检索结果-南通市图书馆

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability

在线全文

学校读者我要写书评

暂无评论

Science Bulletin 2024年第13期69卷 2071-2079页

作者： Zhihong bi Anping Zhang Gongrui Wang Cong dong Pratteek Das Xiaoyu Shi Zhong-Shuai wu State Key Laboratory of Catalysis Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023China University of Chinese Academy of Sciences Beijing 100049China Dalian National Laboratory of Clean Energy Chinese Academy of SciencesDalian 116023China

High-voltage and fast-charging LiCoO_(2)(LCO)is key to high-energy/power-density Li-ion ***,unstable surface structure and unfavorable electronic/ionic conductivity severely hinder its high-voltage fast-charging ***,we construct a Li/Na-B-Mg-Si-O-F-rich mixed ion/electron interface network on the 4.65 V LCO electrode to enhance its rate capability and long-term cycling ***,the resulting artificial hybrid conductive network enhances the reversible conversion of Co^(3+)/^(4+)/O_(2)/nredox by the interfacial ion–electron cooperation and suppresses interface side reactions,inducing an ultrathin yet compact cathode electrolyte ***,the derived near-surface Na+/Mg2+/Si^(4+)-pillared local intercalation structure greatly promotes the Li^(+)diffusion around the 4.55 V phase transition and stabilizes the cathode ***,excellent 3 C(1 C=274 mA g1)fast charging performance is demonstrated with 73.8%capacity retention over 1000 *** findings shed new insights to the fundamental mechanism of interfacial ion/electron synergy in stabilizing and enhancing fast-charging cathode materials.

关键词： High-voltage Fast-charging LiCoO_(2) Interfacial ion-electron cooperation Local intercalation

State-Based Opacity Verification of Networked Discrete Event Systems Using Labeled Petri Nets

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第5期11卷 1274-1291页

作者： Yifan dong Naiqi wu Zhiwu Li The authors are with the Institute of Systems Engineering Macao University of Science and TechnologyTaipa 999078MacaoChina

The opaque property plays an important role in the operation of a security-critical system,implying that pre-defined secret information of the system is not able to be inferred through partially observing its *** paper addresses the verification of current-state,initial-state,infinite-step,and K-step opacity of networked discrete event systems modeled by labeled Petri nets,where communication losses and delays are *** on the symbolic technique for the representation of states in Petri nets,an observer and an estimator are designed for the verification of current-state and initial-state opacity,***,we propose a structure called an I-observer that is combined with secret states to verify whether a networked discrete event system is infinite-step opaque or K-step *** to the utilization of symbolic approaches for the state-based opacity verification,the computation of the reachability graphs of labeled Petri nets is avoided,which dramatically reduces the computational overheads stemming from networked discrete event systems.

关键词： infinite system symbolic

Preparation and characterization of HMX/EVA/hBNNSs microcomposites with improved thermal stability and reduced sensitivity

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2021年第2期17卷 650-656页

作者： Yue Yang Xiao-dong Li Yan-tao Sun Jian-an Tian Hui-min Liu bi-dong wu Jing-yu Wang School of Environment and Safety Engineering North University of ChinaTaiyuan030051ShanxiChina Shanxi Engineering Technology Research Center for Ultrafine Powder North University of ChinaTaiyuan030051ShanxiChina

Hexagonal boron nitride nanosheets(HBNNSs)have huge potential in the field of coating materials owing to their remarkable chemical stability,mechanical strength and thermal ***-layer hBNNSs were obtained by a liquid-phase exfoliation of h-BN powders and incorporated into EVA coatings for improving the safety performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX).HBNNSs and ethylene-vinyl acetate copolymer(EVA)were introduced to HMX by a solvent-slurry *** comparison,the HMX/EVA and HMX/EVA/graphene(HMX/EVA/G)composites were also prepared by a similar *** morphology,crystal form,surface element distribution,thermal decomposition property and impact sensitivity of HMX/EVA/hBNNSs composites were contrastively *** showed that as prepared HMX/EVA/hBNNSs composites were well coated with hBNNSs and EVA,and exhibited better thermal stability and lower impact sensitivity than that of HMX/EVA and HMX/EVA/G composites,suggesting superior performance of desensitization of hBNNSs in explosives.

关键词： Energetic materials 2D(two dimensional)materials HBNNSs(hexagonal boron nitride nanosheets) HMX(1,3,5,7-Tetranitro-1,3,5,7-tetrazocane) Thermal stability Mechanical sensitivity

Role of ferroptosis in fibrosis:From mechanism to potential therapy

在线全文

学校读者我要写书评

暂无评论

Chinese Medical Journal 2024年第7期137卷 806-817页

作者： Xuemeng Qiu Qing bi Jiyue wu Zejia Sun Wei Wang Department of Urology Beijing Chao-Yang HospitalCapital Medical UniversityBeijing 100020China Department of Surgery Third Clinical Medical CollegeCapital Medical UniversityBeijing 100020China Urinary and Nephropathy Center Beijing Chao-Yang HospitalCapital Medical UniversityBeijing 100020China Institute of Urology Capital Medical UniversityBeijing 100020China

