检索结果-南通市图书馆

AWells-Riley/based cOVID-19 infectiousrisk assessment model combining both short rangeandroom scale effects

Building Simulation 2024年第1期17卷 93-111页

作者： Yinshuai Feng Yifan Fan Xiaoyu Luo Jian ge college of civil Engineering and Architecture Zhejiang UniversityHangzhouChina center for Balance Architecture Zhejiang UniversityHangzhouChina International Research center for Green Building and Low-carbon city International CampusZhejiang UniversityHainingChina

There is growing evidence of the high transmission potential of cOVID-19 through virus-laden *** aerosols are inhaled in various concentrations,an overall assessment of transmission risks at different indoor scales is ***,a comprehensive risk assessment method that evaluates the direct link between short-range and room-scale zones is stl *** this paper,a risk assessment model combining both short-range and room-scale effects is developed to obtain effective reproduction number in confined indoor environments,called Turbulent Jet Wells Riley(TJWR)*** with the viral load data and aerosol generation data of different human respiratory activities,the Monte carlo simulation method is applied to calculate the quanta emission rate,which further provides the input parameters of the TJWR *** known outbreaks(Hangzhou banquet hall X,Guangzhou restaurant Y,and Hong Kong restaurant z,china)are chosen to validate the TJWR *** show that the TJWR model is more efficient than the original Wells-Riley *** average relative error of the TJWR model ranges between 9%and 44%,while for the Wells-Riley model,it ranges between 57%and 78%.The TJWR model also proves that infection risk assessments using the well-mixed assumption can systematically underestimate the transmission risk for those close to the ***,there is a significant positive linear correlation between the total number of exposed individuals at the short-range and the effective reproduction *** newly developed TJWR model has great potential for rapid and real-time overall airborne transmission risk assessment in buildings and cities.

关键词： cOVID-19 airborne transmission infection risk Wells-Riley model Monte carlo simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flow Field Simulation and Parameter Analysis of Hydraulic Unbalanced Bionic Self-recovery Actuator for Rotary Equipment

引用

Journal of Bionic Engineering 2024年第1期21卷 325-343页

作者： Wei Li Xin Pan Dehong ge Jinji Gao Key Laboratory of Engine Health Monitoring-control and Networking of Ministry of Education Beijing University of Chemical TechnologyBeijing 100029China Beijing Key Laboratory of High-End Mechanical Equipment Health Monitoring and Self-Recovery Beijing University of Chemical TechnologyBeijing 100029China

The rotor is the most important component of rotating machinery,and the vibration produced by its mass unbalance has a serious influence on the secure and steady operation of the machine,so an effective online suppression technology is urgently needed.A new hydraulic unbalanced bionic self-recovery system is introduced,imitating the way of manually repairing faulty *** accomplish the effect of actuator mass redistribution,the technology employs pressurized air to drive the quantitative transfer of liquid in the reservoir cavity at opposite *** can complete the online adjustment of the equipment's balancing state and suppress the unbalanced vibration of equipment in real time,which gives the equipment the ability to maintain an autonomous health state and improve equipment *** composition and working principle of the system are introduced in detail,and the key performance parameters,such as the minimum running speed and the balancing liquid transfer speed,are analyzed *** fluid-solid coupling model of the actuator was established,and the two-phase flow from inside the hydraulic unbalanced bionic self-recovery actuator was simulated under multiple working conditions and the performance parameters were quantitatively analyzed.A balancing simulation test bed was built,and its effectiveness was verified by performance parameter tests and unbalanced bionic self-recovery *** experimental results show that the mass distribution adjustment of the balancing disk can be achieved using different viscosity balancing liquid,and the response of liquid viscosity 10 cSt is faster than that of liquid viscosity 100 cSt in the process of balancing liquid transfer,and the time is reduced by more than 75%;the system can reduce the simulated rotor amplitude from 18.3μm to 10.6μm online in real time,which provides technical support for the subsequent development of a new generation of bionic intelligent equipment.

