin 100049China

An in-house code,CONTHAC-3D,was developed to calculate and analyze thermal-hydraulic phenomena in containments during severe ***-3D is a three-dimensional computational fluid dynamics code that can be applied to predict gas flow,diffusion,and steam condensation in a containment during a severe hypothetical accident,as well as to obtain an estimate of the local hydrogen concentration in various zones of the ***-3D was developed using multiple models to simulate the features of the proprietary systems and equipment of HPR1000 and ACP100,such as the passive cooling system,passive autocatalytic recombiners and the passive air cooling *** validate CONTHAC-3D,a GX6 test was performed at the Battelle Model Containment *** hydrogen concentration and temperature monitored by the GX6 test are accurately predicted by ***,the hydrogen distribution in the HPR1000 containment during a severe accident was *** results show that the hydrogen removal rates calculated using CONTHAC-3D for different types of PARs agree well with the theoretical values,with an error of less than 1%.As the accident progresses,the hydrogen concentration in the lower compartment becomes higher than that in the large space,which implies that the lower compartment has a higher hydrogen risk than the dome and large space at a later stage of the *** amount of hydrogen removed by the PARs placed on the floor of the compartment is small;therefore,raising the installation height of these recombiners appropriately is ***,we do not recommend installing all autocatalytic recombiners at high *** study findings in regard to the hydrogen distribution in the HPR1000 containment indicate that CONTHAC-3D can be applied to the study of hydrogen risk containment.

关键词： Hydrogen risk mitigation Pressurized water reactor HPR1000 Thermal hydraulic CONTHAC-3D

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Loading capacity and emulsification phenomena of HREE extraction by dialkylphosphinic acids with different β,γ,δ-substituents

引用

Journal of Rare Earths 2024年第1期42卷 191-199,I0007页

作者： Junlian Wang Guodong Xu Wen Xu Jianguo Cui Yufu Chen Ziyong chang School of Civil and Resource Engineering University of Science and Technology BeijingBeijing100083China Key Laboratory of Ministry of Education for Efficient Mining and Safety of Metal Mines Beijing100083China State Key Laboratory of Baiyunobo Rare Earth Resource Researches and Comprehensive Utilization Baotou Research Institute of Rare EarthsBaotou014030China

The relationship between dialkylphosphinic acid structure and their loading capacity for HREEs and emulsification phenomena has rarely been *** this paper,we took Lu extraction as an example to study the effect of β,γ,δ-substituents of dialkylphosphinic acids on their loading capacity and anti-emulsification performance for *** discuss conveniently,the dialkylphosphinic acids were classified into two groups:β-substituent group(P208,INET-1,P218,USTB-1 and P227)and γ,δ-substituent group(P218,P2132 and Cyanex 272).For β-substituent group extractants,their loading capacities are in the order P208(299.7 mg/L)≈INET-1(299.5 mg/L)>P218(270.8 mg/L)>>USTB-1(163.1 mg/L)>P227(151.4 mg/L),while their anti-emulsification/gelation performances are just in the opposite order P227>USTB-1>P218>P208≈INET-1 under the studied *** γ,δ-substituent group extractants,their loading capacities are in the order P218(270.8 mg/L)>P2132(192.3 mg/L)>Cyanex272(131.7 mg/L),while the anti-emulsification performance of P218 is better than those of P2132 and Cyanex *** loading capacity data given in the parentheses are obtained through repeatedly extracting Lu from ~4×10^(-4)mol/L of Lu aqueous feed solution with initial pH of 2.40 by 0.01 mol/L extractant at phase ratio A/O of 1:1.

关键词： Heavy rare earth element Dialkylphosphinic acid Extraction Loading capacity Emulsification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cross-linkedα-amylase aggregates on Fe3O4 magnetic nanoparticles modified with polydopamine/polyethyleneimine for efficient hydrolysis of starch

引用

Particuology 2024年第7期90卷 98-105页

作者： Jiandong Cui Xiuming Tang Qingqing Ma Yuyan chang Qunli Zhang Shiru Jia State Key Laboratory of Food Nutrition and Safety Laboratory of Industrial Fermentation MicrobiologyMinistry of EducationTianjin University of Science and TechnologyTianjin 300457China Key Laboratory of Biomass Chemical Engineering of Ministry of Education Zhejiang UniversityHangzhou 310027China

In this workα-amylase was immobilized on magnetic Fe3O4 nanoparticles with polyethylenimine(PEI)/polydopamine(PDA)coating or 3-aminopropyl triethoxysilane(APTES)for the first time via adsorption–precipitation–*** with the freeα-amylase,the resultant magnetic cross-linkedα-amylase aggregates(PEI/PDA-M-CLEAs and N-M-CLEAs)exhibited excellent thermal and storage stability as well as pH *** storage at 25°C for 60 days,freeα-amylase only retained 60%of its initial activity,while PEI/PDA-M-CLEAs and N-M-CLEAs retained 80%and 78%of their initial activities,***,N-M-CLEAs and PEI/PDA-M-CLEAs showed good *** 6 repeated uses,PEI/PDA-M-CLEAs and N-M-CLEAs still maintained 65%and 62%of their initial activities,***,PEI/PDA-M-CLEAs and N-M-CLEAs exhibited higher starch hydrolysis efficiency than freeα-*** maximum dextrose equivalent(DE)values of starch hydrolysis by PEI/PDA-M-CLEAs and N-M-CLEAs reached 29.24%and 28.79%within 90 min,***,the maximum DE values of starch hydrolysis by the freeα-amylase was only 27.89%even in 150 *** magnetic cross-linkedα-amylase aggregates could be introduced as effective biocatalyst for industrial applications in production of maltose syrups.