Fibrosis,which is a manifestation of the physiological response to injury characterized by excessive accumulation of extracellular matrix components,is a ubiquitous outcome of the repair ***,in cases of repetitive or severe injury,fibrosis may become dysregulated,leading to a pathological state and organ *** recent years,a novel form of regulated cell death,referred to as ferroptosis,has been identified as a possible contributor to fibrosis;it is characterized by iron-mediated lipid *** has garnered attention due to the growing body of evidence linking ferroptosis and fibrogenesis,which is believed to be driven by underlying inflammation and immune *** the increasing interest in the relationship between ferroptosis and fibrosis,a comprehensive understanding of the precise role that ferroptosis plays in the formation of fibrotic tissue remains *** review seeks to synthesize previous research related to the *** categorized the different direct and indirect mechanisms by which ferroptosis may contribute to fibrosis into three categories:(1)iron overload toxicity;(2)ferroptosis-evoked necroinflammation,with a focus on ferroptosis and macrophage interplay;and(3)ferroptosis-associated pro-fibrotic factors and ***,the review considers the potential implications of these findings and highlights the utilization of ferroptosis-targeted therapies as a promising strategy for mitigating the progression of *** conclusion,novel anti-fibrotic treatments targeting ferroptosis could be an effective treatment for fibrosis.

关键词： Ferroptosis Fibrosis Anti-fibrotic Iron metabolism Necroinflammation Epithelial-mesenchymal transition

Insensitive energetic microspheres DAAF/RDX fabricated by facile molecular self-assembly

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2021年第5期17卷 1775-1781页

作者： Shu-jie Liu bi-dong wu Jia-ni Xie Zhi-min Li Chong-wei An Jing-yu Wang Xiao-dong Li School of Environment and Safety Engineering North University of ChinaShanxi030051China State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081China

Insensitive energetic materials are promising in the defense weapons ***,energetic materials still suffer from great challenges and the concern about their safety limits their *** this work,insensitive energetic explosive 3,30-diamino-4,40-azoxyfurazan/hexahydro-1,3,5-trinitro-1,3,5-triazine(DAAF/RDX)microspheres were fabricated by self-assembly ***-like DAAF/RDX was prepared by mechanical ball milling for ***/RDX composites with different mass ratios(90:10,80:20,and 70:30)were *** morphologies and structures of as-obtained DAAF/RDX composites were characterized by scanning electron microscopy(SEM),powder x-ray diffraction(PXRD)and fourier transform infrared spectroscopy(FT-IR).The results showed that DAAF/RDX microspheres exhibited regular shaped microspheres with sizes from 0.5 to 1.2 *** was no crystal transition during the modification *** thermal properties of as-obtained materials were then evaluated by differential scanning calorimetry(DSC)and materials studio ***/RDX microspheres showed an advanced decomposition peak temperature compared with rod-like DAAF/*** binding energy and peak temperature values at zeroβ_(i)(T_(P0))of DAAF/RDX(90:10)increased by 36.77 kJ/mol,1.6℃,and 58.11 kJ/mol,12.3℃compared to DAAF/RDX(80:20)and DAAF/RDX(70:30),indicating the better thermal stability of DAAF/RDX(90:10).The characteristic drop height(H_(50))of DAAF/RDX(higher than 100 cm)composites was higher than that of raw RDX(25 cm),suggesting significant improvements in mechanical *** preparation of DAAF/RDX microspheres is promising for the desensitization of RDX and useful for the formation of other materials and future wide applications.

关键词： DAAF RDX Insensitive Energetic microspheres Thermal stability

Brain Cognition Mechanism-Inspired Hierarchical Navigation Method for Mobile Robots

在线全文

学校读者我要写书评

暂无评论

Journal of bionic Engineering 2024年第2期21卷 852-865页

作者： Qiang Zou Chengdong wu Ming Cong dong Liu Faculty of Robot Science and Engineering Northeastern UniversityShenyang110819China School of Mechanical Engineering Dalian University of TechnologyDalian116024China

Autonomous navigation is a fundamental problem in *** methods generally build point cloud map or dense feature map in perceptual space;due to lack of cognition and memory formation mechanism,traditional methods exist poor robustness and low cognitive *** a new navigation technology that draws inspiration from mammal’s navigation,bionic navigation method can map perceptual information into cognitive space,and have strong autonomy and environment *** improve the robot’s autonomous navigation ability,this paper proposes a cognitive map-based hierarchical navigation ***,the mammals’navigation-related grid cells and head direction cells are modeled to provide the robots with location *** then a global path planning strategy based on cognitive map is proposed,which can anticipate one preferred global path to the target with high efficiency and short ***,a hierarchical motion controlling method is proposed,with which the target navigation can be divided into several sub-target navigation,and the mobile robot can reach to these sub-targets with high confidence ***,some experiments are implemented,the results show that the proposed path planning method can avoid passing through obstacles and obtain one preferred global path to the target with high efficiency,and the time cost does not increase extremely with the increase of experience nodes *** motion controlling results show that the mobile robot can arrive at the target successfully only depending on its self-motion information,which is an effective attempt and reflects strong bionic properties.