关键词： Engineering self-recovery-Bionics Simulation analysis Self-recovery regulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Metal-organic-framework-derived copper-based catalyst for multicomponent c-S coupling reaction

引用

chinese Journal of chemical Engineering 2024年第6期70卷 1-8页

作者： Lixin chen Hui zhang Linxi Hou Xin ge Key Laboratory of Synthetic and Biological colloids Ministry of EducationSchool of Chemical and Material EngineeringJiangnan UniversityWuxi 214122China Department of Materials-Oriented chemical Engineering School of Chemical EngineeringFuzhou UniversityFuzhou 350116China Qingyuan Innovation Laboratory Quanzhou 362801China

copper-based metal-organic frameworks(cu-MOFs)are a promising multiphase catalyst for catalyzing c-S coupling reactions by virtue of their diverse structures and ***,the unpleasant odor and instability of the organosulfur,as well as the mass-transfer resistance that exists in multiphase catalysis,have often limited the catalytic application of cu-MOFs in c-S coupling *** this paper,a cu-MOFs catalyst modified by cetyltrimethylammonium bromide(cTAB)was designed to enhance mass transfer by increasing the adsorption of organic substrates using the long alkanes of ***,elemental sulfur was used to replace organosulfur to achieve a highly efficient and atom-economical multicomponent c-S coupling reaction.

关键词： Design copper-based metal-organic frameworks (cu-MOFs) Adsorption c-S coupling reaction Multiphase reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

3D coarse-grained DPM simulation of the MIP reaction-regeneration loop

引用

Particuology 2024年第6期89卷 57-66页

作者： Yanhao Ye Shuai zhang Ji Xu Wei ge State Key Laboratory of Mesoscience and Engineering(formerly State Key Laboratory of Multiphase complex Systems) Institute of Process EngineeringChinese Academy of SciencesBeijing100190China School of chemical Engineering University of Chinese Academy of SciencesBeijing100049China

The reactor-regenerator loop is the core facility of the maximizing iso-paraffin(MIP)*** the discrete particle method(DPM)simulation can provide detailed information at the particle scale,it has been unable to simulate such a complex loop system due to limitations of coarse-grained(cG)models,computing software,and *** this study,a newly proposed soft-shell cG-DPM model with a cG ratio of up to 800 is used to simulate a 3.5 Mt/a industrial-scale MIP reactor-regenerator *** solid fraction distribution obtained is found to agree well with in-situ *** properties including the distribution of solid fraction,gas and solid velocity,standard derivation of solid fraction with time,temporal distribution of the flow field,and particle residence time distribution are measured in the simulation,which are meaningful to better design and operate such systems in the future.

关键词： Discrete particle method coarse-grain Maximizing iso-paraffins Full-loop Reaction-regeneration system

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

H∞ Robustness for Distributed control in Autonomous Microgrids considering cyber Disturbances

引用

cSEE Journal of Power and Energy Systems 2024年第2期10卷 696-706页

作者： ge cao Guannan Lou Wei Gu Lina Sheng School of Electrical Engineering Southeast UniversityNanjing 210096China

The physical connections and logical relationships between microgrids and communication networks allow microgrids to develop into typical cyber-physical systems(cPSs).With the extensive use of open communication mechanisms,the impact of cyber disturbances in public communication networks cannot be *** this paper,a parameter optimal method for a distributed secondary controller based on the robust control theory and consensus algorithm is presented to enhance the robustness of a secondary control system under data disturbance,parameter perturbation,and time ***,a distributed secondary control strategy of microgrids is demonstrated that coordinates frequency and voltage restoration and power ***,considering the impact of cyber events on the secondary control,a distributed robust controller gain design method is proposed to satisfy the H∞ performance *** solution of the distributed robust control is transformed into a linear matrix in equation problem and latency margin is simultaneously ***,a test microgrid cPS is simulated with and without time delay to investigate the impact of cyber events on system operational states and the effectiveness and robustness of the proposed method.