关键词： α-amylase Magnetic nanoparticles Functional modification Magnetic cross-linked enzyme aggregates Hydrolysis of starch

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Broadband absorption performance of 3D-printed polyetheretherketone-based electromagnetic wave-absorbing composites

引用

Chinese Journal of Aeronautics 2024年第8期37卷 547-558页

作者： Lin BAI Nan chang Meiying ZHAO Chi HOU Yi CAO Dichen LI School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Chengdu Aircraft Design and Research Institute Chengdu 610091China Xi’an Key Laboratory of Advanced Structure Design and Application of Aircraft Northwestern Polytechnical UniversityXi’an 710072China State Key Laboratory for Manufacturing System Engineering Xi’an Jiaotong UniversityXi’an 710054China

The rapid development of additive manufacturing technology has offered a new avenue for designing and fabricating high wave-absorbing meta *** this study,the mechanical properties and broadband absorption performance of Poly-Ether-Ether-Ketone(PEEK)–based electromagnetic wave–absorbing composite materials was *** high-performance polymer PEEK was used as the matrix,and the materials with electromagnetic wave loss,such as reduced graphene oxide,Carbonyl Iron(CI),and Flake CI(FCI),were used as *** on the theory of impedance matching,a wave-absorbing structure with a gradual impedance gradient was designed and *** test results showed that at the 2.0–18.0 GHz frequency band,the coverage rate of the effective absorption bandwidth was up to 72.0%,the average optimal reflectivity was–18.09 dB,and the wide-angle absorption range was 0°–30°.The advantages of additive manufacturing technology in designing and fabricating wave-absorbing structures are presented,demonstrating that the technology is an effective method for creating broadband absorbing structures.

关键词： Absorption performance Additive manufacturing Electromagnetic absorption PEEK composite materials Gradual structure Broadband absorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stage separation of recoverable liquid launch vehicle by using moving pulsating ball analogue for propellant sloshing

引用

Chinese Journal of Aeronautics 2024年第2期37卷 360-370页

作者： Yu LU Baozeng YUE Bailong HAO Bole MA Feng LIU Yuanyuan chang School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Astronautical Systems Engineering Beijing 100076China

In the process of stage separation of recoverable liquid launch vehicles,because of the large amount of residual fuel in the storage tanks,the influence of liquid sloshing on separation safety must be *** calculation simplicity and operation practicability,the Moving Pulsating Ball Model(MPBM)of large amplitude liquid sloshing is introduced into the calculation of launch vehicle stage *** the dynamic equation of the model with the energy relationship during"breathing movement",the formula calculating the force of liquid on the rigid body is *** with the calculations of commercial CFD calculation software,the accuracy of MPBM model is ***,all the external forces and moments are applied to the rigid body of the stages,so that the translational and rotational dynamic equations of the stages are obtained *** to the relative position of the two stages,the geometric shape of the interstage section and the engine of the second stage,the minimum clearance in the separation process can be decided to guarantee that the separation process is safe.

关键词： Moving Pulsating Ball Model(MPBM) Dynamics of stage separation Large amplitude sloshing Recoverable liquid launch vehicle Flight dynamics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion

引用

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1900-1911页

作者： Kwang Tae Son chang Hee Cho Myoung Gyun Kim Ji Woon Lee School of Mechanical Industrialand Manufacturing EngineeringOregon State UniversityCorvallis OR 97331USA Department of Materials Science Engineering Northwestern UniversityEvanston IL 60208USA Research Institute of Industrial Science and Technology(RIST) Pohang 37673Rep.of Korea Division of Advanced Materials Engineering Kongju National UniversityCheonan 31080Rep.of Korea Center for Advanced Materials and Parts of Powders Kongju National UniversityCheonan 31080Rep.of Korea

Hot torsion tests were performed on the Al-7Mg alloy at the temperature ranging from 300 to 500℃ and strain rates between 0.05 and 5 s^(-1) to explore the progressive dynamic recrystallization(DRX)and texture *** DRX behavior of the alloy manifested two distinct stages:Stage 1 at strain of≤2 and Stage 2 at strains of≥*** Stage 1,there was a slight increase in the DRXed grain fraction(X_(DRX))with predominance of discontinuous DRX(DDRX),followed by a modest change in X_(DRX) until the transition to Stage *** 2 was marked by an accelerated rate of DRX,culminating in a substantial final X_(DRX) of~*** backscattered diffraction(EBSD)analysis on a sample in Stage 2 revealed that continuous DRX(CDRX)predominantly occurred within the(121)[001]grains,whereas the(111)[110]grains underwent a geometric DRX(GDRX)evolution without a noticeable sub-grain ***,a modified Avrami’s DRX kinetics model was utilized to predict the microstructural refinement in the Al-7Mg alloy during the DRX *** this kinetics model did not accurately capture the DDRX behavior in Stage 1,it effectively simulated the DRX rate in Stage *** texture index was employed to assess the evolution of the texture isotropy during hot-torsion test,demonstrating significant improvement(>75%)in texture randomness before the commencement of Stage *** initial texture evolution is attributed to the rotation of parent grains and the substructure evolution,rather than to an increase in X_(DRX).

关键词： Al-7Mg alloys hot deformation hot torsion tests dynamic recrystazlliation microstructure texture

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：