关键词： bionic navigation Spatial localization cells Global path planning Hierarchical motion controlling

Investigation of high rate mechanical flow followed by ignition for high-energy propellant under dynamic extrusion loading

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 336-347页

作者： Liying dong Yanqing wu Kun Yang Xiao Hou State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China

Investigating the ignition response of nitrate ester plasticized polyether(NEPE) propellant under dynamic extrusion loading is of great significant at least for two cases. Firstly, it helps to understand the mechanism and conditions of unwanted ignition inside charged propellant under accident ***, evaluates the risk of a shell crevice in a solid rocket motor(SRM) under a falling or overturning scene. In the present study, an innovative visual crevice extrusion experiment is designed using a dropweight apparatus. The dynamic responses of NEPE propellant during extrusion loading, including compaction and compression, rapid shear flow into the crevice, stress concentration, and ignition reaction, have been firstly observed using a high-performance high-speed camera. The ignition reaction is observed in the triangular region of the NEPE propellant sample above the crevice when the drop weight velocity was 1.90 m/s. Based on the user material subroutine interface UMAT provided by finite element software LS-DYNA, a viscoelastic-plastic model and dual ignition criterion related to plastic shear dissipation are developed and applied to the local ignition response analysis under crevice extrusion conditions. The stress concentration occurs in the crevice location of the propellant sample, the shear stress is relatively large, the effective plastic work is relatively large, and the ignition reaction is easy to occur. When the sample thickness decreases from 5 mm to 2.5 mm, the shear stress increases from 22.3 MPa to 28.6 MPa, the critical value of effective plastic work required for ignition is shortened from 1280 μs to 730 μs, and the triangular area is easily triggering an ignition reaction. The propellant sample with a small thickness is more likely to stress concentration, resulting in large shear stress and effective work, triggering an ignition reaction.

关键词： NEPE propellant Crevice extrusion Shear flow Sample thickness Ignition reaction

Method for triangular fuzzy multiple attribute decision making based on two-dimensional density operator method

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Engineering and Electronics 2024年第1期35卷 178-185页

作者： LIN Youliang LI wu LIU Gang HUANG dong School of Economics and Management Hunan Institute of Science and TechnologyYueyang 414000China Hunan Vocational College for Nationalities Yueyang 414000China School of Information Science and Engineering Hunan Institute of Science and TechnologyYueyang 414000China

Aiming at the triangular fuzzy(TF)multi-attribute decision making(MADM)problem with a preference for the distribution density of attribute(DDA),a decision making method with TF number two-dimensional density(TFTD)operator is proposed based on the density operator theory for the decision maker(DM).Firstly,a simple TF vector clustering method is proposed,which considers the feature of TF number and the geometric distance of ***,the least deviation sum of squares method is used in the program model to obtain the density weight ***,two TFTD operators are defined,and the MADM method based on the TFTD operator is ***,a numerical example is given to illustrate the superiority of this method,which can not only solve the TF MADM problem with a preference for the DDA but also help the DM make an overall comparison.

关键词： fuzzy decision making clustering density operator multi-attribute decision making(MADM)

Sensitivity analysis of modeling parameters to soot and PAHs prediction in ethylene inverse diffusion flame

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第2期67卷 486-498页

作者： wu bingKun LI TianJiao LIU dong MIIT Key Laboratory of Thermal Control of Electronic Equipment School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China Advanced Combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and Technology Nanjing 210094China

The soot formation model based on inverse ethylene diffusion flames was performed to study the sensitivity of the soot formation process to the prediction *** effects of efficiency parameters such as soot inception,surface growth and coagulation on the simulation results were studied by using the adjustable efficiency *** addition,the reversible soot model and conjugate heat transfer(CHT)model were also introduced to explore their *** indicated that,among adjustable efficiency parameters,the nucleation efficiency had the greatest influence on the predicted soot and PAHs distributions,while the Habstraction-C2H2-addition(HACA)process and PAH adsorption surface growth efficiencies impacted *** adjustable efficiency parameters had a significant effect on the concentration of soot gaseous precursors and soot particles,but their effects on temperature,gas phase molecules,and intermediate species were not *** the nucleation efficiency increased from 2×10^(-6)to 1×10^(-4),the predicted value of the integrated soot was increased by nearly 50%,and the maximum primary particle number density and the number of aggregates were increased by an order of *** maximum concentration of BAPYR was ***,the peak temperature along the axial direction increased by only 3.5 *** the reversible soot model,the approximation results of the adjustable efficiency parameters could be modified,which showed the feasibility of the *** use of the CHT model promoted pyrolysis of the fuel below the outlet of the fuel tube,with high-temperature zones,soot zones,and PAHs zones moving towards higher flame ***,when using the reversible model and the CHT model,the maximum soot volume fraction decreased by 39%compared with the basic efficiency parameters,while the concentration of BAPYR increased by 162%,and the concentrations of gas phase species were decreased.

关键词： inverse diffusion flames soot formation soot model ethylene