关键词： cyber disturbance cyber-physical lsystem distributed control microgrid robust H∞control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Performance Enhancement of Single-Phase Immersion Liquid-cooled Data center Servers

引用

Journal of Thermal Science 2024年第5期33卷 1757-1772页

作者： ge Junlei XIA Feifan zHANG chengbin HUANG Yongping School of Energy and Environment Southeast UniversityNanjing 210096China Wuhan Digital Engineering Research Institute Wuhan 430205China

As the promising cooling method for the next generation of data centers,the internal heat transport mechanism and enhancement mechanism of single-phase immersion liquid-cooled(SPILc)systems are not yet well *** address this,a steady-state three-dimensional numerical model is constructed herein to analyze flow and thermal transport capacities in servers using SPILc and traditional air-cooling ***,this paper emphasizes the influence of component positioning,and underscores the benefits of optimizing coolant flow distribution using *** results indicate that the SPILc system outperforms the traditional air-cooling approach at the same inlet Reynolds number(Re).When Re=10000,the SPILc method reduces the maximum temperature by up to 70.13%,increases the average convective heat transfer coefficient by287.5%,and provides better overall thermal uniformity in data center ***,placing devices downstream of high-power components creates"thermal barriers"and degrades thermal transport for upstream devices due to increased flow *** spacing between high-power devices can lead to the formation of bypass channels,further deteriorating heat ***,the addition of baffles in the inlet section of SPILc systems effectively enhances heat dissipation *** maximize the heat dissipation capacity,minimizing bypass channels and optimizing the flow distribution of coolants are crucial.

关键词： single-phase immersion liquid-cooled performance enhancement data center

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimized the vanadium electrolyte with sulfate-phosphoric mixed acids to enhance the stable operation at high-temperature

引用

Frontiers of chemical Science and Engineering 2024年第2期18卷 13-26页

作者： Ling ge Tao Liu Yimin zhang Hong Liu School of Resource and Environmental Engineering Wuhan University of Science and TechnologyWuhan 430081China State Environmental Protection Key Laboratory of Mineral Metallurgical Resources Utilization and Pollution control Wuhan University of Science and TechnologyWuhan 430081China Hubei collaborative Innovation center for High Efficient Utilization of Vanadium Resources Wuhan University of Science and TechnologyWuhan 430081China Hubei Provincial Engineering Technology Research center of High Efficient cleaning Utilization for Shale Vanadium Resource Wuhan University of Science and TechnologyWuhan 430081China School of Resource and Environmental Engineering Wuhan University of TechnologyWuhan 430070China

Herein, the influence of the concentration design and comprehensive performance of the sulfate-phosphoric mixed acid system electrolyte is investigated to realize an electrolyte that maintains high energy density and stable operation at high temperatures. Static stability tests have shown that VOPO4 precipitation occurs only with vanadium(V) electrolyte. The concentration of vanadium ion of 2.0–2.2 mol·L^(–1), phosphoric acid of 0.10–0.15 mol·L^(–1), and sulfuric acid of 2.5–3.0 mol·L^(–1) are suitable for a vanadium redox flow battery in the temperature range from –20 to 50 ℃. The equations for predicting the viscosity and conductivity of electrolytes are obtained by the response surface method. The optimized electrolyte overcomes precipitation generation. It has 2.8 times higher energy density than the non-phosphate electrolyte, and a coulomb efficiency of 94.0% at 50 ℃. The sulfate-phosphoric mixed acid system electrolyte promotes the electrode reaction process, increases the current density, and reduces the resistance. This work systematically optimizes the concentrations of composition of positive and negative vanadium electrolytes with mixed sulfate-phosphoric acid. It provides a basis for the different valence states and comprehensive properties of sulfate-phosphoric mixed acid system vanadium electrolytes under extreme environments, guiding engineering applications.

关键词： all vanadium redox flow battery mixed-acid vanadium electrolyte concentration optimization response surface methodology high-temperature stability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

constructal design of a rectangular parallel phase change microchannel in a three-dimensional electronic device

引用

Science china(Technological Sciences) 2024年第5期67卷 1381-1390页

作者： zHANG JiWen FENG HuiJun cHEN Lingen ge YanLin Institute of Thermal Science and Power Engineering Wuhan Institute of TechnologyWuhan430205China college of Power Engineering Naval University of EngineeringWuhan430033China Hubei Provincial Engineering Technology Research center of Green chemical Equipment Wuhan430205China School of Mechanical&Electrical Engineering Wuhan Institute of TechnologyWuhan430205China

Based on constructal theory,a rectangular parallel phase change microchannel model in a three-dimensional electronic device(TDED)is established with R134a as the cooling *** on the minimization of a complex function(cF)composed of linear weighting sum of maximum temperature difference and pumping power consumption,constructal design of the TDED is conducted first;and then,maximum temperature difference and pumping power consumption are minimized by non-dominated sorting genetic algorithm-II *** results reveal that there exist an optimal mass flow rate(0.0012 kg/s)and a quadratic optimal aspect ratio(AR)(0.39)of the microchannel which lead to quadratic minimum cF(0.817).compared with the original value,the cF after optimization is reduced by 18.34%.Reducing the inlet temperature of cooling fluid and microchannel number appropriately can help to enhance the overall performance of *** using the artificial neural network and genetic algorithms in the toolboxes of Matlab software,the optimal AR gained in the Pareto solution set is located between 0.2–*** smallest deviation index among three discussed strategies is 0.346,and the corresponding optimal AR is 0.413,which is selected as the optimal design strategy of the microchannel in the TDED under multiple *** findings in this study can serve as theoretical guides for thermal designs of electronic devices.

关键词： constructal theory parallel microchannel evaporation phase change three-dimensional electronic device multi-objective optimization artificial neural network

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Gas–solid reactor optimization based on EMMS-DPM simulation and machine learning

引用

Particuology 2024年第6期89卷 131-143页

作者： Haolei zhang Aiqi zhu Ji Xu Wei ge State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China State Key Laboratory of Multiphase complex Systems Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China School of chemical Engineering University of Chinese Academy of SciencesBeijing 100049China Innovation Academy for Green Manufacture Chinese Academy of SciencesBeijing 100190China

Design,scaling-up,and optimization of industrial reactors mainly depend on step-by-step experiments and engineering experience,which is usually time-consuming,high cost,and high *** numerical simulation can reproduce high resolution details of hydrodynamics,thermal transfer,and reaction process in reactors,it is still challenging for industrial reactors due to huge computational *** this study,by combining the numerical simulation and artificial intelligence(AI)technology of machine learning(ML),a method is proposed to efficiently predict and optimize the performance of industrial reactors.A gas–solid fluidization reactor for the methanol to olefins process is taken as an example.1500 cases under different conditions are simulated by the coarse-grain discrete particle method based on the Energy-Minimization Multi-Scale model,and thus,the reactor performance data set is *** develop an efficient reactor performance prediction model influenced by multiple factors,the ML method is established including the ensemble learning strategy and automatic hyperparameter optimization technique,which has better performance than the methods based on the artificial neural ***,the operating conditions for highest yield of ethylene and propylene or lowest pressure drop are searched with the particle swarm optimization algorithm due to its strength to solve non-linear optimization *** show that decreasing the methanol inflow rate and increasing the catalyst inventory can maximize the yield,while decreasing methanol the inflow rate and reducing the catalyst inventory can minimize the pressure *** two objectives are thus conflicting,and the practical operations need to be compromised under different circumstance.

关键词： Discrete particle method Artificial intelligence Machine learning Particle swarm optimization Industrial reactor optimization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

引用

Journal of Rock Mechanics and geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang c.J.Wang W.V.Yue z.J.zhang z.Q.Yue Department of civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of geotechnical Engineering Tongji UniversityShanghaiChina Department of civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UcS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UcS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process constant drilling speed Soil improvement Quality assessment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：